File: //usr/local/share/info/autoconf.info
This is autoconf.info, produced by makeinfo version 6.8 from
autoconf.texi.
This manual (13 January 2022) is for GNU Autoconf (version 2.69), a
package for creating scripts to configure source code packages using
templates and an M4 macro package.
Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
Permission is granted to copy, distribute and/or modify this
document under the terms of the GNU Free Documentation License,
Version 1.3 or any later version published by the Free Software
Foundation; with no Invariant Sections, no Front-Cover texts, and
no Back-Cover Texts. A copy of the license is included in the
section entitled "GNU Free Documentation License."
INFO-DIR-SECTION Programming & development tools
START-INFO-DIR-ENTRY
* Autoconf: (autoconf). Create source code configuration scripts.
END-INFO-DIR-ENTRY
File: autoconf.info, Node: Top, Next: Introduction, Up: (dir)
Autoconf
********
This manual (13 January 2022) is for GNU Autoconf (version 2.69), a
package for creating scripts to configure source code packages using
templates and an M4 macro package.
Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
Permission is granted to copy, distribute and/or modify this
document under the terms of the GNU Free Documentation License,
Version 1.3 or any later version published by the Free Software
Foundation; with no Invariant Sections, no Front-Cover texts, and
no Back-Cover Texts. A copy of the license is included in the
section entitled "GNU Free Documentation License."
* Menu:
* Introduction:: Autoconf's purpose, strengths, and weaknesses
* The GNU Build System:: A set of tools for portable software packages
* Making configure Scripts:: How to organize and produce Autoconf scripts
* Setup:: Initialization and output
* Existing Tests:: Macros that check for particular features
* Writing Tests:: How to write new feature checks
* Results:: What to do with results from feature checks
* Programming in M4:: Layers on top of which Autoconf is written
* Programming in M4sh:: Shell portability layer
* Writing Autoconf Macros:: Adding new macros to Autoconf
* Portable Shell:: Shell script portability pitfalls
* Portable Make:: Makefile portability pitfalls
* Portable C and C++:: C and C++ portability pitfalls
* Manual Configuration:: Selecting features that can't be guessed
* Site Configuration:: Local defaults for 'configure'
* Running configure Scripts:: How to use the Autoconf output
* config.status Invocation:: Recreating a configuration
* Obsolete Constructs:: Kept for backward compatibility
* Using Autotest:: Creating portable test suites
* FAQ:: Frequent Autoconf Questions, with answers
* History:: History of Autoconf
* GNU Free Documentation License:: License for copying this manual
* Indices:: Indices of symbols, concepts, etc.
-- The Detailed Node Listing --
The GNU Build System
* Automake:: Escaping makefile hell
* Gnulib:: The GNU portability library
* Libtool:: Building libraries portably
* Pointers:: More info on the GNU build system
Making 'configure' Scripts
* Writing Autoconf Input:: What to put in an Autoconf input file
* autoscan Invocation:: Semi-automatic 'configure.ac' writing
* ifnames Invocation:: Listing the conditionals in source code
* autoconf Invocation:: How to create configuration scripts
* autoreconf Invocation:: Remaking multiple 'configure' scripts
Writing 'configure.ac'
* Shell Script Compiler:: Autoconf as solution of a problem
* Autoconf Language:: Programming in Autoconf
* Autoconf Input Layout:: Standard organization of 'configure.ac'
Initialization and Output Files
* Initializing configure:: Option processing etc.
* Versioning:: Dealing with Autoconf versions
* Notices:: Copyright, version numbers in 'configure'
* Input:: Where Autoconf should find files
* Output:: Outputting results from the configuration
* Configuration Actions:: Preparing the output based on results
* Configuration Files:: Creating output files
* Makefile Substitutions:: Using output variables in makefiles
* Configuration Headers:: Creating a configuration header file
* Configuration Commands:: Running arbitrary instantiation commands
* Configuration Links:: Links depending on the configuration
* Subdirectories:: Configuring independent packages together
* Default Prefix:: Changing the default installation prefix
Substitutions in Makefiles
* Preset Output Variables:: Output variables that are always set
* Installation Directory Variables:: Other preset output variables
* Changed Directory Variables:: Warnings about 'datarootdir'
* Build Directories:: Supporting multiple concurrent compiles
* Automatic Remaking:: Makefile rules for configuring
Configuration Header Files
* Header Templates:: Input for the configuration headers
* autoheader Invocation:: How to create configuration templates
* Autoheader Macros:: How to specify CPP templates
Existing Tests
* Common Behavior:: Macros' standard schemes
* Alternative Programs:: Selecting between alternative programs
* Files:: Checking for the existence of files
* Libraries:: Library archives that might be missing
* Library Functions:: C library functions that might be missing
* Header Files:: Header files that might be missing
* Declarations:: Declarations that may be missing
* Structures:: Structures or members that might be missing
* Types:: Types that might be missing
* Compilers and Preprocessors:: Checking for compiling programs
* System Services:: Operating system services
* Posix Variants:: Special kludges for specific Posix variants
* Erlang Libraries:: Checking for the existence of Erlang libraries
Common Behavior
* Standard Symbols:: Symbols defined by the macros
* Default Includes:: Includes used by the generic macros
Alternative Programs
* Particular Programs:: Special handling to find certain programs
* Generic Programs:: How to find other programs
Library Functions
* Function Portability:: Pitfalls with usual functions
* Particular Functions:: Special handling to find certain functions
* Generic Functions:: How to find other functions
Header Files
* Header Portability:: Collected knowledge on common headers
* Particular Headers:: Special handling to find certain headers
* Generic Headers:: How to find other headers
Declarations
* Particular Declarations:: Macros to check for certain declarations
* Generic Declarations:: How to find other declarations
Structures
* Particular Structures:: Macros to check for certain structure members
* Generic Structures:: How to find other structure members
Types
* Particular Types:: Special handling to find certain types
* Generic Types:: How to find other types
Compilers and Preprocessors
* Specific Compiler Characteristics:: Some portability issues
* Generic Compiler Characteristics:: Language independent tests and features
* C Compiler:: Checking its characteristics
* C++ Compiler:: Likewise
* Objective C Compiler:: Likewise
* Objective C++ Compiler:: Likewise
* Erlang Compiler and Interpreter:: Likewise
* Fortran Compiler:: Likewise
* Go Compiler:: Likewise
Writing Tests
* Language Choice:: Selecting which language to use for testing
* Writing Test Programs:: Forging source files for compilers
* Running the Preprocessor:: Detecting preprocessor symbols
* Running the Compiler:: Detecting language or header features
* Running the Linker:: Detecting library features
* Runtime:: Testing for runtime features
* Systemology:: A zoology of operating systems
* Multiple Cases:: Tests for several possible values
Writing Test Programs
* Guidelines:: General rules for writing test programs
* Test Functions:: Avoiding pitfalls in test programs
* Generating Sources:: Source program boilerplate
Results of Tests
* Defining Symbols:: Defining C preprocessor symbols
* Setting Output Variables:: Replacing variables in output files
* Special Chars in Variables:: Characters to beware of in variables
* Caching Results:: Speeding up subsequent 'configure' runs
* Printing Messages:: Notifying 'configure' users
Caching Results
* Cache Variable Names:: Shell variables used in caches
* Cache Files:: Files 'configure' uses for caching
* Cache Checkpointing:: Loading and saving the cache file
Programming in M4
* M4 Quotation:: Protecting macros from unwanted expansion
* Using autom4te:: The Autoconf executables backbone
* Programming in M4sugar:: Convenient pure M4 macros
* Debugging via autom4te:: Figuring out what M4 was doing
M4 Quotation
* Active Characters:: Characters that change the behavior of M4
* One Macro Call:: Quotation and one macro call
* Quoting and Parameters:: M4 vs. shell parameters
* Quotation and Nested Macros:: Macros calling macros
* Changequote is Evil:: Worse than INTERCAL: M4 + changequote
* Quadrigraphs:: Another way to escape special characters
* Balancing Parentheses:: Dealing with unbalanced parentheses
* Quotation Rule Of Thumb:: One parenthesis, one quote
Using 'autom4te'
* autom4te Invocation:: A GNU M4 wrapper
* Customizing autom4te:: Customizing the Autoconf package
Programming in M4sugar
* Redefined M4 Macros:: M4 builtins changed in M4sugar
* Diagnostic Macros:: Diagnostic messages from M4sugar
* Diversion support:: Diversions in M4sugar
* Conditional constructs:: Conditions in M4
* Looping constructs:: Iteration in M4
* Evaluation Macros:: More quotation and evaluation control
* Text processing Macros:: String manipulation in M4
* Number processing Macros:: Arithmetic computation in M4
* Set manipulation Macros:: Set manipulation in M4
* Forbidden Patterns:: Catching unexpanded macros
Programming in M4sh
* Common Shell Constructs:: Portability layer for common shell constructs
* Polymorphic Variables:: Support for indirect variable names
* Initialization Macros:: Macros to establish a sane shell environment
* File Descriptor Macros:: File descriptor macros for input and output
Writing Autoconf Macros
* Macro Definitions:: Basic format of an Autoconf macro
* Macro Names:: What to call your new macros
* Reporting Messages:: Notifying 'autoconf' users
* Dependencies Between Macros:: What to do when macros depend on other macros
* Obsoleting Macros:: Warning about old ways of doing things
* Coding Style:: Writing Autoconf macros à la Autoconf
Dependencies Between Macros
* Prerequisite Macros:: Ensuring required information
* Suggested Ordering:: Warning about possible ordering problems
* One-Shot Macros:: Ensuring a macro is called only once
Portable Shell Programming
* Shellology:: A zoology of shells
* Invoking the Shell:: Invoking the shell as a command
* Here-Documents:: Quirks and tricks
* File Descriptors:: FDs and redirections
* Signal Handling:: Shells, signals, and headaches
* File System Conventions:: File names
* Shell Pattern Matching:: Pattern matching
* Shell Substitutions:: Variable and command expansions
* Assignments:: Varying side effects of assignments
* Parentheses:: Parentheses in shell scripts
* Slashes:: Slashes in shell scripts
* Special Shell Variables:: Variables you should not change
* Shell Functions:: What to look out for if you use them
* Limitations of Builtins:: Portable use of not so portable /bin/sh
* Limitations of Usual Tools:: Portable use of portable tools
Portable Make Programming
* $< in Ordinary Make Rules:: $< in ordinary rules
* Failure in Make Rules:: Failing portably in rules
* Special Chars in Names:: Special Characters in Macro Names
* Backslash-Newline-Empty:: Empty lines after backslash-newline
* Backslash-Newline Comments:: Spanning comments across line boundaries
* Long Lines in Makefiles:: Line length limitations
* Macros and Submakes:: 'make macro=value' and submakes
* The Make Macro MAKEFLAGS:: '$(MAKEFLAGS)' portability issues
* The Make Macro SHELL:: '$(SHELL)' portability issues
* Parallel Make:: Parallel 'make' quirks
* Comments in Make Rules:: Other problems with Make comments
* Newlines in Make Rules:: Using literal newlines in rules
* Comments in Make Macros:: Other problems with Make comments in macros
* Trailing whitespace in Make Macros:: Macro substitution problems
* Command-line Macros and whitespace:: Whitespace trimming of values
* obj/ and Make:: Don't name a subdirectory 'obj'
* make -k Status:: Exit status of 'make -k'
* VPATH and Make:: 'VPATH' woes
* Single Suffix Rules:: Single suffix rules and separated dependencies
* Timestamps and Make:: Subsecond timestamp resolution
'VPATH' and Make
* Variables listed in VPATH:: 'VPATH' must be literal on ancient hosts
* VPATH and Double-colon:: Problems with '::' on ancient hosts
* $< in Explicit Rules:: '$<' does not work in ordinary rules
* Automatic Rule Rewriting:: 'VPATH' goes wild on Solaris
* Tru64 Directory Magic:: 'mkdir' goes wild on Tru64
* Make Target Lookup:: More details about 'VPATH' lookup
Portable C and C++ Programming
* Varieties of Unportability:: How to make your programs unportable
* Integer Overflow:: When integers get too large
* Preprocessor Arithmetic:: '#if' expression problems
* Null Pointers:: Properties of null pointers
* Buffer Overruns:: Subscript errors and the like
* Volatile Objects:: 'volatile' and signals
* Floating Point Portability:: Portable floating-point arithmetic
* Exiting Portably:: Exiting and the exit status
Integer Overflow
* Integer Overflow Basics:: Why integer overflow is a problem
* Signed Overflow Examples:: Examples of code assuming wraparound
* Optimization and Wraparound:: Optimizations that break uses of wraparound
* Signed Overflow Advice:: Practical advice for signed overflow issues
* Signed Integer Division:: 'INT_MIN / -1' and 'INT_MIN % -1'
Manual Configuration
* Specifying Target Triplets:: Specifying target triplets
* Canonicalizing:: Getting the canonical system type
* Using System Type:: What to do with the system type
Site Configuration
* Help Formatting:: Customizing 'configure --help'
* External Software:: Working with other optional software
* Package Options:: Selecting optional features
* Pretty Help Strings:: Formatting help string
* Option Checking:: Controlling checking of 'configure' options
* Site Details:: Configuring site details
* Transforming Names:: Changing program names when installing
* Site Defaults:: Giving 'configure' local defaults
Transforming Program Names When Installing
* Transformation Options:: 'configure' options to transform names
* Transformation Examples:: Sample uses of transforming names
* Transformation Rules:: Makefile uses of transforming names
Running 'configure' Scripts
* Basic Installation:: Instructions for typical cases
* Compilers and Options:: Selecting compilers and optimization
* Multiple Architectures:: Compiling for multiple architectures at once
* Installation Names:: Installing in different directories
* Optional Features:: Selecting optional features
* Particular Systems:: Particular systems
* System Type:: Specifying the system type
* Sharing Defaults:: Setting site-wide defaults for 'configure'
* Defining Variables:: Specifying the compiler etc.
* configure Invocation:: Changing how 'configure' runs
Obsolete Constructs
* Obsolete config.status Use:: Obsolete convention for 'config.status'
* acconfig Header:: Additional entries in 'config.h.in'
* autoupdate Invocation:: Automatic update of 'configure.ac'
* Obsolete Macros:: Backward compatibility macros
* Autoconf 1:: Tips for upgrading your files
* Autoconf 2.13:: Some fresher tips
Upgrading From Version 1
* Changed File Names:: Files you might rename
* Changed Makefiles:: New things to put in 'Makefile.in'
* Changed Macros:: Macro calls you might replace
* Changed Results:: Changes in how to check test results
* Changed Macro Writing:: Better ways to write your own macros
Upgrading From Version 2.13
* Changed Quotation:: Broken code which used to work
* New Macros:: Interaction with foreign macros
* Hosts and Cross-Compilation:: Bugward compatibility kludges
* AC_LIBOBJ vs LIBOBJS:: LIBOBJS is a forbidden token
* AC_ACT_IFELSE vs AC_TRY_ACT:: A more generic scheme for testing sources
Generating Test Suites with Autotest
* Using an Autotest Test Suite:: Autotest and the user
* Writing Testsuites:: Autotest macros
* testsuite Invocation:: Running 'testsuite' scripts
* Making testsuite Scripts:: Using autom4te to create 'testsuite'
Using an Autotest Test Suite
* testsuite Scripts:: The concepts of Autotest
* Autotest Logs:: Their contents
Frequent Autoconf Questions, with answers
* Distributing:: Distributing 'configure' scripts
* Why GNU M4:: Why not use the standard M4?
* Bootstrapping:: Autoconf and GNU M4 require each other?
* Why Not Imake:: Why GNU uses 'configure' instead of Imake
* Defining Directories:: Passing 'datadir' to program
* Autom4te Cache:: What is it? Can I remove it?
* Present But Cannot Be Compiled:: Compiler and Preprocessor Disagree
* Expanded Before Required:: Expanded Before Required
* Debugging:: Debugging 'configure' scripts
History of Autoconf
* Genesis:: Prehistory and naming of 'configure'
* Exodus:: The plagues of M4 and Perl
* Leviticus:: The priestly code of portability arrives
* Numbers:: Growth and contributors
* Deuteronomy:: Approaching the promises of easy configuration
Indices
* Environment Variable Index:: Index of environment variables used
* Output Variable Index:: Index of variables set in output files
* Preprocessor Symbol Index:: Index of C preprocessor symbols defined
* Cache Variable Index:: Index of documented cache variables
* Autoconf Macro Index:: Index of Autoconf macros
* M4 Macro Index:: Index of M4, M4sugar, and M4sh macros
* Autotest Macro Index:: Index of Autotest macros
* Program & Function Index:: Index of those with portability problems
* Concept Index:: General index
File: autoconf.info, Node: Introduction, Next: The GNU Build System, Prev: Top, Up: Top
1 Introduction
**************
A physicist, an engineer, and a computer scientist were discussing the
nature of God. "Surely a Physicist," said the physicist, "because
early in the Creation, God made Light; and you know, Maxwell's
equations, the dual nature of electromagnetic waves, the relativistic
consequences..." "An Engineer!," said the engineer, "because
before making Light, God split the Chaos into Land and Water; it takes a
hell of an engineer to handle that big amount of mud, and orderly
separation of solids from liquids..." The computer scientist
shouted: "And the Chaos, where do you think it was coming from, hmm?"
--Anonymous
Autoconf is a tool for producing shell scripts that automatically
configure software source code packages to adapt to many kinds of
Posix-like systems. The configuration scripts produced by Autoconf are
independent of Autoconf when they are run, so their users do not need to
have Autoconf.
The configuration scripts produced by Autoconf require no manual user
intervention when run; they do not normally even need an argument
specifying the system type. Instead, they individually test for the
presence of each feature that the software package they are for might
need. (Before each check, they print a one-line message stating what
they are checking for, so the user doesn't get too bored while waiting
for the script to finish.) As a result, they deal well with systems
that are hybrids or customized from the more common Posix variants.
There is no need to maintain files that list the features supported by
each release of each variant of Posix.
For each software package that Autoconf is used with, it creates a
configuration script from a template file that lists the system features
that the package needs or can use. After the shell code to recognize
and respond to a system feature has been written, Autoconf allows it to
be shared by many software packages that can use (or need) that feature.
If it later turns out that the shell code needs adjustment for some
reason, it needs to be changed in only one place; all of the
configuration scripts can be regenerated automatically to take advantage
of the updated code.
Those who do not understand Autoconf are condemned to reinvent it,
poorly. The primary goal of Autoconf is making the _user's_ life
easier; making the _maintainer's_ life easier is only a secondary goal.
Put another way, the primary goal is not to make the generation of
'configure' automatic for package maintainers (although patches along
that front are welcome, since package maintainers form the user base of
Autoconf); rather, the goal is to make 'configure' painless, portable,
and predictable for the end user of each "autoconfiscated" package. And
to this degree, Autoconf is highly successful at its goal -- most
complaints to the Autoconf list are about difficulties in writing
Autoconf input, and not in the behavior of the resulting 'configure'.
Even packages that don't use Autoconf will generally provide a
'configure' script, and the most common complaint about these
alternative home-grown scripts is that they fail to meet one or more of
the GNU Coding Standards (*note (standards)Configuration::) that users
have come to expect from Autoconf-generated 'configure' scripts.
The Metaconfig package is similar in purpose to Autoconf, but the
scripts it produces require manual user intervention, which is quite
inconvenient when configuring large source trees. Unlike Metaconfig
scripts, Autoconf scripts can support cross-compiling, if some care is
taken in writing them.
Autoconf does not solve all problems related to making portable
software packages--for a more complete solution, it should be used in
concert with other GNU build tools like Automake and Libtool. These
other tools take on jobs like the creation of a portable, recursive
makefile with all of the standard targets, linking of shared libraries,
and so on. *Note The GNU Build System::, for more information.
Autoconf imposes some restrictions on the names of macros used with
'#if' in C programs (*note Preprocessor Symbol Index::).
Autoconf requires GNU M4 version 1.4.6 or later in order to generate
the scripts. It uses features that some versions of M4, including GNU
M4 1.3, do not have. Autoconf works better with GNU M4 version 1.4.14
or later, though this is not required.
*Note Autoconf 1::, for information about upgrading from version 1.
*Note History::, for the story of Autoconf's development. *Note FAQ::,
for answers to some common questions about Autoconf.
See the Autoconf web page (http://www.gnu.org/software/autoconf/) for
up-to-date information, details on the mailing lists, pointers to a list
of known bugs, etc.
Mail suggestions to the Autoconf mailing list <autoconf@gnu.org>.
Past suggestions are archived
(http://lists.gnu.org/archive/html/autoconf/).
Mail bug reports to the Autoconf Bugs mailing list
<bug-autoconf@gnu.org>. Past bug reports are archived
(http://lists.gnu.org/archive/html/bug-autoconf/).
If possible, first check that your bug is not already solved in
current development versions, and that it has not been reported yet. Be
sure to include all the needed information and a short 'configure.ac'
that demonstrates the problem.
Autoconf's development tree is accessible via 'git'; see the Autoconf
Summary (http://savannah.gnu.org/projects/autoconf/) for details, or
view the actual repository
(http://git.sv.gnu.org/gitweb/?p=autoconf.git). Anonymous CVS access is
also available, see 'README' for more details. Patches relative to the
current 'git' version can be sent for review to the Autoconf Patches
mailing list <autoconf-patches@gnu.org>, with discussion on prior
patches archived (http://lists.gnu.org/archive/html/autoconf-patches/);
and all commits are posted in the read-only Autoconf Commit mailing list
<autoconf-commit@gnu.org>, which is also archived
(http://lists.gnu.org/archive/html/autoconf-commit/).
Because of its mission, the Autoconf package itself includes only a
set of often-used macros that have already demonstrated their
usefulness. Nevertheless, if you wish to share your macros, or find
existing ones, see the Autoconf Macro Archive
(http://www.gnu.org/software/autoconf-archive/), which is kindly run by
Peter Simons <simons@cryp.to>.
File: autoconf.info, Node: The GNU Build System, Next: Making configure Scripts, Prev: Introduction, Up: Top
2 The GNU Build System
**********************
Autoconf solves an important problem--reliable discovery of
system-specific build and runtime information--but this is only one
piece of the puzzle for the development of portable software. To this
end, the GNU project has developed a suite of integrated utilities to
finish the job Autoconf started: the GNU build system, whose most
important components are Autoconf, Automake, and Libtool. In this
chapter, we introduce you to those tools, point you to sources of more
information, and try to convince you to use the entire GNU build system
for your software.
* Menu:
* Automake:: Escaping makefile hell
* Gnulib:: The GNU portability library
* Libtool:: Building libraries portably
* Pointers:: More info on the GNU build system
File: autoconf.info, Node: Automake, Next: Gnulib, Up: The GNU Build System
2.1 Automake
============
The ubiquity of 'make' means that a makefile is almost the only viable
way to distribute automatic build rules for software, but one quickly
runs into its numerous limitations. Its lack of support for automatic
dependency tracking, recursive builds in subdirectories, reliable
timestamps (e.g., for network file systems), and so on, mean that
developers must painfully (and often incorrectly) reinvent the wheel for
each project. Portability is non-trivial, thanks to the quirks of
'make' on many systems. On top of all this is the manual labor required
to implement the many standard targets that users have come to expect
('make install', 'make distclean', 'make uninstall', etc.). Since you
are, of course, using Autoconf, you also have to insert repetitive code
in your 'Makefile.in' to recognize '@CC@', '@CFLAGS@', and other
substitutions provided by 'configure'. Into this mess steps "Automake".
Automake allows you to specify your build needs in a 'Makefile.am'
file with a vastly simpler and more powerful syntax than that of a plain
makefile, and then generates a portable 'Makefile.in' for use with
Autoconf. For example, the 'Makefile.am' to build and install a simple
"Hello world" program might look like:
bin_PROGRAMS = hello
hello_SOURCES = hello.c
The resulting 'Makefile.in' (~400 lines) automatically supports all the
standard targets, the substitutions provided by Autoconf, automatic
dependency tracking, 'VPATH' building, and so on. 'make' builds the
'hello' program, and 'make install' installs it in '/usr/local/bin' (or
whatever prefix was given to 'configure', if not '/usr/local').
The benefits of Automake increase for larger packages (especially
ones with subdirectories), but even for small programs the added
convenience and portability can be substantial. And that's not all...
File: autoconf.info, Node: Gnulib, Next: Libtool, Prev: Automake, Up: The GNU Build System
2.2 Gnulib
==========
GNU software has a well-deserved reputation for running on many
different types of systems. While our primary goal is to write software
for the GNU system, many users and developers have been introduced to us
through the systems that they were already using.
Gnulib is a central location for common GNU code, intended to be
shared among free software packages. Its components are typically
shared at the source level, rather than being a library that gets built,
installed, and linked against. The idea is to copy files from Gnulib
into your own source tree. There is no distribution tarball; developers
should just grab source modules from the repository. The source files
are available online, under various licenses, mostly GNU GPL or GNU
LGPL.
Gnulib modules typically contain C source code along with Autoconf
macros used to configure the source code. For example, the Gnulib
'stdbool' module implements a 'stdbool.h' header that nearly conforms to
C99, even on old-fashioned hosts that lack 'stdbool.h'. This module
contains a source file for the replacement header, along with an
Autoconf macro that arranges to use the replacement header on
old-fashioned systems.
File: autoconf.info, Node: Libtool, Next: Pointers, Prev: Gnulib, Up: The GNU Build System
2.3 Libtool
===========
Often, one wants to build not only programs, but libraries, so that
other programs can benefit from the fruits of your labor. Ideally, one
would like to produce _shared_ (dynamically linked) libraries, which can
be used by multiple programs without duplication on disk or in memory
and can be updated independently of the linked programs. Producing
shared libraries portably, however, is the stuff of nightmares--each
system has its own incompatible tools, compiler flags, and magic
incantations. Fortunately, GNU provides a solution: "Libtool".
Libtool handles all the requirements of building shared libraries for
you, and at this time seems to be the _only_ way to do so with any
portability. It also handles many other headaches, such as: the
interaction of Make rules with the variable suffixes of shared
libraries, linking reliably with shared libraries before they are
installed by the superuser, and supplying a consistent versioning system
(so that different versions of a library can be installed or upgraded
without breaking binary compatibility). Although Libtool, like
Autoconf, can be used without Automake, it is most simply utilized in
conjunction with Automake--there, Libtool is used automatically whenever
shared libraries are needed, and you need not know its syntax.
File: autoconf.info, Node: Pointers, Prev: Libtool, Up: The GNU Build System
2.4 Pointers
============
Developers who are used to the simplicity of 'make' for small projects
on a single system might be daunted at the prospect of learning to use
Automake and Autoconf. As your software is distributed to more and more
users, however, you otherwise quickly find yourself putting lots of
effort into reinventing the services that the GNU build tools provide,
and making the same mistakes that they once made and overcame.
(Besides, since you're already learning Autoconf, Automake is a piece of
cake.)
There are a number of places that you can go to for more information
on the GNU build tools.
- Web
The project home pages for Autoconf
(http://www.gnu.org/software/autoconf/), Automake
(http://www.gnu.org/software/automake/), Gnulib
(http://www.gnu.org/software/gnulib/), and Libtool
(http://www.gnu.org/software/libtool/).
- Automake Manual
*Note Automake: (automake)Top, for more information on Automake.
- Books
The book 'GNU Autoconf, Automake and Libtool'(1) describes the
complete GNU build environment. You can also find the entire book
on-line (http://sources.redhat.com/autobook/).
---------- Footnotes ----------
(1) 'GNU Autoconf, Automake and Libtool', by G. V. Vaughan, B.
Elliston, T. Tromey, and I. L. Taylor. SAMS (originally New Riders),
2000, ISBN 1578701902.
File: autoconf.info, Node: Making configure Scripts, Next: Setup, Prev: The GNU Build System, Up: Top
3 Making 'configure' Scripts
****************************
The configuration scripts that Autoconf produces are by convention
called 'configure'. When run, 'configure' creates several files,
replacing configuration parameters in them with appropriate values. The
files that 'configure' creates are:
- one or more 'Makefile' files, usually one in each subdirectory of
the package (*note Makefile Substitutions::);
- optionally, a C header file, the name of which is configurable,
containing '#define' directives (*note Configuration Headers::);
- a shell script called 'config.status' that, when run, recreates the
files listed above (*note config.status Invocation::);
- an optional shell script normally called 'config.cache' (created
when using 'configure --config-cache') that saves the results of
running many of the tests (*note Cache Files::);
- a file called 'config.log' containing any messages produced by
compilers, to help debugging if 'configure' makes a mistake.
To create a 'configure' script with Autoconf, you need to write an
Autoconf input file 'configure.ac' (or 'configure.in') and run
'autoconf' on it. If you write your own feature tests to supplement
those that come with Autoconf, you might also write files called
'aclocal.m4' and 'acsite.m4'. If you use a C header file to contain
'#define' directives, you might also run 'autoheader', and you can
distribute the generated file 'config.h.in' with the package.
Here is a diagram showing how the files that can be used in
configuration are produced. Programs that are executed are suffixed by
'*'. Optional files are enclosed in square brackets ('[]'). 'autoconf'
and 'autoheader' also read the installed Autoconf macro files (by
reading 'autoconf.m4').
Files used in preparing a software package for distribution, when using
just Autoconf:
your source files --> [autoscan*] --> [configure.scan] --> configure.ac
configure.ac --.
| .------> autoconf* -----> configure
[aclocal.m4] --+---+
| `-----> [autoheader*] --> [config.h.in]
[acsite.m4] ---'
Makefile.in
Additionally, if you use Automake, the following additional productions
come into play:
[acinclude.m4] --.
|
[local macros] --+--> aclocal* --> aclocal.m4
|
configure.ac ----'
configure.ac --.
+--> automake* --> Makefile.in
Makefile.am ---'
Files used in configuring a software package:
.-------------> [config.cache]
configure* ------------+-------------> config.log
|
[config.h.in] -. v .-> [config.h] -.
+--> config.status* -+ +--> make*
Makefile.in ---' `-> Makefile ---'
* Menu:
* Writing Autoconf Input:: What to put in an Autoconf input file
* autoscan Invocation:: Semi-automatic 'configure.ac' writing
* ifnames Invocation:: Listing the conditionals in source code
* autoconf Invocation:: How to create configuration scripts
* autoreconf Invocation:: Remaking multiple 'configure' scripts
File: autoconf.info, Node: Writing Autoconf Input, Next: autoscan Invocation, Up: Making configure Scripts
3.1 Writing 'configure.ac'
==========================
To produce a 'configure' script for a software package, create a file
called 'configure.ac' that contains invocations of the Autoconf macros
that test the system features your package needs or can use. Autoconf
macros already exist to check for many features; see *note Existing
Tests::, for their descriptions. For most other features, you can use
Autoconf template macros to produce custom checks; see *note Writing
Tests::, for information about them. For especially tricky or
specialized features, 'configure.ac' might need to contain some
hand-crafted shell commands; see *note Portable Shell Programming:
Portable Shell. The 'autoscan' program can give you a good start in
writing 'configure.ac' (*note autoscan Invocation::, for more
information).
Previous versions of Autoconf promoted the name 'configure.in', which
is somewhat ambiguous (the tool needed to process this file is not
described by its extension), and introduces a slight confusion with
'config.h.in' and so on (for which '.in' means "to be processed by
'configure'"). Using 'configure.ac' is now preferred.
* Menu:
* Shell Script Compiler:: Autoconf as solution of a problem
* Autoconf Language:: Programming in Autoconf
* Autoconf Input Layout:: Standard organization of 'configure.ac'
File: autoconf.info, Node: Shell Script Compiler, Next: Autoconf Language, Up: Writing Autoconf Input
3.1.1 A Shell Script Compiler
-----------------------------
Just as for any other computer language, in order to properly program
'configure.ac' in Autoconf you must understand _what_ problem the
language tries to address and _how_ it does so.
The problem Autoconf addresses is that the world is a mess. After
all, you are using Autoconf in order to have your package compile easily
on all sorts of different systems, some of them being extremely hostile.
Autoconf itself bears the price for these differences: 'configure' must
run on all those systems, and thus 'configure' must limit itself to
their lowest common denominator of features.
Naturally, you might then think of shell scripts; who needs
'autoconf'? A set of properly written shell functions is enough to make
it easy to write 'configure' scripts by hand. Sigh! Unfortunately,
even in 2008, where shells without any function support are far and few
between, there are pitfalls to avoid when making use of them. Also,
finding a Bourne shell that accepts shell functions is not trivial, even
though there is almost always one on interesting porting targets.
So, what is really needed is some kind of compiler, 'autoconf', that
takes an Autoconf program, 'configure.ac', and transforms it into a
portable shell script, 'configure'.
How does 'autoconf' perform this task?
There are two obvious possibilities: creating a brand new language or
extending an existing one. The former option is attractive: all sorts
of optimizations could easily be implemented in the compiler and many
rigorous checks could be performed on the Autoconf program (e.g.,
rejecting any non-portable construct). Alternatively, you can extend an
existing language, such as the 'sh' (Bourne shell) language.
Autoconf does the latter: it is a layer on top of 'sh'. It was
therefore most convenient to implement 'autoconf' as a macro expander: a
program that repeatedly performs "macro expansions" on text input,
replacing macro calls with macro bodies and producing a pure 'sh' script
in the end. Instead of implementing a dedicated Autoconf macro
expander, it is natural to use an existing general-purpose macro
language, such as M4, and implement the extensions as a set of M4
macros.
File: autoconf.info, Node: Autoconf Language, Next: Autoconf Input Layout, Prev: Shell Script Compiler, Up: Writing Autoconf Input
3.1.2 The Autoconf Language
---------------------------
The Autoconf language differs from many other computer languages because
it treats actual code the same as plain text. Whereas in C, for
instance, data and instructions have different syntactic status, in
Autoconf their status is rigorously the same. Therefore, we need a
means to distinguish literal strings from text to be expanded:
quotation.
When calling macros that take arguments, there must not be any white
space between the macro name and the open parenthesis.
AC_INIT ([oops], [1.0]) # incorrect
AC_INIT([hello], [1.0]) # good
Arguments should be enclosed within the quote characters '[' and ']',
and be separated by commas. Any leading blanks or newlines in arguments
are ignored, unless they are quoted. You should always quote an
argument that might contain a macro name, comma, parenthesis, or a
leading blank or newline. This rule applies recursively for every macro
call, including macros called from other macros. For more details on
quoting rules, see *note Programming in M4::.
For instance:
AC_CHECK_HEADER([stdio.h],
[AC_DEFINE([HAVE_STDIO_H], [1],
[Define to 1 if you have <stdio.h>.])],
[AC_MSG_ERROR([sorry, can't do anything for you])])
is quoted properly. You may safely simplify its quotation to:
AC_CHECK_HEADER([stdio.h],
[AC_DEFINE([HAVE_STDIO_H], 1,
[Define to 1 if you have <stdio.h>.])],
[AC_MSG_ERROR([sorry, can't do anything for you])])
because '1' cannot contain a macro call. Here, the argument of
'AC_MSG_ERROR' must be quoted; otherwise, its comma would be interpreted
as an argument separator. Also, the second and third arguments of
'AC_CHECK_HEADER' must be quoted, since they contain macro calls. The
three arguments 'HAVE_STDIO_H', 'stdio.h', and 'Define to 1 if you have
<stdio.h>.' do not need quoting, but if you unwisely defined a macro
with a name like 'Define' or 'stdio' then they would need quoting.
Cautious Autoconf users would keep the quotes, but many Autoconf users
find such precautions annoying, and would rewrite the example as
follows:
AC_CHECK_HEADER(stdio.h,
[AC_DEFINE(HAVE_STDIO_H, 1,
[Define to 1 if you have <stdio.h>.])],
[AC_MSG_ERROR([sorry, can't do anything for you])])
This is safe, so long as you adopt good naming conventions and do not
define macros with names like 'HAVE_STDIO_H', 'stdio', or 'h'. Though
it is also safe here to omit the quotes around 'Define to 1 if you have
<stdio.h>.' this is not recommended, as message strings are more likely
to inadvertently contain commas.
The following example is wrong and dangerous, as it is underquoted:
AC_CHECK_HEADER(stdio.h,
AC_DEFINE(HAVE_STDIO_H, 1,
Define to 1 if you have <stdio.h>.),
AC_MSG_ERROR([sorry, can't do anything for you]))
In other cases, you may have to use text that also resembles a macro
call. You must quote that text even when it is not passed as a macro
argument. For example, these two approaches in 'configure.ac' (quoting
just the potential problems, or quoting the entire line) will protect
your script in case autoconf ever adds a macro 'AC_DC':
echo "Hard rock was here! --[AC_DC]"
[echo "Hard rock was here! --AC_DC"]
which results in this text in 'configure':
echo "Hard rock was here! --AC_DC"
echo "Hard rock was here! --AC_DC"
When you use the same text in a macro argument, you must therefore have
an extra quotation level (since one is stripped away by the macro
substitution). In general, then, it is a good idea to _use double
quoting for all literal string arguments_, either around just the
problematic portions, or over the entire argument:
AC_MSG_WARN([[AC_DC] stinks --Iron Maiden])
AC_MSG_WARN([[AC_DC stinks --Iron Maiden]])
However, the above example triggers a warning about a possibly
unexpanded macro when running 'autoconf', because it collides with the
namespace of macros reserved for the Autoconf language. To be really
safe, you can use additional escaping (either a quadrigraph, or creative
shell constructs) to silence that particular warning:
echo "Hard rock was here! --AC""_DC"
AC_MSG_WARN([[AC@&t@_DC stinks --Iron Maiden]])
You are now able to understand one of the constructs of Autoconf that
has been continually misunderstood... The rule of thumb is that
_whenever you expect macro expansion, expect quote expansion_; i.e.,
expect one level of quotes to be lost. For instance:
AC_COMPILE_IFELSE(AC_LANG_SOURCE([char b[10];]), [],
[AC_MSG_ERROR([you lose])])
is incorrect: here, the first argument of 'AC_LANG_SOURCE' is 'char
b[10];' and is expanded once, which results in 'char b10;'; and the
'AC_LANG_SOURCE' is also expanded prior to being passed to
'AC_COMPILE_IFELSE'. (There was an idiom common in Autoconf's past to
address this issue via the M4 'changequote' primitive, but do not use
it!) Let's take a closer look: the author meant the first argument to
be understood as a literal, and therefore it must be quoted twice;
likewise, the intermediate 'AC_LANG_SOURCE' macro should be quoted once
so that it is only expanded after the rest of the body of
'AC_COMPILE_IFELSE' is in place:
AC_COMPILE_IFELSE([AC_LANG_SOURCE([[char b[10];]])], [],
[AC_MSG_ERROR([you lose])])
Voilà, you actually produce 'char b[10];' this time!
On the other hand, descriptions (e.g., the last parameter of
'AC_DEFINE' or 'AS_HELP_STRING') are not literals--they are subject to
line breaking, for example--and should not be double quoted. Even if
these descriptions are short and are not actually broken, double quoting
them yields weird results.
Some macros take optional arguments, which this documentation
represents as [ARG] (not to be confused with the quote characters). You
may just leave them empty, or use '[]' to make the emptiness of the
argument explicit, or you may simply omit the trailing commas. The
three lines below are equivalent:
AC_CHECK_HEADERS([stdio.h], [], [], [])
AC_CHECK_HEADERS([stdio.h],,,)
AC_CHECK_HEADERS([stdio.h])
It is best to put each macro call on its own line in 'configure.ac'.
Most of the macros don't add extra newlines; they rely on the newline
after the macro call to terminate the commands. This approach makes the
generated 'configure' script a little easier to read by not inserting
lots of blank lines. It is generally safe to set shell variables on the
same line as a macro call, because the shell allows assignments without
intervening newlines.
You can include comments in 'configure.ac' files by starting them
with the '#'. For example, it is helpful to begin 'configure.ac' files
with a line like this:
# Process this file with autoconf to produce a configure script.
File: autoconf.info, Node: Autoconf Input Layout, Prev: Autoconf Language, Up: Writing Autoconf Input
3.1.3 Standard 'configure.ac' Layout
------------------------------------
The order in which 'configure.ac' calls the Autoconf macros is not
important, with a few exceptions. Every 'configure.ac' must contain a
call to 'AC_INIT' before the checks, and a call to 'AC_OUTPUT' at the
end (*note Output::). Additionally, some macros rely on other macros
having been called first, because they check previously set values of
some variables to decide what to do. These macros are noted in the
individual descriptions (*note Existing Tests::), and they also warn you
when 'configure' is created if they are called out of order.
To encourage consistency, here is a suggested order for calling the
Autoconf macros. Generally speaking, the things near the end of this
list are those that could depend on things earlier in it. For example,
library functions could be affected by types and libraries.
Autoconf requirements
'AC_INIT(PACKAGE, VERSION, BUG-REPORT-ADDRESS)'
information on the package
checks for programs
checks for libraries
checks for header files
checks for types
checks for structures
checks for compiler characteristics
checks for library functions
checks for system services
'AC_CONFIG_FILES([FILE...])'
'AC_OUTPUT'
File: autoconf.info, Node: autoscan Invocation, Next: ifnames Invocation, Prev: Writing Autoconf Input, Up: Making configure Scripts
3.2 Using 'autoscan' to Create 'configure.ac'
=============================================
The 'autoscan' program can help you create and/or maintain a
'configure.ac' file for a software package. 'autoscan' examines source
files in the directory tree rooted at a directory given as a command
line argument, or the current directory if none is given. It searches
the source files for common portability problems and creates a file
'configure.scan' which is a preliminary 'configure.ac' for that package,
and checks a possibly existing 'configure.ac' for completeness.
When using 'autoscan' to create a 'configure.ac', you should manually
examine 'configure.scan' before renaming it to 'configure.ac'; it
probably needs some adjustments. Occasionally, 'autoscan' outputs a
macro in the wrong order relative to another macro, so that 'autoconf'
produces a warning; you need to move such macros manually. Also, if you
want the package to use a configuration header file, you must add a call
to 'AC_CONFIG_HEADERS' (*note Configuration Headers::). You might also
have to change or add some '#if' directives to your program in order to
make it work with Autoconf (*note ifnames Invocation::, for information
about a program that can help with that job).
When using 'autoscan' to maintain a 'configure.ac', simply consider
adding its suggestions. The file 'autoscan.log' contains detailed
information on why a macro is requested.
'autoscan' uses several data files (installed along with Autoconf) to
determine which macros to output when it finds particular symbols in a
package's source files. These data files all have the same format: each
line consists of a symbol, one or more blanks, and the Autoconf macro to
output if that symbol is encountered. Lines starting with '#' are
comments.
'autoscan' accepts the following options:
'--help'
'-h'
Print a summary of the command line options and exit.
'--version'
'-V'
Print the version number of Autoconf and exit.
'--verbose'
'-v'
Print the names of the files it examines and the potentially
interesting symbols it finds in them. This output can be
voluminous.
'--debug'
'-d'
Don't remove temporary files.
'--include=DIR'
'-I DIR'
Append DIR to the include path. Multiple invocations accumulate.
'--prepend-include=DIR'
'-B DIR'
Prepend DIR to the include path. Multiple invocations accumulate.
File: autoconf.info, Node: ifnames Invocation, Next: autoconf Invocation, Prev: autoscan Invocation, Up: Making configure Scripts
3.3 Using 'ifnames' to List Conditionals
========================================
'ifnames' can help you write 'configure.ac' for a software package. It
prints the identifiers that the package already uses in C preprocessor
conditionals. If a package has already been set up to have some
portability, 'ifnames' can thus help you figure out what its 'configure'
needs to check for. It may help fill in some gaps in a 'configure.ac'
generated by 'autoscan' (*note autoscan Invocation::).
'ifnames' scans all of the C source files named on the command line
(or the standard input, if none are given) and writes to the standard
output a sorted list of all the identifiers that appear in those files
in '#if', '#elif', '#ifdef', or '#ifndef' directives. It prints each
identifier on a line, followed by a space-separated list of the files in
which that identifier occurs.
'ifnames' accepts the following options:
'--help'
'-h'
Print a summary of the command line options and exit.
'--version'
'-V'
Print the version number of Autoconf and exit.
File: autoconf.info, Node: autoconf Invocation, Next: autoreconf Invocation, Prev: ifnames Invocation, Up: Making configure Scripts
3.4 Using 'autoconf' to Create 'configure'
==========================================
To create 'configure' from 'configure.ac', run the 'autoconf' program
with no arguments. 'autoconf' processes 'configure.ac' with the M4
macro processor, using the Autoconf macros. If you give 'autoconf' an
argument, it reads that file instead of 'configure.ac' and writes the
configuration script to the standard output instead of to 'configure'.
If you give 'autoconf' the argument '-', it reads from the standard
input instead of 'configure.ac' and writes the configuration script to
the standard output.
The Autoconf macros are defined in several files. Some of the files
are distributed with Autoconf; 'autoconf' reads them first. Then it
looks for the optional file 'acsite.m4' in the directory that contains
the distributed Autoconf macro files, and for the optional file
'aclocal.m4' in the current directory. Those files can contain your
site's or the package's own Autoconf macro definitions (*note Writing
Autoconf Macros::, for more information). If a macro is defined in more
than one of the files that 'autoconf' reads, the last definition it
reads overrides the earlier ones.
'autoconf' accepts the following options:
'--help'
'-h'
Print a summary of the command line options and exit.
'--version'
'-V'
Print the version number of Autoconf and exit.
'--verbose'
'-v'
Report processing steps.
'--debug'
'-d'
Don't remove the temporary files.
'--force'
'-f'
Remake 'configure' even if newer than its input files.
'--include=DIR'
'-I DIR'
Append DIR to the include path. Multiple invocations accumulate.
'--prepend-include=DIR'
'-B DIR'
Prepend DIR to the include path. Multiple invocations accumulate.
'--output=FILE'
'-o FILE'
Save output (script or trace) to FILE. The file '-' stands for the
standard output.
'--warnings=CATEGORY'
'-W CATEGORY'
Report the warnings related to CATEGORY (which can actually be a
comma separated list). *Note Reporting Messages::, macro
'AC_DIAGNOSE', for a comprehensive list of categories. Special
values include:
'all'
report all the warnings
'none'
report none
'error'
treats warnings as errors
'no-CATEGORY'
disable warnings falling into CATEGORY
Warnings about 'syntax' are enabled by default, and the environment
variable 'WARNINGS', a comma separated list of categories, is
honored as well. Passing '-W CATEGORY' actually behaves as if you
had passed '--warnings syntax,$WARNINGS,CATEGORY'. To disable the
defaults and 'WARNINGS', and then enable warnings about obsolete
constructs, use '-W none,obsolete'.
Because 'autoconf' uses 'autom4te' behind the scenes, it displays a
back trace for errors, but not for warnings; if you want them, just
pass '-W error'. *Note autom4te Invocation::, for some examples.
'--trace=MACRO[:FORMAT]'
'-t MACRO[:FORMAT]'
Do not create the 'configure' script, but list the calls to MACRO
according to the FORMAT. Multiple '--trace' arguments can be used
to list several macros. Multiple '--trace' arguments for a single
macro are not cumulative; instead, you should just make FORMAT as
long as needed.
The FORMAT is a regular string, with newlines if desired, and
several special escape codes. It defaults to '$f:$l:$n:$%'; see
*note autom4te Invocation::, for details on the FORMAT.
'--initialization'
'-i'
By default, '--trace' does not trace the initialization of the
Autoconf macros (typically the 'AC_DEFUN' definitions). This
results in a noticeable speedup, but can be disabled by this
option.
It is often necessary to check the content of a 'configure.ac' file,
but parsing it yourself is extremely fragile and error-prone. It is
suggested that you rely upon '--trace' to scan 'configure.ac'. For
instance, to find the list of variables that are substituted, use:
$ autoconf -t AC_SUBST
configure.ac:2:AC_SUBST:ECHO_C
configure.ac:2:AC_SUBST:ECHO_N
configure.ac:2:AC_SUBST:ECHO_T
More traces deleted
The example below highlights the difference between '$@', '$*', and
'$%'.
$ cat configure.ac
AC_DEFINE(This, is, [an
[example]])
$ autoconf -t 'AC_DEFINE:@: $@
*: $*
%: $%'
@: [This],[is],[an
[example]]
*: This,is,an
[example]
%: This:is:an [example]
The FORMAT gives you a lot of freedom:
$ autoconf -t 'AC_SUBST:$$ac_subst{"$1"} = "$f:$l";'
$ac_subst{"ECHO_C"} = "configure.ac:2";
$ac_subst{"ECHO_N"} = "configure.ac:2";
$ac_subst{"ECHO_T"} = "configure.ac:2";
More traces deleted
A long SEPARATOR can be used to improve the readability of complex
structures, and to ease their parsing (for instance when no single
character is suitable as a separator):
$ autoconf -t 'AM_MISSING_PROG:${|:::::|}*'
ACLOCAL|:::::|aclocal|:::::|$missing_dir
AUTOCONF|:::::|autoconf|:::::|$missing_dir
AUTOMAKE|:::::|automake|:::::|$missing_dir
More traces deleted
File: autoconf.info, Node: autoreconf Invocation, Prev: autoconf Invocation, Up: Making configure Scripts
3.5 Using 'autoreconf' to Update 'configure' Scripts
====================================================
Installing the various components of the GNU Build System can be
tedious: running 'autopoint' for Gettext, 'automake' for 'Makefile.in'
etc. in each directory. It may be needed either because some tools such
as 'automake' have been updated on your system, or because some of the
sources such as 'configure.ac' have been updated, or finally, simply in
order to install the GNU Build System in a fresh tree.
'autoreconf' runs 'autoconf', 'autoheader', 'aclocal', 'automake',
'libtoolize', and 'autopoint' (when appropriate) repeatedly to update
the GNU Build System in the specified directories and their
subdirectories (*note Subdirectories::). By default, it only remakes
those files that are older than their sources. The environment
variables 'AUTOM4TE', 'AUTOCONF', 'AUTOHEADER', 'AUTOMAKE', 'ACLOCAL',
'AUTOPOINT', 'LIBTOOLIZE', 'M4', and 'MAKE' may be used to override the
invocation of the respective tools.
If you install a new version of some tool, you can make 'autoreconf'
remake _all_ of the files by giving it the '--force' option.
*Note Automatic Remaking::, for Make rules to automatically rebuild
'configure' scripts when their source files change. That method handles
the timestamps of configuration header templates properly, but does not
pass '--autoconf-dir=DIR' or '--localdir=DIR'.
Gettext supplies the 'autopoint' command to add translation
infrastructure to a source package. If you use 'autopoint', your
'configure.ac' should invoke both 'AM_GNU_GETTEXT' and
'AM_GNU_GETTEXT_VERSION(GETTEXT-VERSION)'. *Note Invoking the
'autopoint' Program: (gettext)autopoint Invocation, for further details.
'autoreconf' accepts the following options:
'--help'
'-h'
Print a summary of the command line options and exit.
'--version'
'-V'
Print the version number of Autoconf and exit.
'--verbose'
'-v'
Print the name of each directory 'autoreconf' examines and the
commands it runs. If given two or more times, pass '--verbose' to
subordinate tools that support it.
'--debug'
'-d'
Don't remove the temporary files.
'--force'
'-f'
Remake even 'configure' scripts and configuration headers that are
newer than their input files ('configure.ac' and, if present,
'aclocal.m4').
'--install'
'-i'
Install the missing auxiliary files in the package. By default,
files are copied; this can be changed with '--symlink'.
If deemed appropriate, this option triggers calls to 'automake
--add-missing', 'libtoolize', 'autopoint', etc.
'--no-recursive'
Do not rebuild files in subdirectories to configure (see *note
Subdirectories::, macro 'AC_CONFIG_SUBDIRS').
'--symlink'
'-s'
When used with '--install', install symbolic links to the missing
auxiliary files instead of copying them.
'--make'
'-m'
When the directories were configured, update the configuration by
running './config.status --recheck && ./config.status', and then
run 'make'.
'--include=DIR'
'-I DIR'
Append DIR to the include path. Multiple invocations accumulate.
Passed on to 'aclocal', 'autoconf' and 'autoheader' internally.
'--prepend-include=DIR'
'-B DIR'
Prepend DIR to the include path. Multiple invocations accumulate.
Passed on to 'autoconf' and 'autoheader' internally.
'--warnings=CATEGORY'
'-W CATEGORY'
Report the warnings related to CATEGORY (which can actually be a
comma separated list).
'cross'
related to cross compilation issues.
'obsolete'
report the uses of obsolete constructs.
'portability'
portability issues
'syntax'
dubious syntactic constructs.
'all'
report all the warnings
'none'
report none
'error'
treats warnings as errors
'no-CATEGORY'
disable warnings falling into CATEGORY
Warnings about 'syntax' are enabled by default, and the environment
variable 'WARNINGS', a comma separated list of categories, is
honored as well. Passing '-W CATEGORY' actually behaves as if you
had passed '--warnings syntax,$WARNINGS,CATEGORY'. To disable the
defaults and 'WARNINGS', and then enable warnings about obsolete
constructs, use '-W none,obsolete'.
If you want 'autoreconf' to pass flags that are not listed here on to
'aclocal', set 'ACLOCAL_AMFLAGS' in your 'Makefile.am'. Due to a
limitation in the Autoconf implementation these flags currently must be
set on a single line in 'Makefile.am', without any backslash-newlines.
File: autoconf.info, Node: Setup, Next: Existing Tests, Prev: Making configure Scripts, Up: Top
4 Initialization and Output Files
*********************************
Autoconf-generated 'configure' scripts need some information about how
to initialize, such as how to find the package's source files and about
the output files to produce. The following sections describe the
initialization and the creation of output files.
* Menu:
* Initializing configure:: Option processing etc.
* Versioning:: Dealing with Autoconf versions
* Notices:: Copyright, version numbers in 'configure'
* Input:: Where Autoconf should find files
* Output:: Outputting results from the configuration
* Configuration Actions:: Preparing the output based on results
* Configuration Files:: Creating output files
* Makefile Substitutions:: Using output variables in makefiles
* Configuration Headers:: Creating a configuration header file
* Configuration Commands:: Running arbitrary instantiation commands
* Configuration Links:: Links depending on the configuration
* Subdirectories:: Configuring independent packages together
* Default Prefix:: Changing the default installation prefix
File: autoconf.info, Node: Initializing configure, Next: Versioning, Up: Setup
4.1 Initializing 'configure'
============================
Every 'configure' script must call 'AC_INIT' before doing anything else
that produces output. Calls to silent macros, such as 'AC_DEFUN', may
also occur prior to 'AC_INIT', although these are generally used via
'aclocal.m4', since that is implicitly included before the start of
'configure.ac'. The only other required macro is 'AC_OUTPUT' (*note
Output::).
-- Macro: AC_INIT (PACKAGE, VERSION, [BUG-REPORT], [TARNAME], [URL])
Process any command-line arguments and perform initialization and
verification.
Set the name of the PACKAGE and its VERSION. These are typically
used in '--version' support, including that of 'configure'. The
optional argument BUG-REPORT should be the email to which users
should send bug reports. The package TARNAME differs from PACKAGE:
the latter designates the full package name (e.g., 'GNU Autoconf'),
while the former is meant for distribution tar ball names (e.g.,
'autoconf'). It defaults to PACKAGE with 'GNU ' stripped,
lower-cased, and all characters other than alphanumerics and
underscores are changed to '-'. If provided, URL should be the
home page for the package.
The arguments of 'AC_INIT' must be static, i.e., there should not
be any shell computation, quotes, or newlines, but they can be
computed by M4. This is because the package information strings
are expanded at M4 time into several contexts, and must give the
same text at shell time whether used in single-quoted strings,
double-quoted strings, quoted here-documents, or unquoted
here-documents. It is permissible to use 'm4_esyscmd' or
'm4_esyscmd_s' for computing a version string that changes with
every commit to a version control system (in fact, Autoconf does
just that, for all builds of the development tree made between
releases).
The following M4 macros (e.g., 'AC_PACKAGE_NAME'), output variables
(e.g., 'PACKAGE_NAME'), and preprocessor symbols (e.g.,
'PACKAGE_NAME'), are defined by 'AC_INIT':
'AC_PACKAGE_NAME', 'PACKAGE_NAME'
Exactly PACKAGE.
'AC_PACKAGE_TARNAME', 'PACKAGE_TARNAME'
Exactly TARNAME, possibly generated from PACKAGE.
'AC_PACKAGE_VERSION', 'PACKAGE_VERSION'
Exactly VERSION.
'AC_PACKAGE_STRING', 'PACKAGE_STRING'
Exactly 'PACKAGE VERSION'.
'AC_PACKAGE_BUGREPORT', 'PACKAGE_BUGREPORT'
Exactly BUG-REPORT, if one was provided. Typically an email
address, or URL to a bug management web page.
'AC_PACKAGE_URL', 'PACKAGE_URL'
Exactly URL, if one was provided. If URL was empty, but
PACKAGE begins with 'GNU ', then this defaults to
'http://www.gnu.org/software/TARNAME/', otherwise, no URL is
assumed.
If your 'configure' script does its own option processing, it should
inspect '$@' or '$*' immediately after calling 'AC_INIT', because other
Autoconf macros liberally use the 'set' command to process strings, and
this has the side effect of updating '$@' and '$*'. However, we suggest
that you use standard macros like 'AC_ARG_ENABLE' instead of attempting
to implement your own option processing. *Note Site Configuration::.
File: autoconf.info, Node: Versioning, Next: Notices, Prev: Initializing configure, Up: Setup
4.2 Dealing with Autoconf versions
==================================
The following optional macros can be used to help choose the minimum
version of Autoconf that can successfully compile a given
'configure.ac'.
-- Macro: AC_PREREQ (VERSION)
Ensure that a recent enough version of Autoconf is being used. If
the version of Autoconf being used to create 'configure' is earlier
than VERSION, print an error message to the standard error output
and exit with failure (exit status is 63). For example:
AC_PREREQ([2.69])
This macro may be used before 'AC_INIT'.
-- Macro: AC_AUTOCONF_VERSION
This macro was introduced in Autoconf 2.62. It identifies the
version of Autoconf that is currently parsing the input file, in a
format suitable for 'm4_version_compare' (*note
m4_version_compare::); in other words, for this release of
Autoconf, its value is '2.69'. One potential use of this macro is
for writing conditional fallbacks based on when a feature was added
to Autoconf, rather than using 'AC_PREREQ' to require the newer
version of Autoconf. However, remember that the Autoconf
philosophy favors feature checks over version checks.
You should not expand this macro directly; use
'm4_defn([AC_AUTOCONF_VERSION])' instead. This is because some
users might have a beta version of Autoconf installed, with
arbitrary letters included in its version string. This means it is
possible for the version string to contain the name of a defined
macro, such that expanding 'AC_AUTOCONF_VERSION' would trigger the
expansion of that macro during rescanning, and change the version
string to be different than what you intended to check.
File: autoconf.info, Node: Notices, Next: Input, Prev: Versioning, Up: Setup
4.3 Notices in 'configure'
==========================
The following macros manage version numbers for 'configure' scripts.
Using them is optional.
-- Macro: AC_COPYRIGHT (COPYRIGHT-NOTICE)
State that, in addition to the Free Software Foundation's copyright
on the Autoconf macros, parts of your 'configure' are covered by
the COPYRIGHT-NOTICE.
The COPYRIGHT-NOTICE shows up in both the head of 'configure' and
in 'configure --version'.
-- Macro: AC_REVISION (REVISION-INFO)
Copy revision stamp REVISION-INFO into the 'configure' script, with
any dollar signs or double-quotes removed. This macro lets you put
a revision stamp from 'configure.ac' into 'configure' without RCS
or CVS changing it when you check in 'configure'. That way, you
can determine easily which revision of 'configure.ac' a particular
'configure' corresponds to.
For example, this line in 'configure.ac':
AC_REVISION([$Revision: 1.30 $])
produces this in 'configure':
#!/bin/sh
# From configure.ac Revision: 1.30
File: autoconf.info, Node: Input, Next: Output, Prev: Notices, Up: Setup
4.4 Finding 'configure' Input
=============================
-- Macro: AC_CONFIG_SRCDIR (UNIQUE-FILE-IN-SOURCE-DIR)
UNIQUE-FILE-IN-SOURCE-DIR is some file that is in the package's
source directory; 'configure' checks for this file's existence to
make sure that the directory that it is told contains the source
code in fact does. Occasionally people accidentally specify the
wrong directory with '--srcdir'; this is a safety check. *Note
configure Invocation::, for more information.
Packages that do manual configuration or use the 'install' program
might need to tell 'configure' where to find some other shell scripts by
calling 'AC_CONFIG_AUX_DIR', though the default places it looks are
correct for most cases.
-- Macro: AC_CONFIG_AUX_DIR (DIR)
Use the auxiliary build tools (e.g., 'install-sh', 'config.sub',
'config.guess', Cygnus 'configure', Automake and Libtool scripts,
etc.) that are in directory DIR. These are auxiliary files used in
configuration. DIR can be either absolute or relative to 'SRCDIR'.
The default is 'SRCDIR' or 'SRCDIR/..' or 'SRCDIR/../..', whichever
is the first that contains 'install-sh'. The other files are not
checked for, so that using 'AC_PROG_INSTALL' does not automatically
require distributing the other auxiliary files. It checks for
'install.sh' also, but that name is obsolete because some 'make'
have a rule that creates 'install' from it if there is no makefile.
The auxiliary directory is commonly named 'build-aux'. If you need
portability to DOS variants, do not name the auxiliary directory
'aux'. *Note File System Conventions::.
-- Macro: AC_REQUIRE_AUX_FILE (FILE)
Declares that FILE is expected in the directory defined above. In
Autoconf proper, this macro does nothing: its sole purpose is to be
traced by third-party tools to produce a list of expected auxiliary
files. For instance it is called by macros like 'AC_PROG_INSTALL'
(*note Particular Programs::) or 'AC_CANONICAL_BUILD' (*note
Canonicalizing::) to register the auxiliary files they need.
Similarly, packages that use 'aclocal' should declare where local
macros can be found using 'AC_CONFIG_MACRO_DIR'.
-- Macro: AC_CONFIG_MACRO_DIR (DIR)
Specify DIR as the location of additional local Autoconf macros.
This macro is intended for use by future versions of commands like
'autoreconf' that trace macro calls. It should be called directly
from 'configure.ac' so that tools that install macros for 'aclocal'
can find the macros' declarations.
Note that if you use 'aclocal' from Automake to generate
'aclocal.m4', you must also set 'ACLOCAL_AMFLAGS = -I DIR' in your
top-level 'Makefile.am'. Due to a limitation in the Autoconf
implementation of 'autoreconf', these include directives currently
must be set on a single line in 'Makefile.am', without any
backslash-newlines.
File: autoconf.info, Node: Output, Next: Configuration Actions, Prev: Input, Up: Setup
4.5 Outputting Files
====================
Every Autoconf script, e.g., 'configure.ac', should finish by calling
'AC_OUTPUT'. That is the macro that generates and runs 'config.status',
which in turn creates the makefiles and any other files resulting from
configuration. This is the only required macro besides 'AC_INIT' (*note
Input::).
-- Macro: AC_OUTPUT
Generate 'config.status' and launch it. Call this macro once, at
the end of 'configure.ac'.
'config.status' performs all the configuration actions: all the
output files (see *note Configuration Files::, macro
'AC_CONFIG_FILES'), header files (see *note Configuration
Headers::, macro 'AC_CONFIG_HEADERS'), commands (see *note
Configuration Commands::, macro 'AC_CONFIG_COMMANDS'), links (see
*note Configuration Links::, macro 'AC_CONFIG_LINKS'),
subdirectories to configure (see *note Subdirectories::, macro
'AC_CONFIG_SUBDIRS') are honored.
The location of your 'AC_OUTPUT' invocation is the exact point
where configuration actions are taken: any code afterwards is
executed by 'configure' once 'config.status' was run. If you want
to bind actions to 'config.status' itself (independently of whether
'configure' is being run), see *note Running Arbitrary
Configuration Commands: Configuration Commands.
Historically, the usage of 'AC_OUTPUT' was somewhat different. *Note
Obsolete Macros::, for a description of the arguments that 'AC_OUTPUT'
used to support.
If you run 'make' in subdirectories, you should run it using the
'make' variable 'MAKE'. Most versions of 'make' set 'MAKE' to the name
of the 'make' program plus any options it was given. (But many do not
include in it the values of any variables set on the command line, so
those are not passed on automatically.) Some old versions of 'make' do
not set this variable. The following macro allows you to use it even
with those versions.
-- Macro: AC_PROG_MAKE_SET
If the Make command, '$MAKE' if set or else 'make', predefines
'$(MAKE)', define output variable 'SET_MAKE' to be empty.
Otherwise, define 'SET_MAKE' to a macro definition that sets
'$(MAKE)', such as 'MAKE=make'. Calls 'AC_SUBST' for 'SET_MAKE'.
If you use this macro, place a line like this in each 'Makefile.in'
that runs 'MAKE' on other directories:
@SET_MAKE@
File: autoconf.info, Node: Configuration Actions, Next: Configuration Files, Prev: Output, Up: Setup
4.6 Performing Configuration Actions
====================================
'configure' is designed so that it appears to do everything itself, but
there is actually a hidden slave: 'config.status'. 'configure' is in
charge of examining your system, but it is 'config.status' that actually
takes the proper actions based on the results of 'configure'. The most
typical task of 'config.status' is to _instantiate_ files.
This section describes the common behavior of the four standard
instantiating macros: 'AC_CONFIG_FILES', 'AC_CONFIG_HEADERS',
'AC_CONFIG_COMMANDS' and 'AC_CONFIG_LINKS'. They all have this
prototype:
AC_CONFIG_ITEMS(TAG..., [COMMANDS], [INIT-CMDS])
where the arguments are:
TAG...
A blank-or-newline-separated list of tags, which are typically the
names of the files to instantiate.
You are encouraged to use literals as TAGS. In particular, you
should avoid
... && my_foos="$my_foos fooo"
... && my_foos="$my_foos foooo"
AC_CONFIG_ITEMS([$my_foos])
and use this instead:
... && AC_CONFIG_ITEMS([fooo])
... && AC_CONFIG_ITEMS([foooo])
The macros 'AC_CONFIG_FILES' and 'AC_CONFIG_HEADERS' use special
TAG values: they may have the form 'OUTPUT' or 'OUTPUT:INPUTS'.
The file OUTPUT is instantiated from its templates, INPUTS
(defaulting to 'OUTPUT.in').
'AC_CONFIG_FILES([Makefile:boiler/top.mk:boiler/bot.mk])', for
example, asks for the creation of the file 'Makefile' that contains
the expansion of the output variables in the concatenation of
'boiler/top.mk' and 'boiler/bot.mk'.
The special value '-' might be used to denote the standard output
when used in OUTPUT, or the standard input when used in the INPUTS.
You most probably don't need to use this in 'configure.ac', but it
is convenient when using the command line interface of
'./config.status', see *note config.status Invocation::, for more
details.
The INPUTS may be absolute or relative file names. In the latter
case they are first looked for in the build tree, and then in the
source tree. Input files should be text files, and a line length
below 2000 bytes should be safe.
COMMANDS
Shell commands output literally into 'config.status', and
associated with a tag that the user can use to tell 'config.status'
which commands to run. The commands are run each time a TAG
request is given to 'config.status', typically each time the file
'TAG' is created.
The variables set during the execution of 'configure' are _not_
available here: you first need to set them via the INIT-CMDS.
Nonetheless the following variables are precomputed:
'srcdir'
The name of the top source directory, assuming that the
working directory is the top build directory. This is what
the 'configure' option '--srcdir' sets.
'ac_top_srcdir'
The name of the top source directory, assuming that the
working directory is the current build directory.
'ac_top_build_prefix'
The name of the top build directory, assuming that the working
directory is the current build directory. It can be empty, or
else ends with a slash, so that you may concatenate it.
'ac_srcdir'
The name of the corresponding source directory, assuming that
the working directory is the current build directory.
'tmp'
The name of a temporary directory within the build tree, which
you can use if you need to create additional temporary files.
The directory is cleaned up when 'config.status' is done or
interrupted. Please use package-specific file name prefixes
to avoid clashing with files that 'config.status' may use
internally.
The "current" directory refers to the directory (or
pseudo-directory) containing the input part of TAGS. For instance,
running
AC_CONFIG_COMMANDS([deep/dir/out:in/in.in], [...], [...])
with '--srcdir=../package' produces the following values:
# Argument of --srcdir
srcdir='../package'
# Reversing deep/dir
ac_top_build_prefix='../../'
# Concatenation of $ac_top_build_prefix and srcdir
ac_top_srcdir='../../../package'
# Concatenation of $ac_top_srcdir and deep/dir
ac_srcdir='../../../package/deep/dir'
independently of 'in/in.in'.
INIT-CMDS
Shell commands output _unquoted_ near the beginning of
'config.status', and executed each time 'config.status' runs
(regardless of the tag). Because they are unquoted, for example,
'$var' is output as the value of 'var'. INIT-CMDS is typically
used by 'configure' to give 'config.status' some variables it needs
to run the COMMANDS.
You should be extremely cautious in your variable names: all the
INIT-CMDS share the same name space and may overwrite each other in
unpredictable ways. Sorry...
All these macros can be called multiple times, with different TAG
values, of course!
File: autoconf.info, Node: Configuration Files, Next: Makefile Substitutions, Prev: Configuration Actions, Up: Setup
4.7 Creating Configuration Files
================================
Be sure to read the previous section, *note Configuration Actions::.
-- Macro: AC_CONFIG_FILES (FILE..., [CMDS], [INIT-CMDS])
Make 'AC_OUTPUT' create each 'FILE' by copying an input file (by
default 'FILE.in'), substituting the output variable values. This
macro is one of the instantiating macros; see *note Configuration
Actions::. *Note Makefile Substitutions::, for more information on
using output variables. *Note Setting Output Variables::, for more
information on creating them. This macro creates the directory
that the file is in if it doesn't exist. Usually, makefiles are
created this way, but other files, such as '.gdbinit', can be
specified as well.
Typical calls to 'AC_CONFIG_FILES' look like this:
AC_CONFIG_FILES([Makefile src/Makefile man/Makefile X/Imakefile])
AC_CONFIG_FILES([autoconf], [chmod +x autoconf])
You can override an input file name by appending to FILE a
colon-separated list of input files. Examples:
AC_CONFIG_FILES([Makefile:boiler/top.mk:boiler/bot.mk]
[lib/Makefile:boiler/lib.mk])
Doing this allows you to keep your file names acceptable to DOS
variants, or to prepend and/or append boilerplate to the file.
File: autoconf.info, Node: Makefile Substitutions, Next: Configuration Headers, Prev: Configuration Files, Up: Setup
4.8 Substitutions in Makefiles
==============================
Each subdirectory in a distribution that contains something to be
compiled or installed should come with a file 'Makefile.in', from which
'configure' creates a file 'Makefile' in that directory. To create
'Makefile', 'configure' performs a simple variable substitution,
replacing occurrences of '@VARIABLE@' in 'Makefile.in' with the value
that 'configure' has determined for that variable. Variables that are
substituted into output files in this way are called "output variables".
They are ordinary shell variables that are set in 'configure'. To make
'configure' substitute a particular variable into the output files, the
macro 'AC_SUBST' must be called with that variable name as an argument.
Any occurrences of '@VARIABLE@' for other variables are left unchanged.
*Note Setting Output Variables::, for more information on creating
output variables with 'AC_SUBST'.
A software package that uses a 'configure' script should be
distributed with a file 'Makefile.in', but no makefile; that way, the
user has to properly configure the package for the local system before
compiling it.
*Note Makefile Conventions: (standards)Makefile Conventions, for more
information on what to put in makefiles.
* Menu:
* Preset Output Variables:: Output variables that are always set
* Installation Directory Variables:: Other preset output variables
* Changed Directory Variables:: Warnings about 'datarootdir'
* Build Directories:: Supporting multiple concurrent compiles
* Automatic Remaking:: Makefile rules for configuring
File: autoconf.info, Node: Preset Output Variables, Next: Installation Directory Variables, Up: Makefile Substitutions
4.8.1 Preset Output Variables
-----------------------------
Some output variables are preset by the Autoconf macros. Some of the
Autoconf macros set additional output variables, which are mentioned in
the descriptions for those macros. *Note Output Variable Index::, for a
complete list of output variables. *Note Installation Directory
Variables::, for the list of the preset ones related to installation
directories. Below are listed the other preset ones, many of which are
precious variables (*note Setting Output Variables::, 'AC_ARG_VAR').
The preset variables which are available during 'config.status'
(*note Configuration Actions::) may also be used during 'configure'
tests. For example, it is permissible to reference '$srcdir' when
constructing a list of directories to pass via option '-I' during a
compiler feature check. When used in this manner, coupled with the fact
that 'configure' is always run from the top build directory, it is
sufficient to use just '$srcdir' instead of '$top_srcdir'.
-- Variable: CFLAGS
Debugging and optimization options for the C compiler. If it is
not set in the environment when 'configure' runs, the default value
is set when you call 'AC_PROG_CC' (or empty if you don't).
'configure' uses this variable when compiling or linking programs
to test for C features.
If a compiler option affects only the behavior of the preprocessor
(e.g., '-DNAME'), it should be put into 'CPPFLAGS' instead. If it
affects only the linker (e.g., '-LDIRECTORY'), it should be put
into 'LDFLAGS' instead. If it affects only the compiler proper,
'CFLAGS' is the natural home for it. If an option affects multiple
phases of the compiler, though, matters get tricky. One approach
to put such options directly into 'CC', e.g., 'CC='gcc -m64''.
Another is to put them into both 'CPPFLAGS' and 'LDFLAGS', but not
into 'CFLAGS'.
However, remember that some 'Makefile' variables are reserved by
the GNU Coding Standards for the use of the "user"--the person
building the package. For instance, 'CFLAGS' is one such variable.
Sometimes package developers are tempted to set user variables such
as 'CFLAGS' because it appears to make their job easier. However,
the package itself should never set a user variable, particularly
not to include switches that are required for proper compilation of
the package. Since these variables are documented as being for the
package builder, that person rightfully expects to be able to
override any of these variables at build time. If the package
developer needs to add switches without interfering with the user,
the proper way to do that is to introduce an additional variable.
Automake makes this easy by introducing 'AM_CFLAGS' (*note
(automake)Flag Variables Ordering::), but the concept is the same
even if Automake is not used.
-- Variable: configure_input
A comment saying that the file was generated automatically by
'configure' and giving the name of the input file. 'AC_OUTPUT'
adds a comment line containing this variable to the top of every
makefile it creates. For other files, you should reference this
variable in a comment at the top of each input file. For example,
an input shell script should begin like this:
#!/bin/sh
# @configure_input@
The presence of that line also reminds people editing the file that
it needs to be processed by 'configure' in order to be used.
-- Variable: CPPFLAGS
Preprocessor options for the C, C++, Objective C, and Objective C++
preprocessors and compilers. If it is not set in the environment
when 'configure' runs, the default value is empty. 'configure'
uses this variable when preprocessing or compiling programs to test
for C, C++, Objective C, and Objective C++ features.
This variable's contents should contain options like '-I', '-D',
and '-U' that affect only the behavior of the preprocessor. Please
see the explanation of 'CFLAGS' for what you can do if an option
affects other phases of the compiler as well.
Currently, 'configure' always links as part of a single invocation
of the compiler that also preprocesses and compiles, so it uses
this variable also when linking programs. However, it is unwise to
depend on this behavior because the GNU Coding Standards do not
require it and many packages do not use 'CPPFLAGS' when linking
programs.
*Note Special Chars in Variables::, for limitations that 'CPPFLAGS'
might run into.
-- Variable: CXXFLAGS
Debugging and optimization options for the C++ compiler. It acts
like 'CFLAGS', but for C++ instead of C.
-- Variable: DEFS
'-D' options to pass to the C compiler. If 'AC_CONFIG_HEADERS' is
called, 'configure' replaces '@DEFS@' with '-DHAVE_CONFIG_H'
instead (*note Configuration Headers::). This variable is not
defined while 'configure' is performing its tests, only when
creating the output files. *Note Setting Output Variables::, for
how to check the results of previous tests.
-- Variable: ECHO_C
-- Variable: ECHO_N
-- Variable: ECHO_T
How does one suppress the trailing newline from 'echo' for
question-answer message pairs? These variables provide a way:
echo $ECHO_N "And the winner is... $ECHO_C"
sleep 100000000000
echo "${ECHO_T}dead."
Some old and uncommon 'echo' implementations offer no means to
achieve this, in which case 'ECHO_T' is set to tab. You might not
want to use it.
-- Variable: ERLCFLAGS
Debugging and optimization options for the Erlang compiler. If it
is not set in the environment when 'configure' runs, the default
value is empty. 'configure' uses this variable when compiling
programs to test for Erlang features.
-- Variable: FCFLAGS
Debugging and optimization options for the Fortran compiler. If it
is not set in the environment when 'configure' runs, the default
value is set when you call 'AC_PROG_FC' (or empty if you don't).
'configure' uses this variable when compiling or linking programs
to test for Fortran features.
-- Variable: FFLAGS
Debugging and optimization options for the Fortran 77 compiler. If
it is not set in the environment when 'configure' runs, the default
value is set when you call 'AC_PROG_F77' (or empty if you don't).
'configure' uses this variable when compiling or linking programs
to test for Fortran 77 features.
-- Variable: LDFLAGS
Options for the linker. If it is not set in the environment when
'configure' runs, the default value is empty. 'configure' uses
this variable when linking programs to test for C, C++, Objective
C, Objective C++, Fortran, and Go features.
This variable's contents should contain options like '-s' and '-L'
that affect only the behavior of the linker. Please see the
explanation of 'CFLAGS' for what you can do if an option also
affects other phases of the compiler.
Don't use this variable to pass library names ('-l') to the linker;
use 'LIBS' instead.
-- Variable: LIBS
'-l' options to pass to the linker. The default value is empty,
but some Autoconf macros may prepend extra libraries to this
variable if those libraries are found and provide necessary
functions, see *note Libraries::. 'configure' uses this variable
when linking programs to test for C, C++, Objective C, Objective
C++, Fortran, and Go features.
-- Variable: OBJCFLAGS
Debugging and optimization options for the Objective C compiler.
It acts like 'CFLAGS', but for Objective C instead of C.
-- Variable: OBJCXXFLAGS
Debugging and optimization options for the Objective C++ compiler.
It acts like 'CXXFLAGS', but for Objective C++ instead of C++.
-- Variable: GOFLAGS
Debugging and optimization options for the Go compiler. It acts
like 'CFLAGS', but for Go instead of C.
-- Variable: builddir
Rigorously equal to '.'. Added for symmetry only.
-- Variable: abs_builddir
Absolute name of 'builddir'.
-- Variable: top_builddir
The relative name of the top level of the current build tree. In
the top-level directory, this is the same as 'builddir'.
-- Variable: top_build_prefix
The relative name of the top level of the current build tree with
final slash if nonempty. This is the same as 'top_builddir',
except that it contains zero or more runs of '../', so it should
not be appended with a slash for concatenation. This helps for
'make' implementations that otherwise do not treat './file' and
'file' as equal in the toplevel build directory.
-- Variable: abs_top_builddir
Absolute name of 'top_builddir'.
-- Variable: srcdir
The name of the directory that contains the source code for that
makefile.
-- Variable: abs_srcdir
Absolute name of 'srcdir'.
-- Variable: top_srcdir
The name of the top-level source code directory for the package.
In the top-level directory, this is the same as 'srcdir'.
-- Variable: abs_top_srcdir
Absolute name of 'top_srcdir'.
File: autoconf.info, Node: Installation Directory Variables, Next: Changed Directory Variables, Prev: Preset Output Variables, Up: Makefile Substitutions
4.8.2 Installation Directory Variables
--------------------------------------
The following variables specify the directories for package
installation, see *note Variables for Installation Directories:
(standards)Directory Variables, for more information. Each variable
corresponds to an argument of 'configure'; trailing slashes are stripped
so that expressions such as '${prefix}/lib' expand with only one slash
between directory names. See the end of this section for details on
when and how to use these variables.
-- Variable: bindir
The directory for installing executables that users run.
-- Variable: datadir
The directory for installing idiosyncratic read-only
architecture-independent data.
-- Variable: datarootdir
The root of the directory tree for read-only
architecture-independent data files.
-- Variable: docdir
The directory for installing documentation files (other than Info
and man).
-- Variable: dvidir
The directory for installing documentation files in DVI format.
-- Variable: exec_prefix
The installation prefix for architecture-dependent files. By
default it's the same as 'prefix'. You should avoid installing
anything directly to 'exec_prefix'. However, the default value for
directories containing architecture-dependent files should be
relative to 'exec_prefix'.
-- Variable: htmldir
The directory for installing HTML documentation.
-- Variable: includedir
The directory for installing C header files.
-- Variable: infodir
The directory for installing documentation in Info format.
-- Variable: libdir
The directory for installing object code libraries.
-- Variable: libexecdir
The directory for installing executables that other programs run.
-- Variable: localedir
The directory for installing locale-dependent but
architecture-independent data, such as message catalogs. This
directory usually has a subdirectory per locale.
-- Variable: localstatedir
The directory for installing modifiable single-machine data.
-- Variable: mandir
The top-level directory for installing documentation in man format.
-- Variable: oldincludedir
The directory for installing C header files for non-GCC compilers.
-- Variable: pdfdir
The directory for installing PDF documentation.
-- Variable: prefix
The common installation prefix for all files. If 'exec_prefix' is
defined to a different value, 'prefix' is used only for
architecture-independent files.
-- Variable: psdir
The directory for installing PostScript documentation.
-- Variable: sbindir
The directory for installing executables that system administrators
run.
-- Variable: sharedstatedir
The directory for installing modifiable architecture-independent
data.
-- Variable: sysconfdir
The directory for installing read-only single-machine data.
Most of these variables have values that rely on 'prefix' or
'exec_prefix'. It is deliberate that the directory output variables
keep them unexpanded: typically '@datarootdir@' is replaced by
'${prefix}/share', not '/usr/local/share', and '@datadir@' is replaced
by '${datarootdir}'.
This behavior is mandated by the GNU Coding Standards, so that when
the user runs:
'make'
she can still specify a different prefix from the one specified to
'configure', in which case, if needed, the package should hard code
dependencies corresponding to the make-specified prefix.
'make install'
she can specify a different installation location, in which case
the package _must_ still depend on the location which was compiled
in (i.e., never recompile when 'make install' is run). This is an
extremely important feature, as many people may decide to install
all the files of a package grouped together, and then install links
from the final locations to there.
In order to support these features, it is essential that
'datarootdir' remains defined as '${prefix}/share', so that its value
can be expanded based on the current value of 'prefix'.
A corollary is that you should not use these variables except in
makefiles. For instance, instead of trying to evaluate 'datadir' in
'configure' and hard-coding it in makefiles using e.g.,
'AC_DEFINE_UNQUOTED([DATADIR], ["$datadir"], [Data directory.])', you
should add '-DDATADIR='$(datadir)'' to your makefile's definition of
'CPPFLAGS' ('AM_CPPFLAGS' if you are also using Automake).
Similarly, you should not rely on 'AC_CONFIG_FILES' to replace
'bindir' and friends in your shell scripts and other files; instead, let
'make' manage their replacement. For instance Autoconf ships templates
of its shell scripts ending with '.in', and uses a makefile snippet
similar to the following to build scripts like 'autoheader' and
'autom4te':
edit = sed \
-e 's|@bindir[@]|$(bindir)|g' \
-e 's|@pkgdatadir[@]|$(pkgdatadir)|g' \
-e 's|@prefix[@]|$(prefix)|g'
autoheader autom4te: Makefile
rm -f $@ $@.tmp
srcdir=''; \
test -f ./$@.in || srcdir=$(srcdir)/; \
$(edit) $${srcdir}$@.in >$@.tmp
chmod +x $@.tmp
chmod a-w $@.tmp
mv $@.tmp $@
autoheader: $(srcdir)/autoheader.in
autom4te: $(srcdir)/autom4te.in
Some details are noteworthy:
'@bindir[@]'
The brackets prevent 'configure' from replacing '@bindir@' in the
Sed expression itself. Brackets are preferable to a backslash
here, since Posix says '\@' is not portable.
'$(bindir)'
Don't use '@bindir@'! Use the matching makefile variable instead.
'$(pkgdatadir)'
The example takes advantage of the variable '$(pkgdatadir)'
provided by Automake; it is equivalent to '$(datadir)/$(PACKAGE)'.
'/'
Don't use '/' in the Sed expressions that replace file names since
most likely the variables you use, such as '$(bindir)', contain
'/'. Use a shell metacharacter instead, such as '|'.
special characters
File names, file name components, and the value of 'VPATH' should
not contain shell metacharacters or white space. *Note Special
Chars in Variables::.
dependency on 'Makefile'
Since 'edit' uses values that depend on the configuration specific
values ('prefix', etc.) and not only on 'VERSION' and so forth, the
output depends on 'Makefile', not 'configure.ac'.
'$@'
The main rule is generic, and uses '$@' extensively to avoid the
need for multiple copies of the rule.
Separated dependencies and single suffix rules
You can't use them! The above snippet cannot be (portably)
rewritten as:
autoconf autoheader: Makefile
.in:
rm -f $@ $@.tmp
$(edit) $< >$@.tmp
chmod +x $@.tmp
mv $@.tmp $@
*Note Single Suffix Rules::, for details.
'$(srcdir)'
Be sure to specify the name of the source directory, otherwise the
package won't support separated builds.
For the more specific installation of Erlang libraries, the following
variables are defined:
-- Variable: ERLANG_INSTALL_LIB_DIR
The common parent directory of Erlang library installation
directories. This variable is set by calling the
'AC_ERLANG_SUBST_INSTALL_LIB_DIR' macro in 'configure.ac'.
-- Variable: ERLANG_INSTALL_LIB_DIR_LIBRARY
The installation directory for Erlang library LIBRARY. This
variable is set by using the 'AC_ERLANG_SUBST_INSTALL_LIB_SUBDIR'
macro in 'configure.ac'.
*Note Erlang Libraries::, for details.
File: autoconf.info, Node: Changed Directory Variables, Next: Build Directories, Prev: Installation Directory Variables, Up: Makefile Substitutions
4.8.3 Changed Directory Variables
---------------------------------
In Autoconf 2.60, the set of directory variables has changed, and the
defaults of some variables have been adjusted (*note Installation
Directory Variables::) to changes in the GNU Coding Standards. Notably,
'datadir', 'infodir', and 'mandir' are now expressed in terms of
'datarootdir'. If you are upgrading from an earlier Autoconf version,
you may need to adjust your files to ensure that the directory variables
are substituted correctly (*note Defining Directories::), and that a
definition of 'datarootdir' is in place. For example, in a
'Makefile.in', adding
datarootdir = @datarootdir@
is usually sufficient. If you use Automake to create 'Makefile.in', it
will add this for you.
To help with the transition, Autoconf warns about files that seem to
use 'datarootdir' without defining it. In some cases, it then expands
the value of '$datarootdir' in substitutions of the directory variables.
The following example shows such a warning:
$ cat configure.ac
AC_INIT
AC_CONFIG_FILES([Makefile])
AC_OUTPUT
$ cat Makefile.in
prefix = @prefix@
datadir = @datadir@
$ autoconf
$ configure
configure: creating ./config.status
config.status: creating Makefile
config.status: WARNING:
Makefile.in seems to ignore the --datarootdir setting
$ cat Makefile
prefix = /usr/local
datadir = ${prefix}/share
Usually one can easily change the file to accommodate both older and
newer Autoconf releases:
$ cat Makefile.in
prefix = @prefix@
datarootdir = @datarootdir@
datadir = @datadir@
$ configure
configure: creating ./config.status
config.status: creating Makefile
$ cat Makefile
prefix = /usr/local
datarootdir = ${prefix}/share
datadir = ${datarootdir}
In some cases, however, the checks may not be able to detect that a
suitable initialization of 'datarootdir' is in place, or they may fail
to detect that such an initialization is necessary in the output file.
If, after auditing your package, there are still spurious 'configure'
warnings about 'datarootdir', you may add the line
AC_DEFUN([AC_DATAROOTDIR_CHECKED])
to your 'configure.ac' to disable the warnings. This is an exception to
the usual rule that you should not define a macro whose name begins with
'AC_' (*note Macro Names::).
File: autoconf.info, Node: Build Directories, Next: Automatic Remaking, Prev: Changed Directory Variables, Up: Makefile Substitutions
4.8.4 Build Directories
-----------------------
You can support compiling a software package for several architectures
simultaneously from the same copy of the source code. The object files
for each architecture are kept in their own directory.
To support doing this, 'make' uses the 'VPATH' variable to find the
files that are in the source directory. GNU Make can do this. Most
other recent 'make' programs can do this as well, though they may have
difficulties and it is often simpler to recommend GNU 'make' (*note
VPATH and Make::). Older 'make' programs do not support 'VPATH'; when
using them, the source code must be in the same directory as the object
files.
If you are using GNU Automake, the remaining details in this section
are already covered for you, based on the contents of your
'Makefile.am'. But if you are using Autoconf in isolation, then
supporting 'VPATH' requires the following in your 'Makefile.in':
srcdir = @srcdir@
VPATH = @srcdir@
Do not set 'VPATH' to the value of another variable (*note Variables
listed in VPATH::.
'configure' substitutes the correct value for 'srcdir' when it
produces 'Makefile'.
Do not use the 'make' variable '$<', which expands to the file name
of the file in the source directory (found with 'VPATH'), except in
implicit rules. (An implicit rule is one such as '.c.o', which tells
how to create a '.o' file from a '.c' file.) Some versions of 'make' do
not set '$<' in explicit rules; they expand it to an empty value.
Instead, Make command lines should always refer to source files by
prefixing them with '$(srcdir)/'. For example:
time.info: time.texinfo
$(MAKEINFO) '$(srcdir)/time.texinfo'
File: autoconf.info, Node: Automatic Remaking, Prev: Build Directories, Up: Makefile Substitutions
4.8.5 Automatic Remaking
------------------------
You can put rules like the following in the top-level 'Makefile.in' for
a package to automatically update the configuration information when you
change the configuration files. This example includes all of the
optional files, such as 'aclocal.m4' and those related to configuration
header files. Omit from the 'Makefile.in' rules for any of these files
that your package does not use.
The '$(srcdir)/' prefix is included because of limitations in the
'VPATH' mechanism.
The 'stamp-' files are necessary because the timestamps of
'config.h.in' and 'config.h' are not changed if remaking them does not
change their contents. This feature avoids unnecessary recompilation.
You should include the file 'stamp-h.in' in your package's distribution,
so that 'make' considers 'config.h.in' up to date. Don't use 'touch'
(*note Limitations of Usual Tools: touch.); instead, use 'echo' (using
'date' would cause needless differences, hence CVS conflicts, etc.).
$(srcdir)/configure: configure.ac aclocal.m4
cd '$(srcdir)' && autoconf
# autoheader might not change config.h.in, so touch a stamp file.
$(srcdir)/config.h.in: stamp-h.in
$(srcdir)/stamp-h.in: configure.ac aclocal.m4
cd '$(srcdir)' && autoheader
echo timestamp > '$(srcdir)/stamp-h.in'
config.h: stamp-h
stamp-h: config.h.in config.status
./config.status
Makefile: Makefile.in config.status
./config.status
config.status: configure
./config.status --recheck
(Be careful if you copy these lines directly into your makefile, as you
need to convert the indented lines to start with the tab character.)
In addition, you should use
AC_CONFIG_FILES([stamp-h], [echo timestamp > stamp-h])
so 'config.status' ensures that 'config.h' is considered up to date.
*Note Output::, for more information about 'AC_OUTPUT'.
*Note config.status Invocation::, for more examples of handling
configuration-related dependencies.
File: autoconf.info, Node: Configuration Headers, Next: Configuration Commands, Prev: Makefile Substitutions, Up: Setup
4.9 Configuration Header Files
==============================
When a package contains more than a few tests that define C preprocessor
symbols, the command lines to pass '-D' options to the compiler can get
quite long. This causes two problems. One is that the 'make' output is
hard to visually scan for errors. More seriously, the command lines can
exceed the length limits of some operating systems. As an alternative
to passing '-D' options to the compiler, 'configure' scripts can create
a C header file containing '#define' directives. The
'AC_CONFIG_HEADERS' macro selects this kind of output. Though it can be
called anywhere between 'AC_INIT' and 'AC_OUTPUT', it is customary to
call it right after 'AC_INIT'.
The package should '#include' the configuration header file before
any other header files, to prevent inconsistencies in declarations (for
example, if it redefines 'const').
To provide for VPATH builds, remember to pass the C compiler a '-I.'
option (or '-I..'; whichever directory contains 'config.h'). Even if
you use '#include "config.h"', the preprocessor searches only the
directory of the currently read file, i.e., the source directory, not
the build directory.
With the appropriate '-I' option, you can use '#include <config.h>'.
Actually, it's a good habit to use it, because in the rare case when the
source directory contains another 'config.h', the build directory should
be searched first.
-- Macro: AC_CONFIG_HEADERS (HEADER ..., [CMDS], [INIT-CMDS])
This macro is one of the instantiating macros; see *note
Configuration Actions::. Make 'AC_OUTPUT' create the file(s) in
the blank-or-newline-separated list HEADER containing C
preprocessor '#define' statements, and replace '@DEFS@' in
generated files with '-DHAVE_CONFIG_H' instead of the value of
'DEFS'. The usual name for HEADER is 'config.h'.
If HEADER already exists and its contents are identical to what
'AC_OUTPUT' would put in it, it is left alone. Doing this allows
making some changes in the configuration without needlessly causing
object files that depend on the header file to be recompiled.
Usually the input file is named 'HEADER.in'; however, you can
override the input file name by appending to HEADER a
colon-separated list of input files. For example, you might need
to make the input file name acceptable to DOS variants:
AC_CONFIG_HEADERS([config.h:config.hin])
-- Macro: AH_HEADER
This macro is defined as the name of the first declared config
header and undefined if no config headers have been declared up to
this point. A third-party macro may, for example, require use of a
config header without invoking AC_CONFIG_HEADERS twice, like this:
AC_CONFIG_COMMANDS_PRE(
[m4_ifndef([AH_HEADER], [AC_CONFIG_HEADERS([config.h])])])
*Note Configuration Actions::, for more details on HEADER.
* Menu:
* Header Templates:: Input for the configuration headers
* autoheader Invocation:: How to create configuration templates
* Autoheader Macros:: How to specify CPP templates
File: autoconf.info, Node: Header Templates, Next: autoheader Invocation, Up: Configuration Headers
4.9.1 Configuration Header Templates
------------------------------------
Your distribution should contain a template file that looks as you want
the final header file to look, including comments, with '#undef'
statements which are used as hooks. For example, suppose your
'configure.ac' makes these calls:
AC_CONFIG_HEADERS([conf.h])
AC_CHECK_HEADERS([unistd.h])
Then you could have code like the following in 'conf.h.in'. The
'conf.h' created by 'configure' defines 'HAVE_UNISTD_H' to 1, if and
only if the system has 'unistd.h'.
/* Define as 1 if you have unistd.h. */
#undef HAVE_UNISTD_H
The format of the template file is stricter than what the C
preprocessor is required to accept. A directive line should contain
only whitespace, '#undef', and 'HAVE_UNISTD_H'. The use of '#define'
instead of '#undef', or of comments on the same line as '#undef', is
strongly discouraged. Each hook should only be listed once. Other
preprocessor lines, such as '#ifdef' or '#include', are copied verbatim
from the template into the generated header.
Since it is a tedious task to keep a template header up to date, you
may use 'autoheader' to generate it, see *note autoheader Invocation::.
During the instantiation of the header, each '#undef' line in the
template file for each symbol defined by 'AC_DEFINE' is changed to an
appropriate '#define'. If the corresponding 'AC_DEFINE' has not been
executed during the 'configure' run, the '#undef' line is commented out.
(This is important, e.g., for '_POSIX_SOURCE': on many systems, it can
be implicitly defined by the compiler, and undefining it in the header
would then break compilation of subsequent headers.)
Currently, _all_ remaining '#undef' lines in the header template are
commented out, whether or not there was a corresponding 'AC_DEFINE' for
the macro name; but this behavior is not guaranteed for future releases
of Autoconf.
Generally speaking, since you should not use '#define', and you
cannot guarantee whether a '#undef' directive in the header template
will be converted to a '#define' or commented out in the generated
header file, the template file cannot be used for conditional definition
effects. Consequently, if you need to use the construct
#ifdef THIS
# define THAT
#endif
you must place it outside of the template. If you absolutely need to
hook it to the config header itself, please put the directives to a
separate file, and '#include' that file from the config header template.
If you are using 'autoheader', you would probably use 'AH_BOTTOM' to
append the '#include' directive.
File: autoconf.info, Node: autoheader Invocation, Next: Autoheader Macros, Prev: Header Templates, Up: Configuration Headers
4.9.2 Using 'autoheader' to Create 'config.h.in'
------------------------------------------------
The 'autoheader' program can create a template file of C '#define'
statements for 'configure' to use. It searches for the first invocation
of 'AC_CONFIG_HEADERS' in 'configure' sources to determine the name of
the template. (If the first call of 'AC_CONFIG_HEADERS' specifies more
than one input file name, 'autoheader' uses the first one.)
It is recommended that only one input file is used. If you want to
append a boilerplate code, it is preferable to use 'AH_BOTTOM([#include
<conf_post.h>])'. File 'conf_post.h' is not processed during the
configuration then, which make things clearer. Analogically, 'AH_TOP'
can be used to prepend a boilerplate code.
In order to do its job, 'autoheader' needs you to document all of the
symbols that you might use. Typically this is done via an 'AC_DEFINE'
or 'AC_DEFINE_UNQUOTED' call whose first argument is a literal symbol
and whose third argument describes the symbol (*note Defining
Symbols::). Alternatively, you can use 'AH_TEMPLATE' (*note Autoheader
Macros::), or you can supply a suitable input file for a subsequent
configuration header file. Symbols defined by Autoconf's builtin tests
are already documented properly; you need to document only those that
you define yourself.
You might wonder why 'autoheader' is needed: after all, why would
'configure' need to "patch" a 'config.h.in' to produce a 'config.h'
instead of just creating 'config.h' from scratch? Well, when everything
rocks, the answer is just that we are wasting our time maintaining
'autoheader': generating 'config.h' directly is all that is needed.
When things go wrong, however, you'll be thankful for the existence of
'autoheader'.
The fact that the symbols are documented is important in order to
_check_ that 'config.h' makes sense. The fact that there is a
well-defined list of symbols that should be defined (or not) is also
important for people who are porting packages to environments where
'configure' cannot be run: they just have to _fill in the blanks_.
But let's come back to the point: the invocation of 'autoheader'...
If you give 'autoheader' an argument, it uses that file instead of
'configure.ac' and writes the header file to the standard output instead
of to 'config.h.in'. If you give 'autoheader' an argument of '-', it
reads the standard input instead of 'configure.ac' and writes the header
file to the standard output.
'autoheader' accepts the following options:
'--help'
'-h'
Print a summary of the command line options and exit.
'--version'
'-V'
Print the version number of Autoconf and exit.
'--verbose'
'-v'
Report processing steps.
'--debug'
'-d'
Don't remove the temporary files.
'--force'
'-f'
Remake the template file even if newer than its input files.
'--include=DIR'
'-I DIR'
Append DIR to the include path. Multiple invocations accumulate.
'--prepend-include=DIR'
'-B DIR'
Prepend DIR to the include path. Multiple invocations accumulate.
'--warnings=CATEGORY'
'-W CATEGORY'
Report the warnings related to CATEGORY (which can actually be a
comma separated list). Current categories include:
'obsolete'
report the uses of obsolete constructs
'all'
report all the warnings
'none'
report none
'error'
treats warnings as errors
'no-CATEGORY'
disable warnings falling into CATEGORY
File: autoconf.info, Node: Autoheader Macros, Prev: autoheader Invocation, Up: Configuration Headers
4.9.3 Autoheader Macros
-----------------------
'autoheader' scans 'configure.ac' and figures out which C preprocessor
symbols it might define. It knows how to generate templates for symbols
defined by 'AC_CHECK_HEADERS', 'AC_CHECK_FUNCS' etc., but if you
'AC_DEFINE' any additional symbol, you must define a template for it.
If there are missing templates, 'autoheader' fails with an error
message.
The template for a SYMBOL is created by 'autoheader' from the
DESCRIPTION argument to an 'AC_DEFINE'; see *note Defining Symbols::.
For special needs, you can use the following macros.
-- Macro: AH_TEMPLATE (KEY, DESCRIPTION)
Tell 'autoheader' to generate a template for KEY. This macro
generates standard templates just like 'AC_DEFINE' when a
DESCRIPTION is given.
For example:
AH_TEMPLATE([CRAY_STACKSEG_END],
[Define to one of _getb67, GETB67, getb67
for Cray-2 and Cray-YMP systems. This
function is required for alloca.c support
on those systems.])
generates the following template, with the description properly
justified.
/* Define to one of _getb67, GETB67, getb67 for Cray-2 and
Cray-YMP systems. This function is required for alloca.c
support on those systems. */
#undef CRAY_STACKSEG_END
-- Macro: AH_VERBATIM (KEY, TEMPLATE)
Tell 'autoheader' to include the TEMPLATE as-is in the header
template file. This TEMPLATE is associated with the KEY, which is
used to sort all the different templates and guarantee their
uniqueness. It should be a symbol that can be defined via
'AC_DEFINE'.
-- Macro: AH_TOP (TEXT)
Include TEXT at the top of the header template file.
-- Macro: AH_BOTTOM (TEXT)
Include TEXT at the bottom of the header template file.
Please note that TEXT gets included "verbatim" to the template file,
not to the resulting config header, so it can easily get mangled when
the template is processed. There is rarely a need for something other
than
AH_BOTTOM([#include <custom.h>])
File: autoconf.info, Node: Configuration Commands, Next: Configuration Links, Prev: Configuration Headers, Up: Setup
4.10 Running Arbitrary Configuration Commands
=============================================
You can execute arbitrary commands before, during, and after
'config.status' is run. The three following macros accumulate the
commands to run when they are called multiple times.
'AC_CONFIG_COMMANDS' replaces the obsolete macro 'AC_OUTPUT_COMMANDS';
see *note Obsolete Macros::, for details.
-- Macro: AC_CONFIG_COMMANDS (TAG..., [CMDS], [INIT-CMDS])
Specify additional shell commands to run at the end of
'config.status', and shell commands to initialize any variables
from 'configure'. Associate the commands with TAG. Since
typically the CMDS create a file, TAG should naturally be the name
of that file. If needed, the directory hosting TAG is created.
This macro is one of the instantiating macros; see *note
Configuration Actions::.
Here is an unrealistic example:
fubar=42
AC_CONFIG_COMMANDS([fubar],
[echo this is extra $fubar, and so on.],
[fubar=$fubar])
Here is a better one:
AC_CONFIG_COMMANDS([timestamp], [date >timestamp])
The following two macros look similar, but in fact they are not of
the same breed: they are executed directly by 'configure', so you cannot
use 'config.status' to rerun them.
-- Macro: AC_CONFIG_COMMANDS_PRE (CMDS)
Execute the CMDS right before creating 'config.status'.
This macro presents the last opportunity to call 'AC_SUBST',
'AC_DEFINE', or 'AC_CONFIG_ITEMS' macros.
-- Macro: AC_CONFIG_COMMANDS_POST (CMDS)
Execute the CMDS right after creating 'config.status'.
File: autoconf.info, Node: Configuration Links, Next: Subdirectories, Prev: Configuration Commands, Up: Setup
4.11 Creating Configuration Links
=================================
You may find it convenient to create links whose destinations depend
upon results of tests. One can use 'AC_CONFIG_COMMANDS' but the
creation of relative symbolic links can be delicate when the package is
built in a directory different from the source directory.
-- Macro: AC_CONFIG_LINKS (DEST:SOURCE..., [CMDS], [INIT-CMDS])
Make 'AC_OUTPUT' link each of the existing files SOURCE to the
corresponding link name DEST. Makes a symbolic link if possible,
otherwise a hard link if possible, otherwise a copy. The DEST and
SOURCE names should be relative to the top level source or build
directory. This macro is one of the instantiating macros; see
*note Configuration Actions::.
For example, this call:
AC_CONFIG_LINKS([host.h:config/$machine.h
object.h:config/$obj_format.h])
creates in the current directory 'host.h' as a link to
'SRCDIR/config/$machine.h', and 'object.h' as a link to
'SRCDIR/config/$obj_format.h'.
The tempting value '.' for DEST is invalid: it makes it impossible
for 'config.status' to guess the links to establish.
One can then run:
./config.status host.h object.h
to create the links.
File: autoconf.info, Node: Subdirectories, Next: Default Prefix, Prev: Configuration Links, Up: Setup
4.12 Configuring Other Packages in Subdirectories
=================================================
In most situations, calling 'AC_OUTPUT' is sufficient to produce
makefiles in subdirectories. However, 'configure' scripts that control
more than one independent package can use 'AC_CONFIG_SUBDIRS' to run
'configure' scripts for other packages in subdirectories.
-- Macro: AC_CONFIG_SUBDIRS (DIR ...)
Make 'AC_OUTPUT' run 'configure' in each subdirectory DIR in the
given blank-or-newline-separated list. Each DIR should be a
literal, i.e., please do not use:
if test "x$package_foo_enabled" = xyes; then
my_subdirs="$my_subdirs foo"
fi
AC_CONFIG_SUBDIRS([$my_subdirs])
because this prevents './configure --help=recursive' from
displaying the options of the package 'foo'. Instead, you should
write:
if test "x$package_foo_enabled" = xyes; then
AC_CONFIG_SUBDIRS([foo])
fi
If a given DIR is not found at 'configure' run time, a warning is
reported; if the subdirectory is optional, write:
if test -d "$srcdir/foo"; then
AC_CONFIG_SUBDIRS([foo])
fi
If a given DIR contains 'configure.gnu', it is run instead of
'configure'. This is for packages that might use a non-Autoconf
script 'Configure', which can't be called through a wrapper
'configure' since it would be the same file on case-insensitive
file systems. Likewise, if a DIR contains 'configure.in' but no
'configure', the Cygnus 'configure' script found by
'AC_CONFIG_AUX_DIR' is used.
The subdirectory 'configure' scripts are given the same command
line options that were given to this 'configure' script, with minor
changes if needed, which include:
- adjusting a relative name for the cache file;
- adjusting a relative name for the source directory;
- propagating the current value of '$prefix', including if it
was defaulted, and if the default values of the top level and
of the subdirectory 'configure' differ.
This macro also sets the output variable 'subdirs' to the list of
directories 'DIR ...'. Make rules can use this variable to
determine which subdirectories to recurse into.
This macro may be called multiple times.
File: autoconf.info, Node: Default Prefix, Prev: Subdirectories, Up: Setup
4.13 Default Prefix
===================
By default, 'configure' sets the prefix for files it installs to
'/usr/local'. The user of 'configure' can select a different prefix
using the '--prefix' and '--exec-prefix' options. There are two ways to
change the default: when creating 'configure', and when running it.
Some software packages might want to install in a directory other
than '/usr/local' by default. To accomplish that, use the
'AC_PREFIX_DEFAULT' macro.
-- Macro: AC_PREFIX_DEFAULT (PREFIX)
Set the default installation prefix to PREFIX instead of
'/usr/local'.
It may be convenient for users to have 'configure' guess the
installation prefix from the location of a related program that they
have already installed. If you wish to do that, you can call
'AC_PREFIX_PROGRAM'.
-- Macro: AC_PREFIX_PROGRAM (PROGRAM)
If the user did not specify an installation prefix (using the
'--prefix' option), guess a value for it by looking for PROGRAM in
'PATH', the way the shell does. If PROGRAM is found, set the
prefix to the parent of the directory containing PROGRAM, else
default the prefix as described above ('/usr/local' or
'AC_PREFIX_DEFAULT'). For example, if PROGRAM is 'gcc' and the
'PATH' contains '/usr/local/gnu/bin/gcc', set the prefix to
'/usr/local/gnu'.
File: autoconf.info, Node: Existing Tests, Next: Writing Tests, Prev: Setup, Up: Top
5 Existing Tests
****************
These macros test for particular system features that packages might
need or want to use. If you need to test for a kind of feature that
none of these macros check for, you can probably do it by calling
primitive test macros with appropriate arguments (*note Writing
Tests::).
These tests print messages telling the user which feature they're
checking for, and what they find. They cache their results for future
'configure' runs (*note Caching Results::).
Some of these macros set output variables. *Note Makefile
Substitutions::, for how to get their values. The phrase "define NAME"
is used below as a shorthand to mean "define the C preprocessor symbol
NAME to the value 1". *Note Defining Symbols::, for how to get those
symbol definitions into your program.
* Menu:
* Common Behavior:: Macros' standard schemes
* Alternative Programs:: Selecting between alternative programs
* Files:: Checking for the existence of files
* Libraries:: Library archives that might be missing
* Library Functions:: C library functions that might be missing
* Header Files:: Header files that might be missing
* Declarations:: Declarations that may be missing
* Structures:: Structures or members that might be missing
* Types:: Types that might be missing
* Compilers and Preprocessors:: Checking for compiling programs
* System Services:: Operating system services
* Posix Variants:: Special kludges for specific Posix variants
* Erlang Libraries:: Checking for the existence of Erlang libraries
File: autoconf.info, Node: Common Behavior, Next: Alternative Programs, Up: Existing Tests
5.1 Common Behavior
===================
Much effort has been expended to make Autoconf easy to learn. The most
obvious way to reach this goal is simply to enforce standard interfaces
and behaviors, avoiding exceptions as much as possible. Because of
history and inertia, unfortunately, there are still too many exceptions
in Autoconf; nevertheless, this section describes some of the common
rules.
* Menu:
* Standard Symbols:: Symbols defined by the macros
* Default Includes:: Includes used by the generic macros
File: autoconf.info, Node: Standard Symbols, Next: Default Includes, Up: Common Behavior
5.1.1 Standard Symbols
----------------------
All the generic macros that 'AC_DEFINE' a symbol as a result of their
test transform their ARGUMENT values to a standard alphabet. First,
ARGUMENT is converted to upper case and any asterisks ('*') are each
converted to 'P'. Any remaining characters that are not alphanumeric
are converted to underscores.
For instance,
AC_CHECK_TYPES([struct $Expensive*])
defines the symbol 'HAVE_STRUCT__EXPENSIVEP' if the check succeeds.
File: autoconf.info, Node: Default Includes, Prev: Standard Symbols, Up: Common Behavior
5.1.2 Default Includes
----------------------
Several tests depend upon a set of header files. Since these headers
are not universally available, tests actually have to provide a set of
protected includes, such as:
#ifdef TIME_WITH_SYS_TIME
# include <sys/time.h>
# include <time.h>
#else
# ifdef HAVE_SYS_TIME_H
# include <sys/time.h>
# else
# include <time.h>
# endif
#endif
Unless you know exactly what you are doing, you should avoid using
unconditional includes, and check the existence of the headers you
include beforehand (*note Header Files::).
Most generic macros use the following macro to provide the default
set of includes:
-- Macro: AC_INCLUDES_DEFAULT ([INCLUDE-DIRECTIVES])
Expand to INCLUDE-DIRECTIVES if defined, otherwise to:
#include <stdio.h>
#ifdef HAVE_SYS_TYPES_H
# include <sys/types.h>
#endif
#ifdef HAVE_SYS_STAT_H
# include <sys/stat.h>
#endif
#ifdef STDC_HEADERS
# include <stdlib.h>
# include <stddef.h>
#else
# ifdef HAVE_STDLIB_H
# include <stdlib.h>
# endif
#endif
#ifdef HAVE_STRING_H
# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
# include <memory.h>
# endif
# include <string.h>
#endif
#ifdef HAVE_STRINGS_H
# include <strings.h>
#endif
#ifdef HAVE_INTTYPES_H
# include <inttypes.h>
#endif
#ifdef HAVE_STDINT_H
# include <stdint.h>
#endif
#ifdef HAVE_UNISTD_H
# include <unistd.h>
#endif
If the default includes are used, then check for the presence of
these headers and their compatibility, i.e., you don't need to run
'AC_HEADER_STDC', nor check for 'stdlib.h' etc.
These headers are checked for in the same order as they are
included. For instance, on some systems 'string.h' and 'strings.h'
both exist, but conflict. Then 'HAVE_STRING_H' is defined, not
'HAVE_STRINGS_H'.
File: autoconf.info, Node: Alternative Programs, Next: Files, Prev: Common Behavior, Up: Existing Tests
5.2 Alternative Programs
========================
These macros check for the presence or behavior of particular programs.
They are used to choose between several alternative programs and to
decide what to do once one has been chosen. If there is no macro
specifically defined to check for a program you need, and you don't need
to check for any special properties of it, then you can use one of the
general program-check macros.
* Menu:
* Particular Programs:: Special handling to find certain programs
* Generic Programs:: How to find other programs
File: autoconf.info, Node: Particular Programs, Next: Generic Programs, Up: Alternative Programs
5.2.1 Particular Program Checks
-------------------------------
These macros check for particular programs--whether they exist, and in
some cases whether they support certain features.
-- Macro: AC_PROG_AWK
Check for 'gawk', 'mawk', 'nawk', and 'awk', in that order, and set
output variable 'AWK' to the first one that is found. It tries
'gawk' first because that is reported to be the best
implementation. The result can be overridden by setting the
variable 'AWK' or the cache variable 'ac_cv_prog_AWK'.
Using this macro is sufficient to avoid the pitfalls of traditional
'awk' (*note Limitations of Usual Tools: awk.).
-- Macro: AC_PROG_GREP
Look for the best available 'grep' or 'ggrep' that accepts the
longest input lines possible, and that supports multiple '-e'
options. Set the output variable 'GREP' to whatever is chosen.
*Note Limitations of Usual Tools: grep, for more information about
portability problems with the 'grep' command family. The result
can be overridden by setting the 'GREP' variable and is cached in
the 'ac_cv_path_GREP' variable.
-- Macro: AC_PROG_EGREP
Check whether '$GREP -E' works, or else look for the best available
'egrep' or 'gegrep' that accepts the longest input lines possible.
Set the output variable 'EGREP' to whatever is chosen. The result
can be overridden by setting the 'EGREP' variable and is cached in
the 'ac_cv_path_EGREP' variable.
-- Macro: AC_PROG_FGREP
Check whether '$GREP -F' works, or else look for the best available
'fgrep' or 'gfgrep' that accepts the longest input lines possible.
Set the output variable 'FGREP' to whatever is chosen. The result
can be overridden by setting the 'FGREP' variable and is cached in
the 'ac_cv_path_FGREP' variable.
-- Macro: AC_PROG_INSTALL
Set output variable 'INSTALL' to the name of a BSD-compatible
'install' program, if one is found in the current 'PATH'.
Otherwise, set 'INSTALL' to 'DIR/install-sh -c', checking the
directories specified to 'AC_CONFIG_AUX_DIR' (or its default
directories) to determine DIR (*note Output::). Also set the
variables 'INSTALL_PROGRAM' and 'INSTALL_SCRIPT' to '${INSTALL}'
and 'INSTALL_DATA' to '${INSTALL} -m 644'.
'@INSTALL@' is special, as its value may vary for different
configuration files.
This macro screens out various instances of 'install' known not to
work. It prefers to find a C program rather than a shell script,
for speed. Instead of 'install-sh', it can also use 'install.sh',
but that name is obsolete because some 'make' programs have a rule
that creates 'install' from it if there is no makefile. Further,
this macro requires 'install' to be able to install multiple files
into a target directory in a single invocation.
Autoconf comes with a copy of 'install-sh' that you can use. If
you use 'AC_PROG_INSTALL', you must include either 'install-sh' or
'install.sh' in your distribution; otherwise 'configure' produces
an error message saying it can't find them--even if the system
you're on has a good 'install' program. This check is a safety
measure to prevent you from accidentally leaving that file out,
which would prevent your package from installing on systems that
don't have a BSD-compatible 'install' program.
If you need to use your own installation program because it has
features not found in standard 'install' programs, there is no
reason to use 'AC_PROG_INSTALL'; just put the file name of your
program into your 'Makefile.in' files.
The result of the test can be overridden by setting the variable
'INSTALL' or the cache variable 'ac_cv_path_install'.
-- Macro: AC_PROG_MKDIR_P
Set output variable 'MKDIR_P' to a program that ensures that for
each argument, a directory named by this argument exists, creating
it and its parent directories if needed, and without race
conditions when two instances of the program attempt to make the
same directory at nearly the same time.
This macro uses the 'mkdir -p' command if possible. Otherwise, it
falls back on invoking 'install-sh' with the '-d' option, so your
package should contain 'install-sh' as described under
'AC_PROG_INSTALL'. An 'install-sh' file that predates Autoconf
2.60 or Automake 1.10 is vulnerable to race conditions, so if you
want to support parallel installs from different packages into the
same directory you need to make sure you have an up-to-date
'install-sh'. In particular, be careful about using 'autoreconf
-if' if your Automake predates Automake 1.10.
This macro is related to the 'AS_MKDIR_P' macro (*note Programming
in M4sh::), but it sets an output variable intended for use in
other files, whereas 'AS_MKDIR_P' is intended for use in scripts
like 'configure'. Also, 'AS_MKDIR_P' does not accept options, but
'MKDIR_P' supports the '-m' option, e.g., a makefile might invoke
'$(MKDIR_P) -m 0 dir' to create an inaccessible directory, and
conversely a makefile should use '$(MKDIR_P) -- $(FOO)' if FOO
might yield a value that begins with '-'. Finally, 'AS_MKDIR_P'
does not check for race condition vulnerability, whereas
'AC_PROG_MKDIR_P' does.
'@MKDIR_P@' is special, as its value may vary for different
configuration files.
The result of the test can be overridden by setting the variable
'MKDIR_P' or the cache variable 'ac_cv_path_mkdir'.
-- Macro: AC_PROG_LEX
If 'flex' is found, set output variable 'LEX' to 'flex' and
'LEXLIB' to '-lfl', if that library is in a standard place.
Otherwise set 'LEX' to 'lex' and 'LEXLIB' to '-ll', if found. If
neither variant is available, set 'LEX' to ':'; for packages that
ship the generated 'file.yy.c' alongside the source 'file.l', this
default allows users without a lexer generator to still build the
package even if the timestamp for 'file.l' is inadvertently
changed.
Define 'YYTEXT_POINTER' if 'yytext' defaults to 'char *' instead of
to 'char []'. Also set output variable 'LEX_OUTPUT_ROOT' to the
base of the file name that the lexer generates; usually 'lex.yy',
but sometimes something else. These results vary according to
whether 'lex' or 'flex' is being used.
You are encouraged to use Flex in your sources, since it is both
more pleasant to use than plain Lex and the C source it produces is
portable. In order to ensure portability, however, you must either
provide a function 'yywrap' or, if you don't use it (e.g., your
scanner has no '#include'-like feature), simply include a
'%noyywrap' statement in the scanner's source. Once this done, the
scanner is portable (unless _you_ felt free to use nonportable
constructs) and does not depend on any library. In this case, and
in this case only, it is suggested that you use this Autoconf
snippet:
AC_PROG_LEX
if test "x$LEX" != xflex; then
LEX="$SHELL $missing_dir/missing flex"
AC_SUBST([LEX_OUTPUT_ROOT], [lex.yy])
AC_SUBST([LEXLIB], [''])
fi
The shell script 'missing' can be found in the Automake
distribution.
Remember that the user may have supplied an alternate location in
'LEX', so if Flex is required, it is better to check that the user
provided something sufficient by parsing the output of '$LEX
--version' than by simply relying on 'test "x$LEX" = xflex'.
To ensure backward compatibility, Automake's 'AM_PROG_LEX' invokes
(indirectly) this macro twice, which causes an annoying but benign
"'AC_PROG_LEX' invoked multiple times" warning. Future versions of
Automake will fix this issue; meanwhile, just ignore this message.
As part of running the test, this macro may delete any file in the
configuration directory named 'lex.yy.c' or 'lexyy.c'.
The result of this test can be influenced by setting the variable
'LEX' or the cache variable 'ac_cv_prog_LEX'.
-- Macro: AC_PROG_LN_S
If 'ln -s' works on the current file system (the operating system
and file system support symbolic links), set the output variable
'LN_S' to 'ln -s'; otherwise, if 'ln' works, set 'LN_S' to 'ln',
and otherwise set it to 'cp -pR'.
If you make a link in a directory other than the current directory,
its meaning depends on whether 'ln' or 'ln -s' is used. To safely
create links using '$(LN_S)', either find out which form is used
and adjust the arguments, or always invoke 'ln' in the directory
where the link is to be created.
In other words, it does not work to do:
$(LN_S) foo /x/bar
Instead, do:
(cd /x && $(LN_S) foo bar)
-- Macro: AC_PROG_RANLIB
Set output variable 'RANLIB' to 'ranlib' if 'ranlib' is found, and
otherwise to ':' (do nothing).
-- Macro: AC_PROG_SED
Set output variable 'SED' to a Sed implementation that conforms to
Posix and does not have arbitrary length limits. Report an error
if no acceptable Sed is found. *Note Limitations of Usual Tools:
sed, for more information about portability problems with Sed.
The result of this test can be overridden by setting the 'SED'
variable and is cached in the 'ac_cv_path_SED' variable.
-- Macro: AC_PROG_YACC
If 'bison' is found, set output variable 'YACC' to 'bison -o
y.tab.c'. Otherwise, if 'byacc' is found, set 'YACC' to 'byacc'.
Otherwise set 'YACC' to 'yacc'. The result of this test can be
influenced by setting the variable 'YACC' or the cache variable
'ac_cv_prog_YACC'.
File: autoconf.info, Node: Generic Programs, Prev: Particular Programs, Up: Alternative Programs
5.2.2 Generic Program and File Checks
-------------------------------------
These macros are used to find programs not covered by the "particular"
test macros. If you need to check the behavior of a program as well as
find out whether it is present, you have to write your own test for it
(*note Writing Tests::). By default, these macros use the environment
variable 'PATH'. If you need to check for a program that might not be
in the user's 'PATH', you can pass a modified path to use instead, like
this:
AC_PATH_PROG([INETD], [inetd], [/usr/libexec/inetd],
[$PATH$PATH_SEPARATOR/usr/libexec$PATH_SEPARATOR]dnl
[/usr/sbin$PATH_SEPARATOR/usr/etc$PATH_SEPARATOR/etc])
You are strongly encouraged to declare the VARIABLE passed to
'AC_CHECK_PROG' etc. as precious. *Note Setting Output Variables::,
'AC_ARG_VAR', for more details.
-- Macro: AC_CHECK_PROG (VARIABLE, PROG-TO-CHECK-FOR, VALUE-IF-FOUND,
[VALUE-IF-NOT-FOUND], [PATH = $PATH], [REJECT])
Check whether program PROG-TO-CHECK-FOR exists in PATH. If it is
found, set VARIABLE to VALUE-IF-FOUND, otherwise to
VALUE-IF-NOT-FOUND, if given. Always pass over REJECT (an absolute
file name) even if it is the first found in the search path; in
that case, set VARIABLE using the absolute file name of the
PROG-TO-CHECK-FOR found that is not REJECT. If VARIABLE was
already set, do nothing. Calls 'AC_SUBST' for VARIABLE. The
result of this test can be overridden by setting the VARIABLE
variable or the cache variable 'ac_cv_prog_VARIABLE'.
-- Macro: AC_CHECK_PROGS (VARIABLE, PROGS-TO-CHECK-FOR,
[VALUE-IF-NOT-FOUND], [PATH = $PATH])
Check for each program in the blank-separated list
PROGS-TO-CHECK-FOR existing in the PATH. If one is found, set
VARIABLE to the name of that program. Otherwise, continue checking
the next program in the list. If none of the programs in the list
are found, set VARIABLE to VALUE-IF-NOT-FOUND; if
VALUE-IF-NOT-FOUND is not specified, the value of VARIABLE is not
changed. Calls 'AC_SUBST' for VARIABLE. The result of this test
can be overridden by setting the VARIABLE variable or the cache
variable 'ac_cv_prog_VARIABLE'.
-- Macro: AC_CHECK_TARGET_TOOL (VARIABLE, PROG-TO-CHECK-FOR,
[VALUE-IF-NOT-FOUND], [PATH = $PATH])
Like 'AC_CHECK_PROG', but first looks for PROG-TO-CHECK-FOR with a
prefix of the target type as determined by 'AC_CANONICAL_TARGET',
followed by a dash (*note Canonicalizing::). If the tool cannot be
found with a prefix, and if the build and target types are equal,
then it is also searched for without a prefix.
As noted in *note Specifying Target Triplets::, the target is
rarely specified, because most of the time it is the same as the
host: it is the type of system for which any compiler tool in the
package produces code. What this macro looks for is, for example,
_a tool (assembler, linker, etc.) that the compiler driver ('gcc'
for the GNU C Compiler) uses to produce objects, archives or
executables_.
-- Macro: AC_CHECK_TOOL (VARIABLE, PROG-TO-CHECK-FOR,
[VALUE-IF-NOT-FOUND], [PATH = $PATH])
Like 'AC_CHECK_PROG', but first looks for PROG-TO-CHECK-FOR with a
prefix of the host type as specified by '--host', followed by a
dash. For example, if the user runs 'configure --build=x86_64-gnu
--host=i386-gnu', then this call:
AC_CHECK_TOOL([RANLIB], [ranlib], [:])
sets 'RANLIB' to 'i386-gnu-ranlib' if that program exists in PATH,
or otherwise to 'ranlib' if that program exists in PATH, or to ':'
if neither program exists.
When cross-compiling, this macro will issue a warning if no program
prefixed with the host type could be found. For more information,
see *note Specifying Target Triplets::.
-- Macro: AC_CHECK_TARGET_TOOLS (VARIABLE, PROGS-TO-CHECK-FOR,
[VALUE-IF-NOT-FOUND], [PATH = $PATH])
Like 'AC_CHECK_TARGET_TOOL', each of the tools in the list
PROGS-TO-CHECK-FOR are checked with a prefix of the target type as
determined by 'AC_CANONICAL_TARGET', followed by a dash (*note
Canonicalizing::). If none of the tools can be found with a
prefix, and if the build and target types are equal, then the first
one without a prefix is used. If a tool is found, set VARIABLE to
the name of that program. If none of the tools in the list are
found, set VARIABLE to VALUE-IF-NOT-FOUND; if VALUE-IF-NOT-FOUND is
not specified, the value of VARIABLE is not changed. Calls
'AC_SUBST' for VARIABLE.
-- Macro: AC_CHECK_TOOLS (VARIABLE, PROGS-TO-CHECK-FOR,
[VALUE-IF-NOT-FOUND], [PATH = $PATH])
Like 'AC_CHECK_TOOL', each of the tools in the list
PROGS-TO-CHECK-FOR are checked with a prefix of the host type as
determined by 'AC_CANONICAL_HOST', followed by a dash (*note
Canonicalizing::). If none of the tools can be found with a
prefix, then the first one without a prefix is used. If a tool is
found, set VARIABLE to the name of that program. If none of the
tools in the list are found, set VARIABLE to VALUE-IF-NOT-FOUND; if
VALUE-IF-NOT-FOUND is not specified, the value of VARIABLE is not
changed. Calls 'AC_SUBST' for VARIABLE.
When cross-compiling, this macro will issue a warning if no program
prefixed with the host type could be found. For more information,
see *note Specifying Target Triplets::.
-- Macro: AC_PATH_PROG (VARIABLE, PROG-TO-CHECK-FOR,
[VALUE-IF-NOT-FOUND], [PATH = $PATH])
Like 'AC_CHECK_PROG', but set VARIABLE to the absolute name of
PROG-TO-CHECK-FOR if found. The result of this test can be
overridden by setting the VARIABLE variable. A positive result of
this test is cached in the 'ac_cv_path_VARIABLE' variable.
-- Macro: AC_PATH_PROGS (VARIABLE, PROGS-TO-CHECK-FOR,
[VALUE-IF-NOT-FOUND], [PATH = $PATH])
Like 'AC_CHECK_PROGS', but if any of PROGS-TO-CHECK-FOR are found,
set VARIABLE to the absolute name of the program found. The result
of this test can be overridden by setting the VARIABLE variable. A
positive result of this test is cached in the 'ac_cv_path_VARIABLE'
variable.
-- Macro: AC_PATH_PROGS_FEATURE_CHECK (VARIABLE, PROGS-TO-CHECK-FOR,
FEATURE-TEST, [ACTION-IF-NOT-FOUND], [PATH = $PATH])
This macro was introduced in Autoconf 2.62. If VARIABLE is not
empty, then set the cache variable 'ac_cv_path_VARIABLE' to its
value. Otherwise, check for each program in the blank-separated
list PROGS-TO-CHECK-FOR existing in PATH. For each program found,
execute FEATURE-TEST with 'ac_path_VARIABLE' set to the absolute
name of the candidate program. If no invocation of FEATURE-TEST
sets the shell variable 'ac_cv_path_VARIABLE', then
ACTION-IF-NOT-FOUND is executed. FEATURE-TEST will be run even
when 'ac_cv_path_VARIABLE' is set, to provide the ability to choose
a better candidate found later in PATH; to accept the current
setting and bypass all further checks, FEATURE-TEST can execute
'ac_path_VARIABLE_found=:'.
Note that this macro has some subtle differences from
'AC_CHECK_PROGS'. It is designed to be run inside 'AC_CACHE_VAL',
therefore, it should have no side effects. In particular, VARIABLE
is not set to the final value of 'ac_cv_path_VARIABLE', nor is
'AC_SUBST' automatically run. Also, on failure, any action can be
performed, whereas 'AC_CHECK_PROGS' only performs
'VARIABLE=VALUE-IF-NOT-FOUND'.
Here is an example, similar to what Autoconf uses in its own
configure script. It will search for an implementation of 'm4'
that supports the 'indir' builtin, even if it goes by the name
'gm4' or is not the first implementation on 'PATH'.
AC_CACHE_CHECK([for m4 that supports indir], [ac_cv_path_M4],
[AC_PATH_PROGS_FEATURE_CHECK([M4], [m4 gm4],
[[m4out=`echo 'changequote([,])indir([divnum])' | $ac_path_M4`
test "x$m4out" = x0 \
&& ac_cv_path_M4=$ac_path_M4 ac_path_M4_found=:]],
[AC_MSG_ERROR([could not find m4 that supports indir])])])
AC_SUBST([M4], [$ac_cv_path_M4])
-- Macro: AC_PATH_TARGET_TOOL (VARIABLE, PROG-TO-CHECK-FOR,
[VALUE-IF-NOT-FOUND], [PATH = $PATH])
Like 'AC_CHECK_TARGET_TOOL', but set VARIABLE to the absolute name
of the program if it is found.
-- Macro: AC_PATH_TOOL (VARIABLE, PROG-TO-CHECK-FOR,
[VALUE-IF-NOT-FOUND], [PATH = $PATH])
Like 'AC_CHECK_TOOL', but set VARIABLE to the absolute name of the
program if it is found.
When cross-compiling, this macro will issue a warning if no program
prefixed with the host type could be found. For more information,
see *note Specifying Target Triplets::.
File: autoconf.info, Node: Files, Next: Libraries, Prev: Alternative Programs, Up: Existing Tests
5.3 Files
=========
You might also need to check for the existence of files. Before using
these macros, ask yourself whether a runtime test might not be a better
solution. Be aware that, like most Autoconf macros, they test a feature
of the host machine, and therefore, they die when cross-compiling.
-- Macro: AC_CHECK_FILE (FILE, [ACTION-IF-FOUND],
[ACTION-IF-NOT-FOUND])
Check whether file FILE exists on the native system. If it is
found, execute ACTION-IF-FOUND, otherwise do ACTION-IF-NOT-FOUND,
if given. The result of this test is cached in the
'ac_cv_file_FILE' variable, with characters not suitable for a
variable name mapped to underscores.
-- Macro: AC_CHECK_FILES (FILES, [ACTION-IF-FOUND],
[ACTION-IF-NOT-FOUND])
Executes 'AC_CHECK_FILE' once for each file listed in FILES.
Additionally, defines 'HAVE_FILE' (*note Standard Symbols::) for
each file found. The results of each test are cached in the
'ac_cv_file_FILE' variable, with characters not suitable for a
variable name mapped to underscores.
File: autoconf.info, Node: Libraries, Next: Library Functions, Prev: Files, Up: Existing Tests
5.4 Library Files
=================
The following macros check for the presence of certain C, C++, Fortran,
or Go library archive files.
-- Macro: AC_CHECK_LIB (LIBRARY, FUNCTION, [ACTION-IF-FOUND],
[ACTION-IF-NOT-FOUND], [OTHER-LIBRARIES])
Test whether the library LIBRARY is available by trying to link a
test program that calls function FUNCTION with the library.
FUNCTION should be a function provided by the library. Use the
base name of the library; e.g., to check for '-lmp', use 'mp' as
the LIBRARY argument.
ACTION-IF-FOUND is a list of shell commands to run if the link with
the library succeeds; ACTION-IF-NOT-FOUND is a list of shell
commands to run if the link fails. If ACTION-IF-FOUND is not
specified, the default action prepends '-lLIBRARY' to 'LIBS' and
defines 'HAVE_LIBLIBRARY' (in all capitals). This macro is
intended to support building 'LIBS' in a right-to-left
(least-dependent to most-dependent) fashion such that library
dependencies are satisfied as a natural side effect of consecutive
tests. Linkers are sensitive to library ordering so the order in
which 'LIBS' is generated is important to reliable detection of
libraries.
If linking with LIBRARY results in unresolved symbols that would be
resolved by linking with additional libraries, give those libraries
as the OTHER-LIBRARIES argument, separated by spaces: e.g., '-lXt
-lX11'. Otherwise, this macro may fail to detect that LIBRARY is
present, because linking the test program can fail with unresolved
symbols. The OTHER-LIBRARIES argument should be limited to cases
where it is desirable to test for one library in the presence of
another that is not already in 'LIBS'.
'AC_CHECK_LIB' requires some care in usage, and should be avoided
in some common cases. Many standard functions like 'gethostbyname'
appear in the standard C library on some hosts, and in special
libraries like 'nsl' on other hosts. On some hosts the special
libraries contain variant implementations that you may not want to
use. These days it is normally better to use
'AC_SEARCH_LIBS([gethostbyname], [nsl])' instead of
'AC_CHECK_LIB([nsl], [gethostbyname])'.
The result of this test is cached in the
'ac_cv_lib_LIBRARY_FUNCTION' variable.
-- Macro: AC_SEARCH_LIBS (FUNCTION, SEARCH-LIBS, [ACTION-IF-FOUND],
[ACTION-IF-NOT-FOUND], [OTHER-LIBRARIES])
Search for a library defining FUNCTION if it's not already
available. This equates to calling
'AC_LINK_IFELSE([AC_LANG_CALL([], [FUNCTION])])' first with no
libraries, then for each library listed in SEARCH-LIBS.
Prepend '-lLIBRARY' to 'LIBS' for the first library found to
contain FUNCTION, and run ACTION-IF-FOUND. If the function is not
found, run ACTION-IF-NOT-FOUND.
If linking with LIBRARY results in unresolved symbols that would be
resolved by linking with additional libraries, give those libraries
as the OTHER-LIBRARIES argument, separated by spaces: e.g., '-lXt
-lX11'. Otherwise, this macro fails to detect that FUNCTION is
present, because linking the test program always fails with
unresolved symbols.
The result of this test is cached in the 'ac_cv_search_FUNCTION'
variable as 'none required' if FUNCTION is already available, as
'no' if no library containing FUNCTION was found, otherwise as the
'-lLIBRARY' option that needs to be prepended to 'LIBS'.
File: autoconf.info, Node: Library Functions, Next: Header Files, Prev: Libraries, Up: Existing Tests
5.5 Library Functions
=====================
The following macros check for particular C library functions. If there
is no macro specifically defined to check for a function you need, and
you don't need to check for any special properties of it, then you can
use one of the general function-check macros.
* Menu:
* Function Portability:: Pitfalls with usual functions
* Particular Functions:: Special handling to find certain functions
* Generic Functions:: How to find other functions
File: autoconf.info, Node: Function Portability, Next: Particular Functions, Up: Library Functions
5.5.1 Portability of C Functions
--------------------------------
Most usual functions can either be missing, or be buggy, or be limited
on some architectures. This section tries to make an inventory of these
portability issues. By definition, this list always requires additions.
A much more complete list is maintained by the Gnulib project (*note
Gnulib::), covering *note Current Posix Functions: (gnulib)Function
Substitutes, *note Legacy Functions: (gnulib)Legacy Function
Substitutes, and *note Glibc Functions: (gnulib)Glibc Function
Substitutes. Please help us keep the gnulib list as complete as
possible.
'exit'
On ancient hosts, 'exit' returned 'int'. This is because 'exit'
predates 'void', and there was a long tradition of it returning
'int'.
On current hosts, the problem more likely is that 'exit' is not
declared, due to C++ problems of some sort or another. For this
reason we suggest that test programs not invoke 'exit', but return
from 'main' instead.
'free'
The C standard says a call 'free (NULL)' does nothing, but some old
systems don't support this (e.g., NextStep).
'isinf'
'isnan'
The C99 standard says that 'isinf' and 'isnan' are macros. On some
systems just macros are available (e.g., HP-UX and Solaris 10), on
some systems both macros and functions (e.g., glibc 2.3.2), and on
some systems only functions (e.g., IRIX 6 and Solaris 9). In some
cases these functions are declared in nonstandard headers like
'<sunmath.h>' and defined in non-default libraries like '-lm' or
'-lsunmath'.
The C99 'isinf' and 'isnan' macros work correctly with 'long
double' arguments, but pre-C99 systems that use functions typically
assume 'double' arguments. On such a system, 'isinf' incorrectly
returns true for a finite 'long double' argument that is outside
the range of 'double'.
The best workaround for these issues is to use gnulib modules
'isinf' and 'isnan' (*note Gnulib::). But a lighter weight
solution involves code like the following.
#include <math.h>
#ifndef isnan
# define isnan(x) \
(sizeof (x) == sizeof (long double) ? isnan_ld (x) \
: sizeof (x) == sizeof (double) ? isnan_d (x) \
: isnan_f (x))
static inline int isnan_f (float x) { return x != x; }
static inline int isnan_d (double x) { return x != x; }
static inline int isnan_ld (long double x) { return x != x; }
#endif
#ifndef isinf
# define isinf(x) \
(sizeof (x) == sizeof (long double) ? isinf_ld (x) \
: sizeof (x) == sizeof (double) ? isinf_d (x) \
: isinf_f (x))
static inline int isinf_f (float x)
{ return !isnan (x) && isnan (x - x); }
static inline int isinf_d (double x)
{ return !isnan (x) && isnan (x - x); }
static inline int isinf_ld (long double x)
{ return !isnan (x) && isnan (x - x); }
#endif
Use 'AC_C_INLINE' (*note C Compiler::) so that this code works on
compilers that lack the 'inline' keyword. Some optimizing
compilers mishandle these definitions, but systems with that bug
typically have many other floating point corner-case compliance
problems anyway, so it's probably not worth worrying about.
'malloc'
The C standard says a call 'malloc (0)' is implementation
dependent. It can return either 'NULL' or a new non-null pointer.
The latter is more common (e.g., the GNU C Library) but is by no
means universal. 'AC_FUNC_MALLOC' can be used to insist on
non-'NULL' (*note Particular Functions::).
'putenv'
Posix prefers 'setenv' to 'putenv'; among other things, 'putenv' is
not required of all Posix implementations, but 'setenv' is.
Posix specifies that 'putenv' puts the given string directly in
'environ', but some systems make a copy of it instead (e.g., glibc
2.0, or BSD). And when a copy is made, 'unsetenv' might not free
it, causing a memory leak (e.g., FreeBSD 4).
On some systems 'putenv ("FOO")' removes 'FOO' from the
environment, but this is not standard usage and it dumps core on
some systems (e.g., AIX).
On MinGW, a call 'putenv ("FOO=")' removes 'FOO' from the
environment, rather than inserting it with an empty value.
'realloc'
The C standard says a call 'realloc (NULL, size)' is equivalent to
'malloc (size)', but some old systems don't support this (e.g.,
NextStep).
'signal' handler
Normally 'signal' takes a handler function with a return type of
'void', but some old systems required 'int' instead. Any actual
'int' value returned is not used; this is only a difference in the
function prototype demanded.
All systems we know of in current use return 'void'. The 'int' was
to support K&R C, where of course 'void' is not available. The
obsolete macro 'AC_TYPE_SIGNAL' (*note AC_TYPE_SIGNAL::) can be
used to establish the correct type in all cases.
In most cases, it is more robust to use 'sigaction' when it is
available, rather than 'signal'.
'snprintf'
The C99 standard says that if the output array isn't big enough and
if no other errors occur, 'snprintf' and 'vsnprintf' truncate the
output and return the number of bytes that ought to have been
produced. Some older systems return the truncated length (e.g.,
GNU C Library 2.0.x or IRIX 6.5), some a negative value (e.g.,
earlier GNU C Library versions), and some the buffer length without
truncation (e.g., 32-bit Solaris 7). Also, some buggy older
systems ignore the length and overrun the buffer (e.g., 64-bit
Solaris 7).
'sprintf'
The C standard says 'sprintf' and 'vsprintf' return the number of
bytes written. On some ancient systems (SunOS 4 for instance) they
return the buffer pointer instead, but these no longer need to be
worried about.
'sscanf'
On various old systems, e.g., HP-UX 9, 'sscanf' requires that its
input string be writable (though it doesn't actually change it).
This can be a problem when using 'gcc' since it normally puts
constant strings in read-only memory (*note Incompatibilities of
GCC: (gcc)Incompatibilities.). Apparently in some cases even
having format strings read-only can be a problem.
'strerror_r'
Posix specifies that 'strerror_r' returns an 'int', but many
systems (e.g., GNU C Library version 2.2.4) provide a different
version returning a 'char *'. 'AC_FUNC_STRERROR_R' can detect
which is in use (*note Particular Functions::).
'strnlen'
AIX 4.3 provides a broken version which produces the following
results:
strnlen ("foobar", 0) = 0
strnlen ("foobar", 1) = 3
strnlen ("foobar", 2) = 2
strnlen ("foobar", 3) = 1
strnlen ("foobar", 4) = 0
strnlen ("foobar", 5) = 6
strnlen ("foobar", 6) = 6
strnlen ("foobar", 7) = 6
strnlen ("foobar", 8) = 6
strnlen ("foobar", 9) = 6
'sysconf'
'_SC_PAGESIZE' is standard, but some older systems (e.g., HP-UX 9)
have '_SC_PAGE_SIZE' instead. This can be tested with '#ifdef'.
'unlink'
The Posix spec says that 'unlink' causes the given file to be
removed only after there are no more open file handles for it.
Some non-Posix hosts have trouble with this requirement, though,
and some DOS variants even corrupt the file system.
'unsetenv'
On MinGW, 'unsetenv' is not available, but a variable 'FOO' can be
removed with a call 'putenv ("FOO=")', as described under 'putenv'
above.
'va_copy'
The C99 standard provides 'va_copy' for copying 'va_list'
variables. It may be available in older environments too, though
possibly as '__va_copy' (e.g., 'gcc' in strict pre-C99 mode).
These can be tested with '#ifdef'. A fallback to 'memcpy (&dst,
&src, sizeof (va_list))' gives maximum portability.
'va_list'
'va_list' is not necessarily just a pointer. It can be a 'struct'
(e.g., 'gcc' on Alpha), which means 'NULL' is not portable. Or it
can be an array (e.g., 'gcc' in some PowerPC configurations), which
means as a function parameter it can be effectively
call-by-reference and library routines might modify the value back
in the caller (e.g., 'vsnprintf' in the GNU C Library 2.1).
Signed '>>'
Normally the C '>>' right shift of a signed type replicates the
high bit, giving a so-called "arithmetic" shift. But care should
be taken since Standard C doesn't require that behavior. On those
few processors without a native arithmetic shift (for instance Cray
vector systems) zero bits may be shifted in, the same as a shift of
an unsigned type.
Integer '/'
C divides signed integers by truncating their quotient toward zero,
yielding the same result as Fortran. However, before C99 the
standard allowed C implementations to take the floor or ceiling of
the quotient in some cases. Hardly any implementations took
advantage of this freedom, though, and it's probably not worth
worrying about this issue nowadays.
File: autoconf.info, Node: Particular Functions, Next: Generic Functions, Prev: Function Portability, Up: Library Functions
5.5.2 Particular Function Checks
--------------------------------
These macros check for particular C functions--whether they exist, and
in some cases how they respond when given certain arguments.
-- Macro: AC_FUNC_ALLOCA
Check how to get 'alloca'. Tries to get a builtin version by
checking for 'alloca.h' or the predefined C preprocessor macros
'__GNUC__' and '_AIX'. If this macro finds 'alloca.h', it defines
'HAVE_ALLOCA_H'.
If those attempts fail, it looks for the function in the standard C
library. If any of those methods succeed, it defines
'HAVE_ALLOCA'. Otherwise, it sets the output variable 'ALLOCA' to
'${LIBOBJDIR}alloca.o' and defines 'C_ALLOCA' (so programs can
periodically call 'alloca (0)' to garbage collect). This variable
is separate from 'LIBOBJS' so multiple programs can share the value
of 'ALLOCA' without needing to create an actual library, in case
only some of them use the code in 'LIBOBJS'. The '${LIBOBJDIR}'
prefix serves the same purpose as in 'LIBOBJS' (*note AC_LIBOBJ vs
LIBOBJS::).
This macro does not try to get 'alloca' from the System V R3
'libPW' or the System V R4 'libucb' because those libraries contain
some incompatible functions that cause trouble. Some versions do
not even contain 'alloca' or contain a buggy version. If you still
want to use their 'alloca', use 'ar' to extract 'alloca.o' from
them instead of compiling 'alloca.c'.
Source files that use 'alloca' should start with a piece of code
like the following, to declare it properly.
#ifdef STDC_HEADERS
# include <stdlib.h>
# include <stddef.h>
#else
# ifdef HAVE_STDLIB_H
# include <stdlib.h>
# endif
#endif
#ifdef HAVE_ALLOCA_H
# include <alloca.h>
#elif !defined alloca
# ifdef __GNUC__
# define alloca __builtin_alloca
# elif defined _AIX
# define alloca __alloca
# elif defined _MSC_VER
# include <malloc.h>
# define alloca _alloca
# elif !defined HAVE_ALLOCA
# ifdef __cplusplus
extern "C"
# endif
void *alloca (size_t);
# endif
#endif
-- Macro: AC_FUNC_CHOWN
If the 'chown' function is available and works (in particular, it
should accept '-1' for 'uid' and 'gid'), define 'HAVE_CHOWN'. The
result of this macro is cached in the 'ac_cv_func_chown_works'
variable.
-- Macro: AC_FUNC_CLOSEDIR_VOID
If the 'closedir' function does not return a meaningful value,
define 'CLOSEDIR_VOID'. Otherwise, callers ought to check its
return value for an error indicator.
Currently this test is implemented by running a test program. When
cross compiling the pessimistic assumption that 'closedir' does not
return a meaningful value is made.
The result of this macro is cached in the
'ac_cv_func_closedir_void' variable.
This macro is obsolescent, as 'closedir' returns a meaningful value
on current systems. New programs need not use this macro.
-- Macro: AC_FUNC_ERROR_AT_LINE
If the 'error_at_line' function is not found, require an
'AC_LIBOBJ' replacement of 'error'.
The result of this macro is cached in the 'ac_cv_lib_error_at_line'
variable.
The 'AC_FUNC_ERROR_AT_LINE' macro is obsolescent. New programs
should use Gnulib's 'error' module. *Note Gnulib::.
-- Macro: AC_FUNC_FNMATCH
If the 'fnmatch' function conforms to Posix, define 'HAVE_FNMATCH'.
Detect common implementation bugs, for example, the bugs in Solaris
2.4.
Unlike the other specific 'AC_FUNC' macros, 'AC_FUNC_FNMATCH' does
not replace a broken/missing 'fnmatch'. This is for historical
reasons. See 'AC_REPLACE_FNMATCH' below.
The result of this macro is cached in the
'ac_cv_func_fnmatch_works' variable.
This macro is obsolescent. New programs should use Gnulib's
'fnmatch-posix' module. *Note Gnulib::.
-- Macro: AC_FUNC_FNMATCH_GNU
Behave like 'AC_REPLACE_FNMATCH' (_replace_) but also test whether
'fnmatch' supports GNU extensions. Detect common implementation
bugs, for example, the bugs in the GNU C Library 2.1.
The result of this macro is cached in the 'ac_cv_func_fnmatch_gnu'
variable.
This macro is obsolescent. New programs should use Gnulib's
'fnmatch-gnu' module. *Note Gnulib::.
-- Macro: AC_FUNC_FORK
This macro checks for the 'fork' and 'vfork' functions. If a
working 'fork' is found, define 'HAVE_WORKING_FORK'. This macro
checks whether 'fork' is just a stub by trying to run it.
If 'vfork.h' is found, define 'HAVE_VFORK_H'. If a working 'vfork'
is found, define 'HAVE_WORKING_VFORK'. Otherwise, define 'vfork'
to be 'fork' for backward compatibility with previous versions of
'autoconf'. This macro checks for several known errors in
implementations of 'vfork' and considers the system to not have a
working 'vfork' if it detects any of them. It is not considered to
be an implementation error if a child's invocation of 'signal'
modifies the parent's signal handler, since child processes rarely
change their signal handlers.
Since this macro defines 'vfork' only for backward compatibility
with previous versions of 'autoconf' you're encouraged to define it
yourself in new code:
#ifndef HAVE_WORKING_VFORK
# define vfork fork
#endif
The results of this macro are cached in the 'ac_cv_func_fork_works'
and 'ac_cv_func_vfork_works' variables. In order to override the
test, you also need to set the 'ac_cv_func_fork' and
'ac_cv_func_vfork' variables.
-- Macro: AC_FUNC_FSEEKO
If the 'fseeko' function is available, define 'HAVE_FSEEKO'.
Define '_LARGEFILE_SOURCE' if necessary to make the prototype
visible on some systems (e.g., glibc 2.2). Otherwise linkage
problems may occur when compiling with 'AC_SYS_LARGEFILE' on
largefile-sensitive systems where 'off_t' does not default to a
64bit entity. All systems with 'fseeko' also supply 'ftello'.
-- Macro: AC_FUNC_GETGROUPS
If the 'getgroups' function is available and works (unlike on
Ultrix 4.3, where 'getgroups (0, 0)' always fails), define
'HAVE_GETGROUPS'. Set 'GETGROUPS_LIBS' to any libraries needed to
get that function. This macro runs 'AC_TYPE_GETGROUPS'.
-- Macro: AC_FUNC_GETLOADAVG
Check how to get the system load averages. To perform its tests
properly, this macro needs the file 'getloadavg.c'; therefore, be
sure to set the 'AC_LIBOBJ' replacement directory properly (see
*note Generic Functions::, 'AC_CONFIG_LIBOBJ_DIR').
If the system has the 'getloadavg' function, define
'HAVE_GETLOADAVG', and set 'GETLOADAVG_LIBS' to any libraries
necessary to get that function. Also add 'GETLOADAVG_LIBS' to
'LIBS'. Otherwise, require an 'AC_LIBOBJ' replacement for
'getloadavg' with source code in 'DIR/getloadavg.c', and possibly
define several other C preprocessor macros and output variables:
1. Define 'C_GETLOADAVG'.
2. Define 'SVR4', 'DGUX', 'UMAX', or 'UMAX4_3' if on those
systems.
3. If 'nlist.h' is found, define 'HAVE_NLIST_H'.
4. If 'struct nlist' has an 'n_un.n_name' member, define
'HAVE_STRUCT_NLIST_N_UN_N_NAME'. The obsolete symbol
'NLIST_NAME_UNION' is still defined, but do not depend upon
it.
5. Programs may need to be installed set-group-ID (or
set-user-ID) for 'getloadavg' to work. In this case, define
'GETLOADAVG_PRIVILEGED', set the output variable 'NEED_SETGID'
to 'true' (and otherwise to 'false'), and set 'KMEM_GROUP' to
the name of the group that should own the installed program.
The 'AC_FUNC_GETLOADAVG' macro is obsolescent. New programs should
use Gnulib's 'getloadavg' module. *Note Gnulib::.
-- Macro: AC_FUNC_GETMNTENT
Check for 'getmntent' in the standard C library, and then in the
'sun', 'seq', and 'gen' libraries, for UNICOS, IRIX 4, PTX, and
UnixWare, respectively. Then, if 'getmntent' is available, define
'HAVE_GETMNTENT' and set 'ac_cv_func_getmntent' to 'yes'.
Otherwise set 'ac_cv_func_getmntent' to 'no'.
The result of this macro can be overridden by setting the cache
variable 'ac_cv_search_getmntent'.
-- Macro: AC_FUNC_GETPGRP
Define 'GETPGRP_VOID' if it is an error to pass 0 to 'getpgrp';
this is the Posix behavior. On older BSD systems, you must pass 0
to 'getpgrp', as it takes an argument and behaves like Posix's
'getpgid'.
#ifdef GETPGRP_VOID
pid = getpgrp ();
#else
pid = getpgrp (0);
#endif
This macro does not check whether 'getpgrp' exists at all; if you
need to work in that situation, first call 'AC_CHECK_FUNC' for
'getpgrp'.
The result of this macro is cached in the 'ac_cv_func_getpgrp_void'
variable.
This macro is obsolescent, as current systems have a 'getpgrp'
whose signature conforms to Posix. New programs need not use this
macro.
-- Macro: AC_FUNC_LSTAT_FOLLOWS_SLASHED_SYMLINK
If 'link' is a symbolic link, then 'lstat' should treat 'link/' the
same as 'link/.'. However, many older 'lstat' implementations
incorrectly ignore trailing slashes.
It is safe to assume that if 'lstat' incorrectly ignores trailing
slashes, then other symbolic-link-aware functions like 'unlink'
also incorrectly ignore trailing slashes.
If 'lstat' behaves properly, define
'LSTAT_FOLLOWS_SLASHED_SYMLINK', otherwise require an 'AC_LIBOBJ'
replacement of 'lstat'.
The result of this macro is cached in the
'ac_cv_func_lstat_dereferences_slashed_symlink' variable.
The 'AC_FUNC_LSTAT_FOLLOWS_SLASHED_SYMLINK' macro is obsolescent.
New programs should use Gnulib's 'lstat' module. *Note Gnulib::.
-- Macro: AC_FUNC_MALLOC
If the 'malloc' function is compatible with the GNU C library
'malloc' (i.e., 'malloc (0)' returns a valid pointer), define
'HAVE_MALLOC' to 1. Otherwise define 'HAVE_MALLOC' to 0, ask for
an 'AC_LIBOBJ' replacement for 'malloc', and define 'malloc' to
'rpl_malloc' so that the native 'malloc' is not used in the main
project.
Typically, the replacement file 'malloc.c' should look like (note
the '#undef malloc'):
#include <config.h>
#undef malloc
#include <sys/types.h>
void *malloc ();
/* Allocate an N-byte block of memory from the heap.
If N is zero, allocate a 1-byte block. */
void *
rpl_malloc (size_t n)
{
if (n == 0)
n = 1;
return malloc (n);
}
The result of this macro is cached in the
'ac_cv_func_malloc_0_nonnull' variable.
-- Macro: AC_FUNC_MBRTOWC
Define 'HAVE_MBRTOWC' to 1 if the function 'mbrtowc' and the type
'mbstate_t' are properly declared.
The result of this macro is cached in the 'ac_cv_func_mbrtowc'
variable.
-- Macro: AC_FUNC_MEMCMP
If the 'memcmp' function is not available, or does not work on
8-bit data (like the one on SunOS 4.1.3), or fails when comparing
16 bytes or more and with at least one buffer not starting on a
4-byte boundary (such as the one on NeXT x86 OpenStep), require an
'AC_LIBOBJ' replacement for 'memcmp'.
The result of this macro is cached in the
'ac_cv_func_memcmp_working' variable.
This macro is obsolescent, as current systems have a working
'memcmp'. New programs need not use this macro.
-- Macro: AC_FUNC_MKTIME
If the 'mktime' function is not available, or does not work
correctly, require an 'AC_LIBOBJ' replacement for 'mktime'. For
the purposes of this test, 'mktime' should conform to the Posix
standard and should be the inverse of 'localtime'.
The result of this macro is cached in the
'ac_cv_func_working_mktime' variable.
The 'AC_FUNC_MKTIME' macro is obsolescent. New programs should use
Gnulib's 'mktime' module. *Note Gnulib::.
-- Macro: AC_FUNC_MMAP
If the 'mmap' function exists and works correctly, define
'HAVE_MMAP'. This checks only private fixed mapping of
already-mapped memory.
The result of this macro is cached in the
'ac_cv_func_mmap_fixed_mapped' variable.
-- Macro: AC_FUNC_OBSTACK
If the obstacks are found, define 'HAVE_OBSTACK', else require an
'AC_LIBOBJ' replacement for 'obstack'.
The result of this macro is cached in the 'ac_cv_func_obstack'
variable.
-- Macro: AC_FUNC_REALLOC
If the 'realloc' function is compatible with the GNU C library
'realloc' (i.e., 'realloc (NULL, 0)' returns a valid pointer),
define 'HAVE_REALLOC' to 1. Otherwise define 'HAVE_REALLOC' to 0,
ask for an 'AC_LIBOBJ' replacement for 'realloc', and define
'realloc' to 'rpl_realloc' so that the native 'realloc' is not used
in the main project. See 'AC_FUNC_MALLOC' for details.
The result of this macro is cached in the
'ac_cv_func_realloc_0_nonnull' variable.
-- Macro: AC_FUNC_SELECT_ARGTYPES
Determines the correct type to be passed for each of the 'select'
function's arguments, and defines those types in
'SELECT_TYPE_ARG1', 'SELECT_TYPE_ARG234', and 'SELECT_TYPE_ARG5'
respectively. 'SELECT_TYPE_ARG1' defaults to 'int',
'SELECT_TYPE_ARG234' defaults to 'int *', and 'SELECT_TYPE_ARG5'
defaults to 'struct timeval *'.
This macro is obsolescent, as current systems have a 'select' whose
signature conforms to Posix. New programs need not use this macro.
-- Macro: AC_FUNC_SETPGRP
If 'setpgrp' takes no argument (the Posix version), define
'SETPGRP_VOID'. Otherwise, it is the BSD version, which takes two
process IDs as arguments. This macro does not check whether
'setpgrp' exists at all; if you need to work in that situation,
first call 'AC_CHECK_FUNC' for 'setpgrp'.
The result of this macro is cached in the 'ac_cv_func_setpgrp_void'
variable.
This macro is obsolescent, as current systems have a 'setpgrp'
whose signature conforms to Posix. New programs need not use this
macro.
-- Macro: AC_FUNC_STAT
-- Macro: AC_FUNC_LSTAT
Determine whether 'stat' or 'lstat' have the bug that it succeeds
when given the zero-length file name as argument. The 'stat' and
'lstat' from SunOS 4.1.4 and the Hurd (as of 1998-11-01) do this.
If it does, then define 'HAVE_STAT_EMPTY_STRING_BUG' (or
'HAVE_LSTAT_EMPTY_STRING_BUG') and ask for an 'AC_LIBOBJ'
replacement of it.
The results of these macros are cached in the
'ac_cv_func_stat_empty_string_bug' and the
'ac_cv_func_lstat_empty_string_bug' variables, respectively.
These macros are obsolescent, as no current systems have the bug.
New programs need not use these macros.
-- Macro: AC_FUNC_STRCOLL
If the 'strcoll' function exists and works correctly, define
'HAVE_STRCOLL'. This does a bit more than
'AC_CHECK_FUNCS(strcoll)', because some systems have incorrect
definitions of 'strcoll' that should not be used.
The result of this macro is cached in the
'ac_cv_func_strcoll_works' variable.
-- Macro: AC_FUNC_STRERROR_R
If 'strerror_r' is available, define 'HAVE_STRERROR_R', and if it
is declared, define 'HAVE_DECL_STRERROR_R'. If it returns a 'char
*' message, define 'STRERROR_R_CHAR_P'; otherwise it returns an
'int' error number. The Thread-Safe Functions option of Posix
requires 'strerror_r' to return 'int', but many systems (including,
for example, version 2.2.4 of the GNU C Library) return a 'char *'
value that is not necessarily equal to the buffer argument.
The result of this macro is cached in the
'ac_cv_func_strerror_r_char_p' variable.
-- Macro: AC_FUNC_STRFTIME
Check for 'strftime' in the 'intl' library, for SCO Unix. Then, if
'strftime' is available, define 'HAVE_STRFTIME'.
This macro is obsolescent, as no current systems require the 'intl'
library for 'strftime'. New programs need not use this macro.
-- Macro: AC_FUNC_STRTOD
If the 'strtod' function does not exist or doesn't work correctly,
ask for an 'AC_LIBOBJ' replacement of 'strtod'. In this case,
because 'strtod.c' is likely to need 'pow', set the output variable
'POW_LIB' to the extra library needed.
This macro caches its result in the 'ac_cv_func_strtod' variable
and depends upon the result in the 'ac_cv_func_pow' variable.
The 'AC_FUNC_STRTOD' macro is obsolescent. New programs should use
Gnulib's 'strtod' module. *Note Gnulib::.
-- Macro: AC_FUNC_STRTOLD
If the 'strtold' function exists and conforms to C99, define
'HAVE_STRTOLD'.
This macro caches its result in the 'ac_cv_func_strtold' variable.
-- Macro: AC_FUNC_STRNLEN
If the 'strnlen' function is not available, or is buggy (like the
one from AIX 4.3), require an 'AC_LIBOBJ' replacement for it.
This macro caches its result in the 'ac_cv_func_strnlen_working'
variable.
-- Macro: AC_FUNC_UTIME_NULL
If 'utime (FILE, NULL)' sets FILE's timestamp to the present,
define 'HAVE_UTIME_NULL'.
This macro caches its result in the 'ac_cv_func_utime_null'
variable.
This macro is obsolescent, as all current systems have a 'utime'
that behaves this way. New programs need not use this macro.
-- Macro: AC_FUNC_VPRINTF
If 'vprintf' is found, define 'HAVE_VPRINTF'. Otherwise, if
'_doprnt' is found, define 'HAVE_DOPRNT'. (If 'vprintf' is
available, you may assume that 'vfprintf' and 'vsprintf' are also
available.)
This macro is obsolescent, as all current systems have 'vprintf'.
New programs need not use this macro.
-- Macro: AC_REPLACE_FNMATCH
If the 'fnmatch' function does not conform to Posix (see
'AC_FUNC_FNMATCH'), ask for its 'AC_LIBOBJ' replacement.
The files 'fnmatch.c', 'fnmatch_loop.c', and 'fnmatch_.h' in the
'AC_LIBOBJ' replacement directory are assumed to contain a copy of
the source code of GNU 'fnmatch'. If necessary, this source code
is compiled as an 'AC_LIBOBJ' replacement, and the 'fnmatch_.h'
file is linked to 'fnmatch.h' so that it can be included in place
of the system '<fnmatch.h>'.
This macro caches its result in the 'ac_cv_func_fnmatch_works'
variable.
This macro is obsolescent, as it assumes the use of particular
source files. New programs should use Gnulib's 'fnmatch-posix'
module, which provides this macro along with the source files.
*Note Gnulib::.
File: autoconf.info, Node: Generic Functions, Prev: Particular Functions, Up: Library Functions
5.5.3 Generic Function Checks
-----------------------------
These macros are used to find functions not covered by the "particular"
test macros. If the functions might be in libraries other than the
default C library, first call 'AC_CHECK_LIB' for those libraries. If
you need to check the behavior of a function as well as find out whether
it is present, you have to write your own test for it (*note Writing
Tests::).
-- Macro: AC_CHECK_FUNC (FUNCTION, [ACTION-IF-FOUND],
[ACTION-IF-NOT-FOUND])
If C function FUNCTION is available, run shell commands
ACTION-IF-FOUND, otherwise ACTION-IF-NOT-FOUND. If you just want
to define a symbol if the function is available, consider using
'AC_CHECK_FUNCS' instead. This macro checks for functions with C
linkage even when 'AC_LANG(C++)' has been called, since C is more
standardized than C++. (*note Language Choice::, for more
information about selecting the language for checks.)
This macro caches its result in the 'ac_cv_func_FUNCTION' variable.
-- Macro: AC_CHECK_FUNCS (FUNCTION..., [ACTION-IF-FOUND],
[ACTION-IF-NOT-FOUND])
For each FUNCTION enumerated in the blank-or-newline-separated
argument list, define 'HAVE_FUNCTION' (in all capitals) if it is
available. If ACTION-IF-FOUND is given, it is additional shell
code to execute when one of the functions is found. You can give
it a value of 'break' to break out of the loop on the first match.
If ACTION-IF-NOT-FOUND is given, it is executed when one of the
functions is not found.
Results are cached for each FUNCTION as in 'AC_CHECK_FUNC'.
-- Macro: AC_CHECK_FUNCS_ONCE (FUNCTION...)
For each FUNCTION enumerated in the blank-or-newline-separated
argument list, define 'HAVE_FUNCTION' (in all capitals) if it is
available. This is a once-only variant of 'AC_CHECK_FUNCS'. It
generates the checking code at most once, so that 'configure' is
smaller and faster; but the checks cannot be conditionalized and
are always done once, early during the 'configure' run.
Autoconf follows a philosophy that was formed over the years by those
who have struggled for portability: isolate the portability issues in
specific files, and then program as if you were in a Posix environment.
Some functions may be missing or unfixable, and your package must be
ready to replace them.
Suitable replacements for many such problem functions are available
from Gnulib (*note Gnulib::).
-- Macro: AC_LIBOBJ (FUNCTION)
Specify that 'FUNCTION.c' must be included in the executables to
replace a missing or broken implementation of FUNCTION.
Technically, it adds 'FUNCTION.$ac_objext' to the output variable
'LIBOBJS' if it is not already in, and calls 'AC_LIBSOURCE' for
'FUNCTION.c'. You should not directly change 'LIBOBJS', since this
is not traceable.
-- Macro: AC_LIBSOURCE (FILE)
Specify that FILE might be needed to compile the project. If you
need to know what files might be needed by a 'configure.ac', you
should trace 'AC_LIBSOURCE'. FILE must be a literal.
This macro is called automatically from 'AC_LIBOBJ', but you must
call it explicitly if you pass a shell variable to 'AC_LIBOBJ'. In
that case, since shell variables cannot be traced statically, you
must pass to 'AC_LIBSOURCE' any possible files that the shell
variable might cause 'AC_LIBOBJ' to need. For example, if you want
to pass a variable '$foo_or_bar' to 'AC_LIBOBJ' that holds either
'"foo"' or '"bar"', you should do:
AC_LIBSOURCE([foo.c])
AC_LIBSOURCE([bar.c])
AC_LIBOBJ([$foo_or_bar])
There is usually a way to avoid this, however, and you are
encouraged to simply call 'AC_LIBOBJ' with literal arguments.
Note that this macro replaces the obsolete 'AC_LIBOBJ_DECL', with
slightly different semantics: the old macro took the function name,
e.g., 'foo', as its argument rather than the file name.
-- Macro: AC_LIBSOURCES (FILES)
Like 'AC_LIBSOURCE', but accepts one or more FILES in a
comma-separated M4 list. Thus, the above example might be
rewritten:
AC_LIBSOURCES([foo.c, bar.c])
AC_LIBOBJ([$foo_or_bar])
-- Macro: AC_CONFIG_LIBOBJ_DIR (DIRECTORY)
Specify that 'AC_LIBOBJ' replacement files are to be found in
DIRECTORY, a name relative to the top level of the source tree.
The replacement directory defaults to '.', the top level directory,
and the most typical value is 'lib', corresponding to
'AC_CONFIG_LIBOBJ_DIR([lib])'.
'configure' might need to know the replacement directory for the
following reasons: (i) some checks use the replacement files, (ii)
some macros bypass broken system headers by installing links to the
replacement headers (iii) when used in conjunction with Automake,
within each makefile, DIRECTORY is used as a relative path from
'$(top_srcdir)' to each object named in 'LIBOBJS' and 'LTLIBOBJS',
etc.
It is common to merely check for the existence of a function, and ask
for its 'AC_LIBOBJ' replacement if missing. The following macro is a
convenient shorthand.
-- Macro: AC_REPLACE_FUNCS (FUNCTION...)
Like 'AC_CHECK_FUNCS', but uses 'AC_LIBOBJ(FUNCTION)' as
ACTION-IF-NOT-FOUND. You can declare your replacement function by
enclosing the prototype in '#ifndef HAVE_FUNCTION'. If the system
has the function, it probably declares it in a header file you
should be including, so you shouldn't redeclare it lest your
declaration conflict.
File: autoconf.info, Node: Header Files, Next: Declarations, Prev: Library Functions, Up: Existing Tests
5.6 Header Files
================
The following macros check for the presence of certain C header files.
If there is no macro specifically defined to check for a header file you
need, and you don't need to check for any special properties of it, then
you can use one of the general header-file check macros.
* Menu:
* Header Portability:: Collected knowledge on common headers
* Particular Headers:: Special handling to find certain headers
* Generic Headers:: How to find other headers
File: autoconf.info, Node: Header Portability, Next: Particular Headers, Up: Header Files
5.6.1 Portability of Headers
----------------------------
This section documents some collected knowledge about common headers,
and the problems they cause. By definition, this list always requires
additions. A much more complete list is maintained by the Gnulib
project (*note Gnulib::), covering *note Posix Headers: (gnulib)Header
File Substitutes. and *note Glibc Headers: (gnulib)Glibc Header File
Substitutes. Please help us keep the gnulib list as complete as
possible.
'limits.h'
C99 says that 'limits.h' defines 'LLONG_MIN', 'LLONG_MAX', and
'ULLONG_MAX', but many almost-C99 environments (e.g., default GCC
4.0.2 + glibc 2.4) do not define them.
'inttypes.h' vs. 'stdint.h'
The C99 standard says that 'inttypes.h' includes 'stdint.h', so
there's no need to include 'stdint.h' separately in a standard
environment. Some implementations have 'inttypes.h' but not
'stdint.h' (e.g., Solaris 7), but we don't know of any
implementation that has 'stdint.h' but not 'inttypes.h'.
'linux/irda.h'
It requires 'linux/types.h' and 'sys/socket.h'.
'linux/random.h'
It requires 'linux/types.h'.
'net/if.h'
On Darwin, this file requires that 'sys/socket.h' be included
beforehand. One should run:
AC_CHECK_HEADERS([sys/socket.h])
AC_CHECK_HEADERS([net/if.h], [], [],
[#include <stdio.h>
#ifdef STDC_HEADERS
# include <stdlib.h>
# include <stddef.h>
#else
# ifdef HAVE_STDLIB_H
# include <stdlib.h>
# endif
#endif
#ifdef HAVE_SYS_SOCKET_H
# include <sys/socket.h>
#endif
])
'netinet/if_ether.h'
On Darwin, this file requires that 'stdio.h' and 'sys/socket.h' be
included beforehand. One should run:
AC_CHECK_HEADERS([sys/socket.h])
AC_CHECK_HEADERS([netinet/if_ether.h], [], [],
[#include <stdio.h>
#ifdef STDC_HEADERS
# include <stdlib.h>
# include <stddef.h>
#else
# ifdef HAVE_STDLIB_H
# include <stdlib.h>
# endif
#endif
#ifdef HAVE_SYS_SOCKET_H
# include <sys/socket.h>
#endif
])
'stdint.h'
See above, item 'inttypes.h' vs. 'stdint.h'.
'stdlib.h'
On many systems (e.g., Darwin), 'stdio.h' is a prerequisite.
'sys/mount.h'
On FreeBSD 4.8 on ia32 and using gcc version 2.95.4, 'sys/params.h'
is a prerequisite.
'sys/ptem.h'
On Solaris 8, 'sys/stream.h' is a prerequisite.
'sys/socket.h'
On Darwin, 'stdlib.h' is a prerequisite.
'sys/ucred.h'
On Tru64 5.1, 'sys/types.h' is a prerequisite.
'X11/extensions/scrnsaver.h'
Using XFree86, this header requires 'X11/Xlib.h', which is probably
so required that you might not even consider looking for it.
AC_CHECK_HEADERS([X11/extensions/scrnsaver.h], [], [],
[[#include <X11/Xlib.h>
]])
File: autoconf.info, Node: Particular Headers, Next: Generic Headers, Prev: Header Portability, Up: Header Files
5.6.2 Particular Header Checks
------------------------------
These macros check for particular system header files--whether they
exist, and in some cases whether they declare certain symbols.
-- Macro: AC_CHECK_HEADER_STDBOOL
Check whether 'stdbool.h' exists and conforms to C99, and cache the
result in the 'ac_cv_header_stdbool_h' variable. If the type
'_Bool' is defined, define 'HAVE__BOOL' to 1.
This macro is intended for use by Gnulib (*note Gnulib::) and other
packages that supply a substitute 'stdbool.h' on platforms lacking
a conforming one. The 'AC_HEADER_STDBOOL' macro is better for code
that explicitly checks for 'stdbool.h'.
-- Macro: AC_HEADER_ASSERT
Check whether to enable assertions in the style of 'assert.h'.
Assertions are enabled by default, but the user can override this
by invoking 'configure' with the '--disable-assert' option.
-- Macro: AC_HEADER_DIRENT
Check for the following header files. For the first one that is
found and defines 'DIR', define the listed C preprocessor macro:
'dirent.h' 'HAVE_DIRENT_H'
'sys/ndir.h' 'HAVE_SYS_NDIR_H'
'sys/dir.h' 'HAVE_SYS_DIR_H'
'ndir.h' 'HAVE_NDIR_H'
The directory-library declarations in your source code should look
something like the following:
#include <sys/types.h>
#ifdef HAVE_DIRENT_H
# include <dirent.h>
# define NAMLEN(dirent) strlen ((dirent)->d_name)
#else
# define dirent direct
# define NAMLEN(dirent) ((dirent)->d_namlen)
# ifdef HAVE_SYS_NDIR_H
# include <sys/ndir.h>
# endif
# ifdef HAVE_SYS_DIR_H
# include <sys/dir.h>
# endif
# ifdef HAVE_NDIR_H
# include <ndir.h>
# endif
#endif
Using the above declarations, the program would declare variables
to be of type 'struct dirent', not 'struct direct', and would
access the length of a directory entry name by passing a pointer to
a 'struct dirent' to the 'NAMLEN' macro.
This macro also checks for the SCO Xenix 'dir' and 'x' libraries.
This macro is obsolescent, as all current systems with directory
libraries have '<dirent.h>'. New programs need not use this macro.
Also see 'AC_STRUCT_DIRENT_D_INO' and 'AC_STRUCT_DIRENT_D_TYPE'
(*note Particular Structures::).
-- Macro: AC_HEADER_MAJOR
If 'sys/types.h' does not define 'major', 'minor', and 'makedev',
but 'sys/mkdev.h' does, define 'MAJOR_IN_MKDEV'; otherwise, if
'sys/sysmacros.h' does, define 'MAJOR_IN_SYSMACROS'.
-- Macro: AC_HEADER_RESOLV
Checks for header 'resolv.h', checking for prerequisites first. To
properly use 'resolv.h', your code should contain something like
the following:
#ifdef HAVE_SYS_TYPES_H
# include <sys/types.h>
#endif
#ifdef HAVE_NETINET_IN_H
# include <netinet/in.h> /* inet_ functions / structs */
#endif
#ifdef HAVE_ARPA_NAMESER_H
# include <arpa/nameser.h> /* DNS HEADER struct */
#endif
#ifdef HAVE_NETDB_H
# include <netdb.h>
#endif
#include <resolv.h>
-- Macro: AC_HEADER_STAT
If the macros 'S_ISDIR', 'S_ISREG', etc. defined in 'sys/stat.h' do
not work properly (returning false positives), define
'STAT_MACROS_BROKEN'. This is the case on Tektronix UTekV, Amdahl
UTS and Motorola System V/88.
This macro is obsolescent, as no current systems have the bug. New
programs need not use this macro.
-- Macro: AC_HEADER_STDBOOL
If 'stdbool.h' exists and conforms to C99, define 'HAVE_STDBOOL_H'
to 1; if the type '_Bool' is defined, define 'HAVE__BOOL' to 1. To
fulfill the C99 requirements, your program could contain the
following code:
#ifdef HAVE_STDBOOL_H
# include <stdbool.h>
#else
# ifndef HAVE__BOOL
# ifdef __cplusplus
typedef bool _Bool;
# else
# define _Bool signed char
# endif
# endif
# define bool _Bool
# define false 0
# define true 1
# define __bool_true_false_are_defined 1
#endif
Alternatively you can use the 'stdbool' package of Gnulib (*note
Gnulib::). It simplifies your code so that it can say just
'#include <stdbool.h>', and it adds support for less-common
platforms.
This macro caches its result in the 'ac_cv_header_stdbool_h'
variable.
This macro differs from 'AC_CHECK_HEADER_STDBOOL' only in that it
defines 'HAVE_STDBOOL_H' whereas 'AC_CHECK_HEADER_STDBOOL' does
not.
-- Macro: AC_HEADER_STDC
Define 'STDC_HEADERS' if the system has C header files conforming
to ANSI C89 (ISO C90). Specifically, this macro checks for
'stdlib.h', 'stdarg.h', 'string.h', and 'float.h'; if the system
has those, it probably has the rest of the C89 header files. This
macro also checks whether 'string.h' declares 'memchr' (and thus
presumably the other 'mem' functions), whether 'stdlib.h' declare
'free' (and thus presumably 'malloc' and other related functions),
and whether the 'ctype.h' macros work on characters with the high
bit set, as the C standard requires.
If you use this macro, your code can refer to 'STDC_HEADERS' to
determine whether the system has conforming header files (and
probably C library functions).
This macro caches its result in the 'ac_cv_header_stdc' variable.
This macro is obsolescent, as current systems have conforming
header files. New programs need not use this macro.
Nowadays 'string.h' is part of the C standard and declares
functions like 'strcpy', and 'strings.h' is standardized by Posix
and declares BSD functions like 'bcopy'; but historically, string
functions were a major sticking point in this area. If you still
want to worry about portability to ancient systems without standard
headers, there is so much variation that it is probably easier to
declare the functions you use than to figure out exactly what the
system header files declare. Some ancient systems contained a mix
of functions from the C standard and from BSD; some were mostly
standard but lacked 'memmove'; some defined the BSD functions as
macros in 'string.h' or 'strings.h'; some had only the BSD
functions but 'string.h'; some declared the memory functions in
'memory.h', some in 'string.h'; etc. It is probably sufficient to
check for one string function and one memory function; if the
library had the standard versions of those then it probably had
most of the others. If you put the following in 'configure.ac':
# This example is obsolescent.
# Nowadays you can omit these macro calls.
AC_HEADER_STDC
AC_CHECK_FUNCS([strchr memcpy])
then, in your code, you can use declarations like this:
/* This example is obsolescent.
Nowadays you can just #include <string.h>. */
#ifdef STDC_HEADERS
# include <string.h>
#else
# ifndef HAVE_STRCHR
# define strchr index
# define strrchr rindex
# endif
char *strchr (), *strrchr ();
# ifndef HAVE_MEMCPY
# define memcpy(d, s, n) bcopy ((s), (d), (n))
# define memmove(d, s, n) bcopy ((s), (d), (n))
# endif
#endif
If you use a function like 'memchr', 'memset', 'strtok', or
'strspn', which have no BSD equivalent, then macros don't suffice
to port to ancient hosts; you must provide an implementation of
each function. An easy way to incorporate your implementations
only when needed (since the ones in system C libraries may be hand
optimized) is to, taking 'memchr' for example, put it in 'memchr.c'
and use 'AC_REPLACE_FUNCS([memchr])'.
-- Macro: AC_HEADER_SYS_WAIT
If 'sys/wait.h' exists and is compatible with Posix, define
'HAVE_SYS_WAIT_H'. Incompatibility can occur if 'sys/wait.h' does
not exist, or if it uses the old BSD 'union wait' instead of 'int'
to store a status value. If 'sys/wait.h' is not Posix compatible,
then instead of including it, define the Posix macros with their
usual interpretations. Here is an example:
#include <sys/types.h>
#ifdef HAVE_SYS_WAIT_H
# include <sys/wait.h>
#endif
#ifndef WEXITSTATUS
# define WEXITSTATUS(stat_val) ((unsigned int) (stat_val) >> 8)
#endif
#ifndef WIFEXITED
# define WIFEXITED(stat_val) (((stat_val) & 255) == 0)
#endif
This macro caches its result in the 'ac_cv_header_sys_wait_h'
variable.
This macro is obsolescent, as current systems are compatible with
Posix. New programs need not use this macro.
'_POSIX_VERSION' is defined when 'unistd.h' is included on Posix
systems. If there is no 'unistd.h', it is definitely not a Posix
system. However, some non-Posix systems do have 'unistd.h'.
The way to check whether the system supports Posix is:
#ifdef HAVE_UNISTD_H
# include <sys/types.h>
# include <unistd.h>
#endif
#ifdef _POSIX_VERSION
/* Code for Posix systems. */
#endif
-- Macro: AC_HEADER_TIME
If a program may include both 'time.h' and 'sys/time.h', define
'TIME_WITH_SYS_TIME'. On some ancient systems, 'sys/time.h'
included 'time.h', but 'time.h' was not protected against multiple
inclusion, so programs could not explicitly include both files.
This macro is useful in programs that use, for example, 'struct
timeval' as well as 'struct tm'. It is best used in conjunction
with 'HAVE_SYS_TIME_H', which can be checked for using
'AC_CHECK_HEADERS([sys/time.h])'.
#ifdef TIME_WITH_SYS_TIME
# include <sys/time.h>
# include <time.h>
#else
# ifdef HAVE_SYS_TIME_H
# include <sys/time.h>
# else
# include <time.h>
# endif
#endif
This macro caches its result in the 'ac_cv_header_time' variable.
This macro is obsolescent, as current systems can include both
files when they exist. New programs need not use this macro.
-- Macro: AC_HEADER_TIOCGWINSZ
If the use of 'TIOCGWINSZ' requires '<sys/ioctl.h>', then define
'GWINSZ_IN_SYS_IOCTL'. Otherwise 'TIOCGWINSZ' can be found in
'<termios.h>'.
Use:
#ifdef HAVE_TERMIOS_H
# include <termios.h>
#endif
#ifdef GWINSZ_IN_SYS_IOCTL
# include <sys/ioctl.h>
#endif
File: autoconf.info, Node: Generic Headers, Prev: Particular Headers, Up: Header Files
5.6.3 Generic Header Checks
---------------------------
These macros are used to find system header files not covered by the
"particular" test macros. If you need to check the contents of a header
as well as find out whether it is present, you have to write your own
test for it (*note Writing Tests::).
-- Macro: AC_CHECK_HEADER (HEADER-FILE, [ACTION-IF-FOUND],
[ACTION-IF-NOT-FOUND], [INCLUDES])
If the system header file HEADER-FILE is compilable, execute shell
commands ACTION-IF-FOUND, otherwise execute ACTION-IF-NOT-FOUND.
If you just want to define a symbol if the header file is
available, consider using 'AC_CHECK_HEADERS' instead.
INCLUDES is decoded to determine the appropriate include
directives. If omitted or empty, 'configure' will check for both
header existence (with the preprocessor) and usability (with the
compiler), using 'AC_INCLUDES_DEFAULT' for the compile test. If
there is a discrepancy between the results, a warning is issued to
the user, and the compiler results are favored (*note Present But
Cannot Be Compiled::). In general, favoring the compiler results
means that a header will be treated as not found even though the
file exists, because you did not provide enough prerequisites.
Providing a non-empty INCLUDES argument allows the code to provide
any prerequisites prior to including the header under test; it is
common to use the argument 'AC_INCLUDES_DEFAULT' (*note Default
Includes::). With an explicit fourth argument, no preprocessor
test is needed. As a special case, an INCLUDES of exactly '-'
triggers the older preprocessor check, which merely determines
existence of the file in the preprocessor search path; this should
only be used as a last resort (it is safer to determine the actual
prerequisites and perform a compiler check, or else use
'AC_PREPROC_IFELSE' to make it obvious that only a preprocessor
check is desired).
This macro caches its result in the 'ac_cv_header_HEADER-FILE'
variable, with characters not suitable for a variable name mapped
to underscores.
-- Macro: AC_CHECK_HEADERS (HEADER-FILE..., [ACTION-IF-FOUND],
[ACTION-IF-NOT-FOUND], [INCLUDES])
For each given system header file HEADER-FILE in the
blank-separated argument list that exists, define
'HAVE_HEADER-FILE' (in all capitals). If ACTION-IF-FOUND is given,
it is additional shell code to execute when one of the header files
is found. You can give it a value of 'break' to break out of the
loop on the first match. If ACTION-IF-NOT-FOUND is given, it is
executed when one of the header files is not found.
INCLUDES is interpreted as in 'AC_CHECK_HEADER', in order to choose
the set of preprocessor directives supplied before the header under
test.
This macro caches its result in the 'ac_cv_header_HEADER-FILE'
variable, with characters not suitable for a variable name mapped
to underscores.
Previous versions of Autoconf merely checked whether the header was
accepted by the preprocessor. This was changed because the old test was
inappropriate for typical uses. Headers are typically used to compile,
not merely to preprocess, and the old behavior sometimes accepted
headers that clashed at compile-time (*note Present But Cannot Be
Compiled::). If you need to check whether a header is preprocessable,
you can use 'AC_PREPROC_IFELSE' (*note Running the Preprocessor::).
Actually requiring a header to compile improves the robustness of the
test, but it also requires that you make sure that headers that must be
included before the HEADER-FILE be part of the INCLUDES, (*note Default
Includes::). If looking for 'bar.h', which requires that 'foo.h' be
included before if it exists, we suggest the following scheme:
AC_CHECK_HEADERS([foo.h])
AC_CHECK_HEADERS([bar.h], [], [],
[#ifdef HAVE_FOO_H
# include <foo.h>
#endif
])
The following variant generates smaller, faster 'configure' files if
you do not need the full power of 'AC_CHECK_HEADERS'.
-- Macro: AC_CHECK_HEADERS_ONCE (HEADER-FILE...)
For each given system header file HEADER-FILE in the
blank-separated argument list that exists, define
'HAVE_HEADER-FILE' (in all capitals). This is a once-only variant
of 'AC_CHECK_HEADERS'. It generates the checking code at most
once, so that 'configure' is smaller and faster; but the checks
cannot be conditionalized and are always done once, early during
the 'configure' run. Thus, this macro is only safe for checking
headers that do not have prerequisites beyond what
'AC_INCLUDES_DEFAULT' provides.
File: autoconf.info, Node: Declarations, Next: Structures, Prev: Header Files, Up: Existing Tests
5.7 Declarations
================
The following macros check for the declaration of variables and
functions. If there is no macro specifically defined to check for a
symbol you need, then you can use the general macros (*note Generic
Declarations::) or, for more complex tests, you may use
'AC_COMPILE_IFELSE' (*note Running the Compiler::).
* Menu:
* Particular Declarations:: Macros to check for certain declarations
* Generic Declarations:: How to find other declarations
File: autoconf.info, Node: Particular Declarations, Next: Generic Declarations, Up: Declarations
5.7.1 Particular Declaration Checks
-----------------------------------
There are no specific macros for declarations.
File: autoconf.info, Node: Generic Declarations, Prev: Particular Declarations, Up: Declarations
5.7.2 Generic Declaration Checks
--------------------------------
These macros are used to find declarations not covered by the
"particular" test macros.
-- Macro: AC_CHECK_DECL (SYMBOL, [ACTION-IF-FOUND],
[ACTION-IF-NOT-FOUND], [INCLUDES = AC_INCLUDES_DEFAULT])
If SYMBOL (a function, variable, or constant) is not declared in
INCLUDES and a declaration is needed, run the shell commands
ACTION-IF-NOT-FOUND, otherwise ACTION-IF-FOUND. INCLUDES is a
series of include directives, defaulting to 'AC_INCLUDES_DEFAULT'
(*note Default Includes::), which are used prior to the declaration
under test.
This macro actually tests whether SYMBOL is defined as a macro or
can be used as an r-value, not whether it is really declared,
because it is much safer to avoid introducing extra declarations
when they are not needed. In order to facilitate use of C++ and
overloaded function declarations, it is possible to specify
function argument types in parentheses for types which can be
zero-initialized:
AC_CHECK_DECL([basename(char *)])
This macro caches its result in the 'ac_cv_have_decl_SYMBOL'
variable, with characters not suitable for a variable name mapped
to underscores.
-- Macro: AC_CHECK_DECLS (SYMBOLS, [ACTION-IF-FOUND],
[ACTION-IF-NOT-FOUND], [INCLUDES = AC_INCLUDES_DEFAULT])
For each of the SYMBOLS (_comma_-separated list with optional
function argument types for C++ overloads), define
'HAVE_DECL_SYMBOL' (in all capitals) to '1' if SYMBOL is declared,
otherwise to '0'. If ACTION-IF-NOT-FOUND is given, it is
additional shell code to execute when one of the function
declarations is needed, otherwise ACTION-IF-FOUND is executed.
INCLUDES is a series of include directives, defaulting to
'AC_INCLUDES_DEFAULT' (*note Default Includes::), which are used
prior to the declarations under test.
This macro uses an M4 list as first argument:
AC_CHECK_DECLS([strdup])
AC_CHECK_DECLS([strlen])
AC_CHECK_DECLS([malloc, realloc, calloc, free])
AC_CHECK_DECLS([j0], [], [], [[#include <math.h>]])
AC_CHECK_DECLS([[basename(char *)], [dirname(char *)]])
Unlike the other 'AC_CHECK_*S' macros, when a SYMBOL is not
declared, 'HAVE_DECL_SYMBOL' is defined to '0' instead of leaving
'HAVE_DECL_SYMBOL' undeclared. When you are _sure_ that the check
was performed, use 'HAVE_DECL_SYMBOL' in '#if':
#if !HAVE_DECL_SYMBOL
extern char *symbol;
#endif
If the test may have not been performed, however, because it is
safer _not_ to declare a symbol than to use a declaration that
conflicts with the system's one, you should use:
#if defined HAVE_DECL_MALLOC && !HAVE_DECL_MALLOC
void *malloc (size_t *s);
#endif
You fall into the second category only in extreme situations:
either your files may be used without being configured, or they are
used during the configuration. In most cases the traditional
approach is enough.
This macro caches its results in 'ac_cv_have_decl_SYMBOL'
variables, with characters not suitable for a variable name mapped
to underscores.
-- Macro: AC_CHECK_DECLS_ONCE (SYMBOLS)
For each of the SYMBOLS (_comma_-separated list), define
'HAVE_DECL_SYMBOL' (in all capitals) to '1' if SYMBOL is declared
in the default include files, otherwise to '0'. This is a
once-only variant of 'AC_CHECK_DECLS'. It generates the checking
code at most once, so that 'configure' is smaller and faster; but
the checks cannot be conditionalized and are always done once,
early during the 'configure' run.
File: autoconf.info, Node: Structures, Next: Types, Prev: Declarations, Up: Existing Tests
5.8 Structures
==============
The following macros check for the presence of certain members in C
structures. If there is no macro specifically defined to check for a
member you need, then you can use the general structure-member macros
(*note Generic Structures::) or, for more complex tests, you may use
'AC_COMPILE_IFELSE' (*note Running the Compiler::).
* Menu:
* Particular Structures:: Macros to check for certain structure members
* Generic Structures:: How to find other structure members
File: autoconf.info, Node: Particular Structures, Next: Generic Structures, Up: Structures
5.8.1 Particular Structure Checks
---------------------------------
The following macros check for certain structures or structure members.
-- Macro: AC_STRUCT_DIRENT_D_INO
Perform all the actions of 'AC_HEADER_DIRENT' (*note Particular
Headers::). Then, if 'struct dirent' contains a 'd_ino' member,
define 'HAVE_STRUCT_DIRENT_D_INO'.
'HAVE_STRUCT_DIRENT_D_INO' indicates only the presence of 'd_ino',
not whether its contents are always reliable. Traditionally, a
zero 'd_ino' indicated a deleted directory entry, though current
systems hide this detail from the user and never return zero
'd_ino' values. Many current systems report an incorrect 'd_ino'
for a directory entry that is a mount point.
-- Macro: AC_STRUCT_DIRENT_D_TYPE
Perform all the actions of 'AC_HEADER_DIRENT' (*note Particular
Headers::). Then, if 'struct dirent' contains a 'd_type' member,
define 'HAVE_STRUCT_DIRENT_D_TYPE'.
-- Macro: AC_STRUCT_ST_BLOCKS
If 'struct stat' contains an 'st_blocks' member, define
'HAVE_STRUCT_STAT_ST_BLOCKS'. Otherwise, require an 'AC_LIBOBJ'
replacement of 'fileblocks'. The former name, 'HAVE_ST_BLOCKS' is
to be avoided, as its support will cease in the future.
This macro caches its result in the
'ac_cv_member_struct_stat_st_blocks' variable.
-- Macro: AC_STRUCT_TM
If 'time.h' does not define 'struct tm', define 'TM_IN_SYS_TIME',
which means that including 'sys/time.h' had better define 'struct
tm'.
This macro is obsolescent, as 'time.h' defines 'struct tm' in
current systems. New programs need not use this macro.
-- Macro: AC_STRUCT_TIMEZONE
Figure out how to get the current timezone. If 'struct tm' has a
'tm_zone' member, define 'HAVE_STRUCT_TM_TM_ZONE' (and the
obsoleted 'HAVE_TM_ZONE'). Otherwise, if the external array
'tzname' is found, define 'HAVE_TZNAME'; if it is declared, define
'HAVE_DECL_TZNAME'.
File: autoconf.info, Node: Generic Structures, Prev: Particular Structures, Up: Structures
5.8.2 Generic Structure Checks
------------------------------
These macros are used to find structure members not covered by the
"particular" test macros.
-- Macro: AC_CHECK_MEMBER (AGGREGATE.MEMBER, [ACTION-IF-FOUND],
[ACTION-IF-NOT-FOUND], [INCLUDES = AC_INCLUDES_DEFAULT])
Check whether MEMBER is a member of the aggregate AGGREGATE. If no
INCLUDES are specified, the default includes are used (*note
Default Includes::).
AC_CHECK_MEMBER([struct passwd.pw_gecos], [],
[AC_MSG_ERROR([we need `passwd.pw_gecos'])],
[[#include <pwd.h>]])
You can use this macro for submembers:
AC_CHECK_MEMBER(struct top.middle.bot)
This macro caches its result in the 'ac_cv_member_AGGREGATE_MEMBER'
variable, with characters not suitable for a variable name mapped
to underscores.
-- Macro: AC_CHECK_MEMBERS (MEMBERS, [ACTION-IF-FOUND],
[ACTION-IF-NOT-FOUND], [INCLUDES = AC_INCLUDES_DEFAULT])
Check for the existence of each 'AGGREGATE.MEMBER' of MEMBERS using
the previous macro. When MEMBER belongs to AGGREGATE, define
'HAVE_AGGREGATE_MEMBER' (in all capitals, with spaces and dots
replaced by underscores). If ACTION-IF-FOUND is given, it is
executed for each of the found members. If ACTION-IF-NOT-FOUND is
given, it is executed for each of the members that could not be
found.
INCLUDES is a series of include directives, defaulting to
'AC_INCLUDES_DEFAULT' (*note Default Includes::), which are used
prior to the members under test.
This macro uses M4 lists:
AC_CHECK_MEMBERS([struct stat.st_rdev, struct stat.st_blksize])
File: autoconf.info, Node: Types, Next: Compilers and Preprocessors, Prev: Structures, Up: Existing Tests
5.9 Types
=========
The following macros check for C types, either builtin or typedefs. If
there is no macro specifically defined to check for a type you need, and
you don't need to check for any special properties of it, then you can
use a general type-check macro.
* Menu:
* Particular Types:: Special handling to find certain types
* Generic Types:: How to find other types
File: autoconf.info, Node: Particular Types, Next: Generic Types, Up: Types
5.9.1 Particular Type Checks
----------------------------
These macros check for particular C types in 'sys/types.h', 'stdlib.h',
'stdint.h', 'inttypes.h' and others, if they exist.
The Gnulib 'stdint' module is an alternate way to define many of
these symbols; it is useful if you prefer your code to assume a
C99-or-better environment. *Note Gnulib::.
-- Macro: AC_TYPE_GETGROUPS
Define 'GETGROUPS_T' to be whichever of 'gid_t' or 'int' is the
base type of the array argument to 'getgroups'.
This macro caches the base type in the 'ac_cv_type_getgroups'
variable.
-- Macro: AC_TYPE_INT8_T
If 'stdint.h' or 'inttypes.h' does not define the type 'int8_t',
define 'int8_t' to a signed integer type that is exactly 8 bits
wide and that uses two's complement representation, if such a type
exists. If you are worried about porting to hosts that lack such a
type, you can use the results of this macro in C89-or-later code as
follows:
#if HAVE_STDINT_H
# include <stdint.h>
#endif
#if defined INT8_MAX || defined int8_t
_code using int8_t_
#else
_complicated alternative using >8-bit 'signed char'_
#endif
This macro caches the type in the 'ac_cv_c_int8_t' variable.
-- Macro: AC_TYPE_INT16_T
This is like 'AC_TYPE_INT8_T', except for 16-bit integers.
-- Macro: AC_TYPE_INT32_T
This is like 'AC_TYPE_INT8_T', except for 32-bit integers.
-- Macro: AC_TYPE_INT64_T
This is like 'AC_TYPE_INT8_T', except for 64-bit integers.
-- Macro: AC_TYPE_INTMAX_T
If 'stdint.h' or 'inttypes.h' defines the type 'intmax_t', define
'HAVE_INTMAX_T'. Otherwise, define 'intmax_t' to the widest signed
integer type.
-- Macro: AC_TYPE_INTPTR_T
If 'stdint.h' or 'inttypes.h' defines the type 'intptr_t', define
'HAVE_INTPTR_T'. Otherwise, define 'intptr_t' to a signed integer
type wide enough to hold a pointer, if such a type exists.
-- Macro: AC_TYPE_LONG_DOUBLE
If the C compiler supports a working 'long double' type, define
'HAVE_LONG_DOUBLE'. The 'long double' type might have the same
range and precision as 'double'.
This macro caches its result in the 'ac_cv_type_long_double'
variable.
This macro is obsolescent, as current C compilers support 'long
double'. New programs need not use this macro.
-- Macro: AC_TYPE_LONG_DOUBLE_WIDER
If the C compiler supports a working 'long double' type with more
range or precision than the 'double' type, define
'HAVE_LONG_DOUBLE_WIDER'.
This macro caches its result in the 'ac_cv_type_long_double_wider'
variable.
-- Macro: AC_TYPE_LONG_LONG_INT
If the C compiler supports a working 'long long int' type, define
'HAVE_LONG_LONG_INT'. However, this test does not test 'long long
int' values in preprocessor '#if' expressions, because too many
compilers mishandle such expressions. *Note Preprocessor
Arithmetic::.
This macro caches its result in the 'ac_cv_type_long_long_int'
variable.
-- Macro: AC_TYPE_MBSTATE_T
Define 'HAVE_MBSTATE_T' if '<wchar.h>' declares the 'mbstate_t'
type. Also, define 'mbstate_t' to be a type if '<wchar.h>' does
not declare it.
This macro caches its result in the 'ac_cv_type_mbstate_t'
variable.
-- Macro: AC_TYPE_MODE_T
Define 'mode_t' to a suitable type, if standard headers do not
define it.
This macro caches its result in the 'ac_cv_type_mode_t' variable.
-- Macro: AC_TYPE_OFF_T
Define 'off_t' to a suitable type, if standard headers do not
define it.
This macro caches its result in the 'ac_cv_type_off_t' variable.
-- Macro: AC_TYPE_PID_T
Define 'pid_t' to a suitable type, if standard headers do not
define it.
This macro caches its result in the 'ac_cv_type_pid_t' variable.
-- Macro: AC_TYPE_SIZE_T
Define 'size_t' to a suitable type, if standard headers do not
define it.
This macro caches its result in the 'ac_cv_type_size_t' variable.
-- Macro: AC_TYPE_SSIZE_T
Define 'ssize_t' to a suitable type, if standard headers do not
define it.
This macro caches its result in the 'ac_cv_type_ssize_t' variable.
-- Macro: AC_TYPE_UID_T
Define 'uid_t' and 'gid_t' to suitable types, if standard headers
do not define them.
This macro caches its result in the 'ac_cv_type_uid_t' variable.
-- Macro: AC_TYPE_UINT8_T
If 'stdint.h' or 'inttypes.h' does not define the type 'uint8_t',
define 'uint8_t' to an unsigned integer type that is exactly 8 bits
wide, if such a type exists. This is like 'AC_TYPE_INT8_T', except
for unsigned integers.
-- Macro: AC_TYPE_UINT16_T
This is like 'AC_TYPE_UINT8_T', except for 16-bit integers.
-- Macro: AC_TYPE_UINT32_T
This is like 'AC_TYPE_UINT8_T', except for 32-bit integers.
-- Macro: AC_TYPE_UINT64_T
This is like 'AC_TYPE_UINT8_T', except for 64-bit integers.
-- Macro: AC_TYPE_UINTMAX_T
If 'stdint.h' or 'inttypes.h' defines the type 'uintmax_t', define
'HAVE_UINTMAX_T'. Otherwise, define 'uintmax_t' to the widest
unsigned integer type.
-- Macro: AC_TYPE_UINTPTR_T
If 'stdint.h' or 'inttypes.h' defines the type 'uintptr_t', define
'HAVE_UINTPTR_T'. Otherwise, define 'uintptr_t' to an unsigned
integer type wide enough to hold a pointer, if such a type exists.
-- Macro: AC_TYPE_UNSIGNED_LONG_LONG_INT
If the C compiler supports a working 'unsigned long long int' type,
define 'HAVE_UNSIGNED_LONG_LONG_INT'. However, this test does not
test 'unsigned long long int' values in preprocessor '#if'
expressions, because too many compilers mishandle such expressions.
*Note Preprocessor Arithmetic::.
This macro caches its result in the
'ac_cv_type_unsigned_long_long_int' variable.
File: autoconf.info, Node: Generic Types, Prev: Particular Types, Up: Types
5.9.2 Generic Type Checks
-------------------------
These macros are used to check for types not covered by the "particular"
test macros.
-- Macro: AC_CHECK_TYPE (TYPE, [ACTION-IF-FOUND],
[ACTION-IF-NOT-FOUND], [INCLUDES = AC_INCLUDES_DEFAULT])
Check whether TYPE is defined. It may be a compiler builtin type
or defined by the INCLUDES. INCLUDES is a series of include
directives, defaulting to 'AC_INCLUDES_DEFAULT' (*note Default
Includes::), which are used prior to the type under test.
In C, TYPE must be a type-name, so that the expression 'sizeof
(TYPE)' is valid (but 'sizeof ((TYPE))' is not). The same test is
applied when compiling for C++, which means that in C++ TYPE should
be a type-id and should not be an anonymous 'struct' or 'union'.
This macro caches its result in the 'ac_cv_type_TYPE' variable,
with '*' mapped to 'p' and other characters not suitable for a
variable name mapped to underscores.
-- Macro: AC_CHECK_TYPES (TYPES, [ACTION-IF-FOUND],
[ACTION-IF-NOT-FOUND], [INCLUDES = AC_INCLUDES_DEFAULT])
For each TYPE of the TYPES that is defined, define 'HAVE_TYPE' (in
all capitals). Each TYPE must follow the rules of 'AC_CHECK_TYPE'.
If no INCLUDES are specified, the default includes are used (*note
Default Includes::). If ACTION-IF-FOUND is given, it is additional
shell code to execute when one of the types is found. If
ACTION-IF-NOT-FOUND is given, it is executed when one of the types
is not found.
This macro uses M4 lists:
AC_CHECK_TYPES([ptrdiff_t])
AC_CHECK_TYPES([unsigned long long int, uintmax_t])
AC_CHECK_TYPES([float_t], [], [], [[#include <math.h>]])
Autoconf, up to 2.13, used to provide to another version of
'AC_CHECK_TYPE', broken by design. In order to keep backward
compatibility, a simple heuristic, quite safe but not totally, is
implemented. In case of doubt, read the documentation of the former
'AC_CHECK_TYPE', see *note Obsolete Macros::.
File: autoconf.info, Node: Compilers and Preprocessors, Next: System Services, Prev: Types, Up: Existing Tests
5.10 Compilers and Preprocessors
================================
All the tests for compilers ('AC_PROG_CC', 'AC_PROG_CXX', 'AC_PROG_F77')
define the output variable 'EXEEXT' based on the output of the compiler,
typically to the empty string if Posix and '.exe' if a DOS variant.
They also define the output variable 'OBJEXT' based on the output of
the compiler, after '.c' files have been excluded, typically to 'o' if
Posix, 'obj' if a DOS variant.
If the compiler being used does not produce executables, the tests
fail. If the executables can't be run, and cross-compilation is not
enabled, they fail too. *Note Manual Configuration::, for more on
support for cross compiling.
* Menu:
* Specific Compiler Characteristics:: Some portability issues
* Generic Compiler Characteristics:: Language independent tests and features
* C Compiler:: Checking its characteristics
* C++ Compiler:: Likewise
* Objective C Compiler:: Likewise
* Objective C++ Compiler:: Likewise
* Erlang Compiler and Interpreter:: Likewise
* Fortran Compiler:: Likewise
* Go Compiler:: Likewise
File: autoconf.info, Node: Specific Compiler Characteristics, Next: Generic Compiler Characteristics, Up: Compilers and Preprocessors
5.10.1 Specific Compiler Characteristics
----------------------------------------
Some compilers exhibit different behaviors.
Static/Dynamic Expressions
Autoconf relies on a trick to extract one bit of information from
the C compiler: using negative array sizes. For instance the
following excerpt of a C source demonstrates how to test whether
'int' objects are 4 bytes wide:
static int test_array[sizeof (int) == 4 ? 1 : -1];
To our knowledge, there is a single compiler that does not support
this trick: the HP C compilers (the real ones, not only the
"bundled") on HP-UX 11.00. They incorrectly reject the above
program with the diagnostic "Variable-length arrays cannot have
static storage." This bug comes from HP compilers' mishandling of
'sizeof (int)', not from the '? 1 : -1', and Autoconf works around
this problem by casting 'sizeof (int)' to 'long int' before
comparing it.
File: autoconf.info, Node: Generic Compiler Characteristics, Next: C Compiler, Prev: Specific Compiler Characteristics, Up: Compilers and Preprocessors
5.10.2 Generic Compiler Characteristics
---------------------------------------
-- Macro: AC_CHECK_SIZEOF (TYPE-OR-EXPR, [UNUSED], [INCLUDES =
AC_INCLUDES_DEFAULT])
Define 'SIZEOF_TYPE-OR-EXPR' (*note Standard Symbols::) to be the
size in bytes of TYPE-OR-EXPR, which may be either a type or an
expression returning a value that has a size. If the expression
'sizeof (TYPE-OR-EXPR)' is invalid, the result is 0. INCLUDES is a
series of include directives, defaulting to 'AC_INCLUDES_DEFAULT'
(*note Default Includes::), which are used prior to the expression
under test.
This macro now works even when cross-compiling. The UNUSED
argument was used when cross-compiling.
For example, the call
AC_CHECK_SIZEOF([int *])
defines 'SIZEOF_INT_P' to be 8 on DEC Alpha AXP systems.
This macro caches its result in the 'ac_cv_sizeof_TYPE-OR-EXPR'
variable, with '*' mapped to 'p' and other characters not suitable
for a variable name mapped to underscores.
-- Macro: AC_CHECK_ALIGNOF (TYPE, [INCLUDES = AC_INCLUDES_DEFAULT])
Define 'ALIGNOF_TYPE' (*note Standard Symbols::) to be the
alignment in bytes of TYPE. 'TYPE y;' must be valid as a structure
member declaration. If 'type' is unknown, the result is 0. If no
INCLUDES are specified, the default includes are used (*note
Default Includes::).
This macro caches its result in the 'ac_cv_alignof_TYPE-OR-EXPR'
variable, with '*' mapped to 'p' and other characters not suitable
for a variable name mapped to underscores.
-- Macro: AC_COMPUTE_INT (VAR, EXPRESSION, [INCLUDES =
AC_INCLUDES_DEFAULT], [ACTION-IF-FAILS])
Store into the shell variable VAR the value of the integer
EXPRESSION. The value should fit in an initializer in a C variable
of type 'signed long'. To support cross compilation (in which
case, the macro only works on hosts that use twos-complement
arithmetic), it should be possible to evaluate the expression at
compile-time. If no INCLUDES are specified, the default includes
are used (*note Default Includes::).
Execute ACTION-IF-FAILS if the value cannot be determined
correctly.
-- Macro: AC_LANG_WERROR
Normally Autoconf ignores warnings generated by the compiler,
linker, and preprocessor. If this macro is used, warnings count as
fatal errors for the current language. This macro is useful when
the results of configuration are used where warnings are
unacceptable; for instance, if parts of a program are built with
the GCC '-Werror' option. If the whole program is built using
'-Werror' it is often simpler to put '-Werror' in the compiler
flags ('CFLAGS', etc.).
-- Macro: AC_OPENMP
OpenMP (http://www.openmp.org/) specifies extensions of C, C++, and
Fortran that simplify optimization of shared memory parallelism,
which is a common problem on multicore CPUs.
If the current language is C, the macro 'AC_OPENMP' sets the
variable 'OPENMP_CFLAGS' to the C compiler flags needed for
supporting OpenMP. 'OPENMP_CFLAGS' is set to empty if the compiler
already supports OpenMP, if it has no way to activate OpenMP
support, or if the user rejects OpenMP support by invoking
'configure' with the '--disable-openmp' option.
'OPENMP_CFLAGS' needs to be used when compiling programs, when
preprocessing program source, and when linking programs. Therefore
you need to add '$(OPENMP_CFLAGS)' to the 'CFLAGS' of C programs
that use OpenMP. If you preprocess OpenMP-specific C code, you
also need to add '$(OPENMP_CFLAGS)' to 'CPPFLAGS'. The presence of
OpenMP support is revealed at compile time by the preprocessor
macro '_OPENMP'.
Linking a program with 'OPENMP_CFLAGS' typically adds one more
shared library to the program's dependencies, so its use is
recommended only on programs that actually require OpenMP.
If the current language is C++, 'AC_OPENMP' sets the variable
'OPENMP_CXXFLAGS', suitably for the C++ compiler. The same remarks
hold as for C.
If the current language is Fortran 77 or Fortran, 'AC_OPENMP' sets
the variable 'OPENMP_FFLAGS' or 'OPENMP_FCFLAGS', respectively.
Similar remarks as for C hold, except that 'CPPFLAGS' is not used
for Fortran, and no preprocessor macro signals OpenMP support.
For portability, it is best to avoid spaces between '#' and 'pragma
omp'. That is, write '#pragma omp', not '# pragma omp'. The Sun
WorkShop 6.2 C compiler chokes on the latter.
This macro caches its result in the 'ac_cv_prog_c_openmp',
'ac_cv_prog_cxx_openmp', 'ac_cv_prog_f77_openmp', or
'ac_cv_prog_fc_openmp' variable, depending on the current language.
File: autoconf.info, Node: C Compiler, Next: C++ Compiler, Prev: Generic Compiler Characteristics, Up: Compilers and Preprocessors
5.10.3 C Compiler Characteristics
---------------------------------
The following macros provide ways to find and exercise a C Compiler.
There are a few constructs that ought to be avoided, but do not deserve
being checked for, since they can easily be worked around.
Don't use lines containing solitary backslashes
They tickle a bug in the HP-UX C compiler (checked on HP-UX 10.20,
11.00, and 11i). When given the following source:
#ifdef __STDC__
/\
* A comment with backslash-newlines in it. %{ %} *\
\
/
char str[] = "\\
" A string with backslash-newlines in it %{ %} \\
"";
char apostrophe = '\\
\
'\
';
#endif
the compiler incorrectly fails with the diagnostics
"Non-terminating comment at end of file" and "Missing '#endif' at
end of file." Removing the lines with solitary backslashes solves
the problem.
Don't compile several files at once if output matters to you
Some compilers, such as HP's, report names of files being compiled
when given more than one file operand. For instance:
$ cc a.c b.c
a.c:
b.c:
This can cause problems if you observe the output of the compiler
to detect failures. Invoking 'cc -c a.c && cc -c b.c && cc -o c
a.o b.o' solves the issue.
Don't rely on '#error' failing
The IRIX C compiler does not fail when #error is preprocessed; it
simply emits a diagnostic and continues, exiting successfully. So,
instead of an error directive like '#error "Unsupported word size"'
it is more portable to use an invalid directive like '#Unsupported
word size' in Autoconf tests. In ordinary source code, '#error' is
OK, since installers with inadequate compilers like IRIX can simply
examine these compilers' diagnostic output.
Don't rely on correct '#line' support
On Solaris, 'c89' (at least Sun C 5.3 through 5.8) diagnoses
'#line' directives whose line numbers are greater than 32767.
Nothing in Posix makes this invalid. That is why Autoconf stopped
issuing '#line' directives.
-- Macro: AC_PROG_CC ([COMPILER-SEARCH-LIST])
Determine a C compiler to use. If 'CC' is not already set in the
environment, check for 'gcc' and 'cc', then for other C compilers.
Set output variable 'CC' to the name of the compiler found.
This macro may, however, be invoked with an optional first argument
which, if specified, must be a blank-separated list of C compilers
to search for. This just gives the user an opportunity to specify
an alternative search list for the C compiler. For example, if you
didn't like the default order, then you could invoke 'AC_PROG_CC'
like this:
AC_PROG_CC([gcc cl cc])
If the C compiler does not handle function prototypes correctly by
default, try to add an option to output variable 'CC' to make it
so. This macro tries various options that select
standard-conformance modes on various systems.
After calling this macro you can check whether the C compiler has
been set to accept ANSI C89 (ISO C90); if not, the shell variable
'ac_cv_prog_cc_c89' is set to 'no'. See also 'AC_C_PROTOTYPES'
below.
If using the GNU C compiler, set shell variable 'GCC' to 'yes'. If
output variable 'CFLAGS' was not already set, set it to '-g -O2'
for the GNU C compiler ('-O2' on systems where GCC does not accept
'-g'), or '-g' for other compilers. If your package does not like
this default, then it is acceptable to insert the line ':
${CFLAGS=""}' after 'AC_INIT' and before 'AC_PROG_CC' to select an
empty default instead.
Many Autoconf macros use a compiler, and thus call
'AC_REQUIRE([AC_PROG_CC])' to ensure that the compiler has been
determined before the body of the outermost 'AC_DEFUN' macro.
Although 'AC_PROG_CC' is safe to directly expand multiple times, it
performs certain checks (such as the proper value of 'EXEEXT') only
on the first invocation. Therefore, care must be used when
invoking this macro from within another macro rather than at the
top level (*note Expanded Before Required::).
-- Macro: AC_PROG_CC_C_O
If the C compiler does not accept the '-c' and '-o' options
simultaneously, define 'NO_MINUS_C_MINUS_O'. This macro actually
tests both the compiler found by 'AC_PROG_CC', and, if different,
the first 'cc' in the path. The test fails if one fails. This
macro was created for GNU Make to choose the default C compilation
rule.
For the compiler COMPILER, this macro caches its result in the
'ac_cv_prog_cc_COMPILER_c_o' variable.
-- Macro: AC_PROG_CPP
Set output variable 'CPP' to a command that runs the C
preprocessor. If '$CC -E' doesn't work, '/lib/cpp' is used. It is
only portable to run 'CPP' on files with a '.c' extension.
Some preprocessors don't indicate missing include files by the
error status. For such preprocessors an internal variable is set
that causes other macros to check the standard error from the
preprocessor and consider the test failed if any warnings have been
reported. For most preprocessors, though, warnings do not cause
include-file tests to fail unless 'AC_PROG_CPP_WERROR' is also
specified.
-- Macro: AC_PROG_CPP_WERROR
This acts like 'AC_PROG_CPP', except it treats warnings from the
preprocessor as errors even if the preprocessor exit status
indicates success. This is useful for avoiding headers that
generate mandatory warnings, such as deprecation notices.
The following macros check for C compiler or machine architecture
features. To check for characteristics not listed here, use
'AC_COMPILE_IFELSE' (*note Running the Compiler::) or 'AC_RUN_IFELSE'
(*note Runtime::).
-- Macro: AC_PROG_CC_STDC
If the C compiler cannot compile ISO Standard C (currently C99),
try to add an option to output variable 'CC' to make it work. If
the compiler does not support C99, fall back to supporting ANSI C89
(ISO C90).
After calling this macro you can check whether the C compiler has
been set to accept Standard C; if not, the shell variable
'ac_cv_prog_cc_stdc' is set to 'no'.
-- Macro: AC_PROG_CC_C89
If the C compiler is not in ANSI C89 (ISO C90) mode by default, try
to add an option to output variable 'CC' to make it so. This macro
tries various options that select ANSI C89 on some system or
another, preferring extended functionality modes over strict
conformance modes. It considers the compiler to be in ANSI C89
mode if it handles function prototypes correctly.
After calling this macro you can check whether the C compiler has
been set to accept ANSI C89; if not, the shell variable
'ac_cv_prog_cc_c89' is set to 'no'.
This macro is called automatically by 'AC_PROG_CC'.
-- Macro: AC_PROG_CC_C99
If the C compiler is not in C99 mode by default, try to add an
option to output variable 'CC' to make it so. This macro tries
various options that select C99 on some system or another,
preferring extended functionality modes over strict conformance
modes. It considers the compiler to be in C99 mode if it handles
'_Bool', '//' comments, flexible array members, 'inline', signed
and unsigned 'long long int', mixed code and declarations, named
initialization of structs, 'restrict', 'va_copy', varargs macros,
variable declarations in 'for' loops, and variable length arrays.
After calling this macro you can check whether the C compiler has
been set to accept C99; if not, the shell variable
'ac_cv_prog_cc_c99' is set to 'no'.
-- Macro: AC_C_BACKSLASH_A
Define 'HAVE_C_BACKSLASH_A' to 1 if the C compiler understands
'\a'.
This macro is obsolescent, as current C compilers understand '\a'.
New programs need not use this macro.
-- Macro: AC_C_BIGENDIAN ([ACTION-IF-TRUE], [ACTION-IF-FALSE],
[ACTION-IF-UNKNOWN], [ACTION-IF-UNIVERSAL])
If words are stored with the most significant byte first (like
Motorola and SPARC CPUs), execute ACTION-IF-TRUE. If words are
stored with the least significant byte first (like Intel and VAX
CPUs), execute ACTION-IF-FALSE.
This macro runs a test-case if endianness cannot be determined from
the system header files. When cross-compiling, the test-case is
not run but grep'ed for some magic values. ACTION-IF-UNKNOWN is
executed if the latter case fails to determine the byte sex of the
host system.
In some cases a single run of a compiler can generate code for
multiple architectures. This can happen, for example, when
generating Mac OS X universal binary files, which work on both
PowerPC and Intel architectures. In this case, the different
variants might be for different architectures whose endiannesses
differ. If 'configure' detects this, it executes
ACTION-IF-UNIVERSAL instead of ACTION-IF-UNKNOWN.
The default for ACTION-IF-TRUE is to define 'WORDS_BIGENDIAN'. The
default for ACTION-IF-FALSE is to do nothing. The default for
ACTION-IF-UNKNOWN is to abort configure and tell the installer how
to bypass this test. And finally, the default for
ACTION-IF-UNIVERSAL is to ensure that 'WORDS_BIGENDIAN' is defined
if and only if a universal build is detected and the current code
is big-endian; this default works only if 'autoheader' is used
(*note autoheader Invocation::).
If you use this macro without specifying ACTION-IF-UNIVERSAL, you
should also use 'AC_CONFIG_HEADERS'; otherwise 'WORDS_BIGENDIAN'
may be set incorrectly for Mac OS X universal binary files.
-- Macro: AC_C_CONST
If the C compiler does not fully support the 'const' keyword,
define 'const' to be empty. Some C compilers that do not define
'__STDC__' do support 'const'; some compilers that define
'__STDC__' do not completely support 'const'. Programs can simply
use 'const' as if every C compiler supported it; for those that
don't, the makefile or configuration header file defines it as
empty.
Occasionally installers use a C++ compiler to compile C code,
typically because they lack a C compiler. This causes problems
with 'const', because C and C++ treat 'const' differently. For
example:
const int foo;
is valid in C but not in C++. These differences unfortunately
cannot be papered over by defining 'const' to be empty.
If 'autoconf' detects this situation, it leaves 'const' alone, as
this generally yields better results in practice. However, using a
C++ compiler to compile C code is not recommended or supported, and
installers who run into trouble in this area should get a C
compiler like GCC to compile their C code.
This macro caches its result in the 'ac_cv_c_const' variable.
This macro is obsolescent, as current C compilers support 'const'.
New programs need not use this macro.
-- Macro: AC_C_RESTRICT
If the C compiler recognizes a variant spelling for the 'restrict'
keyword ('__restrict', '__restrict__', or '_Restrict'), then define
'restrict' to that; this is more likely to do the right thing with
compilers that support language variants where plain 'restrict' is
not a keyword. Otherwise, if the C compiler recognizes the
'restrict' keyword, don't do anything. Otherwise, define
'restrict' to be empty. Thus, programs may simply use 'restrict'
as if every C compiler supported it; for those that do not, the
makefile or configuration header defines it away.
Although support in C++ for the 'restrict' keyword is not required,
several C++ compilers do accept the keyword. This macro works for
them, too.
This macro caches 'no' in the 'ac_cv_c_restrict' variable if
'restrict' is not supported, and a supported spelling otherwise.
-- Macro: AC_C_VOLATILE
If the C compiler does not understand the keyword 'volatile',
define 'volatile' to be empty. Programs can simply use 'volatile'
as if every C compiler supported it; for those that do not, the
makefile or configuration header defines it as empty.
If the correctness of your program depends on the semantics of
'volatile', simply defining it to be empty does, in a sense, break
your code. However, given that the compiler does not support
'volatile', you are at its mercy anyway. At least your program
compiles, when it wouldn't before. *Note Volatile Objects::, for
more about 'volatile'.
In general, the 'volatile' keyword is a standard C feature, so you
might expect that 'volatile' is available only when '__STDC__' is
defined. However, Ultrix 4.3's native compiler does support
volatile, but does not define '__STDC__'.
This macro is obsolescent, as current C compilers support
'volatile'. New programs need not use this macro.
-- Macro: AC_C_INLINE
If the C compiler supports the keyword 'inline', do nothing.
Otherwise define 'inline' to '__inline__' or '__inline' if it
accepts one of those, otherwise define 'inline' to be empty.
-- Macro: AC_C_CHAR_UNSIGNED
If the C type 'char' is unsigned, define '__CHAR_UNSIGNED__',
unless the C compiler predefines it.
These days, using this macro is not necessary. The same
information can be determined by this portable alternative, thus
avoiding the use of preprocessor macros in the namespace reserved
for the implementation.
#include <limits.h>
#if CHAR_MIN == 0
# define CHAR_UNSIGNED 1
#endif
-- Macro: AC_C_STRINGIZE
If the C preprocessor supports the stringizing operator, define
'HAVE_STRINGIZE'. The stringizing operator is '#' and is found in
macros such as this:
#define x(y) #y
This macro is obsolescent, as current C compilers support the
stringizing operator. New programs need not use this macro.
-- Macro: AC_C_FLEXIBLE_ARRAY_MEMBER
If the C compiler supports flexible array members, define
'FLEXIBLE_ARRAY_MEMBER' to nothing; otherwise define it to 1. That
way, a declaration like this:
struct s
{
size_t n_vals;
double val[FLEXIBLE_ARRAY_MEMBER];
};
will let applications use the "struct hack" even with compilers
that do not support flexible array members. To allocate and use
such an object, you can use code like this:
size_t i;
size_t n = compute_value_count ();
struct s *p =
malloc (offsetof (struct s, val)
+ n * sizeof (double));
p->n_vals = n;
for (i = 0; i < n; i++)
p->val[i] = compute_value (i);
-- Macro: AC_C_VARARRAYS
If the C compiler supports variable-length arrays, define
'HAVE_C_VARARRAYS'. A variable-length array is an array of
automatic storage duration whose length is determined at run time,
when the array is declared.
-- Macro: AC_C_TYPEOF
If the C compiler supports GCC's 'typeof' syntax either directly or
through a different spelling of the keyword (e.g., '__typeof__'),
define 'HAVE_TYPEOF'. If the support is available only through a
different spelling, define 'typeof' to that spelling.
-- Macro: AC_C_PROTOTYPES
If function prototypes are understood by the compiler (as
determined by 'AC_PROG_CC'), define 'PROTOTYPES' and
'__PROTOTYPES'. Defining '__PROTOTYPES' is for the benefit of
header files that cannot use macros that infringe on user name
space.
This macro is obsolescent, as current C compilers support
prototypes. New programs need not use this macro.
-- Macro: AC_PROG_GCC_TRADITIONAL
Add '-traditional' to output variable 'CC' if using the GNU C
compiler and 'ioctl' does not work properly without '-traditional'.
That usually happens when the fixed header files have not been
installed on an old system.
This macro is obsolescent, since current versions of the GNU C
compiler fix the header files automatically when installed.
File: autoconf.info, Node: C++ Compiler, Next: Objective C Compiler, Prev: C Compiler, Up: Compilers and Preprocessors
5.10.4 C++ Compiler Characteristics
-----------------------------------
-- Macro: AC_PROG_CXX ([COMPILER-SEARCH-LIST])
Determine a C++ compiler to use. Check whether the environment
variable 'CXX' or 'CCC' (in that order) is set; if so, then set
output variable 'CXX' to its value.
Otherwise, if the macro is invoked without an argument, then search
for a C++ compiler under the likely names (first 'g++' and 'c++'
then other names). If none of those checks succeed, then as a last
resort set 'CXX' to 'g++'.
This macro may, however, be invoked with an optional first argument
which, if specified, must be a blank-separated list of C++
compilers to search for. This just gives the user an opportunity
to specify an alternative search list for the C++ compiler. For
example, if you didn't like the default order, then you could
invoke 'AC_PROG_CXX' like this:
AC_PROG_CXX([gcc cl KCC CC cxx cc++ xlC aCC c++ g++])
If using the GNU C++ compiler, set shell variable 'GXX' to 'yes'.
If output variable 'CXXFLAGS' was not already set, set it to '-g
-O2' for the GNU C++ compiler ('-O2' on systems where G++ does not
accept '-g'), or '-g' for other compilers. If your package does
not like this default, then it is acceptable to insert the line ':
${CXXFLAGS=""}' after 'AC_INIT' and before 'AC_PROG_CXX' to select
an empty default instead.
-- Macro: AC_PROG_CXXCPP
Set output variable 'CXXCPP' to a command that runs the C++
preprocessor. If '$CXX -E' doesn't work, '/lib/cpp' is used. It
is portable to run 'CXXCPP' only on files with a '.c', '.C', '.cc',
or '.cpp' extension.
Some preprocessors don't indicate missing include files by the
error status. For such preprocessors an internal variable is set
that causes other macros to check the standard error from the
preprocessor and consider the test failed if any warnings have been
reported. However, it is not known whether such broken
preprocessors exist for C++.
-- Macro: AC_PROG_CXX_C_O
Test whether the C++ compiler accepts the options '-c' and '-o'
simultaneously, and define 'CXX_NO_MINUS_C_MINUS_O', if it does
not.
File: autoconf.info, Node: Objective C Compiler, Next: Objective C++ Compiler, Prev: C++ Compiler, Up: Compilers and Preprocessors
5.10.5 Objective C Compiler Characteristics
-------------------------------------------
-- Macro: AC_PROG_OBJC ([COMPILER-SEARCH-LIST])
Determine an Objective C compiler to use. If 'OBJC' is not already
set in the environment, check for Objective C compilers. Set
output variable 'OBJC' to the name of the compiler found.
This macro may, however, be invoked with an optional first argument
which, if specified, must be a blank-separated list of Objective C
compilers to search for. This just gives the user an opportunity
to specify an alternative search list for the Objective C compiler.
For example, if you didn't like the default order, then you could
invoke 'AC_PROG_OBJC' like this:
AC_PROG_OBJC([gcc objcc objc])
If using the GNU Objective C compiler, set shell variable 'GOBJC'
to 'yes'. If output variable 'OBJCFLAGS' was not already set, set
it to '-g -O2' for the GNU Objective C compiler ('-O2' on systems
where 'gcc' does not accept '-g'), or '-g' for other compilers.
-- Macro: AC_PROG_OBJCPP
Set output variable 'OBJCPP' to a command that runs the Objective C
preprocessor. If '$OBJC -E' doesn't work, '/lib/cpp' is used.
File: autoconf.info, Node: Objective C++ Compiler, Next: Erlang Compiler and Interpreter, Prev: Objective C Compiler, Up: Compilers and Preprocessors
5.10.6 Objective C++ Compiler Characteristics
---------------------------------------------
-- Macro: AC_PROG_OBJCXX ([COMPILER-SEARCH-LIST])
Determine an Objective C++ compiler to use. If 'OBJCXX' is not
already set in the environment, check for Objective C++ compilers.
Set output variable 'OBJCXX' to the name of the compiler found.
This macro may, however, be invoked with an optional first argument
which, if specified, must be a blank-separated list of Objective
C++ compilers to search for. This just gives the user an
opportunity to specify an alternative search list for the Objective
C++ compiler. For example, if you didn't like the default order,
then you could invoke 'AC_PROG_OBJCXX' like this:
AC_PROG_OBJCXX([gcc g++ objcc++ objcxx])
If using the GNU Objective C++ compiler, set shell variable
'GOBJCXX' to 'yes'. If output variable 'OBJCXXFLAGS' was not
already set, set it to '-g -O2' for the GNU Objective C++ compiler
('-O2' on systems where 'gcc' does not accept '-g'), or '-g' for
other compilers.
-- Macro: AC_PROG_OBJCXXCPP
Set output variable 'OBJCXXCPP' to a command that runs the
Objective C++ preprocessor. If '$OBJCXX -E' doesn't work,
'/lib/cpp' is used.
File: autoconf.info, Node: Erlang Compiler and Interpreter, Next: Fortran Compiler, Prev: Objective C++ Compiler, Up: Compilers and Preprocessors
5.10.7 Erlang Compiler and Interpreter Characteristics
------------------------------------------------------
Autoconf defines the following macros for determining paths to the
essential Erlang/OTP programs:
-- Macro: AC_ERLANG_PATH_ERLC ([VALUE-IF-NOT-FOUND], [PATH = $PATH])
Determine an Erlang compiler to use. If 'ERLC' is not already set
in the environment, check for 'erlc'. Set output variable 'ERLC'
to the complete path of the compiler command found. In addition,
if 'ERLCFLAGS' is not set in the environment, set it to an empty
value.
The two optional arguments have the same meaning as the two last
arguments of macro 'AC_PATH_PROG' for looking for the 'erlc'
program. For example, to look for 'erlc' only in the
'/usr/lib/erlang/bin' directory:
AC_ERLANG_PATH_ERLC([not found], [/usr/lib/erlang/bin])
-- Macro: AC_ERLANG_NEED_ERLC ([PATH = $PATH])
A simplified variant of the 'AC_ERLANG_PATH_ERLC' macro, that
prints an error message and exits the 'configure' script if the
'erlc' program is not found.
-- Macro: AC_ERLANG_PATH_ERL ([VALUE-IF-NOT-FOUND], [PATH = $PATH])
Determine an Erlang interpreter to use. If 'ERL' is not already
set in the environment, check for 'erl'. Set output variable 'ERL'
to the complete path of the interpreter command found.
The two optional arguments have the same meaning as the two last
arguments of macro 'AC_PATH_PROG' for looking for the 'erl'
program. For example, to look for 'erl' only in the
'/usr/lib/erlang/bin' directory:
AC_ERLANG_PATH_ERL([not found], [/usr/lib/erlang/bin])
-- Macro: AC_ERLANG_NEED_ERL ([PATH = $PATH])
A simplified variant of the 'AC_ERLANG_PATH_ERL' macro, that prints
an error message and exits the 'configure' script if the 'erl'
program is not found.
File: autoconf.info, Node: Fortran Compiler, Next: Go Compiler, Prev: Erlang Compiler and Interpreter, Up: Compilers and Preprocessors
5.10.8 Fortran Compiler Characteristics
---------------------------------------
The Autoconf Fortran support is divided into two categories: legacy
Fortran 77 macros ('F77'), and modern Fortran macros ('FC'). The former
are intended for traditional Fortran 77 code, and have output variables
like 'F77', 'FFLAGS', and 'FLIBS'. The latter are for newer programs
that can (or must) compile under the newer Fortran standards, and have
output variables like 'FC', 'FCFLAGS', and 'FCLIBS'.
Except for the macros 'AC_FC_SRCEXT', 'AC_FC_FREEFORM',
'AC_FC_FIXEDFORM', and 'AC_FC_LINE_LENGTH' (see below), the 'FC' and
'F77' macros behave almost identically, and so they are documented
together in this section.
-- Macro: AC_PROG_F77 ([COMPILER-SEARCH-LIST])
Determine a Fortran 77 compiler to use. If 'F77' is not already
set in the environment, then check for 'g77' and 'f77', and then
some other names. Set the output variable 'F77' to the name of the
compiler found.
This macro may, however, be invoked with an optional first argument
which, if specified, must be a blank-separated list of Fortran 77
compilers to search for. This just gives the user an opportunity
to specify an alternative search list for the Fortran 77 compiler.
For example, if you didn't like the default order, then you could
invoke 'AC_PROG_F77' like this:
AC_PROG_F77([fl32 f77 fort77 xlf g77 f90 xlf90])
If using 'g77' (the GNU Fortran 77 compiler), then set the shell
variable 'G77' to 'yes'. If the output variable 'FFLAGS' was not
already set in the environment, then set it to '-g -02' for 'g77'
(or '-O2' where 'g77' does not accept '-g'). Otherwise, set
'FFLAGS' to '-g' for all other Fortran 77 compilers.
The result of the GNU test is cached in the
'ac_cv_f77_compiler_gnu' variable, acceptance of '-g' in the
'ac_cv_prog_f77_g' variable.
-- Macro: AC_PROG_FC ([COMPILER-SEARCH-LIST], [DIALECT])
Determine a Fortran compiler to use. If 'FC' is not already set in
the environment, then 'dialect' is a hint to indicate what Fortran
dialect to search for; the default is to search for the newest
available dialect. Set the output variable 'FC' to the name of the
compiler found.
By default, newer dialects are preferred over older dialects, but
if 'dialect' is specified then older dialects are preferred
starting with the specified dialect. 'dialect' can currently be
one of Fortran 77, Fortran 90, or Fortran 95. However, this is
only a hint of which compiler _name_ to prefer (e.g., 'f90' or
'f95'), and no attempt is made to guarantee that a particular
language standard is actually supported. Thus, it is preferable
that you avoid the 'dialect' option, and use AC_PROG_FC only for
code compatible with the latest Fortran standard.
This macro may, alternatively, be invoked with an optional first
argument which, if specified, must be a blank-separated list of
Fortran compilers to search for, just as in 'AC_PROG_F77'.
If using 'gfortran' or 'g77' (the GNU Fortran compilers), then set
the shell variable 'GFC' to 'yes'. If the output variable
'FCFLAGS' was not already set in the environment, then set it to
'-g -02' for GNU 'g77' (or '-O2' where 'g77' does not accept '-g').
Otherwise, set 'FCFLAGS' to '-g' for all other Fortran compilers.
The result of the GNU test is cached in the 'ac_cv_fc_compiler_gnu'
variable, acceptance of '-g' in the 'ac_cv_prog_fc_g' variable.
-- Macro: AC_PROG_F77_C_O
-- Macro: AC_PROG_FC_C_O
Test whether the Fortran compiler accepts the options '-c' and '-o'
simultaneously, and define 'F77_NO_MINUS_C_MINUS_O' or
'FC_NO_MINUS_C_MINUS_O', respectively, if it does not.
The result of the test is cached in the 'ac_cv_prog_f77_c_o' or
'ac_cv_prog_fc_c_o' variable, respectively.
The following macros check for Fortran compiler characteristics. To
check for characteristics not listed here, use 'AC_COMPILE_IFELSE'
(*note Running the Compiler::) or 'AC_RUN_IFELSE' (*note Runtime::),
making sure to first set the current language to Fortran 77 or Fortran
via 'AC_LANG([Fortran 77])' or 'AC_LANG(Fortran)' (*note Language
Choice::).
-- Macro: AC_F77_LIBRARY_LDFLAGS
-- Macro: AC_FC_LIBRARY_LDFLAGS
Determine the linker flags (e.g., '-L' and '-l') for the "Fortran
intrinsic and runtime libraries" that are required to successfully
link a Fortran program or shared library. The output variable
'FLIBS' or 'FCLIBS' is set to these flags (which should be included
after 'LIBS' when linking).
This macro is intended to be used in those situations when it is
necessary to mix, e.g., C++ and Fortran source code in a single
program or shared library (*note (automake)Mixing Fortran 77 With C
and C++::).
For example, if object files from a C++ and Fortran compiler must
be linked together, then the C++ compiler/linker must be used for
linking (since special C++-ish things need to happen at link time
like calling global constructors, instantiating templates, enabling
exception support, etc.).
However, the Fortran intrinsic and runtime libraries must be linked
in as well, but the C++ compiler/linker doesn't know by default how
to add these Fortran 77 libraries. Hence, this macro was created
to determine these Fortran libraries.
The macros 'AC_F77_DUMMY_MAIN' and 'AC_FC_DUMMY_MAIN' or
'AC_F77_MAIN' and 'AC_FC_MAIN' are probably also necessary to link
C/C++ with Fortran; see below. Further, it is highly recommended
that you use 'AC_CONFIG_HEADERS' (*note Configuration Headers::)
because the complex defines that the function wrapper macros create
may not work with C/C++ compiler drivers.
These macros internally compute the flag needed to verbose linking
output and cache it in 'ac_cv_prog_f77_v' or 'ac_cv_prog_fc_v'
variables, respectively. The computed linker flags are cached in
'ac_cv_f77_libs' or 'ac_cv_fc_libs', respectively.
-- Macro: AC_F77_DUMMY_MAIN ([ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND =
AC_MSG_FAILURE])
-- Macro: AC_FC_DUMMY_MAIN ([ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND =
AC_MSG_FAILURE])
With many compilers, the Fortran libraries detected by
'AC_F77_LIBRARY_LDFLAGS' or 'AC_FC_LIBRARY_LDFLAGS' provide their
own 'main' entry function that initializes things like Fortran I/O,
and which then calls a user-provided entry function named (say)
'MAIN__' to run the user's program. The 'AC_F77_DUMMY_MAIN' and
'AC_FC_DUMMY_MAIN' or 'AC_F77_MAIN' and 'AC_FC_MAIN' macros figure
out how to deal with this interaction.
When using Fortran for purely numerical functions (no I/O, etc.)
often one prefers to provide one's own 'main' and skip the Fortran
library initializations. In this case, however, one may still need
to provide a dummy 'MAIN__' routine in order to prevent linking
errors on some systems. 'AC_F77_DUMMY_MAIN' or 'AC_FC_DUMMY_MAIN'
detects whether any such routine is _required_ for linking, and
what its name is; the shell variable 'F77_DUMMY_MAIN' or
'FC_DUMMY_MAIN' holds this name, 'unknown' when no solution was
found, and 'none' when no such dummy main is needed.
By default, ACTION-IF-FOUND defines 'F77_DUMMY_MAIN' or
'FC_DUMMY_MAIN' to the name of this routine (e.g., 'MAIN__') _if_
it is required. ACTION-IF-NOT-FOUND defaults to exiting with an
error.
In order to link with Fortran routines, the user's C/C++ program
should then include the following code to define the dummy main if
it is needed:
#ifdef F77_DUMMY_MAIN
# ifdef __cplusplus
extern "C"
# endif
int F77_DUMMY_MAIN () { return 1; }
#endif
(Replace 'F77' with 'FC' for Fortran instead of Fortran 77.)
Note that this macro is called automatically from 'AC_F77_WRAPPERS'
or 'AC_FC_WRAPPERS'; there is generally no need to call it
explicitly unless one wants to change the default actions.
The result of this macro is cached in the 'ac_cv_f77_dummy_main' or
'ac_cv_fc_dummy_main' variable, respectively.
-- Macro: AC_F77_MAIN
-- Macro: AC_FC_MAIN
As discussed above, many Fortran libraries allow you to provide an
entry point called (say) 'MAIN__' instead of the usual 'main',
which is then called by a 'main' function in the Fortran libraries
that initializes things like Fortran I/O. The 'AC_F77_MAIN' and
'AC_FC_MAIN' macros detect whether it is _possible_ to utilize such
an alternate main function, and defines 'F77_MAIN' and 'FC_MAIN' to
the name of the function. (If no alternate main function name is
found, 'F77_MAIN' and 'FC_MAIN' are simply defined to 'main'.)
Thus, when calling Fortran routines from C that perform things like
I/O, one should use this macro and declare the "main" function like
so:
#ifdef __cplusplus
extern "C"
#endif
int F77_MAIN (int argc, char *argv[]);
(Again, replace 'F77' with 'FC' for Fortran instead of Fortran 77.)
The result of this macro is cached in the 'ac_cv_f77_main' or
'ac_cv_fc_main' variable, respectively.
-- Macro: AC_F77_WRAPPERS
-- Macro: AC_FC_WRAPPERS
Defines C macros 'F77_FUNC (name, NAME)', 'FC_FUNC (name, NAME)',
'F77_FUNC_(name, NAME)', and 'FC_FUNC_(name, NAME)' to properly
mangle the names of C/C++ identifiers, and identifiers with
underscores, respectively, so that they match the name-mangling
scheme used by the Fortran compiler.
Fortran is case-insensitive, and in order to achieve this the
Fortran compiler converts all identifiers into a canonical case and
format. To call a Fortran subroutine from C or to write a C
function that is callable from Fortran, the C program must
explicitly use identifiers in the format expected by the Fortran
compiler. In order to do this, one simply wraps all C identifiers
in one of the macros provided by 'AC_F77_WRAPPERS' or
'AC_FC_WRAPPERS'. For example, suppose you have the following
Fortran 77 subroutine:
subroutine foobar (x, y)
double precision x, y
y = 3.14159 * x
return
end
You would then declare its prototype in C or C++ as:
#define FOOBAR_F77 F77_FUNC (foobar, FOOBAR)
#ifdef __cplusplus
extern "C" /* prevent C++ name mangling */
#endif
void FOOBAR_F77 (double *x, double *y);
Note that we pass both the lowercase and uppercase versions of the
function name to 'F77_FUNC' so that it can select the right one.
Note also that all parameters to Fortran 77 routines are passed as
pointers (*note (automake)Mixing Fortran 77 With C and C++::).
(Replace 'F77' with 'FC' for Fortran instead of Fortran 77.)
Although Autoconf tries to be intelligent about detecting the
name-mangling scheme of the Fortran compiler, there may be Fortran
compilers that it doesn't support yet. In this case, the above
code generates a compile-time error, but some other behavior (e.g.,
disabling Fortran-related features) can be induced by checking
whether 'F77_FUNC' or 'FC_FUNC' is defined.
Now, to call that routine from a C program, we would do something
like:
{
double x = 2.7183, y;
FOOBAR_F77 (&x, &y);
}
If the Fortran identifier contains an underscore (e.g., 'foo_bar'),
you should use 'F77_FUNC_' or 'FC_FUNC_' instead of 'F77_FUNC' or
'FC_FUNC' (with the same arguments). This is because some Fortran
compilers mangle names differently if they contain an underscore.
The name mangling scheme is encoded in the 'ac_cv_f77_mangling' or
'ac_cv_fc_mangling' cache variable, respectively, and also used for
the 'AC_F77_FUNC' and 'AC_FC_FUNC' macros described below.
-- Macro: AC_F77_FUNC (NAME, [SHELLVAR])
-- Macro: AC_FC_FUNC (NAME, [SHELLVAR])
Given an identifier NAME, set the shell variable SHELLVAR to hold
the mangled version NAME according to the rules of the Fortran
linker (see also 'AC_F77_WRAPPERS' or 'AC_FC_WRAPPERS'). SHELLVAR
is optional; if it is not supplied, the shell variable is simply
NAME. The purpose of this macro is to give the caller a way to
access the name-mangling information other than through the C
preprocessor as above, for example, to call Fortran routines from
some language other than C/C++.
-- Macro: AC_FC_SRCEXT (EXT, [ACTION-IF-SUCCESS], [ACTION-IF-FAILURE =
AC_MSG_FAILURE])
-- Macro: AC_FC_PP_SRCEXT (EXT, [ACTION-IF-SUCCESS], [ACTION-IF-FAILURE
= AC_MSG_FAILURE])
By default, the 'FC' macros perform their tests using a '.f'
extension for source-code files. Some compilers, however, only
enable newer language features for appropriately named files, e.g.,
Fortran 90 features only for '.f90' files, or preprocessing only
with '.F' files or maybe other upper-case extensions. On the other
hand, some other compilers expect all source files to end in '.f'
and require special flags to support other file name extensions.
The 'AC_FC_SRCEXT' and 'AC_FC_PP_SRCEXT' macros deal with these
issues.
The 'AC_FC_SRCEXT' macro tries to get the 'FC' compiler to accept
files ending with the extension '.EXT' (i.e., EXT does _not_
contain the dot). If any special compiler flags are needed for
this, it stores them in the output variable 'FCFLAGS_EXT'. This
extension and these flags are then used for all subsequent 'FC'
tests (until 'AC_FC_SRCEXT' or 'AC_FC_PP_SRCEXT' is called another
time).
For example, you would use 'AC_FC_SRCEXT(f90)' to employ the '.f90'
extension in future tests, and it would set the 'FCFLAGS_f90'
output variable with any extra flags that are needed to compile
such files.
Similarly, the 'AC_FC_PP_SRCEXT' macro tries to get the 'FC'
compiler to preprocess and compile files with the extension '.EXT'.
When both 'fpp' and 'cpp' style preprocessing are provided, the
former is preferred, as the latter may treat continuation lines,
'//' tokens, and white space differently from what some Fortran
dialects expect. Conversely, if you do not want files to be
preprocessed, use only lower-case characters in the file name
extension. Like with 'AC_FC_SRCEXT(f90)', any needed flags are
stored in the 'FCFLAGS_EXT' variable.
The 'FCFLAGS_EXT' flags can _not_ be simply absorbed into
'FCFLAGS', for two reasons based on the limitations of some
compilers. First, only one 'FCFLAGS_EXT' can be used at a time, so
files with different extensions must be compiled separately.
Second, 'FCFLAGS_EXT' must appear _immediately_ before the
source-code file name when compiling. So, continuing the example
above, you might compile a 'foo.f90' file in your makefile with the
command:
foo.o: foo.f90
$(FC) -c $(FCFLAGS) $(FCFLAGS_f90) '$(srcdir)/foo.f90'
If 'AC_FC_SRCEXT' or 'AC_FC_PP_SRCEXT' succeeds in compiling files
with the EXT extension, it calls ACTION-IF-SUCCESS (defaults to
nothing). If it fails, and cannot find a way to make the 'FC'
compiler accept such files, it calls ACTION-IF-FAILURE (defaults to
exiting with an error message).
The 'AC_FC_SRCEXT' and 'AC_FC_PP_SRCEXT' macros cache their results
in 'ac_cv_fc_srcext_EXT' and 'ac_cv_fc_pp_srcext_EXT' variables,
respectively.
-- Macro: AC_FC_PP_DEFINE ([ACTION-IF-SUCCESS], [ACTION-IF-FAILURE =
AC_MSG_FAILURE])
Find a flag to specify defines for preprocessed Fortran. Not all
Fortran compilers use '-D'. Substitute 'FC_DEFINE' with the result
and call ACTION-IF-SUCCESS (defaults to nothing) if successful, and
ACTION-IF-FAILURE (defaults to failing with an error message) if
not.
This macro calls 'AC_FC_PP_SRCEXT([F])' in order to learn how to
preprocess a 'conftest.F' file, but restores a previously used
Fortran source file extension afterwards again.
The result of this test is cached in the 'ac_cv_fc_pp_define'
variable.
-- Macro: AC_FC_FREEFORM ([ACTION-IF-SUCCESS], [ACTION-IF-FAILURE =
AC_MSG_FAILURE])
Try to ensure that the Fortran compiler ('$FC') allows free-format
source code (as opposed to the older fixed-format style from
Fortran 77). If necessary, it may add some additional flags to
'FCFLAGS'.
This macro is most important if you are using the default '.f'
extension, since many compilers interpret this extension as
indicating fixed-format source unless an additional flag is
supplied. If you specify a different extension with
'AC_FC_SRCEXT', such as '.f90', then 'AC_FC_FREEFORM' ordinarily
succeeds without modifying 'FCFLAGS'. For extensions which the
compiler does not know about, the flag set by the 'AC_FC_SRCEXT'
macro might let the compiler assume Fortran 77 by default, however.
If 'AC_FC_FREEFORM' succeeds in compiling free-form source, it
calls ACTION-IF-SUCCESS (defaults to nothing). If it fails, it
calls ACTION-IF-FAILURE (defaults to exiting with an error
message).
The result of this test, or 'none' or 'unknown', is cached in the
'ac_cv_fc_freeform' variable.
-- Macro: AC_FC_FIXEDFORM ([ACTION-IF-SUCCESS], [ACTION-IF-FAILURE =
AC_MSG_FAILURE])
Try to ensure that the Fortran compiler ('$FC') allows the old
fixed-format source code (as opposed to free-format style). If
necessary, it may add some additional flags to 'FCFLAGS'.
This macro is needed for some compilers alias names like 'xlf95'
which assume free-form source code by default, and in case you want
to use fixed-form source with an extension like '.f90' which many
compilers interpret as free-form by default. If you specify a
different extension with 'AC_FC_SRCEXT', such as '.f', then
'AC_FC_FIXEDFORM' ordinarily succeeds without modifying 'FCFLAGS'.
If 'AC_FC_FIXEDFORM' succeeds in compiling fixed-form source, it
calls ACTION-IF-SUCCESS (defaults to nothing). If it fails, it
calls ACTION-IF-FAILURE (defaults to exiting with an error
message).
The result of this test, or 'none' or 'unknown', is cached in the
'ac_cv_fc_fixedform' variable.
-- Macro: AC_FC_LINE_LENGTH ([LENGTH], [ACTION-IF-SUCCESS],
[ACTION-IF-FAILURE = AC_MSG_FAILURE])
Try to ensure that the Fortran compiler ('$FC') accepts long source
code lines. The LENGTH argument may be given as 80, 132, or
unlimited, and defaults to 132. Note that line lengths above 254
columns are not portable, and some compilers do not accept more
than 132 columns at least for fixed format source. If necessary,
it may add some additional flags to 'FCFLAGS'.
If 'AC_FC_LINE_LENGTH' succeeds in compiling fixed-form source, it
calls ACTION-IF-SUCCESS (defaults to nothing). If it fails, it
calls ACTION-IF-FAILURE (defaults to exiting with an error
message).
The result of this test, or 'none' or 'unknown', is cached in the
'ac_cv_fc_line_length' variable.
-- Macro: AC_FC_CHECK_BOUNDS ([ACTION-IF-SUCCESS], [ACTION-IF-FAILURE =
AC_MSG_FAILURE])
The 'AC_FC_CHECK_BOUNDS' macro tries to enable array bounds
checking in the Fortran compiler. If successful, the
ACTION-IF-SUCCESS is called and any needed flags are added to
'FCFLAGS'. Otherwise, ACTION-IF-FAILURE is called, which defaults
to failing with an error message. The macro currently requires
Fortran 90 or a newer dialect.
The result of the macro is cached in the 'ac_cv_fc_check_bounds'
variable.
-- Macro: AC_F77_IMPLICIT_NONE ([ACTION-IF-SUCCESS], [ACTION-IF-FAILURE
= AC_MSG_FAILURE])
-- Macro: AC_FC_IMPLICIT_NONE ([ACTION-IF-SUCCESS], [ACTION-IF-FAILURE
= AC_MSG_FAILURE])
Try to disallow implicit declarations in the Fortran compiler. If
successful, ACTION-IF-SUCCESS is called and any needed flags are
added to 'FFLAGS' or 'FCFLAGS', respectively. Otherwise,
ACTION-IF-FAILURE is called, which defaults to failing with an
error message.
The result of these macros are cached in the
'ac_cv_f77_implicit_none' and 'ac_cv_fc_implicit_none' variables,
respectively.
-- Macro: AC_FC_MODULE_EXTENSION
Find the Fortran 90 module file name extension. Most Fortran 90
compilers store module information in files separate from the
object files. The module files are usually named after the name of
the module rather than the source file name, with characters
possibly turned to upper case, plus an extension, often '.mod'.
Not all compilers use module files at all, or by default. The Cray
Fortran compiler requires '-e m' in order to store and search
module information in '.mod' files rather than in object files.
Likewise, the Fujitsu Fortran compilers uses the '-Am' option to
indicate how module information is stored.
The 'AC_FC_MODULE_EXTENSION' macro computes the module extension
without the leading dot, and stores that in the 'FC_MODEXT'
variable. If the compiler does not produce module files, or the
extension cannot be determined, 'FC_MODEXT' is empty. Typically,
the result of this macro may be used in cleanup 'make' rules as
follows:
clean-modules:
-test -z "$(FC_MODEXT)" || rm -f *.$(FC_MODEXT)
The extension, or 'unknown', is cached in the 'ac_cv_fc_module_ext'
variable.
-- Macro: AC_FC_MODULE_FLAG ([ACTION-IF-SUCCESS], [ACTION-IF-FAILURE =
AC_MSG_FAILURE])
Find the compiler flag to include Fortran 90 module information
from another directory, and store that in the 'FC_MODINC' variable.
Call ACTION-IF-SUCCESS (defaults to nothing) if successful, and set
'FC_MODINC' to empty and call ACTION-IF-FAILURE (defaults to
exiting with an error message) if not.
Most Fortran 90 compilers provide a way to specify module
directories. Some have separate flags for the directory to write
module files to, and directories to search them in, whereas others
only allow writing to the current directory or to the first
directory specified in the include path. Further, with some
compilers, the module search path and the preprocessor search path
can only be modified with the same flag. Thus, for portability,
write module files to the current directory only and list that as
first directory in the search path.
There may be no whitespace between 'FC_MODINC' and the following
directory name, but 'FC_MODINC' may contain trailing white space.
For example, if you use Automake and would like to search '../lib'
for module files, you can use the following:
AM_FCFLAGS = $(FC_MODINC). $(FC_MODINC)../lib
Inside 'configure' tests, you can use:
if test -n "$FC_MODINC"; then
FCFLAGS="$FCFLAGS $FC_MODINC. $FC_MODINC../lib"
fi
The flag is cached in the 'ac_cv_fc_module_flag' variable. The
substituted value of 'FC_MODINC' may refer to the 'ac_empty' dummy
placeholder empty variable, to avoid losing the significant
trailing whitespace in a 'Makefile'.
-- Macro: AC_FC_MODULE_OUTPUT_FLAG ([ACTION-IF-SUCCESS],
[ACTION-IF-FAILURE = AC_MSG_FAILURE])
Find the compiler flag to write Fortran 90 module information to
another directory, and store that in the 'FC_MODOUT' variable.
Call ACTION-IF-SUCCESS (defaults to nothing) if successful, and set
'FC_MODOUT' to empty and call ACTION-IF-FAILURE (defaults to
exiting with an error message) if not.
Not all Fortran 90 compilers write module files, and of those that
do, not all allow writing to a directory other than the current
one, nor do all have separate flags for writing and reading; see
the description of 'AC_FC_MODULE_FLAG' above. If you need to be
able to write to another directory, for maximum portability use
'FC_MODOUT' before any 'FC_MODINC' and include both the current
directory and the one you write to in the search path:
AM_FCFLAGS = $(FC_MODOUT)../mod $(FC_MODINC)../mod $(FC_MODINC). ...
The flag is cached in the 'ac_cv_fc_module_output_flag' variable.
The substituted value of 'FC_MODOUT' may refer to the 'ac_empty'
dummy placeholder empty variable, to avoid losing the significant
trailing whitespace in a 'Makefile'.
File: autoconf.info, Node: Go Compiler, Prev: Fortran Compiler, Up: Compilers and Preprocessors
5.10.9 Go Compiler Characteristics
----------------------------------
Autoconf provides basic support for the Go programming language when
using the 'gccgo' compiler (there is currently no support for the '6g'
and '8g' compilers).
-- Macro: AC_PROG_GO ([COMPILER-SEARCH-LIST])
Find the Go compiler to use. Check whether the environment
variable 'GOC' is set; if so, then set output variable 'GOC' to its
value.
Otherwise, if the macro is invoked without an argument, then search
for a Go compiler named 'gccgo'. If it is not found, then as a
last resort set 'GOC' to 'gccgo'.
This macro may be invoked with an optional first argument which, if
specified, must be a blank-separated list of Go compilers to search
for.
If output variable 'GOFLAGS' was not already set, set it to '-g
-O2'. If your package does not like this default, 'GOFLAGS' may be
set before 'AC_PROG_GO'.
File: autoconf.info, Node: System Services, Next: Posix Variants, Prev: Compilers and Preprocessors, Up: Existing Tests
5.11 System Services
====================
The following macros check for operating system services or
capabilities.
-- Macro: AC_PATH_X
Try to locate the X Window System include files and libraries. If
the user gave the command line options '--x-includes=DIR' and
'--x-libraries=DIR', use those directories.
If either or both were not given, get the missing values by running
'xmkmf' (or an executable pointed to by the 'XMKMF' environment
variable) on a trivial 'Imakefile' and examining the makefile that
it produces. Setting 'XMKMF' to 'false' disables this method.
If this method fails to find the X Window System, 'configure' looks
for the files in several directories where they often reside. If
either method is successful, set the shell variables 'x_includes'
and 'x_libraries' to their locations, unless they are in
directories the compiler searches by default.
If both methods fail, or the user gave the command line option
'--without-x', set the shell variable 'no_x' to 'yes'; otherwise
set it to the empty string.
-- Macro: AC_PATH_XTRA
An enhanced version of 'AC_PATH_X'. It adds the C compiler flags
that X needs to output variable 'X_CFLAGS', and the X linker flags
to 'X_LIBS'. Define 'X_DISPLAY_MISSING' if X is not available.
This macro also checks for special libraries that some systems need
in order to compile X programs. It adds any that the system needs
to output variable 'X_EXTRA_LIBS'. And it checks for special X11R6
libraries that need to be linked with before '-lX11', and adds any
found to the output variable 'X_PRE_LIBS'.
-- Macro: AC_SYS_INTERPRETER
Check whether the system supports starting scripts with a line of
the form '#!/bin/sh' to select the interpreter to use for the
script. After running this macro, shell code in 'configure.ac' can
check the shell variable 'interpval'; it is set to 'yes' if the
system supports '#!', 'no' if not.
-- Macro: AC_SYS_LARGEFILE
Arrange for 64-bit file offsets, known as large-file support
(http://www.unix-systems.org/version2/whatsnew/lfs20mar.html). On
some hosts, one must use special compiler options to build programs
that can access large files. Append any such options to the output
variable 'CC'. Define '_FILE_OFFSET_BITS' and '_LARGE_FILES' if
necessary.
Large-file support can be disabled by configuring with the
'--disable-largefile' option.
If you use this macro, check that your program works even when
'off_t' is wider than 'long int', since this is common when
large-file support is enabled. For example, it is not correct to
print an arbitrary 'off_t' value 'X' with 'printf ("%ld", (long
int) X)'.
The LFS introduced the 'fseeko' and 'ftello' functions to replace
their C counterparts 'fseek' and 'ftell' that do not use 'off_t'.
Take care to use 'AC_FUNC_FSEEKO' to make their prototypes
available when using them and large-file support is enabled.
-- Macro: AC_SYS_LONG_FILE_NAMES
If the system supports file names longer than 14 characters, define
'HAVE_LONG_FILE_NAMES'.
-- Macro: AC_SYS_POSIX_TERMIOS
Check to see if the Posix termios headers and functions are
available on the system. If so, set the shell variable
'ac_cv_sys_posix_termios' to 'yes'. If not, set the variable to
'no'.
File: autoconf.info, Node: Posix Variants, Next: Erlang Libraries, Prev: System Services, Up: Existing Tests
5.12 Posix Variants
===================
The following macro makes it possible to use features of Posix that are
extensions to C, as well as platform extensions not defined by Posix.
-- Macro: AC_USE_SYSTEM_EXTENSIONS
This macro was introduced in Autoconf 2.60. If possible, enable
extensions to C or Posix on hosts that normally disable the
extensions, typically due to standards-conformance namespace
issues. This should be called before any macros that run the C
compiler. The following preprocessor macros are defined where
appropriate:
'_GNU_SOURCE'
Enable extensions on GNU/Linux.
'__EXTENSIONS__'
Enable general extensions on Solaris.
'_POSIX_PTHREAD_SEMANTICS'
Enable threading extensions on Solaris.
'_TANDEM_SOURCE'
Enable extensions for the HP NonStop platform.
'_ALL_SOURCE'
Enable extensions for AIX 3, and for Interix.
'_POSIX_SOURCE'
Enable Posix functions for Minix.
'_POSIX_1_SOURCE'
Enable additional Posix functions for Minix.
'_MINIX'
Identify Minix platform. This particular preprocessor macro
is obsolescent, and may be removed in a future release of
Autoconf.
File: autoconf.info, Node: Erlang Libraries, Prev: Posix Variants, Up: Existing Tests
5.13 Erlang Libraries
=====================
The following macros check for an installation of Erlang/OTP, and for
the presence of certain Erlang libraries. All those macros require the
configuration of an Erlang interpreter and an Erlang compiler (*note
Erlang Compiler and Interpreter::).
-- Macro: AC_ERLANG_SUBST_ERTS_VER
Set the output variable 'ERLANG_ERTS_VER' to the version of the
Erlang runtime system (as returned by Erlang's
'erlang:system_info(version)' function). The result of this test
is cached if caching is enabled when running 'configure'. The
'ERLANG_ERTS_VER' variable is not intended to be used for testing
for features of specific ERTS versions, but to be used for
substituting the ERTS version in Erlang/OTP release resource files
('.rel' files), as shown below.
-- Macro: AC_ERLANG_SUBST_ROOT_DIR
Set the output variable 'ERLANG_ROOT_DIR' to the path to the base
directory in which Erlang/OTP is installed (as returned by Erlang's
'code:root_dir/0' function). The result of this test is cached if
caching is enabled when running 'configure'.
-- Macro: AC_ERLANG_SUBST_LIB_DIR
Set the output variable 'ERLANG_LIB_DIR' to the path of the library
directory of Erlang/OTP (as returned by Erlang's 'code:lib_dir/0'
function), which subdirectories each contain an installed
Erlang/OTP library. The result of this test is cached if caching
is enabled when running 'configure'.
-- Macro: AC_ERLANG_CHECK_LIB (LIBRARY, [ACTION-IF-FOUND],
[ACTION-IF-NOT-FOUND])
Test whether the Erlang/OTP library LIBRARY is installed by calling
Erlang's 'code:lib_dir/1' function. The result of this test is
cached if caching is enabled when running 'configure'.
ACTION-IF-FOUND is a list of shell commands to run if the library
is installed; ACTION-IF-NOT-FOUND is a list of shell commands to
run if it is not. Additionally, if the library is installed, the
output variable 'ERLANG_LIB_DIR_LIBRARY' is set to the path to the
library installation directory, and the output variable
'ERLANG_LIB_VER_LIBRARY' is set to the version number that is part
of the subdirectory name, if it is in the standard form
('LIBRARY-VERSION'). If the directory name does not have a version
part, 'ERLANG_LIB_VER_LIBRARY' is set to the empty string. If the
library is not installed, 'ERLANG_LIB_DIR_LIBRARY' and
'ERLANG_LIB_VER_LIBRARY' are set to '"not found"'. For example, to
check if library 'stdlib' is installed:
AC_ERLANG_CHECK_LIB([stdlib],
[echo "stdlib version \"$ERLANG_LIB_VER_stdlib\""
echo "is installed in \"$ERLANG_LIB_DIR_stdlib\""],
[AC_MSG_ERROR([stdlib was not found!])])
The 'ERLANG_LIB_VER_LIBRARY' variables (set by
'AC_ERLANG_CHECK_LIB') and the 'ERLANG_ERTS_VER' variable (set by
'AC_ERLANG_SUBST_ERTS_VER') are not intended to be used for testing
for features of specific versions of libraries or of the Erlang
runtime system. Those variables are intended to be substituted in
Erlang release resource files ('.rel' files). For instance, to
generate a 'example.rel' file for an application depending on the
'stdlib' library, 'configure.ac' could contain:
AC_ERLANG_SUBST_ERTS_VER
AC_ERLANG_CHECK_LIB([stdlib],
[],
[AC_MSG_ERROR([stdlib was not found!])])
AC_CONFIG_FILES([example.rel])
The 'example.rel.in' file used to generate 'example.rel' should
contain:
{release,
{"@PACKAGE@", "@VERSION@"},
{erts, "@ERLANG_ERTS_VER@"},
[{stdlib, "@ERLANG_LIB_VER_stdlib@"},
{@PACKAGE@, "@VERSION@"}]}.
In addition to the above macros, which test installed Erlang
libraries, the following macros determine the paths to the directories
into which newly built Erlang libraries are to be installed:
-- Macro: AC_ERLANG_SUBST_INSTALL_LIB_DIR
Set the 'ERLANG_INSTALL_LIB_DIR' output variable to the directory
into which every built Erlang library should be installed in a
separate subdirectory. If this variable is not set in the
environment when 'configure' runs, its default value is
'${libdir}/erlang/lib'.
-- Macro: AC_ERLANG_SUBST_INSTALL_LIB_SUBDIR (LIBRARY, VERSION)
Set the 'ERLANG_INSTALL_LIB_DIR_LIBRARY' output variable to the
directory into which the built Erlang library LIBRARY version
VERSION should be installed. If this variable is not set in the
environment when 'configure' runs, its default value is
'$ERLANG_INSTALL_LIB_DIR/LIBRARY-VERSION', the value of the
'ERLANG_INSTALL_LIB_DIR' variable being set by the
'AC_ERLANG_SUBST_INSTALL_LIB_DIR' macro.
File: autoconf.info, Node: Writing Tests, Next: Results, Prev: Existing Tests, Up: Top
6 Writing Tests
***************
If the existing feature tests don't do something you need, you have to
write new ones. These macros are the building blocks. They provide
ways for other macros to check whether various kinds of features are
available and report the results.
This chapter contains some suggestions and some of the reasons why
the existing tests are written the way they are. You can also learn a
lot about how to write Autoconf tests by looking at the existing ones.
If something goes wrong in one or more of the Autoconf tests, this
information can help you understand the assumptions behind them, which
might help you figure out how to best solve the problem.
These macros check the output of the compiler system of the current
language (*note Language Choice::). They do not cache the results of
their tests for future use (*note Caching Results::), because they don't
know enough about the information they are checking for to generate a
cache variable name. They also do not print any messages, for the same
reason. The checks for particular kinds of features call these macros
and do cache their results and print messages about what they're
checking for.
When you write a feature test that could be applicable to more than
one software package, the best thing to do is encapsulate it in a new
macro. *Note Writing Autoconf Macros::, for how to do that.
* Menu:
* Language Choice:: Selecting which language to use for testing
* Writing Test Programs:: Forging source files for compilers
* Running the Preprocessor:: Detecting preprocessor symbols
* Running the Compiler:: Detecting language or header features
* Running the Linker:: Detecting library features
* Runtime:: Testing for runtime features
* Systemology:: A zoology of operating systems
* Multiple Cases:: Tests for several possible values
File: autoconf.info, Node: Language Choice, Next: Writing Test Programs, Up: Writing Tests
6.1 Language Choice
===================
Autoconf-generated 'configure' scripts check for the C compiler and its
features by default. Packages that use other programming languages
(maybe more than one, e.g., C and C++) need to test features of the
compilers for the respective languages. The following macros determine
which programming language is used in the subsequent tests in
'configure.ac'.
-- Macro: AC_LANG (LANGUAGE)
Do compilation tests using the compiler, preprocessor, and file
extensions for the specified LANGUAGE.
Supported languages are:
'C'
Do compilation tests using 'CC' and 'CPP' and use extension
'.c' for test programs. Use compilation flags: 'CPPFLAGS'
with 'CPP', and both 'CPPFLAGS' and 'CFLAGS' with 'CC'.
'C++'
Do compilation tests using 'CXX' and 'CXXCPP' and use
extension '.C' for test programs. Use compilation flags:
'CPPFLAGS' with 'CXXCPP', and both 'CPPFLAGS' and 'CXXFLAGS'
with 'CXX'.
'Fortran 77'
Do compilation tests using 'F77' and use extension '.f' for
test programs. Use compilation flags: 'FFLAGS'.
'Fortran'
Do compilation tests using 'FC' and use extension '.f' (or
whatever has been set by 'AC_FC_SRCEXT') for test programs.
Use compilation flags: 'FCFLAGS'.
'Erlang'
Compile and execute tests using 'ERLC' and 'ERL' and use
extension '.erl' for test Erlang modules. Use compilation
flags: 'ERLCFLAGS'.
'Objective C'
Do compilation tests using 'OBJC' and 'OBJCPP' and use
extension '.m' for test programs. Use compilation flags:
'CPPFLAGS' with 'OBJCPP', and both 'CPPFLAGS' and 'OBJCFLAGS'
with 'OBJC'.
'Objective C++'
Do compilation tests using 'OBJCXX' and 'OBJCXXCPP' and use
extension '.mm' for test programs. Use compilation flags:
'CPPFLAGS' with 'OBJCXXCPP', and both 'CPPFLAGS' and
'OBJCXXFLAGS' with 'OBJCXX'.
'Go'
Do compilation tests using 'GOC' and use extension '.go' for
test programs. Use compilation flags 'GOFLAGS'.
-- Macro: AC_LANG_PUSH (LANGUAGE)
Remember the current language (as set by 'AC_LANG') on a stack, and
then select the LANGUAGE. Use this macro and 'AC_LANG_POP' in
macros that need to temporarily switch to a particular language.
-- Macro: AC_LANG_POP ([LANGUAGE])
Select the language that is saved on the top of the stack, as set
by 'AC_LANG_PUSH', and remove it from the stack.
If given, LANGUAGE specifies the language we just _quit_. It is a
good idea to specify it when it's known (which should be the
case...), since Autoconf detects inconsistencies.
AC_LANG_PUSH([Fortran 77])
# Perform some tests on Fortran 77.
# ...
AC_LANG_POP([Fortran 77])
-- Macro: AC_LANG_ASSERT (LANGUAGE)
Check statically that the current language is LANGUAGE. You should
use this in your language specific macros to avoid that they be
called with an inappropriate language.
This macro runs only at 'autoconf' time, and incurs no cost at
'configure' time. Sadly enough and because Autoconf is a two layer
language (1), the macros 'AC_LANG_PUSH' and 'AC_LANG_POP' cannot be
"optimizing", therefore as much as possible you ought to avoid
using them to wrap your code, rather, require from the user to run
the macro with a correct current language, and check it with
'AC_LANG_ASSERT'. And anyway, that may help the user understand
she is running a Fortran macro while expecting a result about her
Fortran 77 compiler...
-- Macro: AC_REQUIRE_CPP
Ensure that whichever preprocessor would currently be used for
tests has been found. Calls 'AC_REQUIRE' (*note Prerequisite
Macros::) with an argument of either 'AC_PROG_CPP' or
'AC_PROG_CXXCPP', depending on which language is current.
---------- Footnotes ----------
(1) Because M4 is not aware of Sh code, especially conditionals, some
optimizations that look nice statically may produce incorrect results at
runtime.
File: autoconf.info, Node: Writing Test Programs, Next: Running the Preprocessor, Prev: Language Choice, Up: Writing Tests
6.2 Writing Test Programs
=========================
Autoconf tests follow a common scheme: feed some program with some
input, and most of the time, feed a compiler with some source file.
This section is dedicated to these source samples.
* Menu:
* Guidelines:: General rules for writing test programs
* Test Functions:: Avoiding pitfalls in test programs
* Generating Sources:: Source program boilerplate
File: autoconf.info, Node: Guidelines, Next: Test Functions, Up: Writing Test Programs
6.2.1 Guidelines for Test Programs
----------------------------------
The most important rule to follow when writing testing samples is:
_Look for realism._
This motto means that testing samples must be written with the same
strictness as real programs are written. In particular, you should
avoid "shortcuts" and simplifications.
Don't just play with the preprocessor if you want to prepare a
compilation. For instance, using 'cpp' to check whether a header is
functional might let your 'configure' accept a header which causes some
_compiler_ error. Do not hesitate to check a header with other headers
included before, especially required headers.
Make sure the symbols you use are properly defined, i.e., refrain
from simply declaring a function yourself instead of including the
proper header.
Test programs should not write to standard output. They should exit
with status 0 if the test succeeds, and with status 1 otherwise, so that
success can be distinguished easily from a core dump or other failure;
segmentation violations and other failures produce a nonzero exit
status. Unless you arrange for 'exit' to be declared, test programs
should 'return', not 'exit', from 'main', because on many systems 'exit'
is not declared by default.
Test programs can use '#if' or '#ifdef' to check the values of
preprocessor macros defined by tests that have already run. For
example, if you call 'AC_HEADER_STDBOOL', then later on in
'configure.ac' you can have a test program that includes 'stdbool.h'
conditionally:
#ifdef HAVE_STDBOOL_H
# include <stdbool.h>
#endif
Both '#if HAVE_STDBOOL_H' and '#ifdef HAVE_STDBOOL_H' will work with
any standard C compiler. Some developers prefer '#if' because it is
easier to read, while others prefer '#ifdef' because it avoids
diagnostics with picky compilers like GCC with the '-Wundef' option.
If a test program needs to use or create a data file, give it a name
that starts with 'conftest', such as 'conftest.data'. The 'configure'
script cleans up by running 'rm -f -r conftest*' after running test
programs and if the script is interrupted.
File: autoconf.info, Node: Test Functions, Next: Generating Sources, Prev: Guidelines, Up: Writing Test Programs
6.2.2 Test Functions
--------------------
These days it's safe to assume support for function prototypes
(introduced in C89).
Functions that test programs declare should also be conditionalized
for C++, which requires 'extern "C"' prototypes. Make sure to not
include any header files containing clashing prototypes.
#ifdef __cplusplus
extern "C"
#endif
void *valloc (size_t);
If a test program calls a function with invalid parameters (just to
see whether it exists), organize the program to ensure that it never
invokes that function. You can do this by calling it in another
function that is never invoked. You can't do it by putting it after a
call to 'exit', because GCC version 2 knows that 'exit' never returns
and optimizes out any code that follows it in the same block.
If you include any header files, be sure to call the functions
relevant to them with the correct number of arguments, even if they are
just 0, to avoid compilation errors due to prototypes. GCC version 2
has internal prototypes for several functions that it automatically
inlines; for example, 'memcpy'. To avoid errors when checking for them,
either pass them the correct number of arguments or redeclare them with
a different return type (such as 'char').
File: autoconf.info, Node: Generating Sources, Prev: Test Functions, Up: Writing Test Programs
6.2.3 Generating Sources
------------------------
Autoconf provides a set of macros that can be used to generate test
source files. They are written to be language generic, i.e., they
actually depend on the current language (*note Language Choice::) to
"format" the output properly.
-- Macro: AC_LANG_CONFTEST (SOURCE)
Save the SOURCE text in the current test source file:
'conftest.EXTENSION' where the EXTENSION depends on the current
language. As of Autoconf 2.63b, the source file also contains the
results of all of the 'AC_DEFINE' performed so far.
Note that the SOURCE is evaluated exactly once, like regular
Autoconf macro arguments, and therefore (i) you may pass a macro
invocation, (ii) if not, be sure to double quote if needed.
This macro issues a warning during 'autoconf' processing if SOURCE
does not include an expansion of the macro
'AC_LANG_DEFINES_PROVIDED' (note that both 'AC_LANG_SOURCE' and
'AC_LANG_PROGRAM' call this macro, and thus avoid the warning).
This macro is seldom called directly, but is used under the hood by
more common macros such as 'AC_COMPILE_IFELSE' and 'AC_RUN_IFELSE'.
-- Macro: AC_LANG_DEFINES_PROVIDED
This macro is called as a witness that the file
'conftest.EXTENSION' appropriate for the current language is
complete, including all previously determined results from
'AC_DEFINE'. This macro is seldom called directly, but exists if
you have a compelling reason to write a conftest file without using
'AC_LANG_SOURCE', yet still want to avoid a syntax warning from
'AC_LANG_CONFTEST'.
-- Macro: AC_LANG_SOURCE (SOURCE)
Expands into the SOURCE, with the definition of all the 'AC_DEFINE'
performed so far. This macro includes an expansion of
'AC_LANG_DEFINES_PROVIDED'.
In many cases, you may find it more convenient to use the wrapper
'AC_LANG_PROGRAM'.
For instance, executing (observe the double quotation!):
AC_INIT([Hello], [1.0], [bug-hello@example.org], [],
[http://www.example.org/])
AC_DEFINE([HELLO_WORLD], ["Hello, World\n"],
[Greetings string.])
AC_LANG([C])
AC_LANG_CONFTEST(
[AC_LANG_SOURCE([[const char hw[] = "Hello, World\n";]])])
gcc -E -dD conftest.c
on a system with 'gcc' installed, results in:
...
#define PACKAGE_NAME "Hello"
#define PACKAGE_TARNAME "hello"
#define PACKAGE_VERSION "1.0"
#define PACKAGE_STRING "Hello 1.0"
#define PACKAGE_BUGREPORT "bug-hello@example.org"
#define PACKAGE_URL "http://www.example.org/"
#define HELLO_WORLD "Hello, World\n"
const char hw[] = "Hello, World\n";
When the test language is Fortran, Erlang, or Go, the 'AC_DEFINE'
definitions are not automatically translated into constants in the
source code by this macro.
-- Macro: AC_LANG_PROGRAM (PROLOGUE, BODY)
Expands into a source file which consists of the PROLOGUE, and then
BODY as body of the main function (e.g., 'main' in C). Since it
uses 'AC_LANG_SOURCE', the features of the latter are available.
For instance:
AC_INIT([Hello], [1.0], [bug-hello@example.org], [],
[http://www.example.org/])
AC_DEFINE([HELLO_WORLD], ["Hello, World\n"],
[Greetings string.])
AC_LANG_CONFTEST(
[AC_LANG_PROGRAM([[const char hw[] = "Hello, World\n";]],
[[fputs (hw, stdout);]])])
gcc -E -dD conftest.c
on a system with 'gcc' installed, results in:
...
#define PACKAGE_NAME "Hello"
#define PACKAGE_TARNAME "hello"
#define PACKAGE_VERSION "1.0"
#define PACKAGE_STRING "Hello 1.0"
#define PACKAGE_BUGREPORT "bug-hello@example.org"
#define PACKAGE_URL "http://www.example.org/"
#define HELLO_WORLD "Hello, World\n"
const char hw[] = "Hello, World\n";
int
main ()
{
fputs (hw, stdout);
;
return 0;
}
In Erlang tests, the created source file is that of an Erlang module
called 'conftest' ('conftest.erl'). This module defines and exports at
least one 'start/0' function, which is called to perform the test. The
PROLOGUE is optional code that is inserted between the module header and
the 'start/0' function definition. BODY is the body of the 'start/0'
function without the final period (*note Runtime::, about constraints on
this function's behavior).
For instance:
AC_INIT([Hello], [1.0], [bug-hello@example.org])
AC_LANG(Erlang)
AC_LANG_CONFTEST(
[AC_LANG_PROGRAM([[-define(HELLO_WORLD, "Hello, world!").]],
[[io:format("~s~n", [?HELLO_WORLD])]])])
cat conftest.erl
results in:
-module(conftest).
-export([start/0]).
-define(HELLO_WORLD, "Hello, world!").
start() ->
io:format("~s~n", [?HELLO_WORLD])
.
-- Macro: AC_LANG_CALL (PROLOGUE, FUNCTION)
Expands into a source file which consists of the PROLOGUE, and then
a call to the FUNCTION as body of the main function (e.g., 'main'
in C). Since it uses 'AC_LANG_PROGRAM', the feature of the latter
are available.
This function will probably be replaced in the future by a version
which would enable specifying the arguments. The use of this macro
is not encouraged, as it violates strongly the typing system.
This macro cannot be used for Erlang tests.
-- Macro: AC_LANG_FUNC_LINK_TRY (FUNCTION)
Expands into a source file which uses the FUNCTION in the body of
the main function (e.g., 'main' in C). Since it uses
'AC_LANG_PROGRAM', the features of the latter are available.
As 'AC_LANG_CALL', this macro is documented only for completeness.
It is considered to be severely broken, and in the future will be
removed in favor of actual function calls (with properly typed
arguments).
This macro cannot be used for Erlang tests.
File: autoconf.info, Node: Running the Preprocessor, Next: Running the Compiler, Prev: Writing Test Programs, Up: Writing Tests
6.3 Running the Preprocessor
============================
Sometimes one might need to run the preprocessor on some source file.
_Usually it is a bad idea_, as you typically need to _compile_ your
project, not merely run the preprocessor on it; therefore you certainly
want to run the compiler, not the preprocessor. Resist the temptation
of following the easiest path.
Nevertheless, if you need to run the preprocessor, then use
'AC_PREPROC_IFELSE'.
The macros described in this section cannot be used for tests in
Erlang, Fortran, or Go, since those languages require no preprocessor.
-- Macro: AC_PREPROC_IFELSE (INPUT, [ACTION-IF-TRUE],
[ACTION-IF-FALSE])
Run the preprocessor of the current language (*note Language
Choice::) on the INPUT, run the shell commands ACTION-IF-TRUE on
success, ACTION-IF-FALSE otherwise. The INPUT can be made by
'AC_LANG_PROGRAM' and friends.
This macro uses 'CPPFLAGS', but not 'CFLAGS', because '-g', '-O',
etc. are not valid options to many C preprocessors.
It is customary to report unexpected failures with
'AC_MSG_FAILURE'. If needed, ACTION-IF-TRUE can further access the
preprocessed output in the file 'conftest.i'.
For instance:
AC_INIT([Hello], [1.0], [bug-hello@example.org])
AC_DEFINE([HELLO_WORLD], ["Hello, World\n"],
[Greetings string.])
AC_PREPROC_IFELSE(
[AC_LANG_PROGRAM([[const char hw[] = "Hello, World\n";]],
[[fputs (hw, stdout);]])],
[AC_MSG_RESULT([OK])],
[AC_MSG_FAILURE([unexpected preprocessor failure])])
results in:
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking how to run the C preprocessor... gcc -E
OK
The macro 'AC_TRY_CPP' (*note Obsolete Macros::) used to play the
role of 'AC_PREPROC_IFELSE', but double quotes its argument, making it
impossible to use it to elaborate sources. You are encouraged to get
rid of your old use of the macro 'AC_TRY_CPP' in favor of
'AC_PREPROC_IFELSE', but, in the first place, are you sure you need to
run the _preprocessor_ and not the compiler?
-- Macro: AC_EGREP_HEADER (PATTERN, HEADER-FILE, ACTION-IF-FOUND,
[ACTION-IF-NOT-FOUND])
If the output of running the preprocessor on the system header file
HEADER-FILE matches the extended regular expression PATTERN,
execute shell commands ACTION-IF-FOUND, otherwise execute
ACTION-IF-NOT-FOUND.
-- Macro: AC_EGREP_CPP (PATTERN, PROGRAM, [ACTION-IF-FOUND],
[ACTION-IF-NOT-FOUND])
PROGRAM is the text of a C or C++ program, on which shell variable,
back quote, and backslash substitutions are performed. If the
output of running the preprocessor on PROGRAM matches the extended
regular expression PATTERN, execute shell commands ACTION-IF-FOUND,
otherwise execute ACTION-IF-NOT-FOUND.
File: autoconf.info, Node: Running the Compiler, Next: Running the Linker, Prev: Running the Preprocessor, Up: Writing Tests
6.4 Running the Compiler
========================
To check for a syntax feature of the current language's (*note Language
Choice::) compiler, such as whether it recognizes a certain keyword, or
simply to try some library feature, use 'AC_COMPILE_IFELSE' to try to
compile a small program that uses that feature.
-- Macro: AC_COMPILE_IFELSE (INPUT, [ACTION-IF-TRUE],
[ACTION-IF-FALSE])
Run the compiler and compilation flags of the current language
(*note Language Choice::) on the INPUT, run the shell commands
ACTION-IF-TRUE on success, ACTION-IF-FALSE otherwise. The INPUT
can be made by 'AC_LANG_PROGRAM' and friends.
It is customary to report unexpected failures with
'AC_MSG_FAILURE'. This macro does not try to link; use
'AC_LINK_IFELSE' if you need to do that (*note Running the
Linker::). If needed, ACTION-IF-TRUE can further access the
just-compiled object file 'conftest.$OBJEXT'.
This macro uses 'AC_REQUIRE' for the compiler associated with the
current language, which means that if the compiler has not yet been
determined, the compiler determination will be made prior to the
body of the outermost 'AC_DEFUN' macro that triggered this macro to
expand (*note Expanded Before Required::).
For tests in Erlang, the INPUT must be the source code of a module
named 'conftest'. 'AC_COMPILE_IFELSE' generates a 'conftest.beam' file
that can be interpreted by the Erlang virtual machine ('ERL'). It is
recommended to use 'AC_LANG_PROGRAM' to specify the test program, to
ensure that the Erlang module has the right name.
File: autoconf.info, Node: Running the Linker, Next: Runtime, Prev: Running the Compiler, Up: Writing Tests
6.5 Running the Linker
======================
To check for a library, a function, or a global variable, Autoconf
'configure' scripts try to compile and link a small program that uses
it. This is unlike Metaconfig, which by default uses 'nm' or 'ar' on
the C library to try to figure out which functions are available.
Trying to link with the function is usually a more reliable approach
because it avoids dealing with the variations in the options and output
formats of 'nm' and 'ar' and in the location of the standard libraries.
It also allows configuring for cross-compilation or checking a
function's runtime behavior if needed. On the other hand, it can be
slower than scanning the libraries once, but accuracy is more important
than speed.
'AC_LINK_IFELSE' is used to compile test programs to test for
functions and global variables. It is also used by 'AC_CHECK_LIB' to
check for libraries (*note Libraries::), by adding the library being
checked for to 'LIBS' temporarily and trying to link a small program.
-- Macro: AC_LINK_IFELSE (INPUT, [ACTION-IF-TRUE], [ACTION-IF-FALSE])
Run the compiler (and compilation flags) and the linker of the
current language (*note Language Choice::) on the INPUT, run the
shell commands ACTION-IF-TRUE on success, ACTION-IF-FALSE
otherwise. The INPUT can be made by 'AC_LANG_PROGRAM' and friends.
If needed, ACTION-IF-TRUE can further access the just-linked
program file 'conftest$EXEEXT'.
'LDFLAGS' and 'LIBS' are used for linking, in addition to the
current compilation flags.
It is customary to report unexpected failures with
'AC_MSG_FAILURE'. This macro does not try to execute the program;
use 'AC_RUN_IFELSE' if you need to do that (*note Runtime::).
The 'AC_LINK_IFELSE' macro cannot be used for Erlang tests, since
Erlang programs are interpreted and do not require linking.
File: autoconf.info, Node: Runtime, Next: Systemology, Prev: Running the Linker, Up: Writing Tests
6.6 Checking Runtime Behavior
=============================
Sometimes you need to find out how a system performs at runtime, such as
whether a given function has a certain capability or bug. If you can,
make such checks when your program runs instead of when it is
configured. You can check for things like the machine's endianness when
your program initializes itself.
If you really need to test for a runtime behavior while configuring,
you can write a test program to determine the result, and compile and
run it using 'AC_RUN_IFELSE'. Avoid running test programs if possible,
because this prevents people from configuring your package for
cross-compiling.
-- Macro: AC_RUN_IFELSE (INPUT, [ACTION-IF-TRUE], [ACTION-IF-FALSE],
[ACTION-IF-CROSS-COMPILING = AC_MSG_FAILURE])
Run the compiler (and compilation flags) and the linker of the
current language (*note Language Choice::) on the INPUT, then
execute the resulting program. If the program returns an exit
status of 0 when executed, run shell commands ACTION-IF-TRUE.
Otherwise, run shell commands ACTION-IF-FALSE.
The INPUT can be made by 'AC_LANG_PROGRAM' and friends. 'LDFLAGS'
and 'LIBS' are used for linking, in addition to the compilation
flags of the current language (*note Language Choice::).
Additionally, ACTION-IF-TRUE can run './conftest$EXEEXT' for
further testing.
In the ACTION-IF-FALSE section, the failing exit status is
available in the shell variable '$?'. This exit status might be
that of a failed compilation, or it might be that of a failed
program execution.
If cross-compilation mode is enabled (this is the case if either
the compiler being used does not produce executables that run on
the system where 'configure' is being run, or if the options
'--build' and '--host' were both specified and their values are
different), then the test program is not run. If the optional
shell commands ACTION-IF-CROSS-COMPILING are given, those commands
are run instead; typically these commands provide pessimistic
defaults that allow cross-compilation to work even if the guess was
wrong. If the fourth argument is empty or omitted, but
cross-compilation is detected, then 'configure' prints an error
message and exits. If you want your package to be useful in a
cross-compilation scenario, you _should_ provide a non-empty
ACTION-IF-CROSS-COMPILING clause, as well as wrap the
'AC_RUN_IFELSE' compilation inside an 'AC_CACHE_CHECK' (*note
Caching Results::) which allows the user to override the
pessimistic default if needed.
It is customary to report unexpected failures with
'AC_MSG_FAILURE'.
'autoconf' prints a warning message when creating 'configure' each
time it encounters a call to 'AC_RUN_IFELSE' with no
ACTION-IF-CROSS-COMPILING argument given. If you are not concerned
about users configuring your package for cross-compilation, you may
ignore the warning. A few of the macros distributed with Autoconf
produce this warning message; but if this is a problem for you, please
report it as a bug, along with an appropriate pessimistic guess to use
instead.
To configure for cross-compiling you can also choose a value for
those parameters based on the canonical system name (*note Manual
Configuration::). Alternatively, set up a test results cache file with
the correct values for the host system (*note Caching Results::).
To provide a default for calls of 'AC_RUN_IFELSE' that are embedded
in other macros, including a few of the ones that come with Autoconf,
you can test whether the shell variable 'cross_compiling' is set to
'yes', and then use an alternate method to get the results instead of
calling the macros.
It is also permissible to temporarily assign to 'cross_compiling' in
order to force tests to behave as though they are in a cross-compilation
environment, particularly since this provides a way to test your
ACTION-IF-CROSS-COMPILING even when you are not using a cross-compiler.
# We temporarily set cross-compile mode to force AC_COMPUTE_INT
# to use the slow link-only method
save_cross_compiling=$cross_compiling
cross_compiling=yes
AC_COMPUTE_INT([...])
cross_compiling=$save_cross_compiling
A C or C++ runtime test should be portable. *Note Portable C and
C++::.
Erlang tests must exit themselves the Erlang VM by calling the
'halt/1' function: the given status code is used to determine the
success of the test (status is '0') or its failure (status is different
than '0'), as explained above. It must be noted that data output
through the standard output (e.g., using 'io:format/2') may be truncated
when halting the VM. Therefore, if a test must output configuration
information, it is recommended to create and to output data into the
temporary file named 'conftest.out', using the functions of module
'file'. The 'conftest.out' file is automatically deleted by the
'AC_RUN_IFELSE' macro. For instance, a simplified implementation of
Autoconf's 'AC_ERLANG_SUBST_LIB_DIR' macro is:
AC_INIT([LibdirTest], [1.0], [bug-libdirtest@example.org])
AC_ERLANG_NEED_ERL
AC_LANG(Erlang)
AC_RUN_IFELSE(
[AC_LANG_PROGRAM([], [dnl
file:write_file("conftest.out", code:lib_dir()),
halt(0)])],
[echo "code:lib_dir() returned: `cat conftest.out`"],
[AC_MSG_FAILURE([test Erlang program execution failed])])
File: autoconf.info, Node: Systemology, Next: Multiple Cases, Prev: Runtime, Up: Writing Tests
6.7 Systemology
===============
This section aims at presenting some systems and pointers to
documentation. It may help you addressing particular problems reported
by users.
Posix-conforming systems (http://www.opengroup.org/susv3) are derived
from the Unix operating system (http://www.bell-labs.com/history/unix/).
The Rosetta Stone for Unix (http://bhami.com/rosetta.html) contains a
table correlating the features of various Posix-conforming systems.
Unix History (http://www.levenez.com/unix/) is a simplified diagram of
how many Unix systems were derived from each other.
The Heirloom Project (http://heirloom.sourceforge.net/) provides some
variants of traditional implementations of Unix utilities.
Darwin
Darwin is also known as Mac OS X. Beware that the file system
_can_ be case-preserving, but case insensitive. This can cause
nasty problems, since for instance the installation attempt for a
package having an 'INSTALL' file can result in 'make install'
report that nothing was to be done!
That's all dependent on whether the file system is a UFS (case
sensitive) or HFS+ (case preserving). By default Apple wants you
to install the OS on HFS+. Unfortunately, there are some pieces of
software which really need to be built on UFS. We may want to
rebuild Darwin to have both UFS and HFS+ available (and put the
/local/build tree on the UFS).
QNX 4.25
QNX is a realtime operating system running on Intel architecture
meant to be scalable from the small embedded systems to the hundred
processor super-computer. It claims to be Posix certified. More
information is available on the QNX home page
(http://www.qnx.com/).
Tru64
Documentation of several versions of Tru64
(http://h30097.www3.hp.com/docs/) is available in different
formats.
Unix version 7
Officially this was called the "Seventh Edition" of "the UNIX
time-sharing system" but we use the more-common name "Unix version
7". Documentation is available in the Unix Seventh Edition Manual
(http://plan9.bell-labs.com/7thEdMan/). Previous versions of Unix
are called "Unix version 6", etc., but they were not as widely
used.
File: autoconf.info, Node: Multiple Cases, Prev: Systemology, Up: Writing Tests
6.8 Multiple Cases
==================
Some operations are accomplished in several possible ways, depending on
the OS variant. Checking for them essentially requires a "case
statement". Autoconf does not directly provide one; however, it is easy
to simulate by using a shell variable to keep track of whether a way to
perform the operation has been found yet.
Here is an example that uses the shell variable 'fstype' to keep
track of whether the remaining cases need to be checked. Note that
since the value of 'fstype' is under our control, we don't have to use
the longer 'test "x$fstype" = xno'.
AC_MSG_CHECKING([how to get file system type])
fstype=no
# The order of these tests is important.
AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <sys/statvfs.h>
#include <sys/fstyp.h>]])],
[AC_DEFINE([FSTYPE_STATVFS], [1],
[Define if statvfs exists.])
fstype=SVR4])
if test $fstype = no; then
AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <sys/statfs.h>
#include <sys/fstyp.h>]])],
[AC_DEFINE([FSTYPE_USG_STATFS], [1],
[Define if USG statfs.])
fstype=SVR3])
fi
if test $fstype = no; then
AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include <sys/statfs.h>
#include <sys/vmount.h>]])]),
[AC_DEFINE([FSTYPE_AIX_STATFS], [1],
[Define if AIX statfs.])
fstype=AIX])
fi
# (more cases omitted here)
AC_MSG_RESULT([$fstype])
File: autoconf.info, Node: Results, Next: Programming in M4, Prev: Writing Tests, Up: Top
7 Results of Tests
******************
Once 'configure' has determined whether a feature exists, what can it do
to record that information? There are four sorts of things it can do:
define a C preprocessor symbol, set a variable in the output files, save
the result in a cache file for future 'configure' runs, and print a
message letting the user know the result of the test.
* Menu:
* Defining Symbols:: Defining C preprocessor symbols
* Setting Output Variables:: Replacing variables in output files
* Special Chars in Variables:: Characters to beware of in variables
* Caching Results:: Speeding up subsequent 'configure' runs
* Printing Messages:: Notifying 'configure' users
File: autoconf.info, Node: Defining Symbols, Next: Setting Output Variables, Up: Results
7.1 Defining C Preprocessor Symbols
===================================
A common action to take in response to a feature test is to define a C
preprocessor symbol indicating the results of the test. That is done by
calling 'AC_DEFINE' or 'AC_DEFINE_UNQUOTED'.
By default, 'AC_OUTPUT' places the symbols defined by these macros
into the output variable 'DEFS', which contains an option
'-DSYMBOL=VALUE' for each symbol defined. Unlike in Autoconf version 1,
there is no variable 'DEFS' defined while 'configure' is running. To
check whether Autoconf macros have already defined a certain C
preprocessor symbol, test the value of the appropriate cache variable,
as in this example:
AC_CHECK_FUNC([vprintf], [AC_DEFINE([HAVE_VPRINTF], [1],
[Define if vprintf exists.])])
if test "x$ac_cv_func_vprintf" != xyes; then
AC_CHECK_FUNC([_doprnt], [AC_DEFINE([HAVE_DOPRNT], [1],
[Define if _doprnt exists.])])
fi
If 'AC_CONFIG_HEADERS' has been called, then instead of creating
'DEFS', 'AC_OUTPUT' creates a header file by substituting the correct
values into '#define' statements in a template file. *Note
Configuration Headers::, for more information about this kind of output.
-- Macro: AC_DEFINE (VARIABLE, VALUE, [DESCRIPTION])
-- Macro: AC_DEFINE (VARIABLE)
Define VARIABLE to VALUE (verbatim), by defining a C preprocessor
macro for VARIABLE. VARIABLE should be a C identifier, optionally
suffixed by a parenthesized argument list to define a C
preprocessor macro with arguments. The macro argument list, if
present, should be a comma-separated list of C identifiers,
possibly terminated by an ellipsis '...' if C99 syntax is employed.
VARIABLE should not contain comments, white space, trigraphs,
backslash-newlines, universal character names, or non-ASCII
characters.
VALUE may contain backslash-escaped newlines, which will be
preserved if you use 'AC_CONFIG_HEADERS' but flattened if passed
via '@DEFS@' (with no effect on the compilation, since the
preprocessor sees only one line in the first place). VALUE should
not contain raw newlines. If you are not using
'AC_CONFIG_HEADERS', VALUE should not contain any '#' characters,
as 'make' tends to eat them. To use a shell variable, use
'AC_DEFINE_UNQUOTED' instead.
DESCRIPTION is only useful if you are using 'AC_CONFIG_HEADERS'.
In this case, DESCRIPTION is put into the generated 'config.h.in'
as the comment before the macro define. The following example
defines the C preprocessor variable 'EQUATION' to be the string
constant '"$a > $b"':
AC_DEFINE([EQUATION], ["$a > $b"],
[Equation string.])
If neither VALUE nor DESCRIPTION are given, then VALUE defaults to
1 instead of to the empty string. This is for backwards
compatibility with older versions of Autoconf, but this usage is
obsolescent and may be withdrawn in future versions of Autoconf.
If the VARIABLE is a literal string, it is passed to
'm4_pattern_allow' (*note Forbidden Patterns::).
If multiple 'AC_DEFINE' statements are executed for the same
VARIABLE name (not counting any parenthesized argument list), the
last one wins.
-- Macro: AC_DEFINE_UNQUOTED (VARIABLE, VALUE, [DESCRIPTION])
-- Macro: AC_DEFINE_UNQUOTED (VARIABLE)
Like 'AC_DEFINE', but three shell expansions are
performed--once--on VARIABLE and VALUE: variable expansion ('$'),
command substitution ('`'), and backslash escaping ('\'), as if in
an unquoted here-document. Single and double quote characters in
the value have no special meaning. Use this macro instead of
'AC_DEFINE' when VARIABLE or VALUE is a shell variable. Examples:
AC_DEFINE_UNQUOTED([config_machfile], ["$machfile"],
[Configuration machine file.])
AC_DEFINE_UNQUOTED([GETGROUPS_T], [$ac_cv_type_getgroups],
[getgroups return type.])
AC_DEFINE_UNQUOTED([$ac_tr_hdr], [1],
[Translated header name.])
Due to a syntactical bizarreness of the Bourne shell, do not use
semicolons to separate 'AC_DEFINE' or 'AC_DEFINE_UNQUOTED' calls from
other macro calls or shell code; that can cause syntax errors in the
resulting 'configure' script. Use either blanks or newlines. That is,
do this:
AC_CHECK_HEADER([elf.h],
[AC_DEFINE([SVR4], [1], [System V Release 4]) LIBS="-lelf $LIBS"])
or this:
AC_CHECK_HEADER([elf.h],
[AC_DEFINE([SVR4], [1], [System V Release 4])
LIBS="-lelf $LIBS"])
instead of this:
AC_CHECK_HEADER([elf.h],
[AC_DEFINE([SVR4], [1], [System V Release 4]); LIBS="-lelf $LIBS"])
File: autoconf.info, Node: Setting Output Variables, Next: Special Chars in Variables, Prev: Defining Symbols, Up: Results
7.2 Setting Output Variables
============================
Another way to record the results of tests is to set "output variables",
which are shell variables whose values are substituted into files that
'configure' outputs. The two macros below create new output variables.
*Note Preset Output Variables::, for a list of output variables that are
always available.
-- Macro: AC_SUBST (VARIABLE, [VALUE])
Create an output variable from a shell variable. Make 'AC_OUTPUT'
substitute the variable VARIABLE into output files (typically one
or more makefiles). This means that 'AC_OUTPUT' replaces instances
of '@VARIABLE@' in input files with the value that the shell
variable VARIABLE has when 'AC_OUTPUT' is called. The value can
contain any non-'NUL' character, including newline. If you are
using Automake 1.11 or newer, for newlines in values you might want
to consider using 'AM_SUBST_NOTMAKE' to prevent 'automake' from
adding a line 'VARIABLE = @VARIABLE@' to the 'Makefile.in' files
(*note Automake: (automake)Optional.).
Variable occurrences should not overlap: e.g., an input file should
not contain '@VAR1@VAR2@' if VAR1 and VAR2 are variable names. The
substituted value is not rescanned for more output variables;
occurrences of '@VARIABLE@' in the value are inserted literally
into the output file. (The algorithm uses the special marker
'|#_!!_#|' internally, so neither the substituted value nor the
output file may contain '|#_!!_#|'.)
If VALUE is given, in addition assign it to VARIABLE.
The string VARIABLE is passed to 'm4_pattern_allow' (*note
Forbidden Patterns::).
-- Macro: AC_SUBST_FILE (VARIABLE)
Another way to create an output variable from a shell variable.
Make 'AC_OUTPUT' insert (without substitutions) the contents of the
file named by shell variable VARIABLE into output files. This
means that 'AC_OUTPUT' replaces instances of '@VARIABLE@' in output
files (such as 'Makefile.in') with the contents of the file that
the shell variable VARIABLE names when 'AC_OUTPUT' is called. Set
the variable to '/dev/null' for cases that do not have a file to
insert. This substitution occurs only when the '@VARIABLE@' is on
a line by itself, optionally surrounded by spaces and tabs. The
substitution replaces the whole line, including the spaces, tabs,
and the terminating newline.
This macro is useful for inserting makefile fragments containing
special dependencies or other 'make' directives for particular host
or target types into makefiles. For example, 'configure.ac' could
contain:
AC_SUBST_FILE([host_frag])
host_frag=$srcdir/conf/sun4.mh
and then a 'Makefile.in' could contain:
@host_frag@
The string VARIABLE is passed to 'm4_pattern_allow' (*note
Forbidden Patterns::).
Running 'configure' in varying environments can be extremely
dangerous. If for instance the user runs 'CC=bizarre-cc ./configure',
then the cache, 'config.h', and many other output files depend upon
'bizarre-cc' being the C compiler. If for some reason the user runs
'./configure' again, or if it is run via './config.status --recheck',
(*Note Automatic Remaking::, and *note config.status Invocation::), then
the configuration can be inconsistent, composed of results depending
upon two different compilers.
Environment variables that affect this situation, such as 'CC' above,
are called "precious variables", and can be declared as such by
'AC_ARG_VAR'.
-- Macro: AC_ARG_VAR (VARIABLE, DESCRIPTION)
Declare VARIABLE is a precious variable, and include its
DESCRIPTION in the variable section of './configure --help'.
Being precious means that
- VARIABLE is substituted via 'AC_SUBST'.
- The value of VARIABLE when 'configure' was launched is saved
in the cache, including if it was not specified on the command
line but via the environment. Indeed, while 'configure' can
notice the definition of 'CC' in './configure CC=bizarre-cc',
it is impossible to notice it in 'CC=bizarre-cc ./configure',
which, unfortunately, is what most users do.
We emphasize that it is the _initial_ value of VARIABLE which
is saved, not that found during the execution of 'configure'.
Indeed, specifying './configure FOO=foo' and letting
'./configure' guess that 'FOO' is 'foo' can be two different
things.
- VARIABLE is checked for consistency between two 'configure'
runs. For instance:
$ ./configure --silent --config-cache
$ CC=cc ./configure --silent --config-cache
configure: error: `CC' was not set in the previous run
configure: error: changes in the environment can compromise \
the build
configure: error: run `make distclean' and/or \
`rm config.cache' and start over
and similarly if the variable is unset, or if its content is
changed. If the content has white space changes only, then
the error is degraded to a warning only, but the old value is
reused.
- VARIABLE is kept during automatic reconfiguration (*note
config.status Invocation::) as if it had been passed as a
command line argument, including when no cache is used:
$ CC=/usr/bin/cc ./configure var=raboof --silent
$ ./config.status --recheck
running CONFIG_SHELL=/bin/sh /bin/sh ./configure var=raboof \
CC=/usr/bin/cc --no-create --no-recursion
File: autoconf.info, Node: Special Chars in Variables, Next: Caching Results, Prev: Setting Output Variables, Up: Results
7.3 Special Characters in Output Variables
==========================================
Many output variables are intended to be evaluated both by 'make' and by
the shell. Some characters are expanded differently in these two
contexts, so to avoid confusion these variables' values should not
contain any of the following characters:
" # $ & ' ( ) * ; < > ? [ \ ^ ` |
Also, these variables' values should neither contain newlines, nor
start with '~', nor contain white space or ':' immediately followed by
'~'. The values can contain nonempty sequences of white space
characters like tabs and spaces, but each such sequence might
arbitrarily be replaced by a single space during substitution.
These restrictions apply both to the values that 'configure'
computes, and to the values set directly by the user. For example, the
following invocations of 'configure' are problematic, since they attempt
to use special characters within 'CPPFLAGS' and white space within
'$(srcdir)':
CPPFLAGS='-DOUCH="&\"#$*?"' '../My Source/ouch-1.0/configure'
'../My Source/ouch-1.0/configure' CPPFLAGS='-DOUCH="&\"#$*?"'
File: autoconf.info, Node: Caching Results, Next: Printing Messages, Prev: Special Chars in Variables, Up: Results
7.4 Caching Results
===================
To avoid checking for the same features repeatedly in various
'configure' scripts (or in repeated runs of one script), 'configure' can
optionally save the results of many checks in a "cache file" (*note
Cache Files::). If a 'configure' script runs with caching enabled and
finds a cache file, it reads the results of previous runs from the cache
and avoids rerunning those checks. As a result, 'configure' can then
run much faster than if it had to perform all of the checks every time.
-- Macro: AC_CACHE_VAL (CACHE-ID, COMMANDS-TO-SET-IT)
Ensure that the results of the check identified by CACHE-ID are
available. If the results of the check were in the cache file that
was read, and 'configure' was not given the '--quiet' or '--silent'
option, print a message saying that the result was cached;
otherwise, run the shell commands COMMANDS-TO-SET-IT. If the shell
commands are run to determine the value, the value is saved in the
cache file just before 'configure' creates its output files. *Note
Cache Variable Names::, for how to choose the name of the CACHE-ID
variable.
The COMMANDS-TO-SET-IT _must have no side effects_ except for
setting the variable CACHE-ID, see below.
-- Macro: AC_CACHE_CHECK (MESSAGE, CACHE-ID, COMMANDS-TO-SET-IT)
A wrapper for 'AC_CACHE_VAL' that takes care of printing the
messages. This macro provides a convenient shorthand for the most
common way to use these macros. It calls 'AC_MSG_CHECKING' for
MESSAGE, then 'AC_CACHE_VAL' with the CACHE-ID and COMMANDS
arguments, and 'AC_MSG_RESULT' with CACHE-ID.
The COMMANDS-TO-SET-IT _must have no side effects_ except for
setting the variable CACHE-ID, see below.
It is common to find buggy macros using 'AC_CACHE_VAL' or
'AC_CACHE_CHECK', because people are tempted to call 'AC_DEFINE' in the
COMMANDS-TO-SET-IT. Instead, the code that _follows_ the call to
'AC_CACHE_VAL' should call 'AC_DEFINE', by examining the value of the
cache variable. For instance, the following macro is broken:
AC_DEFUN([AC_SHELL_TRUE],
[AC_CACHE_CHECK([whether true(1) works], [my_cv_shell_true_works],
[my_cv_shell_true_works=no
(true) 2>/dev/null && my_cv_shell_true_works=yes
if test "x$my_cv_shell_true_works" = xyes; then
AC_DEFINE([TRUE_WORKS], [1],
[Define if `true(1)' works properly.])
fi])
])
This fails if the cache is enabled: the second time this macro is run,
'TRUE_WORKS' _will not be defined_. The proper implementation is:
AC_DEFUN([AC_SHELL_TRUE],
[AC_CACHE_CHECK([whether true(1) works], [my_cv_shell_true_works],
[my_cv_shell_true_works=no
(true) 2>/dev/null && my_cv_shell_true_works=yes])
if test "x$my_cv_shell_true_works" = xyes; then
AC_DEFINE([TRUE_WORKS], [1],
[Define if `true(1)' works properly.])
fi
])
Also, COMMANDS-TO-SET-IT should not print any messages, for example
with 'AC_MSG_CHECKING'; do that before calling 'AC_CACHE_VAL', so the
messages are printed regardless of whether the results of the check are
retrieved from the cache or determined by running the shell commands.
* Menu:
* Cache Variable Names:: Shell variables used in caches
* Cache Files:: Files 'configure' uses for caching
* Cache Checkpointing:: Loading and saving the cache file
File: autoconf.info, Node: Cache Variable Names, Next: Cache Files, Up: Caching Results
7.4.1 Cache Variable Names
--------------------------
The names of cache variables should have the following format:
PACKAGE-PREFIX_cv_VALUE-TYPE_SPECIFIC-VALUE_[ADDITIONAL-OPTIONS]
for example, 'ac_cv_header_stat_broken' or 'ac_cv_prog_gcc_traditional'.
The parts of the variable name are:
PACKAGE-PREFIX
An abbreviation for your package or organization; the same prefix
you begin local Autoconf macros with, except lowercase by
convention. For cache values used by the distributed Autoconf
macros, this value is 'ac'.
'_cv_'
Indicates that this shell variable is a cache value. This string
_must_ be present in the variable name, including the leading
underscore.
VALUE-TYPE
A convention for classifying cache values, to produce a rational
naming system. The values used in Autoconf are listed in *note
Macro Names::.
SPECIFIC-VALUE
Which member of the class of cache values this test applies to.
For example, which function ('alloca'), program ('gcc'), or output
variable ('INSTALL').
ADDITIONAL-OPTIONS
Any particular behavior of the specific member that this test
applies to. For example, 'broken' or 'set'. This part of the name
may be omitted if it does not apply.
The values assigned to cache variables may not contain newlines.
Usually, their values are Boolean ('yes' or 'no') or the names of files
or functions; so this is not an important restriction. *note Cache
Variable Index:: for an index of cache variables with documented
semantics.
File: autoconf.info, Node: Cache Files, Next: Cache Checkpointing, Prev: Cache Variable Names, Up: Caching Results
7.4.2 Cache Files
-----------------
A cache file is a shell script that caches the results of configure
tests run on one system so they can be shared between configure scripts
and configure runs. It is not useful on other systems. If its contents
are invalid for some reason, the user may delete or edit it, or override
documented cache variables on the 'configure' command line.
By default, 'configure' uses no cache file, to avoid problems caused
by accidental use of stale cache files.
To enable caching, 'configure' accepts '--config-cache' (or '-C') to
cache results in the file 'config.cache'. Alternatively,
'--cache-file=FILE' specifies that FILE be the cache file. The cache
file is created if it does not exist already. When 'configure' calls
'configure' scripts in subdirectories, it uses the '--cache-file'
argument so that they share the same cache. *Note Subdirectories::, for
information on configuring subdirectories with the 'AC_CONFIG_SUBDIRS'
macro.
'config.status' only pays attention to the cache file if it is given
the '--recheck' option, which makes it rerun 'configure'.
It is wrong to try to distribute cache files for particular system
types. There is too much room for error in doing that, and too much
administrative overhead in maintaining them. For any features that
can't be guessed automatically, use the standard method of the canonical
system type and linking files (*note Manual Configuration::).
The site initialization script can specify a site-wide cache file to
use, instead of the usual per-program cache. In this case, the cache
file gradually accumulates information whenever someone runs a new
'configure' script. (Running 'configure' merges the new cache results
with the existing cache file.) This may cause problems, however, if the
system configuration (e.g., the installed libraries or compilers)
changes and the stale cache file is not deleted.
If 'configure' is interrupted at the right time when it updates a
cache file outside of the build directory where the 'configure' script
is run, it may leave behind a temporary file named after the cache file
with digits following it. You may safely delete such a file.
File: autoconf.info, Node: Cache Checkpointing, Prev: Cache Files, Up: Caching Results
7.4.3 Cache Checkpointing
-------------------------
If your configure script, or a macro called from 'configure.ac', happens
to abort the configure process, it may be useful to checkpoint the cache
a few times at key points using 'AC_CACHE_SAVE'. Doing so reduces the
amount of time it takes to rerun the configure script with (hopefully)
the error that caused the previous abort corrected.
-- Macro: AC_CACHE_LOAD
Loads values from existing cache file, or creates a new cache file
if a cache file is not found. Called automatically from 'AC_INIT'.
-- Macro: AC_CACHE_SAVE
Flushes all cached values to the cache file. Called automatically
from 'AC_OUTPUT', but it can be quite useful to call
'AC_CACHE_SAVE' at key points in 'configure.ac'.
For instance:
... AC_INIT, etc. ...
# Checks for programs.
AC_PROG_CC
AC_PROG_AWK
... more program checks ...
AC_CACHE_SAVE
# Checks for libraries.
AC_CHECK_LIB([nsl], [gethostbyname])
AC_CHECK_LIB([socket], [connect])
... more lib checks ...
AC_CACHE_SAVE
# Might abort...
AM_PATH_GTK([1.0.2], [], [AC_MSG_ERROR([GTK not in path])])
AM_PATH_GTKMM([0.9.5], [], [AC_MSG_ERROR([GTK not in path])])
... AC_OUTPUT, etc. ...
File: autoconf.info, Node: Printing Messages, Prev: Caching Results, Up: Results
7.5 Printing Messages
=====================
'configure' scripts need to give users running them several kinds of
information. The following macros print messages in ways appropriate
for each kind. The arguments to all of them get enclosed in shell
double quotes, so the shell performs variable and back-quote
substitution on them.
These macros are all wrappers around the 'echo' shell command. They
direct output to the appropriate file descriptor (*note File Descriptor
Macros::). 'configure' scripts should rarely need to run 'echo'
directly to print messages for the user. Using these macros makes it
easy to change how and when each kind of message is printed; such
changes need only be made to the macro definitions and all the callers
change automatically.
To diagnose static issues, i.e., when 'autoconf' is run, see *note
Diagnostic Macros::.
-- Macro: AC_MSG_CHECKING (FEATURE-DESCRIPTION)
Notify the user that 'configure' is checking for a particular
feature. This macro prints a message that starts with 'checking '
and ends with '...' and no newline. It must be followed by a call
to 'AC_MSG_RESULT' to print the result of the check and the
newline. The FEATURE-DESCRIPTION should be something like 'whether
the Fortran compiler accepts C++ comments' or 'for c89'.
This macro prints nothing if 'configure' is run with the '--quiet'
or '--silent' option.
-- Macro: AC_MSG_RESULT (RESULT-DESCRIPTION)
Notify the user of the results of a check. RESULT-DESCRIPTION is
almost always the value of the cache variable for the check,
typically 'yes', 'no', or a file name. This macro should follow a
call to 'AC_MSG_CHECKING', and the RESULT-DESCRIPTION should be the
completion of the message printed by the call to 'AC_MSG_CHECKING'.
This macro prints nothing if 'configure' is run with the '--quiet'
or '--silent' option.
-- Macro: AC_MSG_NOTICE (MESSAGE)
Deliver the MESSAGE to the user. It is useful mainly to print a
general description of the overall purpose of a group of feature
checks, e.g.,
AC_MSG_NOTICE([checking if stack overflow is detectable])
This macro prints nothing if 'configure' is run with the '--quiet'
or '--silent' option.
-- Macro: AC_MSG_ERROR (ERROR-DESCRIPTION, [EXIT-STATUS = $?/1])
Notify the user of an error that prevents 'configure' from
completing. This macro prints an error message to the standard
error output and exits 'configure' with EXIT-STATUS ('$?' by
default, except that '0' is converted to '1'). ERROR-DESCRIPTION
should be something like 'invalid value $HOME for \$HOME'.
The ERROR-DESCRIPTION should start with a lower-case letter, and
"cannot" is preferred to "can't".
-- Macro: AC_MSG_FAILURE (ERROR-DESCRIPTION, [EXIT-STATUS])
This 'AC_MSG_ERROR' wrapper notifies the user of an error that
prevents 'configure' from completing _and_ that additional details
are provided in 'config.log'. This is typically used when abnormal
results are found during a compilation.
-- Macro: AC_MSG_WARN (PROBLEM-DESCRIPTION)
Notify the 'configure' user of a possible problem. This macro
prints the message to the standard error output; 'configure'
continues running afterward, so macros that call 'AC_MSG_WARN'
should provide a default (back-up) behavior for the situations they
warn about. PROBLEM-DESCRIPTION should be something like 'ln -s
seems to make hard links'.
File: autoconf.info, Node: Programming in M4, Next: Programming in M4sh, Prev: Results, Up: Top
8 Programming in M4
*******************
Autoconf is written on top of two layers: "M4sugar", which provides
convenient macros for pure M4 programming, and "M4sh", which provides
macros dedicated to shell script generation.
As of this version of Autoconf, these two layers still contain
experimental macros, whose interface might change in the future. As a
matter of fact, _anything that is not documented must not be used_.
* Menu:
* M4 Quotation:: Protecting macros from unwanted expansion
* Using autom4te:: The Autoconf executables backbone
* Programming in M4sugar:: Convenient pure M4 macros
* Debugging via autom4te:: Figuring out what M4 was doing
File: autoconf.info, Node: M4 Quotation, Next: Using autom4te, Up: Programming in M4
8.1 M4 Quotation
================
The most common problem with existing macros is an improper quotation.
This section, which users of Autoconf can skip, but which macro writers
_must_ read, first justifies the quotation scheme that was chosen for
Autoconf and then ends with a rule of thumb. Understanding the former
helps one to follow the latter.
* Menu:
* Active Characters:: Characters that change the behavior of M4
* One Macro Call:: Quotation and one macro call
* Quoting and Parameters:: M4 vs. shell parameters
* Quotation and Nested Macros:: Macros calling macros
* Changequote is Evil:: Worse than INTERCAL: M4 + changequote
* Quadrigraphs:: Another way to escape special characters
* Balancing Parentheses:: Dealing with unbalanced parentheses
* Quotation Rule Of Thumb:: One parenthesis, one quote
File: autoconf.info, Node: Active Characters, Next: One Macro Call, Up: M4 Quotation
8.1.1 Active Characters
-----------------------
To fully understand where proper quotation is important, you first need
to know what the special characters are in Autoconf: '#' introduces a
comment inside which no macro expansion is performed, ',' separates
arguments, '[' and ']' are the quotes themselves(1), '(' and ')' (which
M4 tries to match by pairs), and finally '$' inside a macro definition.
In order to understand the delicate case of macro calls, we first
have to present some obvious failures. Below they are "obvious-ified",
but when you find them in real life, they are usually in disguise.
Comments, introduced by a hash and running up to the newline, are
opaque tokens to the top level: active characters are turned off, and
there is no macro expansion:
# define([def], ine)
=># define([def], ine)
Each time there can be a macro expansion, there is a quotation
expansion, i.e., one level of quotes is stripped:
int tab[10];
=>int tab10;
[int tab[10];]
=>int tab[10];
Without this in mind, the reader might try hopelessly to use her
macro 'array':
define([array], [int tab[10];])
array
=>int tab10;
[array]
=>array
How can you correctly output the intended results(2)?
---------- Footnotes ----------
(1) By itself, M4 uses '`' and '''; it is the M4sugar layer that sets
up the preferred quotes of '[' and ']'.
(2) Using 'defn'.
File: autoconf.info, Node: One Macro Call, Next: Quoting and Parameters, Prev: Active Characters, Up: M4 Quotation
8.1.2 One Macro Call
--------------------
Let's proceed on the interaction between active characters and macros
with this small macro, which just returns its first argument:
define([car], [$1])
The two pairs of quotes above are not part of the arguments of 'define';
rather, they are understood by the top level when it tries to find the
arguments of 'define'. Therefore, assuming 'car' is not already
defined, it is equivalent to write:
define(car, $1)
But, while it is acceptable for a 'configure.ac' to avoid unnecessary
quotes, it is bad practice for Autoconf macros which must both be more
robust and also advocate perfect style.
At the top level, there are only two possibilities: either you quote
or you don't:
car(foo, bar, baz)
=>foo
[car(foo, bar, baz)]
=>car(foo, bar, baz)
Let's pay attention to the special characters:
car(#)
error->EOF in argument list
The closing parenthesis is hidden in the comment; with a hypothetical
quoting, the top level understood it this way:
car([#)]
Proper quotation, of course, fixes the problem:
car([#])
=>#
Here are more examples:
car(foo, bar)
=>foo
car([foo, bar])
=>foo, bar
car((foo, bar))
=>(foo, bar)
car([(foo], [bar)])
=>(foo
define([a], [b])
=>
car(a)
=>b
car([a])
=>b
car([[a]])
=>a
car([[[a]]])
=>[a]
File: autoconf.info, Node: Quoting and Parameters, Next: Quotation and Nested Macros, Prev: One Macro Call, Up: M4 Quotation
8.1.3 Quoting and Parameters
----------------------------
When M4 encounters '$' within a macro definition, followed immediately
by a character it recognizes ('0'...'9', '#', '@', or '*'), it will
perform M4 parameter expansion. This happens regardless of how many
layers of quotes the parameter expansion is nested within, or even if it
occurs in text that will be rescanned as a comment.
define([none], [$1])
=>
define([one], [[$1]])
=>
define([two], [[[$1]]])
=>
define([comment], [# $1])
=>
define([active], [ACTIVE])
=>
none([active])
=>ACTIVE
one([active])
=>active
two([active])
=>[active]
comment([active])
=># active
On the other hand, since autoconf generates shell code, you often
want to output shell variable expansion, rather than performing M4
parameter expansion. To do this, you must use M4 quoting to separate
the '$' from the next character in the definition of your macro. If the
macro definition occurs in single-quoted text, then insert another level
of quoting; if the usage is already inside a double-quoted string, then
split it into concatenated strings.
define([single], [a single-quoted $[]1 definition])
=>
define([double], [[a double-quoted $][1 definition]])
=>
single
=>a single-quoted $1 definition
double
=>a double-quoted $1 definition
Posix states that M4 implementations are free to provide
implementation extensions when '${' is encountered in a macro
definition. Autoconf reserves the longer sequence '${{' for use with
planned extensions that will be available in the future GNU M4 2.0, but
guarantees that all other instances of '${' will be output literally.
Therefore, this idiom can also be used to output shell code parameter
references:
define([first], [${1}])first
=>${1}
Posix also states that '$11' should expand to the first parameter
concatenated with a literal '1', although some versions of GNU M4 expand
the eleventh parameter instead. For portability, you should only use
single-digit M4 parameter expansion.
With this in mind, we can explore the cases where macros invoke
macros...
File: autoconf.info, Node: Quotation and Nested Macros, Next: Changequote is Evil, Prev: Quoting and Parameters, Up: M4 Quotation
8.1.4 Quotation and Nested Macros
---------------------------------
The examples below use the following macros:
define([car], [$1])
define([active], [ACT, IVE])
define([array], [int tab[10]])
Each additional embedded macro call introduces other possible
interesting quotations:
car(active)
=>ACT
car([active])
=>ACT, IVE
car([[active]])
=>active
In the first case, the top level looks for the arguments of 'car',
and finds 'active'. Because M4 evaluates its arguments before applying
the macro, 'active' is expanded, which results in:
car(ACT, IVE)
=>ACT
In the second case, the top level gives 'active' as first and only
argument of 'car', which results in:
active
=>ACT, IVE
i.e., the argument is evaluated _after_ the macro that invokes it. In
the third case, 'car' receives '[active]', which results in:
[active]
=>active
exactly as we already saw above.
The example above, applied to a more realistic example, gives:
car(int tab[10];)
=>int tab10;
car([int tab[10];])
=>int tab10;
car([[int tab[10];]])
=>int tab[10];
Huh? The first case is easily understood, but why is the second wrong,
and the third right? To understand that, you must know that after M4
expands a macro, the resulting text is immediately subjected to macro
expansion and quote removal. This means that the quote removal occurs
twice--first before the argument is passed to the 'car' macro, and
second after the 'car' macro expands to the first argument.
As the author of the Autoconf macro 'car', you then consider it to be
incorrect that your users have to double-quote the arguments of 'car',
so you "fix" your macro. Let's call it 'qar' for quoted car:
define([qar], [[$1]])
and check that 'qar' is properly fixed:
qar([int tab[10];])
=>int tab[10];
Ahhh! That's much better.
But note what you've done: now that the result of 'qar' is always a
literal string, the only time a user can use nested macros is if she
relies on an _unquoted_ macro call:
qar(active)
=>ACT
qar([active])
=>active
leaving no way for her to reproduce what she used to do with 'car':
car([active])
=>ACT, IVE
Worse yet: she wants to use a macro that produces a set of 'cpp' macros:
define([my_includes], [#include <stdio.h>])
car([my_includes])
=>#include <stdio.h>
qar(my_includes)
error->EOF in argument list
This macro, 'qar', because it double quotes its arguments, forces its
users to leave their macro calls unquoted, which is dangerous. Commas
and other active symbols are interpreted by M4 before they are given to
the macro, often not in the way the users expect. Also, because 'qar'
behaves differently from the other macros, it's an exception that should
be avoided in Autoconf.
File: autoconf.info, Node: Changequote is Evil, Next: Quadrigraphs, Prev: Quotation and Nested Macros, Up: M4 Quotation
8.1.5 'changequote' is Evil
---------------------------
The temptation is often high to bypass proper quotation, in particular
when it's late at night. Then, many experienced Autoconf hackers
finally surrender to the dark side of the force and use the ultimate
weapon: 'changequote'.
The M4 builtin 'changequote' belongs to a set of primitives that
allow one to adjust the syntax of the language to adjust it to one's
needs. For instance, by default M4 uses '`' and ''' as quotes, but in
the context of shell programming (and actually of most programming
languages), that's about the worst choice one can make: because of
strings and back-quoted expressions in shell code (such as ''this'' and
'`that`'), and because of literal characters in usual programming
languages (as in ''0''), there are many unbalanced '`' and '''. Proper
M4 quotation then becomes a nightmare, if not impossible. In order to
make M4 useful in such a context, its designers have equipped it with
'changequote', which makes it possible to choose another pair of quotes.
M4sugar, M4sh, Autoconf, and Autotest all have chosen to use '[' and
']'. Not especially because they are unlikely characters, but _because
they are characters unlikely to be unbalanced_.
There are other magic primitives, such as 'changecom' to specify what
syntactic forms are comments (it is common to see 'changecom(<!--, -->)'
when M4 is used to produce HTML pages), 'changeword' and 'changesyntax'
to change other syntactic details (such as the character to denote the
Nth argument, '$' by default, the parentheses around arguments, etc.).
These primitives are really meant to make M4 more useful for specific
domains: they should be considered like command line options:
'--quotes', '--comments', '--words', and '--syntax'. Nevertheless, they
are implemented as M4 builtins, as it makes M4 libraries self contained
(no need for additional options).
There lies the problem...
The problem is that it is then tempting to use them in the middle of
an M4 script, as opposed to its initialization. This, if not carefully
thought out, can lead to disastrous effects: _you are changing the
language in the middle of the execution_. Changing and restoring the
syntax is often not enough: if you happened to invoke macros in between,
these macros are lost, as the current syntax is probably not the one
they were implemented with.
File: autoconf.info, Node: Quadrigraphs, Next: Balancing Parentheses, Prev: Changequote is Evil, Up: M4 Quotation
8.1.6 Quadrigraphs
------------------
When writing an Autoconf macro you may occasionally need to generate
special characters that are difficult to express with the standard
Autoconf quoting rules. For example, you may need to output the regular
expression '[^[]', which matches any character other than '['. This
expression contains unbalanced brackets so it cannot be put easily into
an M4 macro.
Additionally, there are a few m4sugar macros (such as 'm4_split' and
'm4_expand') which internally use special markers in addition to the
regular quoting characters. If the arguments to these macros contain
the literal strings '-=<{(' or ')}>=-', the macros might behave
incorrectly.
You can work around these problems by using one of the following
"quadrigraphs":
'@<:@'
'['
'@:>@'
']'
'@S|@'
'$'
'@%:@'
'#'
'@{:@'
'('
'@:}@'
')'
'@&t@'
Expands to nothing.
Quadrigraphs are replaced at a late stage of the translation process,
after 'm4' is run, so they do not get in the way of M4 quoting. For
example, the string '^@<:@', independently of its quotation, appears as
'^[' in the output.
The empty quadrigraph can be used:
- to mark trailing spaces explicitly
Trailing spaces are smashed by 'autom4te'. This is a feature.
- to produce quadrigraphs and other strings reserved by m4sugar
For instance '@<@&t@:@' produces '@<:@'. For a more contrived
example:
m4_define([a], [A])m4_define([b], [B])m4_define([c], [C])dnl
m4_split([a )}>=- b -=<{( c])
=>[a], [], [B], [], [c]
m4_split([a )}@&t@>=- b -=<@&t@{( c])
=>[a], [)}>=-], [b], [-=<{(], [c]
- to escape _occurrences_ of forbidden patterns
For instance you might want to mention 'AC_FOO' in a comment, while
still being sure that 'autom4te' still catches unexpanded 'AC_*'.
Then write 'AC@&t@_FOO'.
The name '@&t@' was suggested by Paul Eggert:
I should give some credit to the '@&t@' pun. The '&' is my own
invention, but the 't' came from the source code of the ALGOL68C
compiler, written by Steve Bourne (of Bourne shell fame), and which
used 'mt' to denote the empty string. In C, it would have looked
like something like:
char const mt[] = "";
but of course the source code was written in Algol 68.
I don't know where he got 'mt' from: it could have been his own
invention, and I suppose it could have been a common pun around the
Cambridge University computer lab at the time.
File: autoconf.info, Node: Balancing Parentheses, Next: Quotation Rule Of Thumb, Prev: Quadrigraphs, Up: M4 Quotation
8.1.7 Dealing with unbalanced parentheses
-----------------------------------------
One of the pitfalls of portable shell programming is that 'case'
statements require unbalanced parentheses (*note Limitations of Shell
Builtins: case.). With syntax highlighting editors, the presence of
unbalanced ')' can interfere with editors that perform syntax
highlighting of macro contents based on finding the matching '('.
Another concern is how much editing must be done when transferring code
snippets between shell scripts and macro definitions. But most
importantly, the presence of unbalanced parentheses can introduce
expansion bugs.
For an example, here is an underquoted attempt to use the macro
'my_case', which happens to expand to a portable 'case' statement:
AC_DEFUN([my_case],
[case $file_name in
*.c) echo "C source code";;
esac])
AS_IF(:, my_case)
In the above example, the 'AS_IF' call underquotes its arguments. As a
result, the unbalanced ')' generated by the premature expansion of
'my_case' results in expanding 'AS_IF' with a truncated parameter, and
the expansion is syntactically invalid:
if :; then
case $file_name in
*.c
fi echo "C source code";;
esac)
If nothing else, this should emphasize the importance of the quoting
arguments to macro calls. On the other hand, there are several
variations for defining 'my_case' to be more robust, even when used
without proper quoting, each with some benefits and some drawbacks.
Creative literal shell comment
AC_DEFUN([my_case],
[case $file_name in #(
*.c) echo "C source code";;
esac])
This version provides balanced parentheses to several editors, and
can be copied and pasted into a terminal as is. Unfortunately, it
is still unbalanced as an Autoconf argument, since '#(' is an M4
comment that masks the normal properties of '('.
Quadrigraph shell comment
AC_DEFUN([my_case],
[case $file_name in @%:@(
*.c) echo "C source code";;
esac])
This version provides balanced parentheses to even more editors,
and can be used as a balanced Autoconf argument. Unfortunately, it
requires some editing before it can be copied and pasted into a
terminal, and the use of the quadrigraph '@%:@' for '#' reduces
readability.
Quoting just the parenthesis
AC_DEFUN([my_case],
[case $file_name in
*.c[)] echo "C source code";;
esac])
This version quotes the ')', so that it can be used as a balanced
Autoconf argument. As written, this is not balanced to an editor,
but it can be coupled with '[#(]' to meet that need, too. However,
it still requires some edits before it can be copied and pasted
into a terminal.
Double-quoting the entire statement
AC_DEFUN([my_case],
[[case $file_name in #(
*.c) echo "C source code";;
esac]])
Since the entire macro is double-quoted, there is no problem with
using this as an Autoconf argument; and since the double-quoting is
over the entire statement, this code can be easily copied and
pasted into a terminal. However, the double quoting prevents the
expansion of any macros inside the case statement, which may cause
its own set of problems.
Using 'AS_CASE'
AC_DEFUN([my_case],
[AS_CASE([$file_name],
[*.c], [echo "C source code"])])
This version avoids the balancing issue altogether, by relying on
'AS_CASE' (*note Common Shell Constructs::); it also allows for the
expansion of 'AC_REQUIRE' to occur prior to the entire case
statement, rather than within a branch of the case statement that
might not be taken. However, the abstraction comes with a penalty
that it is no longer a quick copy, paste, and edit to get back to
shell code.
File: autoconf.info, Node: Quotation Rule Of Thumb, Prev: Balancing Parentheses, Up: M4 Quotation
8.1.8 Quotation Rule Of Thumb
-----------------------------
To conclude, the quotation rule of thumb is:
_One pair of quotes per pair of parentheses._
Never over-quote, never under-quote, in particular in the definition
of macros. In the few places where the macros need to use brackets
(usually in C program text or regular expressions), properly quote _the
arguments_!
It is common to read Autoconf programs with snippets like:
AC_TRY_LINK(
changequote(<<, >>)dnl
<<#include <time.h>
#ifndef tzname /* For SGI. */
extern char *tzname[]; /* RS6000 and others reject char **tzname. */
#endif>>,
changequote([, ])dnl
[atoi (*tzname);], ac_cv_var_tzname=yes, ac_cv_var_tzname=no)
which is incredibly useless since 'AC_TRY_LINK' is _already_ double
quoting, so you just need:
AC_TRY_LINK(
[#include <time.h>
#ifndef tzname /* For SGI. */
extern char *tzname[]; /* RS6000 and others reject char **tzname. */
#endif],
[atoi (*tzname);],
[ac_cv_var_tzname=yes],
[ac_cv_var_tzname=no])
The M4-fluent reader might note that these two examples are rigorously
equivalent, since M4 swallows both the 'changequote(<<, >>)' and '<<'
'>>' when it "collects" the arguments: these quotes are not part of the
arguments!
Simplified, the example above is just doing this:
changequote(<<, >>)dnl
<<[]>>
changequote([, ])dnl
instead of simply:
[[]]
With macros that do not double quote their arguments (which is the
rule), double-quote the (risky) literals:
AC_LINK_IFELSE([AC_LANG_PROGRAM(
[[#include <time.h>
#ifndef tzname /* For SGI. */
extern char *tzname[]; /* RS6000 and others reject char **tzname. */
#endif]],
[atoi (*tzname);])],
[ac_cv_var_tzname=yes],
[ac_cv_var_tzname=no])
Please note that the macro 'AC_TRY_LINK' is obsolete, so you really
should be using 'AC_LINK_IFELSE' instead.
*Note Quadrigraphs::, for what to do if you run into a hopeless case
where quoting does not suffice.
When you create a 'configure' script using newly written macros,
examine it carefully to check whether you need to add more quotes in
your macros. If one or more words have disappeared in the M4 output,
you need more quotes. When in doubt, quote.
However, it's also possible to put on too many layers of quotes. If
this happens, the resulting 'configure' script may contain unexpanded
macros. The 'autoconf' program checks for this problem by looking for
the string 'AC_' in 'configure'. However, this heuristic does not work
in general: for example, it does not catch overquoting in 'AC_DEFINE'
descriptions.
File: autoconf.info, Node: Using autom4te, Next: Programming in M4sugar, Prev: M4 Quotation, Up: Programming in M4
8.2 Using 'autom4te'
====================
The Autoconf suite, including M4sugar, M4sh, and Autotest, in addition
to Autoconf per se, heavily rely on M4. All these different uses
revealed common needs factored into a layer over M4: 'autom4te'(1).
'autom4te' is a preprocessor that is like 'm4'. It supports M4
extensions designed for use in tools like Autoconf.
* Menu:
* autom4te Invocation:: A GNU M4 wrapper
* Customizing autom4te:: Customizing the Autoconf package
---------- Footnotes ----------
(1) Yet another great name from Lars J. Aas.
File: autoconf.info, Node: autom4te Invocation, Next: Customizing autom4te, Up: Using autom4te
8.2.1 Invoking 'autom4te'
-------------------------
The command line arguments are modeled after M4's:
autom4te OPTIONS FILES
where the FILES are directly passed to 'm4'. By default, GNU M4 is
found during configuration, but the environment variable 'M4' can be set
to tell 'autom4te' where to look. In addition to the regular expansion,
it handles the replacement of the quadrigraphs (*note Quadrigraphs::),
and of '__oline__', the current line in the output. It supports an
extended syntax for the FILES:
'FILE.m4f'
This file is an M4 frozen file. Note that _all the previous files
are ignored_. See the option '--melt' for the rationale.
'FILE?'
If found in the library path, the FILE is included for expansion,
otherwise it is ignored instead of triggering a failure.
Of course, it supports the Autoconf common subset of options:
'--help'
'-h'
Print a summary of the command line options and exit.
'--version'
'-V'
Print the version number of Autoconf and exit.
'--verbose'
'-v'
Report processing steps.
'--debug'
'-d'
Don't remove the temporary files and be even more verbose.
'--include=DIR'
'-I DIR'
Also look for input files in DIR. Multiple invocations accumulate.
'--output=FILE'
'-o FILE'
Save output (script or trace) to FILE. The file '-' stands for the
standard output.
As an extension of 'm4', it includes the following options:
'--warnings=CATEGORY'
'-W CATEGORY'
Report the warnings related to CATEGORY (which can actually be a
comma separated list). *Note Reporting Messages::, macro
'AC_DIAGNOSE', for a comprehensive list of categories. Special
values include:
'all'
report all the warnings
'none'
report none
'error'
treats warnings as errors
'no-CATEGORY'
disable warnings falling into CATEGORY
Warnings about 'syntax' are enabled by default, and the environment
variable 'WARNINGS', a comma separated list of categories, is
honored. 'autom4te -W CATEGORY' actually behaves as if you had
run:
autom4te --warnings=syntax,$WARNINGS,CATEGORY
For example, if you want to disable defaults and 'WARNINGS' of
'autom4te', but enable the warnings about obsolete constructs, you
would use '-W none,obsolete'.
'autom4te' displays a back trace for errors, but not for warnings;
if you want them, just pass '-W error'.
'--melt'
'-M'
Do not use frozen files. Any argument 'FILE.m4f' is replaced by
'FILE.m4'. This helps tracing the macros which are executed only
when the files are frozen, typically 'm4_define'. For instance,
running:
autom4te --melt 1.m4 2.m4f 3.m4 4.m4f input.m4
is roughly equivalent to running:
m4 1.m4 2.m4 3.m4 4.m4 input.m4
while
autom4te 1.m4 2.m4f 3.m4 4.m4f input.m4
is equivalent to:
m4 --reload-state=4.m4f input.m4
'--freeze'
'-F'
Produce a frozen state file. 'autom4te' freezing is stricter than
M4's: it must produce no warnings, and no output other than empty
lines (a line with white space is _not_ empty) and comments
(starting with '#'). Unlike 'm4''s similarly-named option, this
option takes no argument:
autom4te 1.m4 2.m4 3.m4 --freeze --output=3.m4f
corresponds to
m4 1.m4 2.m4 3.m4 --freeze-state=3.m4f
'--mode=OCTAL-MODE'
'-m OCTAL-MODE'
Set the mode of the non-traces output to OCTAL-MODE; by default
'0666'.
As another additional feature over 'm4', 'autom4te' caches its
results. GNU M4 is able to produce a regular output and traces at the
same time. Traces are heavily used in the GNU Build System:
'autoheader' uses them to build 'config.h.in', 'autoreconf' to determine
what GNU Build System components are used, 'automake' to "parse"
'configure.ac' etc. To avoid recomputation, traces are cached while
performing regular expansion, and conversely. This cache is (actually,
the caches are) stored in the directory 'autom4te.cache'. _It can
safely be removed_ at any moment (especially if for some reason
'autom4te' considers it trashed).
'--cache=DIRECTORY'
'-C DIRECTORY'
Specify the name of the directory where the result should be
cached. Passing an empty value disables caching. Be sure to pass
a relative file name, as for the time being, global caches are not
supported.
'--no-cache'
Don't cache the results.
'--force'
'-f'
If a cache is used, consider it obsolete (but update it anyway).
Because traces are so important to the GNU Build System, 'autom4te'
provides high level tracing features as compared to M4, and helps
exploiting the cache:
'--trace=MACRO[:FORMAT]'
'-t MACRO[:FORMAT]'
Trace the invocations of MACRO according to the FORMAT. Multiple
'--trace' arguments can be used to list several macros. Multiple
'--trace' arguments for a single macro are not cumulative; instead,
you should just make FORMAT as long as needed.
The FORMAT is a regular string, with newlines if desired, and
several special escape codes. It defaults to '$f:$l:$n:$%'. It
can use the following special escapes:
'$$'
The character '$'.
'$f'
The file name from which MACRO is called.
'$l'
The line number from which MACRO is called.
'$d'
The depth of the MACRO call. This is an M4 technical detail
that you probably don't want to know about.
'$n'
The name of the MACRO.
'$NUM'
The NUMth argument of the call to MACRO.
'$@'
'$SEP@'
'${SEPARATOR}@'
All the arguments passed to MACRO, separated by the character
SEP or the string SEPARATOR (',' by default). Each argument
is quoted, i.e., enclosed in a pair of square brackets.
'$*'
'$SEP*'
'${SEPARATOR}*'
As above, but the arguments are not quoted.
'$%'
'$SEP%'
'${SEPARATOR}%'
As above, but the arguments are not quoted, all new line
characters in the arguments are smashed, and the default
separator is ':'.
The escape '$%' produces single-line trace outputs (unless you
put newlines in the 'separator'), while '$@' and '$*' do not.
*Note autoconf Invocation::, for examples of trace uses.
'--preselect=MACRO'
'-p MACRO'
Cache the traces of MACRO, but do not enable traces. This is
especially important to save CPU cycles in the future. For
instance, when invoked, 'autoconf' preselects all the macros that
'autoheader', 'automake', 'autoreconf', etc., trace, so that
running 'm4' is not needed to trace them: the cache suffices. This
results in a huge speed-up.
Finally, 'autom4te' introduces the concept of "Autom4te libraries".
They consists in a powerful yet extremely simple feature: sets of
combined command line arguments:
'--language=LANGUAGE'
'-l LANGUAGE'
Use the LANGUAGE Autom4te library. Current languages include:
'M4sugar'
create M4sugar output.
'M4sh'
create M4sh executable shell scripts.
'Autotest'
create Autotest executable test suites.
'Autoconf-without-aclocal-m4'
create Autoconf executable configure scripts without reading
'aclocal.m4'.
'Autoconf'
create Autoconf executable configure scripts. This language
inherits all the characteristics of
'Autoconf-without-aclocal-m4' and additionally reads
'aclocal.m4'.
'--prepend-include=DIR'
'-B DIR'
Prepend directory DIR to the search path. This is used to include
the language-specific files before any third-party macros.
As an example, if Autoconf is installed in its default location,
'/usr/local', the command 'autom4te -l m4sugar foo.m4' is strictly
equivalent to the command:
autom4te --prepend-include /usr/local/share/autoconf \
m4sugar/m4sugar.m4f --warnings syntax foo.m4
Recursive expansion applies here: the command 'autom4te -l m4sh foo.m4'
is the same as 'autom4te --language M4sugar m4sugar/m4sh.m4f foo.m4',
i.e.:
autom4te --prepend-include /usr/local/share/autoconf \
m4sugar/m4sugar.m4f m4sugar/m4sh.m4f --mode 777 foo.m4
The definition of the languages is stored in 'autom4te.cfg'.
File: autoconf.info, Node: Customizing autom4te, Prev: autom4te Invocation, Up: Using autom4te
8.2.2 Customizing 'autom4te'
----------------------------
One can customize 'autom4te' via '~/.autom4te.cfg' (i.e., as found in
the user home directory), and './.autom4te.cfg' (i.e., as found in the
directory from which 'autom4te' is run). The order is first reading
'autom4te.cfg', then '~/.autom4te.cfg', then './.autom4te.cfg', and
finally the command line arguments.
In these text files, comments are introduced with '#', and empty
lines are ignored. Customization is performed on a per-language basis,
wrapped in between a 'begin-language: "LANGUAGE"', 'end-language:
"LANGUAGE"' pair.
Customizing a language stands for appending options (*note autom4te
Invocation::) to the current definition of the language. Options, and
more generally arguments, are introduced by 'args: ARGUMENTS'. You may
use the traditional shell syntax to quote the ARGUMENTS.
As an example, to disable Autoconf caches ('autom4te.cache')
globally, include the following lines in '~/.autom4te.cfg':
## ------------------ ##
## User Preferences. ##
## ------------------ ##
begin-language: "Autoconf-without-aclocal-m4"
args: --no-cache
end-language: "Autoconf-without-aclocal-m4"
File: autoconf.info, Node: Programming in M4sugar, Next: Debugging via autom4te, Prev: Using autom4te, Up: Programming in M4
8.3 Programming in M4sugar
==========================
M4 by itself provides only a small, but sufficient, set of all-purpose
macros. M4sugar introduces additional generic macros. Its name was
coined by Lars J. Aas: "Readability And Greater Understanding Stands 4
M4sugar".
M4sugar reserves the macro namespace '^_m4_' for internal use, and
the macro namespace '^m4_' for M4sugar macros. You should not define
your own macros into these namespaces.
* Menu:
* Redefined M4 Macros:: M4 builtins changed in M4sugar
* Diagnostic Macros:: Diagnostic messages from M4sugar
* Diversion support:: Diversions in M4sugar
* Conditional constructs:: Conditions in M4
* Looping constructs:: Iteration in M4
* Evaluation Macros:: More quotation and evaluation control
* Text processing Macros:: String manipulation in M4
* Number processing Macros:: Arithmetic computation in M4
* Set manipulation Macros:: Set manipulation in M4
* Forbidden Patterns:: Catching unexpanded macros
File: autoconf.info, Node: Redefined M4 Macros, Next: Diagnostic Macros, Up: Programming in M4sugar
8.3.1 Redefined M4 Macros
-------------------------
With a few exceptions, all the M4 native macros are moved in the 'm4_'
pseudo-namespace, e.g., M4sugar renames 'define' as 'm4_define' etc.
The list of macros unchanged from M4, except for their name, is:
- m4_builtin
- m4_changecom
- m4_changequote
- m4_debugfile
- m4_debugmode
- m4_decr
- m4_define
- m4_divnum
- m4_errprint
- m4_esyscmd
- m4_eval
- m4_format
- m4_ifdef
- m4_incr
- m4_index
- m4_indir
- m4_len
- m4_pushdef
- m4_shift
- m4_substr
- m4_syscmd
- m4_sysval
- m4_traceoff
- m4_traceon
- m4_translit
Some M4 macros are redefined, and are slightly incompatible with
their native equivalent.
-- Macro: __file__
-- Macro: __line__
All M4 macros starting with '__' retain their original name: for
example, no 'm4__file__' is defined.
-- Macro: __oline__
This is not technically a macro, but a feature of Autom4te. The
sequence '__oline__' can be used similarly to the other m4sugar
location macros, but rather than expanding to the location of the
input file, it is translated to the line number where it appears in
the output file after all other M4 expansions.
-- Macro: dnl
This macro kept its original name: no 'm4_dnl' is defined.
-- Macro: m4_bpatsubst (STRING, REGEXP, [REPLACEMENT])
This macro corresponds to 'patsubst'. The name 'm4_patsubst' is
kept for future versions of M4sugar, once GNU M4 2.0 is released
and supports extended regular expression syntax.
-- Macro: m4_bregexp (STRING, REGEXP, [REPLACEMENT])
This macro corresponds to 'regexp'. The name 'm4_regexp' is kept
for future versions of M4sugar, once GNU M4 2.0 is released and
supports extended regular expression syntax.
-- Macro: m4_copy (SOURCE, DEST)
-- Macro: m4_copy_force (SOURCE, DEST)
-- Macro: m4_rename (SOURCE, DEST)
-- Macro: m4_rename_force (SOURCE, DEST)
These macros aren't directly builtins, but are closely related to
'm4_pushdef' and 'm4_defn'. 'm4_copy' and 'm4_rename' ensure that
DEST is undefined, while 'm4_copy_force' and 'm4_rename_force'
overwrite any existing definition. All four macros then proceed to
copy the entire pushdef stack of definitions of SOURCE over to
DEST. 'm4_copy' and 'm4_copy_force' preserve the source (including
in the special case where SOURCE is undefined), while 'm4_rename'
and 'm4_rename_force' undefine the original macro name (making it
an error to rename an undefined SOURCE).
Note that attempting to invoke a renamed macro might not work,
since the macro may have a dependence on helper macros accessed via
composition of '$0' but that were not also renamed; likewise, other
macros may have a hard-coded dependence on SOURCE and could break
if SOURCE has been deleted. On the other hand, it is always safe
to rename a macro to temporarily move it out of the way, then
rename it back later to restore original semantics.
-- Macro: m4_defn (MACRO...)
This macro fails if MACRO is not defined, even when using older
versions of M4 that did not warn. See 'm4_undefine'.
Unfortunately, in order to support these older versions of M4,
there are some situations involving unbalanced quotes where
concatenating multiple macros together will work in newer M4 but
not in m4sugar; use quadrigraphs to work around this.
-- Macro: m4_divert (DIVERSION)
M4sugar relies heavily on diversions, so rather than behaving as a
primitive, 'm4_divert' behaves like:
m4_divert_pop()m4_divert_push([DIVERSION])
*Note Diversion support::, for more details about the use of the
diversion stack. In particular, this implies that DIVERSION should
be a named diversion rather than a raw number. But be aware that
it is seldom necessary to explicitly change the diversion stack,
and that when done incorrectly, it can lead to syntactically
invalid scripts.
-- Macro: m4_dumpdef (NAME...)
-- Macro: m4_dumpdefs (NAME...)
'm4_dumpdef' is like the M4 builtin, except that this version
requires at least one argument, output always goes to standard
error rather than the current debug file, no sorting is done on
multiple arguments, and an error is issued if any NAME is
undefined. 'm4_dumpdefs' is a convenience macro that calls
'm4_dumpdef' for all of the 'm4_pushdef' stack of definitions,
starting with the current, and silently does nothing if NAME is
undefined.
Unfortunately, due to a limitation in M4 1.4.x, any macro defined
as a builtin is output as the empty string. This behavior is
rectified by using M4 1.6 or newer. However, this behavior
difference means that 'm4_dumpdef' should only be used while
developing m4sugar macros, and never in the final published form of
a macro.
-- Macro: m4_esyscmd_s (COMMAND)
Like 'm4_esyscmd', this macro expands to the result of running
COMMAND in a shell. The difference is that any trailing newlines
are removed, so that the output behaves more like shell command
substitution.
-- Macro: m4_exit (EXIT-STATUS)
This macro corresponds to 'm4exit'.
-- Macro: m4_if (COMMENT)
-- Macro: m4_if (STRING-1, STRING-2, EQUAL, [NOT-EQUAL])
-- Macro: m4_if (STRING-1, STRING-2, EQUAL-1, STRING-3, STRING-4,
EQUAL-2, ..., [NOT-EQUAL])
This macro corresponds to 'ifelse'. STRING-1 and STRING-2 are
compared literally, so usually one of the two arguments is passed
unquoted. *Note Conditional constructs::, for more conditional
idioms.
-- Macro: m4_include (FILE)
-- Macro: m4_sinclude (FILE)
Like the M4 builtins, but warn against multiple inclusions of FILE.
-- Macro: m4_mkstemp (TEMPLATE)
-- Macro: m4_maketemp (TEMPLATE)
Posix requires 'maketemp' to replace the trailing 'X' characters in
TEMPLATE with the process id, without regards to the existence of a
file by that name, but this a security hole. When this was pointed
out to the Posix folks, they agreed to invent a new macro 'mkstemp'
that always creates a uniquely named file, but not all versions of
GNU M4 support the new macro. In M4sugar, 'm4_maketemp' and
'm4_mkstemp' are synonyms for each other, and both have the secure
semantics regardless of which macro the underlying M4 provides.
-- Macro: m4_popdef (MACRO...)
This macro fails if MACRO is not defined, even when using older
versions of M4 that did not warn. See 'm4_undefine'.
-- Macro: m4_undefine (MACRO...)
This macro fails if MACRO is not defined, even when using older
versions of M4 that did not warn. Use
m4_ifdef([MACRO], [m4_undefine([MACRO])])
if you are not sure whether MACRO is defined.
-- Macro: m4_undivert (DIVERSION...)
Unlike the M4 builtin, at least one DIVERSION must be specified.
Also, since the M4sugar diversion stack prefers named diversions,
the use of 'm4_undivert' to include files is risky. *Note
Diversion support::, for more details about the use of the
diversion stack. But be aware that it is seldom necessary to
explicitly change the diversion stack, and that when done
incorrectly, it can lead to syntactically invalid scripts.
-- Macro: m4_wrap (TEXT)
-- Macro: m4_wrap_lifo (TEXT)
These macros correspond to 'm4wrap'. Posix requires arguments of
multiple wrap calls to be reprocessed at EOF in the same order as
the original calls (first-in, first-out). GNU M4 versions through
1.4.10, however, reprocess them in reverse order (last-in,
first-out). Both orders are useful, therefore, you can rely on
'm4_wrap' to provide FIFO semantics and 'm4_wrap_lifo' for LIFO
semantics, regardless of the underlying GNU M4 version.
Unlike the GNU M4 builtin, these macros only recognize one
argument, and avoid token pasting between consecutive invocations.
On the other hand, nested calls to 'm4_wrap' from within wrapped
text work just as in the builtin.
File: autoconf.info, Node: Diagnostic Macros, Next: Diversion support, Prev: Redefined M4 Macros, Up: Programming in M4sugar
8.3.2 Diagnostic messages from M4sugar
--------------------------------------
When macros statically diagnose abnormal situations, benign or fatal,
they should report them using these macros. For issuing dynamic issues,
i.e., when 'configure' is run, see *note Printing Messages::.
-- Macro: m4_assert (EXPRESSION, [EXIT-STATUS = 1])
Assert that the arithmetic EXPRESSION evaluates to non-zero.
Otherwise, issue a fatal error, and exit 'autom4te' with
EXIT-STATUS.
-- Macro: m4_errprintn (MESSAGE)
Similar to the builtin 'm4_errprint', except that a newline is
guaranteed after MESSAGE.
-- Macro: m4_fatal (MESSAGE)
Report a severe error MESSAGE prefixed with the current location,
and have 'autom4te' die.
-- Macro: m4_location
Useful as a prefix in a message line. Short for:
__file__:__line__
-- Macro: m4_warn (CATEGORY, MESSAGE)
Report MESSAGE as a warning (or as an error if requested by the
user) if warnings of the CATEGORY are turned on. If the message is
emitted, it is prefixed with the current location, and followed by
a call trace of all macros defined via 'AC_DEFUN' used to get to
the current expansion. You are encouraged to use standard
categories, which currently include:
'all'
messages that don't fall into one of the following categories.
Use of an empty CATEGORY is equivalent.
'cross'
related to cross compilation issues.
'obsolete'
use of an obsolete construct.
'syntax'
dubious syntactic constructs, incorrectly ordered macro calls.
File: autoconf.info, Node: Diversion support, Next: Conditional constructs, Prev: Diagnostic Macros, Up: Programming in M4sugar
8.3.3 Diversion support
-----------------------
M4sugar makes heavy use of diversions under the hood, because it is
often the case that text that must appear early in the output is not
discovered until late in the input. Additionally, some of the
topological sorting algorithms used in resolving macro dependencies use
diversions. However, most macros should not need to change diversions
directly, but rather rely on higher-level M4sugar macros to manage
diversions transparently. If you change diversions improperly, you risk
generating a syntactically invalid script, because an incorrect
diversion will violate assumptions made by many macros about whether
prerequisite text has been previously output. In short, if you manually
change the diversion, you should not expect any macros provided by the
Autoconf package to work until you have restored the diversion stack
back to its original state.
In the rare case that it is necessary to write a macro that
explicitly outputs text to a different diversion, it is important to be
aware of an M4 limitation regarding diversions: text only goes to a
diversion if it is not part of argument collection. Therefore, any
macro that changes the current diversion cannot be used as an unquoted
argument to another macro, but must be expanded at the top level. The
macro 'm4_expand' will diagnose any attempt to change diversions, since
it is generally useful only as an argument to another macro. The
following example shows what happens when diversion manipulation is
attempted within macro arguments:
m4_do([normal text]
m4_divert_push([KILL])unwanted[]m4_divert_pop([KILL])
[m4_divert_push([KILL])discarded[]m4_divert_pop([KILL])])dnl
=>normal text
=>unwanted
Notice that the unquoted text 'unwanted' is output, even though it was
processed while the current diversion was 'KILL', because it was
collected as part of the argument to 'm4_do'. However, the text
'discarded' disappeared as desired, because the diversion changes were
single-quoted, and were not expanded until the top-level rescan of the
output of 'm4_do'.
To make diversion management easier, M4sugar uses the concept of
named diversions. Rather than using diversion numbers directly, it is
nicer to associate a name with each diversion. The diversion number
associated with a particular diversion name is an implementation detail,
and a syntax warning is issued if a diversion number is used instead of
a name. In general, you should not output text to a named diversion
until after calling the appropriate initialization routine for your
language ('m4_init', 'AS_INIT', 'AT_INIT', ...), although there are some
exceptions documented below.
M4sugar defines two named diversions.
'KILL'
Text written to this diversion is discarded. This is the default
diversion once M4sugar is initialized.
'GROW'
This diversion is used behind the scenes by topological sorting
macros, such as 'AC_REQUIRE'.
M4sh adds several more named diversions.
'BINSH'
This diversion is reserved for the '#!' interpreter line.
'HEADER-REVISION'
This diversion holds text from 'AC_REVISION'.
'HEADER-COMMENT'
This diversion holds comments about the purpose of a file.
'HEADER-COPYRIGHT'
This diversion is managed by 'AC_COPYRIGHT'.
'M4SH-SANITIZE'
This diversion contains M4sh sanitization code, used to ensure M4sh
is executing in a reasonable shell environment.
'M4SH-INIT'
This diversion contains M4sh initialization code, initializing
variables that are required by other M4sh macros.
'BODY'
This diversion contains the body of the shell code, and is the
default diversion once M4sh is initialized.
Autotest inherits diversions from M4sh, and changes the default
diversion from 'BODY' back to 'KILL'. It also adds several more named
diversions, with the following subset designed for developer use.
'PREPARE_TESTS'
This diversion contains initialization sequences which are executed
after 'atconfig' and 'atlocal', and after all command line
arguments have been parsed, but prior to running any tests. It can
be used to set up state that is required across all tests. This
diversion will work even before 'AT_INIT'.
Autoconf inherits diversions from M4sh, and adds the following named
diversions which developers can utilize.
'DEFAULTS'
This diversion contains shell variable assignments to set defaults
that must be in place before arguments are parsed. This diversion
is placed early enough in 'configure' that it is unsafe to expand
any autoconf macros into this diversion.
'HELP_ENABLE'
If 'AC_PRESERVE_HELP_ORDER' was used, then text placed in this
diversion will be included as part of a quoted here-doc providing
all of the '--help' output of 'configure' related to options
created by 'AC_ARG_WITH' and 'AC_ARG_ENABLE'.
'INIT_PREPARE'
This diversion occurs after all command line options have been
parsed, but prior to the main body of the 'configure' script. This
diversion is the last chance to insert shell code such as variable
assignments or shell function declarations that will used by the
expansion of other macros.
For now, the remaining named diversions of Autoconf, Autoheader, and
Autotest are not documented. In other words, intentionally outputting
text into an undocumented diversion is subject to breakage in a future
release of Autoconf.
-- Macro: m4_cleardivert (DIVERSION...)
Permanently discard any text that has been diverted into DIVERSION.
-- Macro: m4_divert_once (DIVERSION, [CONTENT])
Similar to 'm4_divert_text', except that CONTENT is only output to
DIVERSION if this is the first time that 'm4_divert_once' has been
called with its particular arguments.
-- Macro: m4_divert_pop ([DIVERSION])
If provided, check that the current diversion is indeed DIVERSION.
Then change to the diversion located earlier on the stack, giving
an error if an attempt is made to pop beyond the initial m4sugar
diversion of 'KILL'.
-- Macro: m4_divert_push (DIVERSION)
Remember the former diversion on the diversion stack, and output
subsequent text into DIVERSION. M4sugar maintains a diversion
stack, and issues an error if there is not a matching pop for every
push.
-- Macro: m4_divert_text (DIVERSION, [CONTENT])
Output CONTENT and a newline into DIVERSION, without affecting the
current diversion. Shorthand for:
m4_divert_push([DIVERSION])CONTENT
m4_divert_pop([DIVERSION])dnl
One use of 'm4_divert_text' is to develop two related macros, where
macro 'MY_A' does the work, but adjusts what work is performed
based on whether the optional macro 'MY_B' has also been expanded.
Of course, it is possible to use 'AC_BEFORE' within 'MY_A' to
require that 'MY_B' occurs first, if it occurs at all. But this
imposes an ordering restriction on the user; it would be nicer if
macros 'MY_A' and 'MY_B' can be invoked in either order. The trick
is to let 'MY_B' leave a breadcrumb in an early diversion, which
'MY_A' can then use to determine whether 'MY_B' has been expanded.
AC_DEFUN([MY_A],
[# various actions
if test -n "$b_was_used"; then
# extra action
fi])
AC_DEFUN([MY_B],
[AC_REQUIRE([MY_A])dnl
m4_divert_text([INIT_PREPARE], [b_was_used=true])])
-- Macro: m4_init
Initialize the M4sugar environment, setting up the default named
diversion to be 'KILL'.
File: autoconf.info, Node: Conditional constructs, Next: Looping constructs, Prev: Diversion support, Up: Programming in M4sugar
8.3.4 Conditional constructs
----------------------------
The following macros provide additional conditional constructs as
convenience wrappers around 'm4_if'.
-- Macro: m4_bmatch (STRING, REGEX-1, VALUE-1, [REGEX-2], [VALUE-2],
..., [DEFAULT])
The string STRING is repeatedly compared against a series of REGEX
arguments; if a match is found, the expansion is the corresponding
VALUE, otherwise, the macro moves on to the next REGEX. If no
REGEX match, then the result is the optional DEFAULT, or nothing.
-- Macro: m4_bpatsubsts (STRING, REGEX-1, SUBST-1, [REGEX-2],
[SUBST-2], ...)
The string STRING is altered by REGEX-1 and SUBST-1, as if by:
m4_bpatsubst([[STRING]], [REGEX], [SUBST])
The result of the substitution is then passed through the next set
of REGEX and SUBST, and so forth. An empty SUBST implies deletion
of any matched portions in the current string. Note that this
macro over-quotes STRING; this behavior is intentional, so that the
result of each step of the recursion remains as a quoted string.
However, it means that anchors ('^' and '$' in the REGEX will line
up with the extra quotations, and not the characters of the
original string. The overquoting is removed after the final
substitution.
-- Macro: m4_case (STRING, VALUE-1, IF-VALUE-1, [VALUE-2],
[IF-VALUE-2], ..., [DEFAULT])
Test STRING against multiple VALUE possibilities, resulting in the
first IF-VALUE for a match, or in the optional DEFAULT. This is
shorthand for:
m4_if([STRING], [VALUE-1], [IF-VALUE-1],
[STRING], [VALUE-2], [IF-VALUE-2], ...,
[DEFAULT])
-- Macro: m4_cond (TEST-1, VALUE-1, IF-VALUE-1, [TEST-2], [VALUE-2],
[IF-VALUE-2], ..., [DEFAULT])
This macro was introduced in Autoconf 2.62. Similar to 'm4_if',
except that each TEST is expanded only when it is encountered.
This is useful for short-circuiting expensive tests; while 'm4_if'
requires all its strings to be expanded up front before doing
comparisons, 'm4_cond' only expands a TEST when all earlier tests
have failed.
For an example, these two sequences give the same result, but in
the case where '$1' does not contain a backslash, the 'm4_cond'
version only expands 'm4_index' once, instead of five times, for
faster computation if this is a common case for '$1'. Notice that
every third argument is unquoted for 'm4_if', and quoted for
'm4_cond':
m4_if(m4_index([$1], [\]), [-1], [$2],
m4_eval(m4_index([$1], [\\]) >= 0), [1], [$2],
m4_eval(m4_index([$1], [\$]) >= 0), [1], [$2],
m4_eval(m4_index([$1], [\`]) >= 0), [1], [$3],
m4_eval(m4_index([$1], [\"]) >= 0), [1], [$3],
[$2])
m4_cond([m4_index([$1], [\])], [-1], [$2],
[m4_eval(m4_index([$1], [\\]) >= 0)], [1], [$2],
[m4_eval(m4_index([$1], [\$]) >= 0)], [1], [$2],
[m4_eval(m4_index([$1], [\`]) >= 0)], [1], [$3],
[m4_eval(m4_index([$1], [\"]) >= 0)], [1], [$3],
[$2])
-- Macro: m4_default (EXPR-1, EXPR-2)
-- Macro: m4_default_quoted (EXPR-1, EXPR-2)
-- Macro: m4_default_nblank (EXPR-1, [EXPR-2])
-- Macro: m4_default_nblank_quoted (EXPR-1, [EXPR-2])
If EXPR-1 contains text, use it. Otherwise, select EXPR-2.
'm4_default' expands the result, while 'm4_default_quoted' does
not. Useful for providing a fixed default if the expression that
results in EXPR-1 would otherwise be empty. The difference between
'm4_default' and 'm4_default_nblank' is whether an argument
consisting of just blanks (space, tab, newline) is significant.
When using the expanding versions, note that an argument may
contain text but still expand to an empty string.
m4_define([active], [ACTIVE])dnl
m4_define([empty], [])dnl
m4_define([demo1], [m4_default([$1], [$2])])dnl
m4_define([demo2], [m4_default_quoted([$1], [$2])])dnl
m4_define([demo3], [m4_default_nblank([$1], [$2])])dnl
m4_define([demo4], [m4_default_nblank_quoted([$1], [$2])])dnl
demo1([active], [default])
=>ACTIVE
demo1([], [active])
=>ACTIVE
demo1([empty], [text])
=>
-demo1([ ], [active])-
=>- -
demo2([active], [default])
=>active
demo2([], [active])
=>active
demo2([empty], [text])
=>empty
-demo2([ ], [active])-
=>- -
demo3([active], [default])
=>ACTIVE
demo3([], [active])
=>ACTIVE
demo3([empty], [text])
=>
-demo3([ ], [active])-
=>-ACTIVE-
demo4([active], [default])
=>active
demo4([], [active])
=>active
demo4([empty], [text])
=>empty
-demo4([ ], [active])-
=>-active-
-- Macro: m4_define_default (MACRO, [DEFAULT-DEFINITION])
If MACRO does not already have a definition, then define it to
DEFAULT-DEFINITION.
-- Macro: m4_ifblank (COND, [IF-BLANK], [IF-TEXT])
-- Macro: m4_ifnblank (COND, [IF-TEXT], [IF-BLANK])
If COND is empty or consists only of blanks (space, tab, newline),
then expand IF-BLANK; otherwise, expand IF-TEXT. Two variants
exist, in order to make it easier to select the correct logical
sense when using only two parameters. Note that this is more
efficient than the equivalent behavior of:
m4_ifval(m4_normalize([COND]), IF-TEXT, IF-BLANK)
-- Macro: m4_ifndef (MACRO, IF-NOT-DEFINED, [IF-DEFINED])
This is shorthand for:
m4_ifdef([MACRO], [IF-DEFINED], [IF-NOT-DEFINED])
-- Macro: m4_ifset (MACRO, [IF-TRUE], [IF-FALSE])
If MACRO is undefined, or is defined as the empty string, expand to
IF-FALSE. Otherwise, expands to IF-TRUE. Similar to:
m4_ifval(m4_defn([MACRO]), [IF-TRUE], [IF-FALSE])
except that it is not an error if MACRO is undefined.
-- Macro: m4_ifval (COND, [IF-TRUE], [IF-FALSE])
Expands to IF-TRUE if COND is not empty, otherwise to IF-FALSE.
This is shorthand for:
m4_if([COND], [], [IF-FALSE], [IF-TRUE])
-- Macro: m4_ifvaln (COND, [IF-TRUE], [IF-FALSE])
Similar to 'm4_ifval', except guarantee that a newline is present
after any non-empty expansion. Often followed by 'dnl'.
-- Macro: m4_n (TEXT)
Expand to TEXT, and add a newline if TEXT is not empty. Often
followed by 'dnl'.
File: autoconf.info, Node: Looping constructs, Next: Evaluation Macros, Prev: Conditional constructs, Up: Programming in M4sugar
8.3.5 Looping constructs
------------------------
The following macros are useful in implementing recursive algorithms in
M4, including loop operations. An M4 list is formed by quoting a list
of quoted elements; generally the lists are comma-separated, although
'm4_foreach_w' is whitespace-separated. For example, the list '[[a],
[b,c]]' contains two elements: '[a]' and '[b,c]'. It is common to see
lists with unquoted elements when those elements are not likely to be
macro names, as in '[fputc_unlocked, fgetc_unlocked]'.
Although not generally recommended, it is possible for quoted lists
to have side effects; all side effects are expanded only once, and prior
to visiting any list element. On the other hand, the fact that unquoted
macros are expanded exactly once means that macros without side effects
can be used to generate lists. For example,
m4_foreach([i], [[1], [2], [3]m4_errprintn([hi])], [i])
error->hi
=>123
m4_define([list], [[1], [2], [3]])
=>
m4_foreach([i], [list], [i])
=>123
-- Macro: m4_argn (N, [ARG]...)
Extracts argument N (larger than 0) from the remaining arguments.
If there are too few arguments, the empty string is used. For any
N besides 1, this is more efficient than the similar
'm4_car(m4_shiftn([N], [], [ARG...]))'.
-- Macro: m4_car (ARG...)
Expands to the quoted first ARG. Can be used with 'm4_cdr' to
recursively iterate through a list. Generally, when using quoted
lists of quoted elements, 'm4_car' should be called without any
extra quotes.
-- Macro: m4_cdr (ARG...)
Expands to a quoted list of all but the first ARG, or the empty
string if there was only one argument. Generally, when using
quoted lists of quoted elements, 'm4_cdr' should be called without
any extra quotes.
For example, this is a simple implementation of 'm4_map'; note how
each iteration checks for the end of recursion, then merely applies
the first argument to the first element of the list, then repeats
with the rest of the list. (The actual implementation in M4sugar
is a bit more involved, to gain some speed and share code with
'm4_map_sep', and also to avoid expanding side effects in '$2'
twice).
m4_define([m4_map], [m4_ifval([$2],
[m4_apply([$1], m4_car($2))[]$0([$1], m4_cdr($2))])])dnl
m4_map([ m4_eval], [[[1]], [[1+1]], [[10],[16]]])
=> 1 2 a
-- Macro: m4_for (VAR, FIRST, LAST, [STEP], EXPRESSION)
Loop over the numeric values between FIRST and LAST including
bounds by increments of STEP. For each iteration, expand
EXPRESSION with the numeric value assigned to VAR. If STEP is
omitted, it defaults to '1' or '-1' depending on the order of the
limits. If given, STEP has to match this order. The number of
iterations is determined independently from definition of VAR;
iteration cannot be short-circuited or lengthened by modifying VAR
from within EXPRESSION.
-- Macro: m4_foreach (VAR, LIST, EXPRESSION)
Loop over the comma-separated M4 list LIST, assigning each value to
VAR, and expand EXPRESSION. The following example outputs two
lines:
m4_foreach([myvar], [[foo], [bar, baz]],
[echo myvar
])dnl
=>echo foo
=>echo bar, baz
Note that for some forms of EXPRESSION, it may be faster to use
'm4_map_args'.
-- Macro: m4_foreach_w (VAR, LIST, EXPRESSION)
Loop over the white-space-separated list LIST, assigning each value
to VAR, and expand EXPRESSION. If VAR is only referenced once in
EXPRESSION, it is more efficient to use 'm4_map_args_w'.
The deprecated macro 'AC_FOREACH' is an alias of 'm4_foreach_w'.
-- Macro: m4_map (MACRO, LIST)
-- Macro: m4_mapall (MACRO, LIST)
-- Macro: m4_map_sep (MACRO, SEPARATOR, LIST)
-- Macro: m4_mapall_sep (MACRO, SEPARATOR, LIST)
Loop over the comma separated quoted list of argument descriptions
in LIST, and invoke MACRO with the arguments. An argument
description is in turn a comma-separated quoted list of quoted
elements, suitable for 'm4_apply'. The macros 'm4_map' and
'm4_map_sep' ignore empty argument descriptions, while 'm4_mapall'
and 'm4_mapall_sep' invoke MACRO with no arguments. The macros
'm4_map_sep' and 'm4_mapall_sep' additionally expand SEPARATOR
between invocations of MACRO.
Note that SEPARATOR is expanded, unlike in 'm4_join'. When
separating output with commas, this means that the map result can
be used as a series of arguments, by using a single-quoted comma as
SEPARATOR, or as a single string, by using a double-quoted comma.
m4_map([m4_count], [])
=>
m4_map([ m4_count], [[],
[[1]],
[[1], [2]]])
=> 1 2
m4_mapall([ m4_count], [[],
[[1]],
[[1], [2]]])
=> 0 1 2
m4_map_sep([m4_eval], [,], [[[1+2]],
[[10], [16]]])
=>3,a
m4_map_sep([m4_echo], [,], [[[a]], [[b]]])
=>a,b
m4_count(m4_map_sep([m4_echo], [,], [[[a]], [[b]]]))
=>2
m4_map_sep([m4_echo], [[,]], [[[a]], [[b]]])
=>a,b
m4_count(m4_map_sep([m4_echo], [[,]], [[[a]], [[b]]]))
=>1
-- Macro: m4_map_args (MACRO, ARG...)
Repeatedly invoke MACRO with each successive ARG as its only
argument. In the following example, three solutions are presented
with the same expansion; the solution using 'm4_map_args' is the
most efficient.
m4_define([active], [ACTIVE])dnl
m4_foreach([var], [[plain], [active]], [ m4_echo(m4_defn([var]))])
=> plain active
m4_map([ m4_echo], [[[plain]], [[active]]])
=> plain active
m4_map_args([ m4_echo], [plain], [active])
=> plain active
In cases where it is useful to operate on additional parameters
besides the list elements, the macro 'm4_curry' can be used in
MACRO to supply the argument currying necessary to generate the
desired argument list. In the following example, 'list_add_n' is
more efficient than 'list_add_x'. On the other hand, using
'm4_map_args_sep' can be even more efficient.
m4_define([list], [[1], [2], [3]])dnl
m4_define([add], [m4_eval(([$1]) + ([$2]))])dnl
dnl list_add_n(N, ARG...)
dnl Output a list consisting of each ARG added to N
m4_define([list_add_n],
[m4_shift(m4_map_args([,m4_curry([add], [$1])], m4_shift($@)))])dnl
list_add_n([1], list)
=>2,3,4
list_add_n([2], list)
=>3,4,5
m4_define([list_add_x],
[m4_shift(m4_foreach([var], m4_dquote(m4_shift($@)),
[,add([$1],m4_defn([var]))]))])dnl
list_add_x([1], list)
=>2,3,4
-- Macro: m4_map_args_pair (MACRO, [MACRO-END = macro], ARG...)
For every pair of arguments ARG, invoke MACRO with two arguments.
If there is an odd number of arguments, invoke MACRO-END, which
defaults to MACRO, with the remaining argument.
m4_map_args_pair([, m4_reverse], [], [1], [2], [3])
=>, 2, 1, 3
m4_map_args_pair([, m4_reverse], [, m4_dquote], [1], [2], [3])
=>, 2, 1, [3]
m4_map_args_pair([, m4_reverse], [, m4_dquote], [1], [2], [3], [4])
=>, 2, 1, 4, 3
-- Macro: m4_map_args_sep ([PRE], [POST], [SEP], ARG...)
Expand the sequence 'PRE[ARG]POST' for each argument, additionally
expanding SEP between arguments. One common use of this macro is
constructing a macro call, where the opening and closing
parentheses are split between PRE and POST; in particular,
'm4_map_args([MACRO], [ARG])' is equivalent to
'm4_map_args_sep([MACRO(], [)], [], [ARG])'. This macro provides
the most efficient means for iterating over an arbitrary list of
arguments, particularly when repeatedly constructing a macro call
with more arguments than ARG.
-- Macro: m4_map_args_w (STRING, [PRE], [POST], [SEP])
Expand the sequence 'PRE[word]POST' for each word in the
whitespace-separated STRING, additionally expanding SEP between
words. This macro provides the most efficient means for iterating
over a whitespace-separated string. In particular,
'm4_map_args_w([STRING], [ACTION(], [)])' is more efficient than
'm4_foreach_w([var], [STRING], [ACTION(m4_defn([var]))])'.
-- Macro: m4_shiftn (COUNT, ...)
-- Macro: m4_shift2 (...)
-- Macro: m4_shift3 (...)
'm4_shiftn' performs COUNT iterations of 'm4_shift', along with
validation that enough arguments were passed in to match the shift
count, and that the count is positive. 'm4_shift2' and 'm4_shift3'
are specializations of 'm4_shiftn', introduced in Autoconf 2.62,
and are more efficient for two and three shifts, respectively.
-- Macro: m4_stack_foreach (MACRO, ACTION)
-- Macro: m4_stack_foreach_lifo (MACRO, ACTION)
For each of the 'm4_pushdef' definitions of MACRO, expand ACTION
with the single argument of a definition of MACRO.
'm4_stack_foreach' starts with the oldest definition, while
'm4_stack_foreach_lifo' starts with the current definition. ACTION
should not push or pop definitions of MACRO, nor is there any
guarantee that the current definition of MACRO matches the argument
that was passed to ACTION. The macro 'm4_curry' can be used if
ACTION needs more than one argument, although in that case it is
more efficient to use M4_STACK_FOREACH_SEP.
Due to technical limitations, there are a few low-level m4sugar
functions, such as 'm4_pushdef', that cannot be used as the MACRO
argument.
m4_pushdef([a], [1])m4_pushdef([a], [2])dnl
m4_stack_foreach([a], [ m4_incr])
=> 2 3
m4_stack_foreach_lifo([a], [ m4_curry([m4_substr], [abcd])])
=> cd bcd
-- Macro: m4_stack_foreach_sep (MACRO, [PRE], [POST], [SEP])
-- Macro: m4_stack_foreach_sep_lifo (MACRO, [PRE], [POST], [SEP])
Expand the sequence 'PRE[definition]POST' for each 'm4_pushdef'
definition of MACRO, additionally expanding SEP between
definitions. 'm4_stack_foreach_sep' visits the oldest definition
first, while 'm4_stack_foreach_sep_lifo' visits the current
definition first. This macro provides the most efficient means for
iterating over a pushdef stack. In particular,
'm4_stack_foreach([MACRO], [ACTION])' is short for
'm4_stack_foreach_sep([MACRO], [ACTION(], [)])'.
File: autoconf.info, Node: Evaluation Macros, Next: Text processing Macros, Prev: Looping constructs, Up: Programming in M4sugar
8.3.6 Evaluation Macros
-----------------------
The following macros give some control over the order of the evaluation
by adding or removing levels of quotes.
-- Macro: m4_apply (MACRO, LIST)
Apply the elements of the quoted, comma-separated LIST as the
arguments to MACRO. If LIST is empty, invoke MACRO without
arguments. Note the difference between 'm4_indir', which expects
its first argument to be a macro name but can use names that are
otherwise invalid, and 'm4_apply', where MACRO can contain other
text, but must end in a valid macro name.
m4_apply([m4_count], [])
=>0
m4_apply([m4_count], [[]])
=>1
m4_apply([m4_count], [[1], [2]])
=>2
m4_apply([m4_join], [[|], [1], [2]])
=>1|2
-- Macro: m4_count (ARG, ...)
This macro returns the decimal count of the number of arguments it
was passed.
-- Macro: m4_curry (MACRO, ARG...)
This macro performs argument currying. The expansion of this macro
is another macro name that expects exactly one argument; that
argument is then appended to the ARG list, and then MACRO is
expanded with the resulting argument list.
m4_curry([m4_curry], [m4_reverse], [1])([2])([3])
=>3, 2, 1
Unfortunately, due to a limitation in M4 1.4.x, it is not possible
to pass the definition of a builtin macro as the argument to the
output of 'm4_curry'; the empty string is used instead of the
builtin token. This behavior is rectified by using M4 1.6 or
newer.
-- Macro: m4_do (ARG, ...)
This macro loops over its arguments and expands each ARG in
sequence. Its main use is for readability; it allows the use of
indentation and fewer 'dnl' to result in the same expansion. This
macro guarantees that no expansion will be concatenated with
subsequent text; to achieve full concatenation, use
'm4_unquote(m4_join([], ARG...))'.
m4_define([ab],[1])m4_define([bc],[2])m4_define([abc],[3])dnl
m4_do([a],[b])c
=>abc
m4_unquote(m4_join([],[a],[b]))c
=>3
m4_define([a],[A])m4_define([b],[B])m4_define([c],[C])dnl
m4_define([AB],[4])m4_define([BC],[5])m4_define([ABC],[6])dnl
m4_do([a],[b])c
=>ABC
m4_unquote(m4_join([],[a],[b]))c
=>3
-- Macro: m4_dquote (ARG, ...)
Return the arguments as a quoted list of quoted arguments.
Conveniently, if there is just one ARG, this effectively adds a
level of quoting.
-- Macro: m4_dquote_elt (ARG, ...)
Return the arguments as a series of double-quoted arguments.
Whereas 'm4_dquote' returns a single argument, 'm4_dquote_elt'
returns as many arguments as it was passed.
-- Macro: m4_echo (ARG, ...)
Return the arguments, with the same level of quoting. Other than
discarding whitespace after unquoted commas, this macro is a no-op.
-- Macro: m4_expand (ARG)
Return the expansion of ARG as a quoted string. Whereas 'm4_quote'
is designed to collect expanded text into a single argument,
'm4_expand' is designed to perform one level of expansion on quoted
text. One distinction is in the treatment of whitespace following
a comma in the original ARG. Any time multiple arguments are
collected into one with 'm4_quote', the M4 argument collection
rules discard the whitespace. However, with 'm4_expand',
whitespace is preserved, even after the expansion of macros
contained in ARG. Additionally, 'm4_expand' is able to expand text
that would involve an unterminated comment, whereas expanding that
same text as the argument to 'm4_quote' runs into difficulty in
finding the end of the argument. Since manipulating diversions
during argument collection is inherently unsafe, 'm4_expand' issues
an error if ARG attempts to change the current diversion (*note
Diversion support::).
m4_define([active], [ACT, IVE])dnl
m4_define([active2], [[ACT, IVE]])dnl
m4_quote(active, active)
=>ACT,IVE,ACT,IVE
m4_expand([active, active])
=>ACT, IVE, ACT, IVE
m4_quote(active2, active2)
=>ACT, IVE,ACT, IVE
m4_expand([active2, active2])
=>ACT, IVE, ACT, IVE
m4_expand([# m4_echo])
=># m4_echo
m4_quote(# m4_echo)
)
=># m4_echo)
=>
Note that 'm4_expand' cannot handle an ARG that expands to literal
unbalanced quotes, but that quadrigraphs can be used when
unbalanced output is necessary. Likewise, unbalanced parentheses
should be supplied with double quoting or a quadrigraph.
m4_define([pattern], [[!@<:@]])dnl
m4_define([bar], [BAR])dnl
m4_expand([case $foo in
m4_defn([pattern])@:}@ bar ;;
*[)] blah ;;
esac])
=>case $foo in
=> [![]) BAR ;;
=> *) blah ;;
=>esac
-- Macro: m4_ignore (...)
This macro was introduced in Autoconf 2.62. Expands to nothing,
ignoring all of its arguments. By itself, this isn't very useful.
However, it can be used to conditionally ignore an arbitrary number
of arguments, by deciding which macro name to apply to a list of
arguments.
dnl foo outputs a message only if [debug] is defined.
m4_define([foo],
[m4_ifdef([debug],[AC_MSG_NOTICE],[m4_ignore])([debug message])])
Note that for earlier versions of Autoconf, the macro '__gnu__' can
serve the same purpose, although it is less readable.
-- Macro: m4_make_list (ARG, ...)
This macro exists to aid debugging of M4sugar algorithms. Its net
effect is similar to 'm4_dquote'--it produces a quoted list of
quoted arguments, for each ARG. The difference is that this
version uses a comma-newline separator instead of just comma, to
improve readability of the list; with the result that it is less
efficient than 'm4_dquote'.
m4_define([zero],[0])m4_define([one],[1])m4_define([two],[2])dnl
m4_dquote(zero, [one], [[two]])
=>[0],[one],[[two]]
m4_make_list(zero, [one], [[two]])
=>[0],
=>[one],
=>[[two]]
m4_foreach([number], m4_dquote(zero, [one], [[two]]), [ number])
=> 0 1 two
m4_foreach([number], m4_make_list(zero, [one], [[two]]), [ number])
=> 0 1 two
-- Macro: m4_quote (ARG, ...)
Return the arguments as a single entity, i.e., wrap them into a
pair of quotes. This effectively collapses multiple arguments into
one, although it loses whitespace after unquoted commas in the
process.
-- Macro: m4_reverse (ARG, ...)
Outputs each argument with the same level of quoting, but in
reverse order, and with space following each comma for readability.
m4_define([active], [ACT,IVE])
=>
m4_reverse(active, [active])
=>active, IVE, ACT
-- Macro: m4_unquote (ARG, ...)
This macro was introduced in Autoconf 2.62. Expand each argument,
separated by commas. For a single ARG, this effectively removes a
layer of quoting, and 'm4_unquote([ARG])' is more efficient than
the equivalent 'm4_do([ARG])'. For multiple arguments, this
results in an unquoted list of expansions. This is commonly used
with 'm4_split', in order to convert a single quoted list into a
series of quoted elements.
The following example aims at emphasizing the difference between
several scenarios: not using these macros, using 'm4_defn', using
'm4_quote', using 'm4_dquote', and using 'm4_expand'.
$ cat example.m4
dnl Overquote, so that quotes are visible.
m4_define([show], [$[]1 = [$1], $[]@ = [$@]])
m4_define([a], [A])
m4_define([mkargs], [1, 2[,] 3])
m4_define([arg1], [[$1]])
m4_divert([0])dnl
show(a, b)
show([a, b])
show(m4_quote(a, b))
show(m4_dquote(a, b))
show(m4_expand([a, b]))
arg1(mkargs)
arg1([mkargs])
arg1(m4_defn([mkargs]))
arg1(m4_quote(mkargs))
arg1(m4_dquote(mkargs))
arg1(m4_expand([mkargs]))
$ autom4te -l m4sugar example.m4
$1 = A, $@ = [A],[b]
$1 = a, b, $@ = [a, b]
$1 = A,b, $@ = [A,b]
$1 = [A],[b], $@ = [[A],[b]]
$1 = A, b, $@ = [A, b]
1
mkargs
1, 2[,] 3
1,2, 3
[1],[2, 3]
1, 2, 3
File: autoconf.info, Node: Text processing Macros, Next: Number processing Macros, Prev: Evaluation Macros, Up: Programming in M4sugar
8.3.7 String manipulation in M4
-------------------------------
The following macros may be used to manipulate strings in M4. Many of
the macros in this section intentionally result in quoted strings as
output, rather than subjecting the arguments to further expansions. As
a result, if you are manipulating text that contains active M4
characters, the arguments are passed with single quoting rather than
double.
-- Macro: m4_append (MACRO-NAME, STRING, [SEPARATOR])
-- Macro: m4_append_uniq (MACRO-NAME, STRING, [SEPARATOR] [IF-UNIQ],
[IF-DUPLICATE])
Redefine MACRO-NAME to its former contents with SEPARATOR and
STRING added at the end. If MACRO-NAME was undefined before (but
not if it was defined but empty), then no SEPARATOR is added. As
of Autoconf 2.62, neither STRING nor SEPARATOR are expanded during
this macro; instead, they are expanded when MACRO-NAME is invoked.
'm4_append' can be used to grow strings, and 'm4_append_uniq' to
grow strings without duplicating substrings. Additionally,
'm4_append_uniq' takes two optional parameters as of Autoconf 2.62;
IF-UNIQ is expanded if STRING was appended, and IF-DUPLICATE is
expanded if STRING was already present. Also, 'm4_append_uniq'
warns if SEPARATOR is not empty, but occurs within STRING, since
that can lead to duplicates.
Note that 'm4_append' can scale linearly in the length of the final
string, depending on the quality of the underlying M4
implementation, while 'm4_append_uniq' has an inherent quadratic
scaling factor. If an algorithm can tolerate duplicates in the
final string, use the former for speed. If duplicates must be
avoided, consider using 'm4_set_add' instead (*note Set
manipulation Macros::).
m4_define([active], [ACTIVE])dnl
m4_append([sentence], [This is an])dnl
m4_append([sentence], [ active ])dnl
m4_append([sentence], [symbol.])dnl
sentence
=>This is an ACTIVE symbol.
m4_undefine([active])dnl
=>This is an active symbol.
m4_append_uniq([list], [one], [, ], [new], [existing])
=>new
m4_append_uniq([list], [one], [, ], [new], [existing])
=>existing
m4_append_uniq([list], [two], [, ], [new], [existing])
=>new
m4_append_uniq([list], [three], [, ], [new], [existing])
=>new
m4_append_uniq([list], [two], [, ], [new], [existing])
=>existing
list
=>one, two, three
m4_dquote(list)
=>[one],[two],[three]
m4_append([list2], [one], [[, ]])dnl
m4_append_uniq([list2], [two], [[, ]])dnl
m4_append([list2], [three], [[, ]])dnl
list2
=>one, two, three
m4_dquote(list2)
=>[one, two, three]
-- Macro: m4_append_uniq_w (MACRO-NAME, STRINGS)
This macro was introduced in Autoconf 2.62. It is similar to
'm4_append_uniq', but treats STRINGS as a whitespace separated list
of words to append, and only appends unique words. MACRO-NAME is
updated with a single space between new words.
m4_append_uniq_w([numbers], [1 1 2])dnl
m4_append_uniq_w([numbers], [ 2 3 ])dnl
numbers
=>1 2 3
-- Macro: m4_chomp (STRING)
-- Macro: m4_chomp_all (STRING)
Output STRING in quotes, but without a trailing newline. The macro
'm4_chomp' is slightly faster, and removes at most one newline; the
macro 'm4_chomp_all' removes all consecutive trailing newlines.
Unlike 'm4_flatten', embedded newlines are left intact, and
backslash does not influence the result.
-- Macro: m4_combine ([SEPARATOR], PREFIX-LIST, [INFIX], SUFFIX-1,
[SUFFIX-2], ...)
This macro produces a quoted string containing the pairwise
combination of every element of the quoted, comma-separated
PREFIX-LIST, and every element from the SUFFIX arguments. Each
pairwise combination is joined with INFIX in the middle, and
successive pairs are joined by SEPARATOR. No expansion occurs on
any of the arguments. No output occurs if either the PREFIX or
SUFFIX list is empty, but the lists can contain empty elements.
m4_define([a], [oops])dnl
m4_combine([, ], [[a], [b], [c]], [-], [1], [2], [3])
=>a-1, a-2, a-3, b-1, b-2, b-3, c-1, c-2, c-3
m4_combine([, ], [[a], [b]], [-])
=>
m4_combine([, ], [[a], [b]], [-], [])
=>a-, b-
m4_combine([, ], [], [-], [1], [2])
=>
m4_combine([, ], [[]], [-], [1], [2])
=>-1, -2
-- Macro: m4_escape (STRING)
Convert all instances of '[', ']', '#', and '$' within STRING into
their respective quadrigraphs. The result is still a quoted
string.
-- Macro: m4_flatten (STRING)
Flatten STRING into a single line. Delete all backslash-newline
pairs, and replace all remaining newlines with a space. The result
is still a quoted string.
-- Macro: m4_join ([SEPARATOR], ARGS...)
-- Macro: m4_joinall ([SEPARATOR], ARGS...)
Concatenate each ARG, separated by SEPARATOR. 'joinall' uses every
argument, while 'join' omits empty arguments so that there are no
back-to-back separators in the output. The result is a quoted
string.
m4_define([active], [ACTIVE])dnl
m4_join([|], [one], [], [active], [two])
=>one|active|two
m4_joinall([|], [one], [], [active], [two])
=>one||active|two
Note that if all you intend to do is join ARGS with commas between
them, to form a quoted list suitable for 'm4_foreach', it is more
efficient to use 'm4_dquote'.
-- Macro: m4_newline ([TEXT])
This macro was introduced in Autoconf 2.62, and expands to a
newline, followed by any TEXT. It is primarily useful for
maintaining macro formatting, and ensuring that M4 does not discard
leading whitespace during argument collection.
-- Macro: m4_normalize (STRING)
Remove leading and trailing spaces and tabs, sequences of
backslash-then-newline, and replace multiple spaces, tabs, and
newlines with a single space. This is a combination of
'm4_flatten' and 'm4_strip'. To determine if STRING consists only
of bytes that would be removed by 'm4_normalize', you can use
'm4_ifblank'.
-- Macro: m4_re_escape (STRING)
Backslash-escape all characters in STRING that are active in
regexps.
-- Macro: m4_split (STRING, [REGEXP = [\t ]+])
Split STRING into an M4 list of elements quoted by '[' and ']',
while keeping white space at the beginning and at the end. If
REGEXP is given, use it instead of '[\t ]+' for splitting. If
STRING is empty, the result is an empty list.
-- Macro: m4_strip (STRING)
Strip whitespace from STRING. Sequences of spaces and tabs are
reduced to a single space, then leading and trailing spaces are
removed. The result is still a quoted string. Note that this does
not interfere with newlines; if you want newlines stripped as well,
consider 'm4_flatten', or do it all at once with 'm4_normalize'.
To quickly test if STRING has only whitespace, use 'm4_ifblank'.
-- Macro: m4_text_box (MESSAGE, [FRAME = -])
Add a text box around MESSAGE, using FRAME as the border character
above and below the message. The FRAME argument must be a single
byte, and does not support quadrigraphs. The frame correctly
accounts for the subsequent expansion of MESSAGE. For example:
m4_define([macro], [abc])dnl
m4_text_box([macro])
=>## --- ##
=>## abc ##
=>## --- ##
The MESSAGE must contain balanced quotes and parentheses, although
quadrigraphs can be used to work around this.
-- Macro: m4_text_wrap (STRING, [PREFIX], [PREFIX1 = PREFIX], [WIDTH =
79])
Break STRING into a series of whitespace-separated words, then
output those words separated by spaces, and wrapping lines any time
the output would exceed WIDTH columns. If given, PREFIX1 begins
the first line, and PREFIX begins all wrapped lines. If PREFIX1 is
longer than PREFIX, then the first line consists of just PREFIX1.
If PREFIX is longer than PREFIX1, padding is inserted so that the
first word of STRING begins at the same indentation as all wrapped
lines. Note that using literal tab characters in any of the
arguments will interfere with the calculation of width. No
expansions occur on PREFIX, PREFIX1, or the words of STRING,
although quadrigraphs are recognized.
For some examples:
m4_text_wrap([Short string */], [ ], [/* ], [20])
=>/* Short string */
m4_text_wrap([Much longer string */], [ ], [/* ], [20])
=>/* Much longer
=> string */
m4_text_wrap([Short doc.], [ ], [ --short ], [30])
=> --short Short doc.
m4_text_wrap([Short doc.], [ ], [ --too-wide ], [30])
=> --too-wide
=> Short doc.
m4_text_wrap([Super long documentation.], [ ],
[ --too-wide ], 30)
=> --too-wide
=> Super long
=> documentation.
-- Macro: m4_tolower (STRING)
-- Macro: m4_toupper (STRING)
Return STRING with letters converted to upper or lower case,
respectively.
File: autoconf.info, Node: Number processing Macros, Next: Set manipulation Macros, Prev: Text processing Macros, Up: Programming in M4sugar
8.3.8 Arithmetic computation in M4
----------------------------------
The following macros facilitate integer arithmetic operations. Where a
parameter is documented as taking an arithmetic expression, you can use
anything that can be parsed by 'm4_eval'.
-- Macro: m4_cmp (EXPR-1, EXPR-2)
Compare the arithmetic expressions EXPR-1 and EXPR-2, and expand to
'-1' if EXPR-1 is smaller, '0' if they are equal, and '1' if EXPR-1
is larger.
-- Macro: m4_list_cmp (LIST-1, LIST-2)
Compare the two M4 lists consisting of comma-separated arithmetic
expressions, left to right. Expand to '-1' for the first element
pairing where the value from LIST-1 is smaller, '1' where the value
from LIST-2 is smaller, or '0' if both lists have the same values.
If one list is shorter than the other, the remaining elements of
the longer list are compared against zero.
m4_list_cmp([1, 0], [1])
=>0
m4_list_cmp([1, [1 * 0]], [1, 0])
=>0
m4_list_cmp([1, 2], [1, 0])
=>1
m4_list_cmp([1, [1+1], 3],[1, 2])
=>1
m4_list_cmp([1, 2, -3], [1, 2])
=>-1
m4_list_cmp([1, 0], [1, 2])
=>-1
m4_list_cmp([1], [1, 2])
=>-1
-- Macro: m4_max (ARG, ...)
This macro was introduced in Autoconf 2.62. Expand to the decimal
value of the maximum arithmetic expression among all the arguments.
-- Macro: m4_min (ARG, ...)
This macro was introduced in Autoconf 2.62. Expand to the decimal
value of the minimum arithmetic expression among all the arguments.
-- Macro: m4_sign (EXPR)
Expand to '-1' if the arithmetic expression EXPR is negative, '1'
if it is positive, and '0' if it is zero.
-- Macro: m4_version_compare (VERSION-1, VERSION-2)
This macro was introduced in Autoconf 2.53, but had a number of
usability limitations that were not lifted until Autoconf 2.62.
Compare the version strings VERSION-1 and VERSION-2, and expand to
'-1' if VERSION-1 is smaller, '0' if they are the same, or '1'
VERSION-2 is smaller. Version strings must be a list of elements
separated by '.', ',' or '-', where each element is a number along
with optional case-insensitive letters designating beta releases.
The comparison stops at the leftmost element that contains a
difference, although a 0 element compares equal to a missing
element.
It is permissible to include commit identifiers in VERSION, such as
an abbreviated SHA1 of the commit, provided there is still a
monotonically increasing prefix to allow for accurate version-based
comparisons. For example, this paragraph was written when the
development snapshot of autoconf claimed to be at version
'2.61a-248-dc51', or 248 commits after the 2.61a release, with an
abbreviated commit identification of 'dc51'.
m4_version_compare([1.1], [2.0])
=>-1
m4_version_compare([2.0b], [2.0a])
=>1
m4_version_compare([1.1.1], [1.1.1a])
=>-1
m4_version_compare([1.2], [1.1.1a])
=>1
m4_version_compare([1.0], [1])
=>0
m4_version_compare([1.1pre], [1.1PRE])
=>0
m4_version_compare([1.1a], [1,10])
=>-1
m4_version_compare([2.61a], [2.61a-248-dc51])
=>-1
m4_version_compare([2.61b], [2.61a-248-dc51])
=>1
-- Macro: m4_version_prereq (VERSION, [IF-NEW-ENOUGH], [IF-OLD =
m4_fatal])
Compares VERSION against the version of Autoconf currently running.
If the running version is at VERSION or newer, expand
IF-NEW-ENOUGH, but if VERSION is larger than the version currently
executing, expand IF-OLD, which defaults to printing an error
message and exiting m4sugar with status 63. When given only one
argument, this behaves like 'AC_PREREQ' (*note Versioning::).
Remember that the autoconf philosophy favors feature checks over
version checks.
File: autoconf.info, Node: Set manipulation Macros, Next: Forbidden Patterns, Prev: Number processing Macros, Up: Programming in M4sugar
8.3.9 Set manipulation in M4
----------------------------
Sometimes, it is necessary to track a set of data, where the order does
not matter and where there are no duplicates in the set. The following
macros facilitate set manipulations. Each set is an opaque object,
which can only be accessed via these basic operations. The underlying
implementation guarantees linear scaling for set creation, which is more
efficient than using the quadratic 'm4_append_uniq'. Both set names and
values can be arbitrary strings, except for unbalanced quotes. This
implementation ties up memory for removed elements until the next
operation that must traverse all the elements of a set; and although
that may slow down some operations until the memory for removed elements
is pruned, it still guarantees linear performance.
-- Macro: m4_set_add (SET, VALUE, [IF-UNIQ], [IF-DUP])
Adds the string VALUE as a member of set SET. Expand IF-UNIQ if
the element was added, or IF-DUP if it was previously in the set.
Operates in amortized constant time, so that set creation scales
linearly.
-- Macro: m4_set_add_all (SET, VALUE...)
Adds each VALUE to the set SET. This is slightly more efficient
than repeatedly invoking 'm4_set_add'.
-- Macro: m4_set_contains (SET, VALUE, [IF-PRESENT], [IF-ABSENT])
Expands IF-PRESENT if the string VALUE is a member of SET,
otherwise IF-ABSENT.
m4_set_contains([a], [1], [yes], [no])
=>no
m4_set_add([a], [1], [added], [dup])
=>added
m4_set_add([a], [1], [added], [dup])
=>dup
m4_set_contains([a], [1], [yes], [no])
=>yes
m4_set_remove([a], [1], [removed], [missing])
=>removed
m4_set_contains([a], [1], [yes], [no])
=>no
m4_set_remove([a], [1], [removed], [missing])
=>missing
-- Macro: m4_set_contents (SET, [SEP])
-- Macro: m4_set_dump (SET, [SEP])
Expands to a single string consisting of all the members of the set
SET, each separated by SEP, which is not expanded.
'm4_set_contents' leaves the elements in SET but reclaims any
memory occupied by removed elements, while 'm4_set_dump' is a
faster one-shot action that also deletes the set. No provision is
made for disambiguating members that contain a non-empty SEP as a
substring; use 'm4_set_empty' to distinguish between an empty set
and the set containing only the empty string. The order of the
output is unspecified; in the current implementation, part of the
speed of 'm4_set_dump' results from using a different output order
than 'm4_set_contents'. These macros scale linearly in the size of
the set before memory pruning, and 'm4_set_contents([SET], [SEP])'
is faster than 'm4_joinall([SEP]m4_set_listc([SET]))'.
m4_set_add_all([a], [1], [2], [3])
=>
m4_set_contents([a], [-])
=>1-2-3
m4_joinall([-]m4_set_listc([a]))
=>1-2-3
m4_set_dump([a], [-])
=>3-2-1
m4_set_contents([a])
=>
m4_set_add([a], [])
=>
m4_set_contents([a], [-])
=>
-- Macro: m4_set_delete (SET)
Delete all elements and memory associated with SET. This is linear
in the set size, and faster than removing one element at a time.
-- Macro: m4_set_difference (SETA, SETB)
-- Macro: m4_set_intersection (SETA, SETB)
-- Macro: m4_set_union (SETA, SETB)
Compute the relation between SETA and SETB, and output the result
as a list of quoted arguments without duplicates and with a leading
comma. Set difference selects the elements in SETA but not SETB,
intersection selects only elements in both sets, and union selects
elements in either set. These actions are linear in the sum of the
set sizes. The leading comma is necessary to distinguish between
no elements and the empty string as the only element.
m4_set_add_all([a], [1], [2], [3])
=>
m4_set_add_all([b], [3], [], [4])
=>
m4_set_difference([a], [b])
=>,1,2
m4_set_difference([b], [a])
=>,,4
m4_set_intersection([a], [b])
=>,3
m4_set_union([a], [b])
=>,1,2,3,,4
-- Macro: m4_set_empty (SET, [IF-EMPTY], [IF-ELEMENTS])
Expand IF-EMPTY if the set SET has no elements, otherwise expand
IF-ELEMENTS. This macro operates in constant time. Using this
macro can help disambiguate output from 'm4_set_contents' or
'm4_set_list'.
-- Macro: m4_set_foreach (SET, VARIABLE, ACTION)
For each element in the set SET, expand ACTION with the macro
VARIABLE defined as the set element. Behavior is unspecified if
ACTION recursively lists the contents of SET (although listing
other sets is acceptable), or if it modifies the set in any way
other than removing the element currently contained in VARIABLE.
This macro is faster than the corresponding 'm4_foreach([VARIABLE],
m4_indir([m4_dquote]m4_set_listc([SET])), [ACTION])', although
'm4_set_map' might be faster still.
m4_set_add_all([a]m4_for([i], [1], [5], [], [,i]))
=>
m4_set_contents([a])
=>12345
m4_set_foreach([a], [i],
[m4_if(m4_eval(i&1), [0], [m4_set_remove([a], i, [i])])])
=>24
m4_set_contents([a])
=>135
-- Macro: m4_set_list (SET)
-- Macro: m4_set_listc (SET)
Produce a list of arguments, where each argument is a quoted
element from the set SET. The variant 'm4_set_listc' is
unambiguous, by adding a leading comma if there are any set
elements, whereas the variant 'm4_set_list' cannot distinguish
between an empty set and a set containing only the empty string.
These can be directly used in macros that take multiple arguments,
such as 'm4_join' or 'm4_set_add_all', or wrapped by 'm4_dquote'
for macros that take a quoted list, such as 'm4_map' or
'm4_foreach'. Any memory occupied by removed elements is reclaimed
during these macros.
m4_set_add_all([a], [1], [2], [3])
=>
m4_set_list([a])
=>1,2,3
m4_set_list([b])
=>
m4_set_listc([b])
=>
m4_count(m4_set_list([b]))
=>1
m4_set_empty([b], [0], [m4_count(m4_set_list([b]))])
=>0
m4_set_add([b], [])
=>
m4_set_list([b])
=>
m4_set_listc([b])
=>,
m4_count(m4_set_list([b]))
=>1
m4_set_empty([b], [0], [m4_count(m4_set_list([b]))])
=>1
-- Macro: m4_set_map (SET, ACTION)
For each element in the set SET, expand ACTION with a single
argument of the set element. Behavior is unspecified if ACTION
recursively lists the contents of SET (although listing other sets
is acceptable), or if it modifies the set in any way other than
removing the element passed as an argument. This macro is faster
than either corresponding counterpart of
'm4_map_args([ACTION]m4_set_listc([SET]))' or
'm4_set_foreach([SET], [var], [ACTION(m4_defn([var]))])'. It is
possible to use 'm4_curry' if more than one argument is needed for
ACTION, although it is more efficient to use 'm4_set_map_sep' in
that case.
-- Macro: m4_set_map_sep (SET, [PRE], [POST], [SEP])
For each element in the set SET, expand 'PRE[element]POST',
additionally expanding SEP between elements. Behavior is
unspecified if the expansion recursively lists the contents of SET
(although listing other sets is acceptable), or if it modifies the
set in any way other than removing the element visited by the
expansion. This macro provides the most efficient means for
non-destructively visiting the elements of a set; in particular,
'm4_set_map([SET], [ACTION])' is equivalent to
'm4_set_map_sep([SET], [ACTION(], [)])'.
-- Macro: m4_set_remove (SET, VALUE, [IF-PRESENT], [IF-ABSENT])
If VALUE is an element in the set SET, then remove it and expand
IF-PRESENT. Otherwise expand IF-ABSENT. This macro operates in
constant time so that multiple removals will scale linearly rather
than quadratically; but when used outside of 'm4_set_foreach' or
'm4_set_map', it leaves memory occupied until the set is later
compacted by 'm4_set_contents' or 'm4_set_list'. Several other set
operations are then less efficient between the time of element
removal and subsequent memory compaction, but still maintain their
guaranteed scaling performance.
-- Macro: m4_set_size (SET)
Expand to the size of the set SET. This implementation operates in
constant time, and is thus more efficient than
'm4_eval(m4_count(m4_set_listc([set])) - 1)'.
File: autoconf.info, Node: Forbidden Patterns, Prev: Set manipulation Macros, Up: Programming in M4sugar
8.3.10 Forbidden Patterns
-------------------------
M4sugar provides a means to define suspicious patterns, patterns
describing tokens which should not be found in the output. For
instance, if an Autoconf 'configure' script includes tokens such as
'AC_DEFINE', or 'dnl', then most probably something went wrong
(typically a macro was not evaluated because of overquotation).
M4sugar forbids all the tokens matching '^_?m4_' and '^dnl$'.
Additional layers, such as M4sh and Autoconf, add additional forbidden
patterns to the list.
-- Macro: m4_pattern_forbid (PATTERN)
Declare that no token matching PATTERN must be found in the output.
Comments are not checked; this can be a problem if, for instance,
you have some macro left unexpanded after an '#include'. No
consensus is currently found in the Autoconf community, as some
people consider it should be valid to name macros in comments
(which doesn't make sense to the authors of this documentation:
input, such as macros, should be documented by 'dnl' comments;
reserving '#'-comments to document the output).
Of course, you might encounter exceptions to these generic rules, for
instance you might have to refer to '$m4_flags'.
-- Macro: m4_pattern_allow (PATTERN)
Any token matching PATTERN is allowed, including if it matches an
'm4_pattern_forbid' pattern.
File: autoconf.info, Node: Debugging via autom4te, Prev: Programming in M4sugar, Up: Programming in M4
8.4 Debugging via autom4te
==========================
At times, it is desirable to see what was happening inside m4, to see
why output was not matching expectations. However, post-processing done
by 'autom4te' means that directly using the m4 builtin 'm4_traceon' is
likely to interfere with operation. Also, frequent diversion changes
and the concept of forbidden tokens make it difficult to use 'm4_defn'
to generate inline comments in the final output.
There are a couple of tools to help with this. One is the use of the
'--trace' option provided by 'autom4te' (as well as each of the programs
that wrap 'autom4te', such as 'autoconf'), in order to inspect when a
macro is called and with which arguments. For example, when this
paragraph was written, the autoconf version could be found by:
$ autoconf --trace=AC_INIT
configure.ac:23:AC_INIT:GNU Autoconf:2.63b.95-3963:bug-autoconf@gnu.org
$ autoconf --trace='AC_INIT:version is $2'
version is 2.63b.95-3963
Another trick is to print out the expansion of various m4 expressions
to standard error or to an independent file, with no further m4
expansion, and without interfering with diversion changes or the
post-processing done to standard output. 'm4_errprintn' shows a given
expression on standard error. For example, if you want to see the
expansion of an autoconf primitive or of one of your autoconf macros,
you can do it like this:
$ cat <<\EOF > configure.ac
AC_INIT
m4_errprintn([The definition of AC_DEFINE_UNQUOTED:])
m4_errprintn(m4_defn([AC_DEFINE_UNQUOTED]))
AC_OUTPUT
EOF
$ autoconf
error->The definition of AC_DEFINE_UNQUOTED:
error->_AC_DEFINE_Q([], $@)
File: autoconf.info, Node: Programming in M4sh, Next: Writing Autoconf Macros, Prev: Programming in M4, Up: Top
9 Programming in M4sh
*********************
M4sh, pronounced "mash", is aiming at producing portable Bourne shell
scripts. This name was coined by Lars J. Aas, who notes that, according
to the Webster's Revised Unabridged Dictionary (1913):
Mash \Mash\, n. [Akin to G. meisch, maisch, meische, maische,
mash, wash, and prob. to AS. miscian to mix. See "Mix".]
1. A mass of mixed ingredients reduced to a soft pulpy state by
beating or pressure...
2. A mixture of meal or bran and water fed to animals.
3. A mess; trouble. [Obs.] -Beau. & Fl.
M4sh reserves the M4 macro namespace '^_AS_' for internal use, and
the namespace '^AS_' for M4sh macros. It also reserves the shell and
environment variable namespace '^as_', and the here-document delimiter
namespace '^_AS[A-Z]' in the output file. You should not define your
own macros or output shell code that conflicts with these namespaces.
* Menu:
* Common Shell Constructs:: Portability layer for common shell constructs
* Polymorphic Variables:: Support for indirect variable names
* Initialization Macros:: Macros to establish a sane shell environment
* File Descriptor Macros:: File descriptor macros for input and output
File: autoconf.info, Node: Common Shell Constructs, Next: Polymorphic Variables, Up: Programming in M4sh
9.1 Common Shell Constructs
===========================
M4sh provides portable alternatives for some common shell constructs
that unfortunately are not portable in practice.
-- Macro: AS_BOX (TEXT, [CHAR = -])
Expand into shell code that will output TEXT surrounded by a box
with CHAR in the top and bottom border. TEXT should not contain a
newline, but may contain shell expansions valid for unquoted
here-documents. CHAR defaults to '-', but can be any character
except '/', ''', '"', '\', '&', or '`'. This is useful for
outputting a comment box into log files to separate distinct phases
of script operation.
-- Macro: AS_CASE (WORD, [PATTERN1], [IF-MATCHED1], ..., [DEFAULT])
Expand into a shell 'case' statement, where WORD is matched against
one or more patterns. IF-MATCHED is run if the corresponding
pattern matched WORD, else DEFAULT is run. Avoids several
portability issues (*note Limitations of Shell Builtins: case.).
-- Macro: AS_DIRNAME (FILE-NAME)
Output the directory portion of FILE-NAME. For example, if '$file'
is '/one/two/three', the command 'dir=`AS_DIRNAME(["$file"])`' sets
'dir' to '/one/two'.
This interface may be improved in the future to avoid forks and
losing trailing newlines.
-- Macro: AS_ECHO (WORD)
Emits WORD to the standard output, followed by a newline. WORD
must be a single shell word (typically a quoted string). The bytes
of WORD are output as-is, even if it starts with "-" or contains
"\". Redirections can be placed outside the macro invocation.
This is much more portable than using 'echo' (*note Limitations of
Shell Builtins: echo.).
-- Macro: AS_ECHO_N (WORD)
Emits WORD to the standard output, without a following newline.
WORD must be a single shell word (typically a quoted string) and,
for portability, should not include more than one newline. The
bytes of WORD are output as-is, even if it starts with "-" or
contains "\". Redirections can be placed outside the macro
invocation.
-- Macro: AS_ESCAPE (STRING, [CHARS = `\"$])
Expands to STRING, with any characters in CHARS escaped with a
backslash ('\'). CHARS should be at most four bytes long, and only
contain characters from the set '`\"$'; however, characters may be
safely listed more than once in CHARS for the sake of syntax
highlighting editors. The current implementation expands STRING
after adding escapes; if STRING contains macro calls that in turn
expand to text needing shell quoting, you can use
'AS_ESCAPE(m4_dquote(m4_expand([string])))'.
The default for CHARS ('\"$`') is the set of characters needing
escapes when STRING will be used literally within double quotes.
One common variant is the set of characters to protect when STRING
will be used literally within back-ticks or an unquoted
here-document ('\$`'). Another common variant is '""', which can
be used to form a double-quoted string containing the same
expansions that would have occurred if STRING were expanded in an
unquoted here-document; however, when using this variant, care must
be taken that STRING does not use double quotes within complex
variable expansions (such as '${foo-`echo "hi"`}') that would be
broken with improper escapes.
This macro is often used with 'AS_ECHO'. For an example, observe
the output generated by the shell code generated from this snippet:
foo=bar
AS_ECHO(["AS_ESCAPE(["$foo" = ])AS_ESCAPE(["$foo"], [""])"])
=>"$foo" = "bar"
m4_define([macro], [a, [\b]])
AS_ECHO(["AS_ESCAPE([[macro]])"])
=>macro
AS_ECHO(["AS_ESCAPE([macro])"])
=>a, b
AS_ECHO(["AS_ESCAPE(m4_dquote(m4_expand([macro])))"])
=>a, \b
To escape a string that will be placed within single quotes, use:
m4_bpatsubst([[STRING]], ['], ['\\''])
-- Macro: AS_EXECUTABLE_P (FILE)
Emit code to probe whether FILE is a regular file with executable
permissions (and not a directory with search permissions). The
caller is responsible for quoting FILE.
-- Macro: AS_EXIT ([STATUS = $?])
Emit code to exit the shell with STATUS, defaulting to '$?'. This
macro works around shells that see the exit status of the command
prior to 'exit' inside a 'trap 0' handler (*note Limitations of
Shell Builtins: trap.).
-- Macro: AS_IF (TEST1, [RUN-IF-TRUE1], ..., [RUN-IF-FALSE])
Run shell code TEST1. If TEST1 exits with a zero status then run
shell code RUN-IF-TRUE1, else examine further tests. If no test
exits with a zero status, run shell code RUN-IF-FALSE, with
simplifications if either RUN-IF-TRUE1 or RUN-IF-FALSE is empty.
For example,
AS_IF([test "x$foo" = xyes], [HANDLE_FOO([yes])],
[test "x$foo" != xno], [HANDLE_FOO([maybe])],
[echo foo not specified])
ensures any required macros of 'HANDLE_FOO' are expanded before the
first test.
-- Macro: AS_MKDIR_P (FILE-NAME)
Make the directory FILE-NAME, including intervening directories as
necessary. This is equivalent to 'mkdir -p -- FILE-NAME', except
that it is portable to older versions of 'mkdir' that lack support
for the '-p' option or for the '--' delimiter (*note Limitations of
Usual Tools: mkdir.). Also, 'AS_MKDIR_P' succeeds if FILE-NAME is
a symbolic link to an existing directory, even though Posix is
unclear whether 'mkdir -p' should succeed in that case. If
creation of FILE-NAME fails, exit the script.
Also see the 'AC_PROG_MKDIR_P' macro (*note Particular Programs::).
-- Macro: AS_SET_STATUS (STATUS)
Emit shell code to set the value of '$?' to STATUS, as efficiently
as possible. However, this is not guaranteed to abort a shell
running with 'set -e' (*note Limitations of Shell Builtins: set.).
This should also be used at the end of a complex shell function
instead of 'return' (*note Shell Functions::) to avoid a DJGPP
shell bug.
-- Macro: AS_TR_CPP (EXPRESSION)
Transform EXPRESSION into a valid right-hand side for a C
'#define'. For example:
# This outputs "#define HAVE_CHAR_P 1".
# Notice the m4 quoting around #, to prevent an m4 comment
type="char *"
echo "[#]define AS_TR_CPP([HAVE_$type]) 1"
-- Macro: AS_TR_SH (EXPRESSION)
Transform EXPRESSION into shell code that generates a valid shell
variable name. The result is literal when possible at m4 time, but
must be used with 'eval' if EXPRESSION causes shell indirections.
For example:
# This outputs "Have it!".
header="sys/some file.h"
eval AS_TR_SH([HAVE_$header])=yes
if test "x$HAVE_sys_some_file_h" = xyes; then echo "Have it!"; fi
-- Macro: AS_SET_CATFILE (VAR, DIR, FILE)
Set the polymorphic shell variable VAR to DIR/FILE, but optimizing
the common cases (DIR or FILE is '.', FILE is absolute, etc.).
-- Macro: AS_UNSET (VAR)
Unsets the shell variable VAR, working around bugs in older shells
(*note Limitations of Shell Builtins: unset.). VAR can be a
literal or indirect variable name.
-- Macro: AS_VERSION_COMPARE (VERSION-1, VERSION-2, [ACTION-IF-LESS],
[ACTION-IF-EQUAL], [ACTION-IF-GREATER])
Compare two strings VERSION-1 and VERSION-2, possibly containing
shell variables, as version strings, and expand ACTION-IF-LESS,
ACTION-IF-EQUAL, or ACTION-IF-GREATER depending upon the result.
The algorithm to compare is similar to the one used by strverscmp
in glibc (*note String/Array Comparison: (libc)String/Array
Comparison.).
File: autoconf.info, Node: Polymorphic Variables, Next: Initialization Macros, Prev: Common Shell Constructs, Up: Programming in M4sh
9.2 Support for indirect variable names
=======================================
Often, it is convenient to write a macro that will emit shell code
operating on a shell variable. The simplest case is when the variable
name is known. But a more powerful idiom is writing shell code that can
work through an indirection, where another variable or command
substitution produces the name of the variable to actually manipulate.
M4sh supports the notion of polymorphic shell variables, making it easy
to write a macro that can deal with either literal or indirect variable
names and output shell code appropriate for both use cases. Behavior is
undefined if expansion of an indirect variable does not result in a
literal variable name.
-- Macro: AS_LITERAL_IF (EXPRESSION, [IF-LITERAL], [IF-NOT],
[IF-SIMPLE-REF = IF-NOT])
-- Macro: AS_LITERAL_WORD_IF (EXPRESSION, [IF-LITERAL], [IF-NOT],
[IF-SIMPLE-REF = IF-NOT])
If the expansion of EXPRESSION is definitely a shell literal,
expand IF-LITERAL. If the expansion of EXPRESSION looks like it
might contain shell indirections (such as '$var' or '`expr`'), then
IF-NOT is expanded. Sometimes, it is possible to output optimized
code if EXPRESSION consists only of shell variable expansions (such
as '${var}'), in which case IF-SIMPLE-REF can be provided; but
defaulting to IF-NOT should always be safe. 'AS_LITERAL_WORD_IF'
only expands IF-LITERAL if EXPRESSION looks like a single shell
word, containing no whitespace; while 'AS_LITERAL_IF' allows
whitespace in EXPRESSION.
In order to reduce the time spent recognizing whether an EXPRESSION
qualifies as a literal or a simple indirection, the implementation
is somewhat conservative: EXPRESSION must be a single shell word
(possibly after stripping whitespace), consisting only of bytes
that would have the same meaning whether unquoted or enclosed in
double quotes (for example, 'a.b' results in IF-LITERAL, even
though it is not a valid shell variable name; while both ''a'' and
'[$]' result in IF-NOT, because they behave differently than
'"'a'"' and '"[$]"'). This macro can be used in contexts for
recognizing portable file names (such as in the implementation of
'AC_LIBSOURCE'), or coupled with some transliterations for forming
valid variable names (such as in the implementation of 'AS_TR_SH',
which uses an additional 'm4_translit' to convert '.' to '_').
This example shows how to read the contents of the shell variable
'bar', exercising all three arguments to 'AS_LITERAL_IF'. It
results in a script that will output the line 'hello' three times.
AC_DEFUN([MY_ACTION],
[AS_LITERAL_IF([$1],
[echo "$$1"],
[AS_VAR_COPY([var], [$1])
echo "$var"],
[eval 'echo "$'"$1"\"])])
foo=bar bar=hello
MY_ACTION([bar])
MY_ACTION([`echo bar`])
MY_ACTION([$foo])
-- Macro: AS_VAR_APPEND (VAR, TEXT)
Emit shell code to append the shell expansion of TEXT to the end of
the current contents of the polymorphic shell variable VAR, taking
advantage of shells that provide the '+=' extension for more
efficient scaling.
For situations where the final contents of VAR are relatively short
(less than 256 bytes), it is more efficient to use the simpler code
sequence of 'VAR=${VAR}TEXT' (or its polymorphic equivalent of
'AS_VAR_COPY([t], [VAR])' and 'AS_VAR_SET([VAR], ["$t"TEXT])').
But in the case when the script will be repeatedly appending text
into 'var', issues of scaling start to become apparent. A naive
implementation requires execution time linear to the length of the
current contents of VAR as well as the length of TEXT for a single
append, for an overall quadratic scaling with multiple appends.
This macro takes advantage of shells which provide the extension
'VAR+=TEXT', which can provide amortized constant time for a single
append, for an overall linear scaling with multiple appends. Note
that unlike 'AS_VAR_SET', this macro requires that TEXT be quoted
properly to avoid field splitting and file name expansion.
-- Macro: AS_VAR_ARITH (VAR, EXPRESSION)
Emit shell code to compute the arithmetic expansion of EXPRESSION,
assigning the result as the contents of the polymorphic shell
variable VAR. The code takes advantage of shells that provide
'$(())' for fewer forks, but uses 'expr' as a fallback. Therefore,
the syntax for a valid EXPRESSION is rather limited: all operators
must occur as separate shell arguments and with proper quoting,
there is no portable equality operator, all variables containing
numeric values must be expanded prior to the computation, all
numeric values must be provided in decimal without leading zeroes,
and the first shell argument should not be a negative number. In
the following example, this snippet will print '(2+3)*4 == 20'.
bar=3
AS_VAR_ARITH([foo], [\( 2 + $bar \) \* 4])
echo "(2+$bar)*4 == $foo"
-- Macro: AS_VAR_COPY (DEST, SOURCE)
Emit shell code to assign the contents of the polymorphic shell
variable SOURCE to the polymorphic shell variable DEST. For
example, executing this M4sh snippet will output 'bar hi':
foo=bar bar=hi
AS_VAR_COPY([a], [foo])
AS_VAR_COPY([b], [$foo])
echo "$a $b"
When it is necessary to access the contents of an indirect variable
inside a shell double-quoted context, the recommended idiom is to
first copy the contents into a temporary literal shell variable.
for header in stdint_h inttypes_h ; do
AS_VAR_COPY([var], [ac_cv_header_$header])
echo "$header detected: $var"
done
-- Macro: AS_VAR_IF (VAR, [WORD], [IF-EQUAL], [IF-NOT-EQUAL])
Output a shell conditional statement. If the contents of the
polymorphic shell variable VAR match the string WORD, execute
IF-EQUAL; otherwise execute IF-NOT-EQUAL. WORD must be a single
shell word (typically a quoted string). Avoids shell bugs if an
interrupt signal arrives while a command substitution in VAR is
being expanded.
-- Macro: AS_VAR_PUSHDEF (M4-NAME, VALUE)
-- Macro: AS_VAR_POPDEF (M4-NAME)
A common M4sh idiom involves composing shell variable names from an
m4 argument (for example, writing a macro that uses a cache
variable). VALUE can be an arbitrary string, which will be
transliterated into a valid shell name by 'AS_TR_SH'. In order to
access the composed variable name based on VALUE, it is easier to
declare a temporary m4 macro M4-NAME with 'AS_VAR_PUSHDEF', then
use that macro as the argument to subsequent 'AS_VAR' macros as a
polymorphic variable name, and finally free the temporary macro
with 'AS_VAR_POPDEF'. These macros are often followed with 'dnl',
to avoid excess newlines in the output.
Here is an involved example, that shows the power of writing macros
that can handle composed shell variable names:
m4_define([MY_CHECK_HEADER],
[AS_VAR_PUSHDEF([my_Header], [ac_cv_header_$1])dnl
AS_VAR_IF([my_Header], [yes], [echo "header $1 detected"])dnl
AS_VAR_POPDEF([my_Header])dnl
])
MY_CHECK_HEADER([stdint.h])
for header in inttypes.h stdlib.h ; do
MY_CHECK_HEADER([$header])
done
In the above example, 'MY_CHECK_HEADER' can operate on polymorphic
variable names. In the first invocation, the m4 argument is
'stdint.h', which transliterates into a literal 'stdint_h'. As a
result, the temporary macro 'my_Header' expands to the literal
shell name 'ac_cv_header_stdint_h'. In the second invocation, the
m4 argument to 'MY_CHECK_HEADER' is '$header', and the temporary
macro 'my_Header' expands to the indirect shell name
'$as_my_Header'. During the shell execution of the for loop, when
'$header' contains 'inttypes.h', then '$as_my_Header' contains
'ac_cv_header_inttypes_h'. If this script is then run on a
platform where all three headers have been previously detected, the
output of the script will include:
header stdint.h detected
header inttypes.h detected
header stdlib.h detected
-- Macro: AS_VAR_SET (VAR, [VALUE])
Emit shell code to assign the contents of the polymorphic shell
variable VAR to the shell expansion of VALUE. VALUE is not subject
to field splitting or file name expansion, so if command
substitution is used, it may be done with '`""`' rather than using
an intermediate variable (*note Shell Substitutions::). However,
VALUE does undergo rescanning for additional macro names; behavior
is unspecified if late expansion results in any shell
meta-characters.
-- Macro: AS_VAR_SET_IF (VAR, [IF-SET], [IF-UNDEF])
Emit a shell conditional statement, which executes IF-SET if the
polymorphic shell variable 'var' is set to any value, and IF-UNDEF
otherwise.
-- Macro: AS_VAR_TEST_SET (VAR)
Emit a shell statement that results in a successful exit status
only if the polymorphic shell variable 'var' is set.
File: autoconf.info, Node: Initialization Macros, Next: File Descriptor Macros, Prev: Polymorphic Variables, Up: Programming in M4sh
9.3 Initialization Macros
=========================
-- Macro: AS_BOURNE_COMPATIBLE
Set up the shell to be more compatible with the Bourne shell as
standardized by Posix, if possible. This may involve setting
environment variables, or setting options, or similar
implementation-specific actions. This macro is deprecated, since
'AS_INIT' already invokes it.
-- Macro: AS_INIT
Initialize the M4sh environment. This macro calls 'm4_init', then
outputs the '#! /bin/sh' line, a notice about where the output was
generated from, and code to sanitize the environment for the rest
of the script. Among other initializations, this sets 'SHELL' to
the shell chosen to run the script (*note CONFIG_SHELL::), and
'LC_ALL' to ensure the C locale. Finally, it changes the current
diversion to 'BODY'. 'AS_INIT' is called automatically by
'AC_INIT' and 'AT_INIT', so shell code in 'configure',
'config.status', and 'testsuite' all benefit from a sanitized shell
environment.
-- Macro: AS_INIT_GENERATED (FILE, [COMMENT])
Emit shell code to start the creation of a subsidiary shell script
in FILE, including changing FILE to be executable. This macro
populates the child script with information learned from the parent
(thus, the emitted code is equivalent in effect, but more
efficient, than the code output by 'AS_INIT',
'AS_BOURNE_COMPATIBLE', and 'AS_SHELL_SANITIZE'). If present,
COMMENT is output near the beginning of the child, prior to the
shell initialization code, and is subject to parameter expansion,
command substitution, and backslash quote removal. The parent
script should check the exit status after this macro, in case FILE
could not be properly created (for example, if the disk was full).
If successfully created, the parent script can then proceed to
append additional M4sh constructs into the child script.
Note that the child script starts life without a log file open, so
if the parent script uses logging (*note AS_MESSAGE_LOG_FD::), you
must temporarily disable any attempts to use the log file until
after emitting code to open a log within the child. On the other
hand, if the parent script has 'AS_MESSAGE_FD' redirected somewhere
besides '1', then the child script already has code that copies
stdout to that descriptor. Currently, the suggested idiom for
writing a M4sh shell script from within another script is:
AS_INIT_GENERATED([FILE], [[# My child script.
]]) || { AS_ECHO(["Failed to create child script"]); AS_EXIT; }
m4_pushdef([AS_MESSAGE_LOG_FD])dnl
cat >> "FILE" <<\__EOF__
# Code to initialize AS_MESSAGE_LOG_FD
m4_popdef([AS_MESSAGE_LOG_FD])dnl
# Additional code
__EOF__
This, however, may change in the future as the M4sh interface is
stabilized further.
Also, be aware that use of 'LINENO' within the child script may
report line numbers relative to their location in the parent
script, even when using 'AS_LINENO_PREPARE', if the parent script
was unable to locate a shell with working 'LINENO' support.
-- Macro: AS_LINENO_PREPARE
Find a shell that supports the special variable 'LINENO', which
contains the number of the currently executing line. This macro is
automatically invoked by 'AC_INIT' in configure scripts.
-- Macro: AS_ME_PREPARE
Set up variable 'as_me' to be the basename of the currently
executing script. This macro is automatically invoked by 'AC_INIT'
in configure scripts.
-- Macro: AS_TMPDIR (PREFIX, [DIR = ${TMPDIR:=/tmp}])
Create, as safely as possible, a temporary sub-directory within DIR
with a name starting with PREFIX. PREFIX should be 2-4 characters,
to make it slightly easier to identify the owner of the directory.
If DIR is omitted, then the value of 'TMPDIR' will be used
(defaulting to '/tmp'). On success, the name of the newly created
directory is stored in the shell variable 'tmp'. On error, the
script is aborted.
Typically, this macro is coupled with some exit traps to delete the
created directory and its contents on exit or interrupt. However,
there is a slight window between when the directory is created and
when the name is actually known to the shell, so an interrupt at
the right moment might leave the temporary directory behind. Hence
it is important to use a PREFIX that makes it easier to determine
if a leftover temporary directory from an interrupted script is
safe to delete.
The use of the output variable '$tmp' rather than something in the
'as_' namespace is historical; it has the unfortunate consequence
that reusing this otherwise common name for any other purpose
inside your script has the potential to break any cleanup traps
designed to remove the temporary directory.
-- Macro: AS_SHELL_SANITIZE
Initialize the shell suitably for 'configure' scripts. This has
the effect of 'AS_BOURNE_COMPATIBLE', and sets some other
environment variables for predictable results from configuration
tests. For example, it sets 'LC_ALL' to change to the default C
locale. *Note Special Shell Variables::. This macro is
deprecated, since 'AS_INIT' already invokes it.
File: autoconf.info, Node: File Descriptor Macros, Prev: Initialization Macros, Up: Programming in M4sh
9.4 File Descriptor Macros
==========================
The following macros define file descriptors used to output messages (or
input values) from 'configure' scripts. For example:
echo "$wombats found" >&AS_MESSAGE_LOG_FD
echo 'Enter desired kangaroo count:' >&AS_MESSAGE_FD
read kangaroos <&AS_ORIGINAL_STDIN_FD`
However doing so is seldom needed, because Autoconf provides higher
level macros as described below.
-- Macro: AS_MESSAGE_FD
The file descriptor for 'checking for...' messages and results. By
default, 'AS_INIT' sets this to '1' for standalone M4sh clients.
However, 'AC_INIT' shuffles things around to another file
descriptor, in order to allow the '-q' option of 'configure' to
choose whether messages should go to the script's standard output
or be discarded.
If you want to display some messages, consider using one of the
printing macros (*note Printing Messages::) instead. Copies of
messages output via these macros are also recorded in 'config.log'.
-- Macro: AS_MESSAGE_LOG_FD
This must either be empty, or expand to a file descriptor for log
messages. By default, 'AS_INIT' sets this macro to the empty
string for standalone M4sh clients, thus disabling logging.
However, 'AC_INIT' shuffles things around so that both 'configure'
and 'config.status' use 'config.log' for log messages. Macros that
run tools, like 'AC_COMPILE_IFELSE' (*note Running the Compiler::),
redirect all output to this descriptor. You may want to do so if
you develop such a low-level macro.
-- Macro: AS_ORIGINAL_STDIN_FD
This must expand to a file descriptor for the original standard
input. By default, 'AS_INIT' sets this macro to '0' for standalone
M4sh clients. However, 'AC_INIT' shuffles things around for
safety.
When 'configure' runs, it may accidentally execute an interactive
command that has the same name as the non-interactive meant to be
used or checked. If the standard input was the terminal, such
interactive programs would cause 'configure' to stop, pending some
user input. Therefore 'configure' redirects its standard input
from '/dev/null' during its initialization. This is not normally a
problem, since 'configure' normally does not need user input.
In the extreme case where your 'configure' script really needs to
obtain some values from the original standard input, you can read
them explicitly from 'AS_ORIGINAL_STDIN_FD'.
File: autoconf.info, Node: Writing Autoconf Macros, Next: Portable Shell, Prev: Programming in M4sh, Up: Top
10 Writing Autoconf Macros
**************************
When you write a feature test that could be applicable to more than one
software package, the best thing to do is encapsulate it in a new macro.
Here are some instructions and guidelines for writing Autoconf macros.
* Menu:
* Macro Definitions:: Basic format of an Autoconf macro
* Macro Names:: What to call your new macros
* Reporting Messages:: Notifying 'autoconf' users
* Dependencies Between Macros:: What to do when macros depend on other macros
* Obsoleting Macros:: Warning about old ways of doing things
* Coding Style:: Writing Autoconf macros à la Autoconf
File: autoconf.info, Node: Macro Definitions, Next: Macro Names, Up: Writing Autoconf Macros
10.1 Macro Definitions
======================
-- Macro: AC_DEFUN (NAME, [BODY])
Autoconf macros are defined using the 'AC_DEFUN' macro, which is
similar to the M4 builtin 'm4_define' macro; this creates a macro
named NAME and with BODY as its expansion. In addition to defining
a macro, 'AC_DEFUN' adds to it some code that is used to constrain
the order in which macros are called, while avoiding redundant
output (*note Prerequisite Macros::).
An Autoconf macro definition looks like this:
AC_DEFUN(MACRO-NAME, MACRO-BODY)
You can refer to any arguments passed to the macro as '$1', '$2',
etc. *Note How to define new macros: (m4.info)Definitions, for more
complete information on writing M4 macros.
Most macros fall in one of two general categories. The first
category includes macros which take arguments, in order to generate
output parameterized by those arguments. Macros in this category are
designed to be directly expanded, often multiple times, and should not
be used as the argument to 'AC_REQUIRE'. The other category includes
macros which are shorthand for a fixed block of text, and therefore do
not take arguments. For this category of macros, directly expanding the
macro multiple times results in redundant output, so it is more common
to use the macro as the argument to 'AC_REQUIRE', or to declare the
macro with 'AC_DEFUN_ONCE' (*note One-Shot Macros::).
Be sure to properly quote both the MACRO-BODY _and_ the MACRO-NAME to
avoid any problems if the macro happens to have been previously defined.
Each macro should have a header comment that gives its prototype, and
a brief description. When arguments have default values, display them
in the prototype. For example:
# AC_MSG_ERROR(ERROR, [EXIT-STATUS = 1])
# --------------------------------------
m4_define([AC_MSG_ERROR],
[{ AS_MESSAGE([error: $1], [2])
exit m4_default([$2], [1]); }])
Comments about the macro should be left in the header comment. Most
other comments make their way into 'configure', so just keep using '#'
to introduce comments.
If you have some special comments about pure M4 code, comments that
make no sense in 'configure' and in the header comment, then use the
builtin 'dnl': it causes M4 to discard the text through the next
newline.
Keep in mind that 'dnl' is rarely needed to introduce comments; 'dnl'
is more useful to get rid of the newlines following macros that produce
no output, such as 'AC_REQUIRE'.
Public third-party macros need to use 'AC_DEFUN', and not
'm4_define', in order to be found by 'aclocal' (*note
(automake)Extending aclocal::). Additionally, if it is ever determined
that a macro should be made obsolete, it is easy to convert from
'AC_DEFUN' to 'AU_DEFUN' in order to have 'autoupdate' assist the user
in choosing a better alternative, but there is no corresponding way to
make 'm4_define' issue an upgrade notice (*note AU_DEFUN::).
There is another subtle, but important, difference between using
'm4_define' and 'AC_DEFUN': only the former is unaffected by
'AC_REQUIRE'. When writing a file, it is always safe to replace a block
of text with a 'm4_define' macro that will expand to the same text. But
replacing a block of text with an 'AC_DEFUN' macro with the same content
does not necessarily give the same results, because it changes the
location where any embedded but unsatisfied 'AC_REQUIRE' invocations
within the block will be expanded. For an example of this, see *note
Expanded Before Required::.
File: autoconf.info, Node: Macro Names, Next: Reporting Messages, Prev: Macro Definitions, Up: Writing Autoconf Macros
10.2 Macro Names
================
All of the public Autoconf macros have all-uppercase names in the
namespace '^AC_' to prevent them from accidentally conflicting with
other text; Autoconf also reserves the namespace '^_AC_' for internal
macros. All shell variables that they use for internal purposes have
mostly-lowercase names starting with 'ac_'. Autoconf also uses
here-document delimiters in the namespace '^_AC[A-Z]'. During
'configure', files produced by Autoconf make heavy use of the file
system namespace '^conf'.
Since Autoconf is built on top of M4sugar (*note Programming in
M4sugar::) and M4sh (*note Programming in M4sh::), you must also be
aware of those namespaces ('^_?\(m4\|AS\)_'). And since 'configure.ac'
is also designed to be scanned by Autoheader, Autoscan, Autoupdate, and
Automake, you should be aware of the '^_?A[HNUM]_' namespaces. In
general, you _should not use_ the namespace of a package that does not
own the macro or shell code you are writing.
To ensure that your macros don't conflict with present or future
Autoconf macros, you should prefix your own macro names and any shell
variables they use with some other sequence. Possibilities include your
initials, or an abbreviation for the name of your organization or
software package. Historically, people have not always followed the
rule of using a namespace appropriate for their package, and this has
made it difficult for determining the origin of a macro (and where to
report bugs about that macro), as well as difficult for the true
namespace owner to add new macros without interference from pre-existing
uses of third-party macros. Perhaps the best example of this confusion
is the 'AM_GNU_GETTEXT' macro, which belongs, not to Automake, but to
Gettext.
Most of the Autoconf macros' names follow a structured naming
convention that indicates the kind of feature check by the name. The
macro names consist of several words, separated by underscores, going
from most general to most specific. The names of their cache variables
use the same convention (*note Cache Variable Names::, for more
information on them).
The first word of the name after the namespace initials (such as
'AC_') usually tells the category of the feature being tested. Here are
the categories used in Autoconf for specific test macros, the kind of
macro that you are more likely to write. They are also used for cache
variables, in all-lowercase. Use them where applicable; where they're
not, invent your own categories.
'C'
C language builtin features.
'DECL'
Declarations of C variables in header files.
'FUNC'
Functions in libraries.
'GROUP'
Posix group owners of files.
'HEADER'
Header files.
'LIB'
C libraries.
'PROG'
The base names of programs.
'MEMBER'
Members of aggregates.
'SYS'
Operating system features.
'TYPE'
C builtin or declared types.
'VAR'
C variables in libraries.
After the category comes the name of the particular feature being
tested. Any further words in the macro name indicate particular aspects
of the feature. For example, 'AC_PROG_CC_STDC' checks whether the C
compiler supports ISO Standard C.
An internal macro should have a name that starts with an underscore;
Autoconf internals should therefore start with '_AC_'. Additionally, a
macro that is an internal subroutine of another macro should have a name
that starts with an underscore and the name of that other macro,
followed by one or more words saying what the internal macro does. For
example, 'AC_PATH_X' has internal macros '_AC_PATH_X_XMKMF' and
'_AC_PATH_X_DIRECT'.
File: autoconf.info, Node: Reporting Messages, Next: Dependencies Between Macros, Prev: Macro Names, Up: Writing Autoconf Macros
10.3 Reporting Messages
=======================
When macros statically diagnose abnormal situations, benign or fatal, it
is possible to make 'autoconf' detect the problem, and refuse to create
'configure' in the case of an error. The macros in this section are
considered obsolescent, and new code should use M4sugar macros for this
purpose, see *note Diagnostic Macros::.
On the other hand, it is possible to want to detect errors when
'configure' is run, which are dependent on the environment of the user
rather than the maintainer. For dynamic diagnostics, see *note Printing
Messages::.
-- Macro: AC_DIAGNOSE (CATEGORY, MESSAGE)
Report MESSAGE as a warning (or as an error if requested by the
user) if warnings of the CATEGORY are turned on. This macro is
obsolescent; you are encouraged to use:
m4_warn([CATEGORY], [MESSAGE])
instead. *Note m4_warn::, for more details, including valid
CATEGORY names.
-- Macro: AC_WARNING (MESSAGE)
Report MESSAGE as a syntax warning. This macro is obsolescent; you
are encouraged to use:
m4_warn([syntax], [MESSAGE])
instead. *Note m4_warn::, for more details, as well as better
finer-grained categories of warnings (not all problems have to do
with syntax).
-- Macro: AC_FATAL (MESSAGE)
Report a severe error MESSAGE, and have 'autoconf' die. This macro
is obsolescent; you are encouraged to use:
m4_fatal([MESSAGE])
instead. *Note m4_fatal::, for more details.
When the user runs 'autoconf -W error', warnings from 'm4_warn'
(including those issued through 'AC_DIAGNOSE' and 'AC_WARNING') are
reported as errors, see *note autoconf Invocation::.
File: autoconf.info, Node: Dependencies Between Macros, Next: Obsoleting Macros, Prev: Reporting Messages, Up: Writing Autoconf Macros
10.4 Dependencies Between Macros
================================
Some Autoconf macros depend on other macros having been called first in
order to work correctly. Autoconf provides a way to ensure that certain
macros are called if needed and a way to warn the user if macros are
called in an order that might cause incorrect operation.
* Menu:
* Prerequisite Macros:: Ensuring required information
* Suggested Ordering:: Warning about possible ordering problems
* One-Shot Macros:: Ensuring a macro is called only once
File: autoconf.info, Node: Prerequisite Macros, Next: Suggested Ordering, Up: Dependencies Between Macros
10.4.1 Prerequisite Macros
--------------------------
A macro that you write might need to use values that have previously
been computed by other macros. For example, 'AC_DECL_YYTEXT' examines
the output of 'flex' or 'lex', so it depends on 'AC_PROG_LEX' having
been called first to set the shell variable 'LEX'.
Rather than forcing the user of the macros to keep track of the
dependencies between them, you can use the 'AC_REQUIRE' macro to do it
automatically. 'AC_REQUIRE' can ensure that a macro is only called if
it is needed, and only called once.
-- Macro: AC_REQUIRE (MACRO-NAME)
If the M4 macro MACRO-NAME has not already been called, call it
(without any arguments). Make sure to quote MACRO-NAME with square
brackets. MACRO-NAME must have been defined using 'AC_DEFUN' or
else contain a call to 'AC_PROVIDE' to indicate that it has been
called.
'AC_REQUIRE' must be used inside a macro defined by 'AC_DEFUN'; it
must not be called from the top level. Also, it does not make
sense to require a macro that takes parameters.
'AC_REQUIRE' is often misunderstood. It really implements
dependencies between macros in the sense that if one macro depends upon
another, the latter is expanded _before_ the body of the former. To be
more precise, the required macro is expanded before the outermost
defined macro in the current expansion stack. In particular,
'AC_REQUIRE([FOO])' is not replaced with the body of 'FOO'. For
instance, this definition of macros:
AC_DEFUN([TRAVOLTA],
[test "$body_temperature_in_celsius" -gt "38" &&
dance_floor=occupied])
AC_DEFUN([NEWTON_JOHN],
[test "x$hair_style" = xcurly &&
dance_floor=occupied])
AC_DEFUN([RESERVE_DANCE_FLOOR],
[if date | grep '^Sat.*pm' >/dev/null 2>&1; then
AC_REQUIRE([TRAVOLTA])
AC_REQUIRE([NEWTON_JOHN])
fi])
with this 'configure.ac'
AC_INIT([Dance Manager], [1.0], [bug-dance@example.org])
RESERVE_DANCE_FLOOR
if test "x$dance_floor" = xoccupied; then
AC_MSG_ERROR([cannot pick up here, let's move])
fi
does not leave you with a better chance to meet a kindred soul at other
times than Saturday night since it expands into:
test "$body_temperature_in_Celsius" -gt "38" &&
dance_floor=occupied
test "x$hair_style" = xcurly &&
dance_floor=occupied
fi
if date | grep '^Sat.*pm' >/dev/null 2>&1; then
fi
This behavior was chosen on purpose: (i) it prevents messages in
required macros from interrupting the messages in the requiring macros;
(ii) it avoids bad surprises when shell conditionals are used, as in:
if ...; then
AC_REQUIRE([SOME_CHECK])
fi
...
SOME_CHECK
However, this implementation can lead to another class of problems.
Consider the case where an outer macro first expands, then indirectly
requires, an inner macro:
AC_DEFUN([TESTA], [[echo in A
if test -n "$SEEN_A" ; then echo duplicate ; fi
SEEN_A=:]])
AC_DEFUN([TESTB], [AC_REQUIRE([TESTA])[echo in B
if test -z "$SEEN_A" ; then echo bug ; fi]])
AC_DEFUN([TESTC], [AC_REQUIRE([TESTB])[echo in C]])
AC_DEFUN([OUTER], [[echo in OUTER]
TESTA
TESTC])
OUTER
Prior to Autoconf 2.64, the implementation of 'AC_REQUIRE' recognized
that 'TESTB' needed to be hoisted prior to the expansion of 'OUTER', but
because 'TESTA' had already been directly expanded, it failed to hoist
'TESTA'. Therefore, the expansion of 'TESTB' occurs prior to its
prerequisites, leading to the following output:
in B
bug
in OUTER
in A
in C
Newer Autoconf is smart enough to recognize this situation, and hoists
'TESTA' even though it has already been expanded, but issues a syntax
warning in the process. This is because the hoisted expansion of
'TESTA' defeats the purpose of using 'AC_REQUIRE' to avoid redundant
code, and causes its own set of problems if the hoisted macro is not
idempotent:
in A
in B
in OUTER
in A
duplicate
in C
The bug is not in Autoconf, but in the macro definitions. If you
ever pass a particular macro name to 'AC_REQUIRE', then you are implying
that the macro only needs to be expanded once. But to enforce this,
either the macro must be declared with 'AC_DEFUN_ONCE' (although this
only helps in Autoconf 2.64 or newer), or all uses of that macro should
be through 'AC_REQUIRE'; directly expanding the macro defeats the point
of using 'AC_REQUIRE' to eliminate redundant expansion. In the example,
this rule of thumb was violated because 'TESTB' requires 'TESTA' while
'OUTER' directly expands it. One way of fixing the bug is to factor
'TESTA' into two macros, the portion designed for direct and repeated
use (here, named 'TESTA'), and the portion designed for one-shot output
and used only inside 'AC_REQUIRE' (here, named 'TESTA_PREREQ'). Then,
by fixing all clients to use the correct calling convention according to
their needs:
AC_DEFUN([TESTA], [AC_REQUIRE([TESTA_PREREQ])[echo in A]])
AC_DEFUN([TESTA_PREREQ], [[echo in A_PREREQ
if test -n "$SEEN_A" ; then echo duplicate ; fi
SEEN_A=:]])
AC_DEFUN([TESTB], [AC_REQUIRE([TESTA_PREREQ])[echo in B
if test -z "$SEEN_A" ; then echo bug ; fi]])
AC_DEFUN([TESTC], [AC_REQUIRE([TESTB])[echo in C]])
AC_DEFUN([OUTER], [[echo in OUTER]
TESTA
TESTC])
OUTER
the resulting output will then obey all dependency rules and avoid any
syntax warnings, whether the script is built with old or new Autoconf
versions:
in A_PREREQ
in B
in OUTER
in A
in C
The helper macros 'AS_IF' and 'AS_CASE' may be used to enforce
expansion of required macros outside of shell conditional constructs.
You are furthermore encouraged, although not required, to put all
'AC_REQUIRE' calls at the beginning of a macro. You can use 'dnl' to
avoid the empty lines they leave.
File: autoconf.info, Node: Suggested Ordering, Next: One-Shot Macros, Prev: Prerequisite Macros, Up: Dependencies Between Macros
10.4.2 Suggested Ordering
-------------------------
Some macros should be run before another macro if both are called, but
neither _requires_ that the other be called. For example, a macro that
changes the behavior of the C compiler should be called before any
macros that run the C compiler. Many of these dependencies are noted in
the documentation.
Autoconf provides the 'AC_BEFORE' macro to warn users when macros
with this kind of dependency appear out of order in a 'configure.ac'
file. The warning occurs when creating 'configure' from 'configure.ac',
not when running 'configure'.
For example, 'AC_PROG_CPP' checks whether the C compiler can run the
C preprocessor when given the '-E' option. It should therefore be
called after any macros that change which C compiler is being used, such
as 'AC_PROG_CC'. So 'AC_PROG_CC' contains:
AC_BEFORE([$0], [AC_PROG_CPP])dnl
This warns the user if a call to 'AC_PROG_CPP' has already occurred when
'AC_PROG_CC' is called.
-- Macro: AC_BEFORE (THIS-MACRO-NAME, CALLED-MACRO-NAME)
Make M4 print a warning message to the standard error output if
CALLED-MACRO-NAME has already been called. THIS-MACRO-NAME should
be the name of the macro that is calling 'AC_BEFORE'. The macro
CALLED-MACRO-NAME must have been defined using 'AC_DEFUN' or else
contain a call to 'AC_PROVIDE' to indicate that it has been called.
File: autoconf.info, Node: One-Shot Macros, Prev: Suggested Ordering, Up: Dependencies Between Macros
10.4.3 One-Shot Macros
----------------------
Some macros should be called only once, either because calling them
multiple time is unsafe, or because it is bad style. For instance
Autoconf ensures that 'AC_CANONICAL_BUILD' and cousins (*note
Canonicalizing::) are evaluated only once, because it makes no sense to
run these expensive checks more than once. Such one-shot macros can be
defined using 'AC_DEFUN_ONCE'.
-- Macro: AC_DEFUN_ONCE (MACRO-NAME, MACRO-BODY)
Declare macro MACRO-NAME like 'AC_DEFUN' would (*note Macro
Definitions::), but add additional logic that guarantees that only
the first use of the macro (whether by direct expansion or
'AC_REQUIRE') causes an expansion of MACRO-BODY; the expansion will
occur before the start of any enclosing macro defined by
'AC_DEFUN'. Subsequent expansions are silently ignored.
Generally, it does not make sense for MACRO-BODY to use parameters
such as '$1'.
Prior to Autoconf 2.64, a macro defined by 'AC_DEFUN_ONCE' would emit
a warning if it was directly expanded a second time, so for portability,
it is better to use 'AC_REQUIRE' than direct invocation of MACRO-NAME
inside a macro defined by 'AC_DEFUN' (*note Prerequisite Macros::).
File: autoconf.info, Node: Obsoleting Macros, Next: Coding Style, Prev: Dependencies Between Macros, Up: Writing Autoconf Macros
10.5 Obsoleting Macros
======================
Configuration and portability technology has evolved over the years.
Often better ways of solving a particular problem are developed, or
ad-hoc approaches are systematized. This process has occurred in many
parts of Autoconf. One result is that some of the macros are now
considered "obsolete"; they still work, but are no longer considered the
best thing to do, hence they should be replaced with more modern macros.
Ideally, 'autoupdate' should replace the old macro calls with their
modern implementation.
Autoconf provides a simple means to obsolete a macro.
-- Macro: AU_DEFUN (OLD-MACRO, IMPLEMENTATION, [MESSAGE])
Define OLD-MACRO as IMPLEMENTATION. The only difference with
'AC_DEFUN' is that the user is warned that OLD-MACRO is now
obsolete.
If she then uses 'autoupdate', the call to OLD-MACRO is replaced by
the modern IMPLEMENTATION. MESSAGE should include information on
what to do after running 'autoupdate'; 'autoupdate' prints it as a
warning, and includes it in the updated 'configure.ac' file.
The details of this macro are hairy: if 'autoconf' encounters an
'AU_DEFUN'ed macro, all macros inside its second argument are
expanded as usual. However, when 'autoupdate' is run, only M4 and
M4sugar macros are expanded here, while all other macros are
disabled and appear literally in the updated 'configure.ac'.
-- Macro: AU_ALIAS (OLD-NAME, NEW-NAME)
Used if the OLD-NAME is to be replaced by a call to NEW-MACRO with
the same parameters. This happens for example if the macro was
renamed.
File: autoconf.info, Node: Coding Style, Prev: Obsoleting Macros, Up: Writing Autoconf Macros
10.6 Coding Style
=================
The Autoconf macros follow a strict coding style. You are encouraged to
follow this style, especially if you intend to distribute your macro,
either by contributing it to Autoconf itself or the Autoconf Macro
Archive (http://www.gnu.org/software/autoconf-archive/), or by other
means.
The first requirement is to pay great attention to the quotation.
For more details, see *note Autoconf Language::, and *note M4
Quotation::.
Do not try to invent new interfaces. It is likely that there is a
macro in Autoconf that resembles the macro you are defining: try to
stick to this existing interface (order of arguments, default values,
etc.). We _are_ conscious that some of these interfaces are not
perfect; nevertheless, when harmless, homogeneity should be preferred
over creativity.
Be careful about clashes both between M4 symbols and between shell
variables.
If you stick to the suggested M4 naming scheme (*note Macro Names::),
you are unlikely to generate conflicts. Nevertheless, when you need to
set a special value, _avoid using a regular macro name_; rather, use an
"impossible" name. For instance, up to version 2.13, the macro
'AC_SUBST' used to remember what SYMBOL macros were already defined by
setting 'AC_SUBST_SYMBOL', which is a regular macro name. But since
there is a macro named 'AC_SUBST_FILE', it was just impossible to
'AC_SUBST(FILE)'! In this case, 'AC_SUBST(SYMBOL)' or
'_AC_SUBST(SYMBOL)' should have been used (yes, with the parentheses).
No Autoconf macro should ever enter the user-variable name space;
i.e., except for the variables that are the actual result of running the
macro, all shell variables should start with 'ac_'. In addition, small
macros or any macro that is likely to be embedded in other macros should
be careful not to use obvious names.
Do not use 'dnl' to introduce comments: most of the comments you are
likely to write are either header comments which are not output anyway,
or comments that should make their way into 'configure'. There are
exceptional cases where you do want to comment special M4 constructs, in
which case 'dnl' is right, but keep in mind that it is unlikely.
M4 ignores the leading blanks and newlines before each argument. Use
this feature to indent in such a way that arguments are (more or less)
aligned with the opening parenthesis of the macro being called. For
instance, instead of
AC_CACHE_CHECK(for EMX OS/2 environment,
ac_cv_emxos2,
[AC_COMPILE_IFELSE([AC_LANG_PROGRAM(, [return __EMX__;])],
[ac_cv_emxos2=yes], [ac_cv_emxos2=no])])
write
AC_CACHE_CHECK([for EMX OS/2 environment], [ac_cv_emxos2],
[AC_COMPILE_IFELSE([AC_LANG_PROGRAM([], [return __EMX__;])],
[ac_cv_emxos2=yes],
[ac_cv_emxos2=no])])
or even
AC_CACHE_CHECK([for EMX OS/2 environment],
[ac_cv_emxos2],
[AC_COMPILE_IFELSE([AC_LANG_PROGRAM([],
[return __EMX__;])],
[ac_cv_emxos2=yes],
[ac_cv_emxos2=no])])
When using 'AC_RUN_IFELSE' or any macro that cannot work when
cross-compiling, provide a pessimistic value (typically 'no').
Feel free to use various tricks to prevent auxiliary tools, such as
syntax-highlighting editors, from behaving improperly. For instance,
instead of:
m4_bpatsubst([$1], [$"])
use
m4_bpatsubst([$1], [$""])
so that Emacsen do not open an endless "string" at the first quote. For
the same reasons, avoid:
test $[#] != 0
and use:
test $[@%:@] != 0
Otherwise, the closing bracket would be hidden inside a '#'-comment,
breaking the bracket-matching highlighting from Emacsen. Note the
preferred style to escape from M4: '$[1]', '$[@]', etc. Do not escape
when it is unnecessary. Common examples of useless quotation are
'[$]$1' (write '$$1'), '[$]var' (use '$var'), etc. If you add
portability issues to the picture, you'll prefer '${1+"$[@]"}' to
'"[$]@"', and you'll prefer do something better than hacking Autoconf
':-)'.
When using 'sed', don't use '-e' except for indenting purposes. With
the 's' and 'y' commands, the preferred separator is '/' unless '/'
itself might appear in the pattern or replacement, in which case you
should use '|', or optionally ',' if you know the pattern and
replacement cannot contain a file name. If none of these characters
will do, choose a printable character that cannot appear in the pattern
or replacement. Characters from the set '"#$&'()*;<=>?`|~' are good
choices if the pattern or replacement might contain a file name, since
they have special meaning to the shell and are less likely to occur in
file names.
*Note Macro Definitions::, for details on how to define a macro. If
a macro doesn't use 'AC_REQUIRE', is expected to never be the object of
an 'AC_REQUIRE' directive, and macros required by other macros inside
arguments do not need to be expanded before this macro, then use
'm4_define'. In case of doubt, use 'AC_DEFUN'. Also take into account
that public third-party macros need to use 'AC_DEFUN' in order to be
found by 'aclocal' (*note (automake)Extending aclocal::). All the
'AC_REQUIRE' statements should be at the beginning of the macro, and
each statement should be followed by 'dnl'.
You should not rely on the number of arguments: instead of checking
whether an argument is missing, test that it is not empty. It provides
both a simpler and a more predictable interface to the user, and saves
room for further arguments.
Unless the macro is short, try to leave the closing '])' at the
beginning of a line, followed by a comment that repeats the name of the
macro being defined. This introduces an additional newline in
'configure'; normally, that is not a problem, but if you want to remove
it you can use '[]dnl' on the last line. You can similarly use '[]dnl'
after a macro call to remove its newline. '[]dnl' is recommended
instead of 'dnl' to ensure that M4 does not interpret the 'dnl' as being
attached to the preceding text or macro output. For example, instead
of:
AC_DEFUN([AC_PATH_X],
[AC_MSG_CHECKING([for X])
AC_REQUIRE_CPP()
# ...omitted...
AC_MSG_RESULT([libraries $x_libraries, headers $x_includes])
fi])
you would write:
AC_DEFUN([AC_PATH_X],
[AC_REQUIRE_CPP()[]dnl
AC_MSG_CHECKING([for X])
# ...omitted...
AC_MSG_RESULT([libraries $x_libraries, headers $x_includes])
fi[]dnl
])# AC_PATH_X
If the macro is long, try to split it into logical chunks.
Typically, macros that check for a bug in a function and prepare its
'AC_LIBOBJ' replacement should have an auxiliary macro to perform this
setup. Do not hesitate to introduce auxiliary macros to factor your
code.
In order to highlight the recommended coding style, here is a macro
written the old way:
dnl Check for EMX on OS/2.
dnl _AC_EMXOS2
AC_DEFUN(_AC_EMXOS2,
[AC_CACHE_CHECK(for EMX OS/2 environment, ac_cv_emxos2,
[AC_COMPILE_IFELSE([AC_LANG_PROGRAM(, return __EMX__;)],
ac_cv_emxos2=yes, ac_cv_emxos2=no)])
test "x$ac_cv_emxos2" = xyes && EMXOS2=yes])
and the new way:
# _AC_EMXOS2
# ----------
# Check for EMX on OS/2.
m4_define([_AC_EMXOS2],
[AC_CACHE_CHECK([for EMX OS/2 environment], [ac_cv_emxos2],
[AC_COMPILE_IFELSE([AC_LANG_PROGRAM([], [return __EMX__;])],
[ac_cv_emxos2=yes],
[ac_cv_emxos2=no])])
test "x$ac_cv_emxos2" = xyes && EMXOS2=yes[]dnl
])# _AC_EMXOS2
File: autoconf.info, Node: Portable Shell, Next: Portable Make, Prev: Writing Autoconf Macros, Up: Top
11 Portable Shell Programming
*****************************
When writing your own checks, there are some shell-script programming
techniques you should avoid in order to make your code portable. The
Bourne shell and upward-compatible shells like the Korn shell and Bash
have evolved over the years, and many features added to the original
System7 shell are now supported on all interesting porting targets.
However, the following discussion between Russ Allbery and Robert Lipe
is worth reading:
Russ Allbery:
The GNU assumption that '/bin/sh' is the one and only shell leads
to a permanent deadlock. Vendors don't want to break users'
existing shell scripts, and there are some corner cases in the
Bourne shell that are not completely compatible with a Posix shell.
Thus, vendors who have taken this route will _never_ (OK..."never
say never") replace the Bourne shell (as '/bin/sh') with a Posix
shell.
Robert Lipe:
This is exactly the problem. While most (at least most System V's)
do have a Bourne shell that accepts shell functions most vendor
'/bin/sh' programs are not the Posix shell.
So while most modern systems do have a shell _somewhere_ that meets
the Posix standard, the challenge is to find it.
For this reason, part of the job of M4sh (*note Programming in
M4sh::) is to find such a shell. But to prevent trouble, if you're not
using M4sh you should not take advantage of features that were added
after Unix version 7, circa 1977 (*note Systemology::); you should not
use aliases, negated character classes, or even 'unset'. '#' comments,
while not in Unix version 7, were retrofitted in the original Bourne
shell and can be assumed to be part of the least common denominator.
On the other hand, if you're using M4sh you can assume that the shell
has the features that were added in SVR2 (circa 1984), including shell
functions, 'return', 'unset', and I/O redirection for builtins. For
more information, refer to <http://www.in-ulm.de/~mascheck/bourne/>.
However, some pitfalls have to be avoided for portable use of these
constructs; these will be documented in the rest of this chapter. See
in particular *note Shell Functions:: and *note Limitations of Shell
Builtins: Limitations of Builtins.
Some ancient systems have quite small limits on the length of the
'#!' line; for instance, 32 bytes (not including the newline) on SunOS
4. However, these ancient systems are no longer of practical concern.
The set of external programs you should run in a 'configure' script
is fairly small. *Note Utilities in Makefiles: (standards)Utilities in
Makefiles, for the list. This restriction allows users to start out
with a fairly small set of programs and build the rest, avoiding too
many interdependencies between packages.
Some of these external utilities have a portable subset of features;
see *note Limitations of Usual Tools::.
There are other sources of documentation about shells. The
specification for the Posix Shell Command Language
(http://www.opengroup.org/susv3/utilities/xcu_chap02.html), though more
generous than the restrictive shell subset described above, is fairly
portable nowadays. Also please see the Shell FAQs
(http://www.faqs.org/faqs/unix-faq/shell/).
* Menu:
* Shellology:: A zoology of shells
* Invoking the Shell:: Invoking the shell as a command
* Here-Documents:: Quirks and tricks
* File Descriptors:: FDs and redirections
* Signal Handling:: Shells, signals, and headaches
* File System Conventions:: File names
* Shell Pattern Matching:: Pattern matching
* Shell Substitutions:: Variable and command expansions
* Assignments:: Varying side effects of assignments
* Parentheses:: Parentheses in shell scripts
* Slashes:: Slashes in shell scripts
* Special Shell Variables:: Variables you should not change
* Shell Functions:: What to look out for if you use them
* Limitations of Builtins:: Portable use of not so portable /bin/sh
* Limitations of Usual Tools:: Portable use of portable tools
File: autoconf.info, Node: Shellology, Next: Invoking the Shell, Up: Portable Shell
11.1 Shellology
===============
There are several families of shells, most prominently the Bourne family
and the C shell family which are deeply incompatible. If you want to
write portable shell scripts, avoid members of the C shell family. The
the Shell difference FAQ
(http://www.faqs.org/faqs/unix-faq/shell/shell-differences/) includes a
small history of Posix shells, and a comparison between several of them.
Below we describe some of the members of the Bourne shell family.
Ash
Ash is often used on GNU/Linux and BSD systems as a light-weight
Bourne-compatible shell. Ash 0.2 has some bugs that are fixed in
the 0.3.x series, but portable shell scripts should work around
them, since version 0.2 is still shipped with many GNU/Linux
distributions.
To be compatible with Ash 0.2:
- don't use '$?' after expanding empty or unset variables, or at
the start of an 'eval':
foo=
false
$foo
echo "Do not use it: $?"
false
eval 'echo "Do not use it: $?"'
- don't use command substitution within variable expansion:
cat ${FOO=`bar`}
- beware that single builtin substitutions are not performed by
a subshell, hence their effect applies to the current shell!
*Note Shell Substitutions::, item "Command Substitution".
Bash
To detect whether you are running Bash, test whether 'BASH_VERSION'
is set. To require Posix compatibility, run 'set -o posix'. *Note
Bash Posix Mode: (bash)Bash POSIX Mode, for details.
Bash 2.05 and later
Versions 2.05 and later of Bash use a different format for the
output of the 'set' builtin, designed to make evaluating its output
easier. However, this output is not compatible with earlier
versions of Bash (or with many other shells, probably). So if you
use Bash 2.05 or higher to execute 'configure', you'll need to use
Bash 2.05 for all other build tasks as well.
Ksh
The Korn shell is compatible with the Bourne family and it mostly
conforms to Posix. It has two major variants commonly called
'ksh88' and 'ksh93', named after the years of initial release. It
is usually called 'ksh', but is called 'sh' on some hosts if you
set your path appropriately.
Solaris systems have three variants: '/usr/bin/ksh' is 'ksh88'; it
is standard on Solaris 2.0 and later. '/usr/xpg4/bin/sh' is a
Posix-compliant variant of 'ksh88'; it is standard on Solaris 9 and
later. '/usr/dt/bin/dtksh' is 'ksh93'. Variants that are not
standard may be parts of optional packages. There is no extra
charge for these packages, but they are not part of a minimal OS
install and therefore some installations may not have it.
Starting with Tru64 Version 4.0, the Korn shell '/usr/bin/ksh' is
also available as '/usr/bin/posix/sh'. If the environment variable
'BIN_SH' is set to 'xpg4', subsidiary invocations of the standard
shell conform to Posix.
Pdksh
A public-domain clone of the Korn shell called 'pdksh' is widely
available: it has most of the 'ksh88' features along with a few of
its own. It usually sets 'KSH_VERSION', except if invoked as
'/bin/sh' on OpenBSD, and similarly to Bash you can require Posix
compatibility by running 'set -o posix'. Unfortunately, with
'pdksh' 5.2.14 (the latest stable version as of January 2007) Posix
mode is buggy and causes 'pdksh' to depart from Posix in at least
one respect, see *note Shell Substitutions::.
Zsh
To detect whether you are running 'zsh', test whether 'ZSH_VERSION'
is set. By default 'zsh' is _not_ compatible with the Bourne
shell: you must execute 'emulate sh', and for 'zsh' versions before
3.1.6-dev-18 you must also set 'NULLCMD' to ':'. *Note
Compatibility: (zsh)Compatibility, for details.
The default Mac OS X 'sh' was originally Zsh; it was changed to
Bash in Mac OS X 10.2.
File: autoconf.info, Node: Invoking the Shell, Next: Here-Documents, Prev: Shellology, Up: Portable Shell
11.2 Invoking the Shell
=======================
The Korn shell (up to at least version M-12/28/93d) has a bug when
invoked on a file whose name does not contain a slash. It first
searches for the file's name in 'PATH', and if found it executes that
rather than the original file. For example, assuming there is a binary
executable '/usr/bin/script' in your 'PATH', the last command in the
following example fails because the Korn shell finds '/usr/bin/script'
and refuses to execute it as a shell script:
$ touch xxyzzyz script
$ ksh xxyzzyz
$ ksh ./script
$ ksh script
ksh: script: cannot execute
Bash 2.03 has a bug when invoked with the '-c' option: if the
option-argument ends in backslash-newline, Bash incorrectly reports a
syntax error. The problem does not occur if a character follows the
backslash:
$ $ bash -c 'echo foo \
> '
bash: -c: line 2: syntax error: unexpected end of file
$ bash -c 'echo foo \
> '
foo
*Note Backslash-Newline-Empty::, for how this can cause problems in
makefiles.
File: autoconf.info, Node: Here-Documents, Next: File Descriptors, Prev: Invoking the Shell, Up: Portable Shell
11.3 Here-Documents
===================
Don't rely on '\' being preserved just because it has no special meaning
together with the next symbol. In the native 'sh' on OpenBSD 2.7 '\"'
expands to '"' in here-documents with unquoted delimiter. As a general
rule, if '\\' expands to '\' use '\\' to get '\'.
With OpenBSD 2.7's 'sh'
$ cat <<EOF
> \" \\
> EOF
" \
and with Bash:
bash-2.04$ cat <<EOF
> \" \\
> EOF
\" \
Using command substitutions in a here-document that is fed to a shell
function is not portable. For example, with Solaris 10 '/bin/sh':
$ kitty () { cat; }
$ kitty <<EOF
> `echo ok`
> EOF
/tmp/sh199886: cannot open
$ echo $?
1
Some shells mishandle large here-documents: for example, Solaris 10
'dtksh' and the UnixWare 7.1.1 Posix shell, which are derived from Korn
shell version M-12/28/93d, mishandle braced variable expansion that
crosses a 1024- or 4096-byte buffer boundary within a here-document.
Only the part of the variable name after the boundary is used. For
example, '${variable}' could be replaced by the expansion of '${ble}'.
If the end of the variable name is aligned with the block boundary, the
shell reports an error, as if you used '${}'. Instead of
'${variable-default}', the shell may expand '${riable-default}', or even
'${fault}'. This bug can often be worked around by omitting the braces:
'$variable'. The bug was fixed in 'ksh93g' (1998-04-30) but as of 2006
many operating systems were still shipping older versions with the bug.
Empty here-documents are not portable either; with the following
code, 'zsh' up to at least version 4.3.10 creates a file with a single
newline, whereas other shells create an empty file:
cat >file <<EOF
EOF
Many shells (including the Bourne shell) implement here-documents
inefficiently. In particular, some shells can be extremely inefficient
when a single statement contains many here-documents. For instance if
your 'configure.ac' includes something like:
if <cross_compiling>; then
assume this and that
else
check this
check that
check something else
...
on and on forever
...
fi
A shell parses the whole 'if'/'fi' construct, creating temporary
files for each here-document in it. Some shells create links for such
here-documents on every 'fork', so that the clean-up code they had
installed correctly removes them. It is creating the links that can
take the shell forever.
Moving the tests out of the 'if'/'fi', or creating multiple 'if'/'fi'
constructs, would improve the performance significantly. Anyway, this
kind of construct is not exactly the typical use of Autoconf. In fact,
it's even not recommended, because M4 macros can't look into shell
conditionals, so we may fail to expand a macro when it was expanded
before in a conditional path, and the condition turned out to be false
at runtime, and we end up not executing the macro at all.
Be careful with the use of '<<-' to unindent here-documents. The
behavior is only portable for stripping leading <TAB>s, and things can
silently break if an overzealous editor converts to using leading spaces
(not all shells are nice enough to warn about unterminated
here-documents).
$ printf 'cat <<-x\n\t1\n\t 2\n\tx\n' | bash && echo done
1
2
done
$ printf 'cat <<-x\n 1\n 2\n x\n' | bash-3.2 && echo done
1
2
x
done
File: autoconf.info, Node: File Descriptors, Next: Signal Handling, Prev: Here-Documents, Up: Portable Shell
11.4 File Descriptors
=====================
Most shells, if not all (including Bash, Zsh, Ash), output traces on
stderr, even for subshells. This might result in undesirable content if
you meant to capture the standard-error output of the inner command:
$ ash -x -c '(eval "echo foo >&2") 2>stderr'
$ cat stderr
+ eval echo foo >&2
+ echo foo
foo
$ bash -x -c '(eval "echo foo >&2") 2>stderr'
$ cat stderr
+ eval 'echo foo >&2'
++ echo foo
foo
$ zsh -x -c '(eval "echo foo >&2") 2>stderr'
# Traces on startup files deleted here.
$ cat stderr
+zsh:1> eval echo foo >&2
+zsh:1> echo foo
foo
One workaround is to grep out uninteresting lines, hoping not to remove
good ones.
If you intend to redirect both standard error and standard output,
redirect standard output first. This works better with HP-UX, since its
shell mishandles tracing if standard error is redirected first:
$ sh -x -c ': 2>err >out'
+ :
+ 2> err $ cat err
1> out
Don't try to redirect the standard error of a command substitution.
It must be done _inside_ the command substitution. When running ': `cd
/zorglub` 2>/dev/null' expect the error message to escape, while ': `cd
/zorglub 2>/dev/null`' works properly.
On the other hand, some shells, such as Solaris or FreeBSD '/bin/sh',
warn about missing programs before performing redirections. Therefore,
to silently check whether a program exists, it is necessary to perform
redirections on a subshell or brace group:
$ /bin/sh -c 'nosuch 2>/dev/null'
nosuch: not found
$ /bin/sh -c '(nosuch) 2>/dev/null'
$ /bin/sh -c '{ nosuch; } 2>/dev/null'
$ bash -c 'nosuch 2>/dev/null'
FreeBSD 6.2 sh may mix the trace output lines from the statements in
a shell pipeline.
It is worth noting that Zsh (but not Ash nor Bash) makes it possible
in assignments though: 'foo=`cd /zorglub` 2>/dev/null'.
Some shells, like 'ash', don't recognize bi-directional redirection
('<>'). And even on shells that recognize it, it is not portable to use
on fifos: Posix does not require read-write support for named pipes, and
Cygwin does not support it:
$ mkfifo fifo
$ exec 5<>fifo
$ echo hi >&5
bash: echo: write error: Communication error on send
Furthermore, versions of 'dash' before 0.5.6 mistakenly truncate regular
files when using '<>':
$ echo a > file
$ bash -c ': 1<>file'; cat file
a
$ dash -c ': 1<>file'; cat file
$ rm a
When catering to old systems, don't redirect the same file descriptor
several times, as you are doomed to failure under Ultrix.
ULTRIX V4.4 (Rev. 69) System #31: Thu Aug 10 19:42:23 GMT 1995
UWS V4.4 (Rev. 11)
$ eval 'echo matter >fullness' >void
illegal io
$ eval '(echo matter >fullness)' >void
illegal io
$ (eval '(echo matter >fullness)') >void
Ambiguous output redirect.
In each case the expected result is of course 'fullness' containing
'matter' and 'void' being empty. However, this bug is probably not of
practical concern to modern platforms.
Solaris 10 'sh' will try to optimize away a ':' command (even if it
is redirected) in a loop after the first iteration, or in a shell
function after the first call:
$ for i in 1 2 3 ; do : >x$i; done
$ ls x*
x1
$ f () { : >$1; }; f y1; f y2; f y3;
$ ls y*
y1
As a workaround, 'echo' or 'eval' can be used.
Don't rely on file descriptors 0, 1, and 2 remaining closed in a
subsidiary program. If any of these descriptors is closed, the
operating system may open an unspecified file for the descriptor in the
new process image. Posix 2008 says this may be done only if the
subsidiary program is set-user-ID or set-group-ID, but HP-UX 11.23 does
it even for ordinary programs, and the next version of Posix will allow
HP-UX behavior.
If you want a file descriptor above 2 to be inherited into a child
process, then you must use redirections specific to that command or a
containing subshell or command group, rather than relying on 'exec' in
the shell. In 'ksh' as well as HP-UX 'sh', file descriptors above 2
which are opened using 'exec N>file' are closed by a subsequent 'exec'
(such as that involved in the fork-and-exec which runs a program or
script):
$ echo 'echo hello >&5' >k
$ /bin/sh -c 'exec 5>t; ksh ./k; exec 5>&-; cat t
hello
$ bash -c 'exec 5>t; ksh ./k; exec 5>&-; cat t
hello
$ ksh -c 'exec 5>t; ksh ./k; exec 5>&-; cat t
./k[1]: 5: cannot open [Bad file number]
$ ksh -c '(ksh ./k) 5>t; cat t'
hello
$ ksh -c '{ ksh ./k; } 5>t; cat t'
hello
$ ksh -c '5>t ksh ./k; cat t
hello
Don't rely on duplicating a closed file descriptor to cause an error.
With Solaris '/bin/sh', failed duplication is silently ignored, which
can cause unintended leaks to the original file descriptor. In this
example, observe the leak to standard output:
$ bash -c 'echo hi >&3' 3>&-; echo $?
bash: 3: Bad file descriptor
1
$ /bin/sh -c 'echo hi >&3' 3>&-; echo $?
hi
0
Fortunately, an attempt to close an already closed file descriptor
will portably succeed. Likewise, it is safe to use either style of
'N<&-' or 'N>&-' for closing a file descriptor, even if it doesn't match
the read/write mode that the file descriptor was opened with.
DOS variants cannot rename or remove open files, such as in 'mv foo
bar >foo' or 'rm foo >foo', even though this is perfectly portable among
Posix hosts.
A few ancient systems reserved some file descriptors. By convention,
file descriptor 3 was opened to '/dev/tty' when you logged into Eighth
Edition (1985) through Tenth Edition Unix (1989). File descriptor 4 had
a special use on the Stardent/Kubota Titan (circa 1990), though we don't
now remember what it was. Both these systems are obsolete, so it's now
safe to treat file descriptors 3 and 4 like any other file descriptors.
On the other hand, you can't portably use multi-digit file
descriptors. Solaris 'ksh' doesn't understand any file descriptor
larger than '9':
$ bash -c 'exec 10>&-'; echo $?
0
$ ksh -c 'exec 9>&-'; echo $?
0
$ ksh -c 'exec 10>&-'; echo $?
ksh[1]: exec: 10: not found
127
File: autoconf.info, Node: Signal Handling, Next: File System Conventions, Prev: File Descriptors, Up: Portable Shell
11.5 Signal Handling
====================
Portable handling of signals within the shell is another major source of
headaches. This is worsened by the fact that various different,
mutually incompatible approaches are possible in this area, each with
its distinctive merits and demerits. A detailed description of these
possible approaches, as well as of their pros and cons, can be found in
this article (http://www.cons.org/cracauer/sigint.html).
Solaris 10 '/bin/sh' automatically traps most signals by default; the
shell still exits with error upon termination by one of those signals,
but in such a case the exit status might be somewhat unexpected (even if
allowed by POSIX, strictly speaking):
$ bash -c 'kill -1 $$'; echo $? # Will exit 128 + (signal number).
Hangup
129
$ /bin/ksh -c 'kill -15 $$'; echo $? # Likewise.
Terminated
143
$ for sig in 1 2 3 15; do
> echo $sig:
> /bin/sh -c "kill -$s \$\$"; echo $?
> done
signal 1:
Hangup
129
signal 2:
208
signal 3:
208
signal 15:
208
This gets even worse if one is using the POSIX 'wait' interface to
get details about the shell process terminations: it will result in the
shell having exited normally, rather than by receiving a signal.
$ cat > foo.c <<'END'
#include <stdio.h> /* for printf */
#include <stdlib.h> /* for system */
#include <sys/wait.h> /* for WIF* macros */
int main(void)
{
int status = system ("kill -15 $$");
printf ("Terminated by signal: %s\n",
WIFSIGNALED (status) ? "yes" : "no");
printf ("Exited normally: %s\n",
WIFEXITED (status) ? "yes" : "no");
return 0;
}
END
$ cc -o foo foo.c
$ ./a.out # On GNU/Linux
Terminated by signal: no
Exited normally: yes
$ ./a.out # On Solaris 10
Terminated by signal: yes
Exited normally: no
Various shells seem to handle 'SIGQUIT' specially: they ignore it
even if it is not blocked, and even if the shell is not running
interactively (in fact, even if the shell has no attached tty); among
these shells are at least Bash (from version 2 onwards), Zsh 4.3.12,
Solaris 10 '/bin/ksh' and '/usr/xpg4/bin/sh', and AT&T 'ksh93' (2011).
Still, 'SIGQUIT' seems to be trappable quite portably within all these
shells. OTOH, some other shells doesn't special-case the handling of
'SIGQUIT'; among these shells are at least 'pdksh' 5.2.14, Solaris 10
and NetBSD 5.1 '/bin/sh', and the Almquist Shell 0.5.5.1.
Some shells (especially Korn shells and derivatives) might try to
propagate to themselves a signal that has killed a child process; this
is not a bug, but a conscious design choice (although its overall value
might be debatable). The exact details of how this is attained vary
from shell to shell. For example, upon running 'perl -e 'kill 2, $$'',
after the perl process has been interrupted AT&T 'ksh93' (2011) will
proceed to send itself a 'SIGINT', while Solaris 10 '/bin/ksh' and
'/usr/xpg4/bin/sh' will proceed to exit with status 130 (i.e., 128 + 2).
In any case, if there is an active trap associated with 'SIGINT', those
shells will correctly execute it.
Some Korn shells, when a child process die due receiving a signal
with signal number N, can leave in '$?' an exit status of 256+N instead
of the more common 128+N. Observe the difference between AT&T 'ksh93'
(2011) and 'bash' 4.1.5 on Debian:
$ /bin/ksh -c 'sh -c "kill -1 \$\$"; echo $?'
/bin/ksh: line 1: 7837: Hangup
257
$ /bin/bash -c 'sh -c "kill -1 \$\$"; echo $?'
/bin/bash: line 1: 7861 Hangup (sh -c "kill -1 \$\$")
129
This 'ksh' behavior is allowed by POSIX, if implemented with due care;
see this Austin Group discussion
(http://www.austingroupbugs.net/view.php?id=51) for more background.
However, if it is not implemented with proper care, such a behavior
might cause problems in some corner cases. To see why, assume we have a
"wrapper" script like this:
#!/bin/sh
# Ignore some signals in the shell only, not in its child processes.
trap : 1 2 13 15
wrapped_command "$@"
ret=$?
other_command
exit $ret
If 'wrapped_command' is interrupted by a 'SIGHUP' (which has signal
number 1), 'ret' will be set to 257. Unless the 'exit' shell builtin is
smart enough to understand that such a value can only have originated
from a signal, and adjust the final wait status of the shell
appropriately, the value 257 will just get truncated to 1 by the closing
'exit' call, so that a caller of the script will have no way to
determine that termination by a signal was involved. Observe the
different behavior of AT&T 'ksh93' (2011) and 'bash' 4.1.5 on Debian:
$ cat foo.sh
#!/bin/sh
sh -c 'kill -1 $$'
ret=$?
echo $ret
exit $ret
$ /bin/ksh foo.sh; echo $?
foo.sh: line 2: 12479: Hangup
257
1
$ /bin/bash foo.sh; echo $?
foo.sh: line 2: 12487 Hangup (sh -c 'kill -1 $$')
129
129
File: autoconf.info, Node: File System Conventions, Next: Shell Pattern Matching, Prev: Signal Handling, Up: Portable Shell
11.6 File System Conventions
============================
Autoconf uses shell-script processing extensively, so the file names
that it processes should not contain characters that are special to the
shell. Special characters include space, tab, newline, NUL, and the
following:
" # $ & ' ( ) * ; < = > ? [ \ ` |
Also, file names should not begin with '~' or '-', and should contain
neither '-' immediately after '/' nor '~' immediately after ':'. On
Posix-like platforms, directory names should not contain ':', as this
runs afoul of ':' used as the path separator.
These restrictions apply not only to the files that you distribute,
but also to the absolute file names of your source, build, and
destination directories.
On some Posix-like platforms, '!' and '^' are special too, so they
should be avoided.
Posix lets implementations treat leading '//' specially, but requires
leading '///' and beyond to be equivalent to '/'. Most Unix variants
treat '//' like '/'. However, some treat '//' as a "super-root" that
can provide access to files that are not otherwise reachable from '/'.
The super-root tradition began with Apollo Domain/OS, which died out
long ago, but unfortunately Cygwin has revived it.
While 'autoconf' and friends are usually run on some Posix variety,
they can be used on other systems, most notably DOS variants. This
impacts several assumptions regarding file names.
For example, the following code:
case $foo_dir in
/*) # Absolute
;;
*)
foo_dir=$dots$foo_dir ;;
esac
fails to properly detect absolute file names on those systems, because
they can use a drivespec, and usually use a backslash as directory
separator. If you want to be portable to DOS variants (at the price of
rejecting valid but oddball Posix file names like 'a:\b'), you can check
for absolute file names like this:
case $foo_dir in
[\\/]* | ?:[\\/]* ) # Absolute
;;
*)
foo_dir=$dots$foo_dir ;;
esac
Make sure you quote the brackets if appropriate and keep the backslash
as first character (*note Limitations of Shell Builtins: case.).
Also, because the colon is used as part of a drivespec, these systems
don't use it as path separator. When creating or accessing paths, you
can use the 'PATH_SEPARATOR' output variable instead. 'configure' sets
this to the appropriate value for the build system (':' or ';') when it
starts up.
File names need extra care as well. While DOS variants that are
Posixy enough to run 'autoconf' (such as DJGPP) are usually able to
handle long file names properly, there are still limitations that can
seriously break packages. Several of these issues can be easily
detected by the doschk
(ftp://ftp.gnu.org/gnu/non-gnu/doschk/doschk-1.1.tar.gz) package.
A short overview follows; problems are marked with SFN/LFN to
indicate where they apply: SFN means the issues are only relevant to
plain DOS, not to DOS under Microsoft Windows variants, while LFN
identifies problems that exist even under Microsoft Windows variants.
No multiple dots (SFN)
DOS cannot handle multiple dots in file names. This is an
especially important thing to remember when building a portable
configure script, as 'autoconf' uses a .in suffix for template
files.
This is perfectly OK on Posix variants:
AC_CONFIG_HEADERS([config.h])
AC_CONFIG_FILES([source.c foo.bar])
AC_OUTPUT
but it causes problems on DOS, as it requires 'config.h.in',
'source.c.in' and 'foo.bar.in'. To make your package more portable
to DOS-based environments, you should use this instead:
AC_CONFIG_HEADERS([config.h:config.hin])
AC_CONFIG_FILES([source.c:source.cin foo.bar:foobar.in])
AC_OUTPUT
No leading dot (SFN)
DOS cannot handle file names that start with a dot. This is
usually not important for 'autoconf'.
Case insensitivity (LFN)
DOS is case insensitive, so you cannot, for example, have both a
file called 'INSTALL' and a directory called 'install'. This also
affects 'make'; if there's a file called 'INSTALL' in the
directory, 'make install' does nothing (unless the 'install' target
is marked as PHONY).
The 8+3 limit (SFN)
Because the DOS file system only stores the first 8 characters of
the file name and the first 3 of the extension, those must be
unique. That means that 'foobar-part1.c', 'foobar-part2.c' and
'foobar-prettybird.c' all resolve to the same file name
('FOOBAR-P.C'). The same goes for 'foo.bar' and 'foo.bartender'.
The 8+3 limit is not usually a problem under Microsoft Windows, as
it uses numeric tails in the short version of file names to make
them unique. However, a registry setting can turn this behavior
off. While this makes it possible to share file trees containing
long file names between SFN and LFN environments, it also means the
above problem applies there as well.
Invalid characters (LFN)
Some characters are invalid in DOS file names, and should therefore
be avoided. In a LFN environment, these are '/', '\', '?', '*',
':', '<', '>', '|' and '"'. In a SFN environment, other characters
are also invalid. These include '+', ',', '[' and ']'.
Invalid names (LFN)
Some DOS file names are reserved, and cause problems if you try to
use files with those names. These names include 'CON', 'AUX',
'COM1', 'COM2', 'COM3', 'COM4', 'LPT1', 'LPT2', 'LPT3', 'NUL', and
'PRN'. File names are case insensitive, so even names like
'aux/config.guess' are disallowed.
File: autoconf.info, Node: Shell Pattern Matching, Next: Shell Substitutions, Prev: File System Conventions, Up: Portable Shell
11.7 Shell Pattern Matching
===========================
Nowadays portable patterns can use negated character classes like
'[!-aeiou]'. The older syntax '[^-aeiou]' is supported by some shells
but not others; hence portable scripts should never use '^' as the first
character of a bracket pattern.
Outside the C locale, patterns like '[a-z]' are problematic since
they may match characters that are not lower-case letters.
File: autoconf.info, Node: Shell Substitutions, Next: Assignments, Prev: Shell Pattern Matching, Up: Portable Shell
11.8 Shell Substitutions
========================
Contrary to a persistent urban legend, the Bourne shell does not
systematically split variables and back-quoted expressions, in
particular on the right-hand side of assignments and in the argument of
'case'. For instance, the following code:
case "$given_srcdir" in
.) top_srcdir="`echo "$dots" | sed 's|/$||'`" ;;
*) top_srcdir="$dots$given_srcdir" ;;
esac
is more readable when written as:
case $given_srcdir in
.) top_srcdir=`echo "$dots" | sed 's|/$||'` ;;
*) top_srcdir=$dots$given_srcdir ;;
esac
and in fact it is even _more_ portable: in the first case of the first
attempt, the computation of 'top_srcdir' is not portable, since not all
shells properly understand '"`..."..."...`"', for example Solaris 10
ksh:
$ foo="`echo " bar" | sed 's, ,,'`"
ksh: : cannot execute
ksh: bar | sed 's, ,,': cannot execute
Posix does not specify behavior for this sequence. On the other hand,
behavior for '"`...\"...\"...`"' is specified by Posix, but in practice,
not all shells understand it the same way: pdksh 5.2.14 prints spurious
quotes when in Posix mode:
$ echo "`echo \"hello\"`"
hello
$ set -o posix
$ echo "`echo \"hello\"`"
"hello"
There is just no portable way to use double-quoted strings inside
double-quoted back-quoted expressions (pfew!).
Bash 4.1 has a bug where quoted empty strings adjacent to unquoted
parameter expansions are elided during word splitting. Meanwhile, zsh
does not perform word splitting except when in Bourne compatibility
mode. In the example below, the correct behavior is to have five
arguments to the function, and exactly two spaces on either side of the
middle '-', since word splitting collapses multiple spaces in '$f' but
leaves empty arguments intact.
$ bash -c 'n() { echo "$#$@"; }; f=" - "; n - ""$f"" -'
3- - -
$ ksh -c 'n() { echo "$#$@"; }; f=" - "; n - ""$f"" -'
5- - -
$ zsh -c 'n() { echo "$#$@"; }; f=" - "; n - ""$f"" -'
3- - -
$ zsh -c 'emulate sh;
> n() { echo "$#$@"; }; f=" - "; n - ""$f"" -'
5- - -
You can work around this by doing manual word splitting, such as using
'"$str" $list' rather than '"$str"$list'.
There are also portability pitfalls with particular expansions:
'$@'
One of the most famous shell-portability issues is related to
'"$@"'. When there are no positional arguments, Posix says that
'"$@"' is supposed to be equivalent to nothing, but the original
Unix version 7 Bourne shell treated it as equivalent to '""'
instead, and this behavior survives in later implementations like
Digital Unix 5.0.
The traditional way to work around this portability problem is to
use '${1+"$@"}'. Unfortunately this method does not work with Zsh
(3.x and 4.x), which is used on Mac OS X. When emulating the
Bourne shell, Zsh performs word splitting on '${1+"$@"}':
zsh $ emulate sh
zsh $ for i in "$@"; do echo $i; done
Hello World
!
zsh $ for i in ${1+"$@"}; do echo $i; done
Hello
World
!
Zsh handles plain '"$@"' properly, but we can't use plain '"$@"'
because of the portability problems mentioned above. One
workaround relies on Zsh's "global aliases" to convert '${1+"$@"}'
into '"$@"' by itself:
test "${ZSH_VERSION+set}" = set && alias -g '${1+"$@"}'='"$@"'
Zsh only recognizes this alias when a shell word matches it
exactly; '"foo"${1+"$@"}' remains subject to word splitting. Since
this case always yields at least one shell word, use plain '"$@"'.
A more conservative workaround is to avoid '"$@"' if it is possible
that there may be no positional arguments. For example, instead
of:
cat conftest.c "$@"
you can use this instead:
case $# in
0) cat conftest.c;;
*) cat conftest.c "$@";;
esac
Autoconf macros often use the 'set' command to update '$@', so if
you are writing shell code intended for 'configure' you should not
assume that the value of '$@' persists for any length of time.
'${10}'
The 10th, 11th, ... positional parameters can be accessed only
after a 'shift'. The 7th Edition shell reported an error if given
'${10}', and Solaris 10 '/bin/sh' still acts that way:
$ set 1 2 3 4 5 6 7 8 9 10
$ echo ${10}
bad substitution
Conversely, not all shells obey the Posix rule that when braces are
omitted, multiple digits beyond a '$' imply the single-digit
positional parameter expansion concatenated with the remaining
literal digits. To work around the issue, you must use braces.
$ bash -c 'set a b c d e f g h i j; echo $10 ${1}0'
a0 a0
$ dash -c 'set a b c d e f g h i j; echo $10 ${1}0'
j a0
'${VAR:-VALUE}'
Old BSD shells, including the Ultrix 'sh', don't accept the colon
for any shell substitution, and complain and die. Similarly for
${VAR:=VALUE}, ${VAR:?VALUE}, etc. However, all shells that
support functions allow the use of colon in shell substitution, and
since m4sh requires functions, you can portably use null variable
substitution patterns in configure scripts.
'${VAR+VALUE}'
When using '${VAR-VALUE}' or '${VAR-VALUE}' for providing alternate
substitutions, VALUE must either be a single shell word, quoted, or
in the context of an unquoted here-document. Solaris '/bin/sh'
complains otherwise.
$ /bin/sh -c 'echo ${a-b c}'
/bin/sh: bad substitution
$ /bin/sh -c 'echo ${a-'\''b c'\''}'
b c
$ /bin/sh -c 'echo "${a-b c}"'
b c
$ /bin/sh -c 'cat <<EOF
${a-b c}
EOF
b c
According to Posix, if an expansion occurs inside double quotes,
then the use of unquoted double quotes within VALUE is unspecified,
and any single quotes become literal characters; in that case,
escaping must be done with backslash. Likewise, the use of
unquoted here-documents is a case where double quotes have
unspecified results:
$ /bin/sh -c 'echo "${a-"b c"}"'
/bin/sh: bad substitution
$ ksh -c 'echo "${a-"b c"}"'
b c
$ bash -c 'echo "${a-"b c"}"'
b c
$ /bin/sh -c 'a=; echo ${a+'\''b c'\''}'
b c
$ /bin/sh -c 'a=; echo "${a+'\''b c'\''}"'
'b c'
$ /bin/sh -c 'a=; echo "${a+\"b c\"}"'
"b c"
$ /bin/sh -c 'a=; echo "${a+b c}"'
b c
$ /bin/sh -c 'cat <<EOF
${a-"b c"}
EOF'
"b c"
$ /bin/sh -c 'cat <<EOF
${a-'b c'}
EOF'
'b c'
$ bash -c 'cat <<EOF
${a-"b c"}
EOF'
b c
$ bash -c 'cat <<EOF
${a-'b c'}
EOF'
'b c'
Perhaps the easiest way to work around quoting issues in a manner
portable to all shells is to place the results in a temporary
variable, then use '$t' as the VALUE, rather than trying to inline
the expression needing quoting.
$ /bin/sh -c 't="b c\"'\''}\\"; echo "${a-$t}"'
b c"'}\
$ ksh -c 't="b c\"'\''}\\"; echo "${a-$t}"'
b c"'}\
$ bash -c 't="b c\"'\''}\\"; echo "${a-$t}"'
b c"'}\
'${VAR=VALUE}'
When using '${VAR=VALUE}' to assign a default value to VAR,
remember that even though the assignment to VAR does not undergo
file name expansion, the result of the variable expansion does
unless the expansion occurred within double quotes. In particular,
when using ':' followed by unquoted variable expansion for the side
effect of setting a default value, if the final value of '$var'
contains any globbing characters (either from VALUE or from prior
contents), the shell has to spend time performing file name
expansion and field splitting even though those results will not be
used. Therefore, it is a good idea to consider double quotes when
performing default initialization; while remembering how this
impacts any quoting characters appearing in VALUE.
$ time bash -c ': "${a=/usr/bin/*}"; echo "$a"'
/usr/bin/*
real 0m0.005s
user 0m0.002s
sys 0m0.003s
$ time bash -c ': ${a=/usr/bin/*}; echo "$a"'
/usr/bin/*
real 0m0.039s
user 0m0.026s
sys 0m0.009s
$ time bash -c 'a=/usr/bin/*; : ${a=noglob}; echo "$a"'
/usr/bin/*
real 0m0.031s
user 0m0.020s
sys 0m0.010s
$ time bash -c 'a=/usr/bin/*; : "${a=noglob}"; echo "$a"'
/usr/bin/*
real 0m0.006s
user 0m0.002s
sys 0m0.003s
As with '+' and '-', you must use quotes when using '=' if the
VALUE contains more than one shell word; either single quotes for
just the VALUE, or double quotes around the entire expansion:
$ : ${var1='Some words'}
$ : "${var2=like this}"
$ echo $var1 $var2
Some words like this
otherwise some shells, such as Solaris '/bin/sh' or on Digital Unix
V 5.0, die because of a "bad substitution". Meanwhile, Posix
requires that with '=', quote removal happens prior to the
assignment, and the expansion be the final contents of VAR without
quoting (and thus subject to field splitting), in contrast to the
behavior with '-' passing the quoting through to the final
expansion. However, 'bash' 4.1 does not obey this rule.
$ ksh -c 'echo ${var-a\ \ b}'
a b
$ ksh -c 'echo ${var=a\ \ b}'
a b
$ bash -c 'echo ${var=a\ \ b}'
a b
Finally, Posix states that when mixing '${a=b}' with regular
commands, it is unspecified whether the assignments affect the
parent shell environment. It is best to perform assignments
independently from commands, to avoid the problems demonstrated in
this example:
$ bash -c 'x= y=${x:=b} sh -c "echo +\$x+\$y+";echo -$x-'
+b+b+
-b-
$ /bin/sh -c 'x= y=${x:=b} sh -c "echo +\$x+\$y+";echo -$x-'
++b+
--
$ ksh -c 'x= y=${x:=b} sh -c "echo +\$x+\$y+";echo -$x-'
+b+b+
--
'${VAR=VALUE}'
Solaris '/bin/sh' has a frightening bug in its handling of literal
assignments. Imagine you need set a variable to a string
containing '}'. This '}' character confuses Solaris '/bin/sh' when
the affected variable was already set. This bug can be exercised
by running:
$ unset foo
$ foo=${foo='}'}
$ echo $foo
}
$ foo=${foo='}' # no error; this hints to what the bug is
$ echo $foo
}
$ foo=${foo='}'}
$ echo $foo
}}
^ ugh!
It seems that '}' is interpreted as matching '${', even though it
is enclosed in single quotes. The problem doesn't happen using
double quotes, or when using a temporary variable holding the
problematic string.
'${VAR=EXPANDED-VALUE}'
On Ultrix, running
default="yu,yaa"
: ${var="$default"}
sets VAR to 'M-yM-uM-,M-yM-aM-a', i.e., the 8th bit of each char is
set. You don't observe the phenomenon using a simple 'echo $var'
since apparently the shell resets the 8th bit when it expands $var.
Here are two means to make this shell confess its sins:
$ cat -v <<EOF
$var
EOF
and
$ set | grep '^var=' | cat -v
One classic incarnation of this bug is:
default="a b c"
: ${list="$default"}
for c in $list; do
echo $c
done
You'll get 'a b c' on a single line. Why? Because there are no
spaces in '$list': there are 'M- ', i.e., spaces with the 8th bit
set, hence no IFS splitting is performed!!!
One piece of good news is that Ultrix works fine with ':
${list=$default}'; i.e., if you _don't_ quote. The bad news is
then that QNX 4.25 then sets LIST to the _last_ item of DEFAULT!
The portable way out consists in using a double assignment, to
switch the 8th bit twice on Ultrix:
list=${list="$default"}
...but beware of the '}' bug from Solaris (see above). For safety,
use:
test "${var+set}" = set || var={VALUE}
'${#VAR}'
'${VAR%WORD}'
'${VAR%%WORD}'
'${VAR#WORD}'
'${VAR##WORD}'
Posix requires support for these usages, but they do not work with
many traditional shells, e.g., Solaris 10 '/bin/sh'.
Also, 'pdksh' 5.2.14 mishandles some WORD forms. For example if
'$1' is 'a/b' and '$2' is 'a', then '${1#$2}' should yield '/b',
but with 'pdksh' it yields the empty string.
'`COMMANDS`'
Posix requires shells to trim all trailing newlines from command
output before substituting it, so assignments like 'dir=`echo
"$file" | tr a A`' do not work as expected if '$file' ends in a
newline.
While in general it makes no sense, do not substitute a single
builtin with side effects, because Ash 0.2, trying to optimize,
does not fork a subshell to perform the command.
For instance, if you wanted to check that 'cd' is silent, do not
use 'test -z "`cd /`"' because the following can happen:
$ pwd
/tmp
$ test -z "`cd /`" && pwd
/
The result of 'foo=`exit 1`' is left as an exercise to the reader.
The MSYS shell leaves a stray byte in the expansion of a
double-quoted command substitution of a native program, if the end
of the substitution is not aligned with the end of the double
quote. This may be worked around by inserting another pair of
quotes:
$ echo "`printf 'foo\r\n'` bar" > broken
$ echo "`printf 'foo\r\n'`"" bar" | cmp - broken
- broken differ: char 4, line 1
Upon interrupt or SIGTERM, some shells may abort a command
substitution, replace it with a null string, and wrongly evaluate
the enclosing command before entering the trap or ending the
script. This can lead to spurious errors:
$ sh -c 'if test `sleep 5; echo hi` = hi; then echo yes; fi'
$ ^C
sh: test: hi: unexpected operator/operand
You can avoid this by assigning the command substitution to a
temporary variable:
$ sh -c 'res=`sleep 5; echo hi`
if test "x$res" = xhi; then echo yes; fi'
$ ^C
'$(COMMANDS)'
This construct is meant to replace '`COMMANDS`', and it has most of
the problems listed under '`COMMANDS`'.
This construct can be nested while this is impossible to do
portably with back quotes. Unfortunately it is not yet universally
supported. Most notably, even recent releases of Solaris don't
support it:
$ showrev -c /bin/sh | grep version
Command version: SunOS 5.10 Generic 121005-03 Oct 2006
$ echo $(echo blah)
syntax error: `(' unexpected
nor does IRIX 6.5's Bourne shell:
$ uname -a
IRIX firebird-image 6.5 07151432 IP22
$ echo $(echo blah)
$(echo blah)
If you do use '$(COMMANDS)', make sure that the commands do not
start with a parenthesis, as that would cause confusion with a
different notation '$((EXPRESSION))' that in modern shells is an
arithmetic expression not a command. To avoid the confusion,
insert a space between the two opening parentheses.
Avoid COMMANDS that contain unbalanced parentheses in
here-documents, comments, or case statement patterns, as many
shells mishandle them. For example, Bash 3.1, 'ksh88', 'pdksh'
5.2.14, and Zsh 4.2.6 all mishandle the following valid command:
echo $(case x in x) echo hello;; esac)
'$((EXPRESSION))'
Arithmetic expansion is not portable as some shells (most notably
Solaris 10 '/bin/sh') don't support it.
Among shells that do support '$(( ))', not all of them obey the
Posix rule that octal and hexadecimal constants must be recognized:
$ bash -c 'echo $(( 010 + 0x10 ))'
24
$ zsh -c 'echo $(( 010 + 0x10 ))'
26
$ zsh -c 'emulate sh; echo $(( 010 + 0x10 ))'
24
$ pdksh -c 'echo $(( 010 + 0x10 ))'
pdksh: 010 + 0x10 : bad number `0x10'
$ pdksh -c 'echo $(( 010 ))'
10
When it is available, using arithmetic expansion provides a
noticeable speedup in script execution; but testing for support
requires 'eval' to avoid syntax errors. The following construct is
used by 'AS_VAR_ARITH' to provide arithmetic computation when all
arguments are provided in decimal and without a leading zero, and
all operators are properly quoted and appear as distinct arguments:
if ( eval 'test $(( 1 + 1 )) = 2' ) 2>/dev/null; then
eval 'func_arith ()
{
func_arith_result=$(( $* ))
}'
else
func_arith ()
{
func_arith_result=`expr "$@"`
}
fi
func_arith 1 + 1
foo=$func_arith_result
'^'
Always quote '^', otherwise traditional shells such as '/bin/sh' on
Solaris 10 treat this like '|'.
File: autoconf.info, Node: Assignments, Next: Parentheses, Prev: Shell Substitutions, Up: Portable Shell
11.9 Assignments
================
When setting several variables in a row, be aware that the order of the
evaluation is undefined. For instance 'foo=1 foo=2; echo $foo' gives
'1' with Solaris '/bin/sh', but '2' with Bash. You must use ';' to
enforce the order: 'foo=1; foo=2; echo $foo'.
Don't rely on the following to find 'subdir/program':
PATH=subdir$PATH_SEPARATOR$PATH program
as this does not work with Zsh 3.0.6. Use something like this instead:
(PATH=subdir$PATH_SEPARATOR$PATH; export PATH; exec program)
Don't rely on the exit status of an assignment: Ash 0.2 does not
change the status and propagates that of the last statement:
$ false || foo=bar; echo $?
1
$ false || foo=`:`; echo $?
0
and to make things even worse, QNX 4.25 just sets the exit status to 0
in any case:
$ foo=`exit 1`; echo $?
0
To assign default values, follow this algorithm:
1. If the default value is a literal and does not contain any closing
brace, use:
: "${var='my literal'}"
2. If the default value contains no closing brace, has to be expanded,
and the variable being initialized is not intended to be IFS-split
(i.e., it's not a list), then use:
: ${var="$default"}
3. If the default value contains no closing brace, has to be expanded,
and the variable being initialized is intended to be IFS-split
(i.e., it's a list), then use:
var=${var="$default"}
4. If the default value contains a closing brace, then use:
test "${var+set}" = set || var="has a '}'"
In most cases 'var=${var="$default"}' is fine, but in case of doubt,
just use the last form. *Note Shell Substitutions::, items
'${VAR:-VALUE}' and '${VAR=VALUE}' for the rationale.
File: autoconf.info, Node: Parentheses, Next: Slashes, Prev: Assignments, Up: Portable Shell
11.10 Parentheses in Shell Scripts
==================================
Beware of two opening parentheses in a row, as many shell
implementations treat them specially, and Posix says that a portable
script cannot use '((' outside the '$((' form used for shell arithmetic.
In traditional shells, '((cat))' behaves like '(cat)'; but many shells,
including Bash and the Korn shell, treat '((cat))' as an arithmetic
expression equivalent to 'let "cat"', and may or may not report an error
when they detect that 'cat' is not a number. As another example,
'pdksh' 5.2.14 does not treat the following code as a traditional shell
would:
if ((true) || false); then
echo ok
fi
To work around this problem, insert a space between the two opening
parentheses. There is a similar problem and workaround with '$(('; see
*note Shell Substitutions::.
File: autoconf.info, Node: Slashes, Next: Special Shell Variables, Prev: Parentheses, Up: Portable Shell
11.11 Slashes in Shell Scripts
==============================
Unpatched Tru64 5.1 'sh' omits the last slash of command-line arguments
that contain two trailing slashes:
$ echo / // /// //// .// //.
/ / // /// ./ //.
$ x=//
$ eval "echo \$x"
/
$ set -x
$ echo abc | tr -t ab //
+ echo abc
+ tr -t ab /
/bc
Unpatched Tru64 4.0 'sh' adds a slash after '"$var"' if the variable
is empty and the second double-quote is followed by a word that begins
and ends with slash:
$ sh -xc 'p=; echo "$p"/ouch/'
p=
+ echo //ouch/
//ouch/
However, our understanding is that patches are available, so perhaps
it's not worth worrying about working around these horrendous bugs.
File: autoconf.info, Node: Special Shell Variables, Next: Shell Functions, Prev: Slashes, Up: Portable Shell
11.12 Special Shell Variables
=============================
Some shell variables should not be used, since they can have a deep
influence on the behavior of the shell. In order to recover a sane
behavior from the shell, some variables should be unset; M4sh takes care
of this and provides fallback values, whenever needed, to cater for a
very old '/bin/sh' that does not support 'unset'. (*note Portable Shell
Programming: Portable Shell.).
As a general rule, shell variable names containing a lower-case
letter are safe; you can define and use these variables without worrying
about their effect on the underlying system, and without worrying about
whether the shell changes them unexpectedly. (The exception is the
shell variable 'status', as described below.)
Here is a list of names that are known to cause trouble. This list
is not exhaustive, but you should be safe if you avoid the name 'status'
and names containing only upper-case letters and underscores.
'?'
Not all shells correctly reset '$?' after conditionals (*note
Limitations of Shell Builtins: if.). Not all shells manage '$?'
correctly in shell functions (*note Shell Functions::) or in traps
(*note Limitations of Shell Builtins: trap.). Not all shells reset
'$?' to zero after an empty command.
$ bash -c 'false; $empty; echo $?'
0
$ zsh -c 'false; $empty; echo $?'
1
'_'
Many shells reserve '$_' for various purposes, e.g., the name of
the last command executed.
'BIN_SH'
In Tru64, if 'BIN_SH' is set to 'xpg4', subsidiary invocations of
the standard shell conform to Posix.
'CDPATH'
When this variable is set it specifies a list of directories to
search when invoking 'cd' with a relative file name that did not
start with './' or '../'. Posix 1003.1-2001 says that if a
nonempty directory name from 'CDPATH' is used successfully, 'cd'
prints the resulting absolute file name. Unfortunately this output
can break idioms like 'abs=`cd src && pwd`' because 'abs' receives
the name twice. Also, many shells do not conform to this part of
Posix; for example, 'zsh' prints the result only if a directory
name other than '.' was chosen from 'CDPATH'.
In practice the shells that have this problem also support 'unset',
so you can work around the problem as follows:
(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
You can also avoid output by ensuring that your directory name is
absolute or anchored at './', as in 'abs=`cd ./src && pwd`'.
Configure scripts use M4sh, which automatically unsets 'CDPATH' if
possible, so you need not worry about this problem in those
scripts.
'CLICOLOR_FORCE'
When this variable is set, some implementations of tools like 'ls'
attempt to add color to their output via terminal escape sequences,
even when the output is not directed to a terminal, and can thus
cause spurious failures in scripts. Configure scripts use M4sh,
which automatically unsets this variable.
'DUALCASE'
In the MKS shell, case statements and file name generation are
case-insensitive unless 'DUALCASE' is nonzero. Autoconf-generated
scripts export this variable when they start up.
'ENV'
'MAIL'
'MAILPATH'
'PS1'
'PS2'
'PS4'
These variables should not matter for shell scripts, since they are
supposed to affect only interactive shells. However, at least one
shell (the pre-3.0 UWIN Korn shell) gets confused about whether it
is interactive, which means that (for example) a 'PS1' with a side
effect can unexpectedly modify '$?'. To work around this bug, M4sh
scripts (including 'configure' scripts) do something like this:
(unset ENV) >/dev/null 2>&1 && unset ENV MAIL MAILPATH
PS1='$ '
PS2='> '
PS4='+ '
(actually, there is some complication due to bugs in 'unset'; *note
Limitations of Shell Builtins: unset.).
'FPATH'
The Korn shell uses 'FPATH' to find shell functions, so avoid
'FPATH' in portable scripts. 'FPATH' is consulted after 'PATH',
but you still need to be wary of tests that use 'PATH' to find
whether a command exists, since they might report the wrong result
if 'FPATH' is also set.
'GREP_OPTIONS'
When this variable is set, some implementations of 'grep' honor
these options, even if the options include direction to enable
colored output via terminal escape sequences, and the result can
cause spurious failures when the output is not directed to a
terminal. Configure scripts use M4sh, which automatically unsets
this variable.
'IFS'
Long ago, shell scripts inherited 'IFS' from the environment, but
this caused many problems so modern shells ignore any environment
settings for 'IFS'.
Don't set the first character of 'IFS' to backslash. Indeed,
Bourne shells use the first character (backslash) when joining the
components in '"$@"' and some shells then reinterpret (!) the
backslash escapes, so you can end up with backspace and other
strange characters.
The proper value for 'IFS' (in regular code, not when performing
splits) is '<SPC><TAB><RET>'. The first character is especially
important, as it is used to join the arguments in '$*'; however,
note that traditional shells, but also bash-2.04, fail to adhere to
this and join with a space anyway.
M4sh guarantees that 'IFS' will have the default value at the
beginning of a script, and many macros within autoconf rely on this
setting. It is okay to use blocks of shell code that temporarily
change the value of 'IFS' in order to split on another character,
but remember to restore it before expanding further macros.
Unsetting 'IFS' instead of resetting it to the default sequence is
not suggested, since code that tries to save and restore the
variable's value will incorrectly reset it to an empty value, thus
disabling field splitting:
unset IFS
# default separators used for field splitting
save_IFS=$IFS
IFS=:
# ...
IFS=$save_IFS
# no field splitting performed
'LANG'
'LC_ALL'
'LC_COLLATE'
'LC_CTYPE'
'LC_MESSAGES'
'LC_MONETARY'
'LC_NUMERIC'
'LC_TIME'
You should set all these variables to 'C' because so much
configuration code assumes the C locale and Posix requires that
locale environment variables be set to 'C' if the C locale is
desired; 'configure' scripts and M4sh do that for you. Export
these variables after setting them.
'LANGUAGE'
'LANGUAGE' is not specified by Posix, but it is a GNU extension
that overrides 'LC_ALL' in some cases, so you (or M4sh) should set
it too.
'LC_ADDRESS'
'LC_IDENTIFICATION'
'LC_MEASUREMENT'
'LC_NAME'
'LC_PAPER'
'LC_TELEPHONE'
These locale environment variables are GNU extensions. They are
treated like their Posix brethren ('LC_COLLATE', etc.) as described
above.
'LINENO'
Most modern shells provide the current line number in 'LINENO'.
Its value is the line number of the beginning of the current
command. M4sh, and hence Autoconf, attempts to execute 'configure'
with a shell that supports 'LINENO'. If no such shell is
available, it attempts to implement 'LINENO' with a Sed prepass
that replaces each instance of the string '$LINENO' (not followed
by an alphanumeric character) with the line's number. In M4sh
scripts you should execute 'AS_LINENO_PREPARE' so that these
workarounds are included in your script; configure scripts do this
automatically in 'AC_INIT'.
You should not rely on 'LINENO' within 'eval' or shell functions,
as the behavior differs in practice. The presence of a quoted
newline within simple commands can alter which line number is used
as the starting point for '$LINENO' substitutions within that
command. Also, the possibility of the Sed prepass means that you
should not rely on '$LINENO' when quoted, when in here-documents,
or when line continuations are used. Subshells should be OK,
though. In the following example, lines 1, 9, and 14 are portable,
but the other instances of '$LINENO' do not have deterministic
values:
$ cat lineno
echo 1. $LINENO
echo "2. $LINENO
3. $LINENO"
cat <<EOF
5. $LINENO
6. $LINENO
7. \$LINENO
EOF
( echo 9. $LINENO )
eval 'echo 10. $LINENO'
eval 'echo 11. $LINENO
echo 12. $LINENO'
echo 13. '$LINENO'
echo 14. $LINENO '
15.' $LINENO
f () { echo $1 $LINENO;
echo $1 $LINENO }
f 18.
echo 19. \
$LINENO
$ bash-3.2 ./lineno
1. 1
2. 3
3. 3
5. 4
6. 4
7. $LINENO
9. 9
10. 10
11. 12
12. 13
13. $LINENO
14. 14
15. 14
18. 16
18. 17
19. 19
$ zsh-4.3.4 ./lineno
1. 1
2. 2
3. 2
5. 4
6. 4
7. $LINENO
9. 9
10. 1
11. 1
12. 2
13. $LINENO
14. 14
15. 14
18. 0
18. 1
19. 19
$ pdksh-5.2.14 ./lineno
1. 1
2. 2
3. 2
5. 4
6. 4
7. $LINENO
9. 9
10. 0
11. 0
12. 0
13. $LINENO
14. 14
15. 14
18. 16
18. 17
19. 19
$ sed '=' <lineno |
> sed '
> N
> s,$,-,
> t loop
> :loop
> s,^\([0-9]*\)\(.*\)[$]LINENO\([^a-zA-Z0-9_]\),\1\2\1\3,
> t loop
> s,-$,,
> s,^[0-9]*\n,,
> ' |
> sh
1. 1
2. 2
3. 3
5. 5
6. 6
7. \7
9. 9
10. 10
11. 11
12. 12
13. 13
14. 14
15. 15
18. 16
18. 17
19. 20
In particular, note that 'config.status' (and any other subsidiary
script created by 'AS_INIT_GENERATED') might report line numbers
relative to the parent script as a result of the potential Sed
pass.
'NULLCMD'
When executing the command '>foo', 'zsh' executes '$NULLCMD >foo'
unless it is operating in Bourne shell compatibility mode and the
'zsh' version is newer than 3.1.6-dev-18. If you are using an
older 'zsh' and forget to set 'NULLCMD', your script might be
suspended waiting for data on its standard input.
'options'
For 'zsh' 4.3.10, 'options' is treated as an associative array even
after 'emulate sh', so it should not be used.
'PATH_SEPARATOR'
On DJGPP systems, the 'PATH_SEPARATOR' environment variable can be
set to either ':' or ';' to control the path separator Bash uses to
set up certain environment variables (such as 'PATH'). You can set
this variable to ';' if you want 'configure' to use ';' as a
separator; this might be useful if you plan to use non-Posix shells
to execute files. *Note File System Conventions::, for more
information about 'PATH_SEPARATOR'.
'POSIXLY_CORRECT'
In the GNU environment, exporting 'POSIXLY_CORRECT' with any value
(even empty) causes programs to try harder to conform to Posix.
Autoconf does not directly manipulate this variable, but 'bash'
ties the shell variable 'POSIXLY_CORRECT' to whether the script is
running in Posix mode. Therefore, take care when exporting or
unsetting this variable, so as not to change whether 'bash' is in
Posix mode.
$ bash --posix -c 'set -o | grep posix
> unset POSIXLY_CORRECT
> set -o | grep posix'
posix on
posix off
'PWD'
Posix 1003.1-2001 requires that 'cd' and 'pwd' must update the
'PWD' environment variable to point to the logical name of the
current directory, but traditional shells do not support this.
This can cause confusion if one shell instance maintains 'PWD' but
a subsidiary and different shell does not know about 'PWD' and
executes 'cd'; in this case 'PWD' points to the wrong directory.
Use '`pwd`' rather than '$PWD'.
'RANDOM'
Many shells provide 'RANDOM', a variable that returns a different
integer each time it is used. Most of the time, its value does not
change when it is not used, but on IRIX 6.5 the value changes all
the time. This can be observed by using 'set'. It is common
practice to use '$RANDOM' as part of a file name, but code
shouldn't rely on '$RANDOM' expanding to a nonempty string.
'status'
This variable is an alias to '$?' for 'zsh' (at least 3.1.6), hence
read-only. Do not use it.
File: autoconf.info, Node: Shell Functions, Next: Limitations of Builtins, Prev: Special Shell Variables, Up: Portable Shell
11.13 Shell Functions
=====================
Nowadays, it is difficult to find a shell that does not support shell
functions at all. However, some differences should be expected.
When declaring a shell function, you must include whitespace between
the ')' after the function name and the start of the compound
expression, to avoid upsetting 'ksh'. While it is possible to use any
compound command, most scripts use '{...}'.
$ /bin/sh -c 'a(){ echo hi;}; a'
hi
$ ksh -c 'a(){ echo hi;}; a'
ksh: syntax error at line 1: `}' unexpected
$ ksh -c 'a() { echo hi;}; a'
hi
Inside a shell function, you should not rely on the error status of a
subshell if the last command of that subshell was 'exit' or 'trap', as
this triggers bugs in zsh 4.x; while Autoconf tries to find a shell that
does not exhibit the bug, zsh might be the only shell present on the
user's machine.
Likewise, the state of '$?' is not reliable when entering a shell
function. This has the effect that using a function as the first
command in a 'trap' handler can cause problems.
$ bash -c 'foo() { echo $?; }; trap foo 0; (exit 2); exit 2'; echo $?
2
2
$ ash -c 'foo() { echo $?; }; trap foo 0; (exit 2); exit 2'; echo $?
0
2
DJGPP bash 2.04 has a bug in that 'return' from a shell function
which also used a command substitution causes a segmentation fault. To
work around the issue, you can use 'return' from a subshell, or
'AS_SET_STATUS' as last command in the execution flow of the function
(*note Common Shell Constructs::).
Not all shells treat shell functions as simple commands impacted by
'set -e', for example with Solaris 10 '/bin/sh':
$ bash -c 'f() { return 1; }; set -e; f; echo oops'
$ /bin/sh -c 'f() { return 1; }; set -e; f; echo oops'
oops
Shell variables and functions may share the same namespace, for
example with Solaris 10 '/bin/sh':
$ f () { :; }; f=; f
f: not found
For this reason, Autoconf (actually M4sh, *note Programming in M4sh::)
uses the prefix 'as_fn_' for its functions.
Handling of positional parameters and shell options varies among
shells. For example, Korn shells reset and restore trace output ('set
-x') and other options upon function entry and exit. Inside a function,
IRIX sh sets '$0' to the function name.
It is not portable to pass temporary environment variables to shell
functions. Solaris '/bin/sh' does not see the variable. Meanwhile, not
all shells follow the Posix rule that the assignment must affect the
current environment in the same manner as special built-ins.
$ /bin/sh -c 'func() { echo $a;}; a=1 func; echo $a'
=>
=>
$ ash -c 'func() { echo $a;}; a=1 func; echo $a'
=>1
=>
$ bash -c 'set -o posix; func() { echo $a;}; a=1 func; echo $a'
=>1
=>1
Some ancient Bourne shell variants with function support did not
reset '$I, I >= 0', upon function exit, so effectively the arguments of
the script were lost after the first function invocation. It is
probably not worth worrying about these shells any more.
With AIX sh, a 'trap' on 0 installed in a shell function triggers at
function exit rather than at script exit. *Note Limitations of Shell
Builtins: trap.
File: autoconf.info, Node: Limitations of Builtins, Next: Limitations of Usual Tools, Prev: Shell Functions, Up: Portable Shell
11.14 Limitations of Shell Builtins
===================================
No, no, we are serious: some shells do have limitations! :)
You should always keep in mind that any builtin or command may
support options, and therefore differ in behavior with arguments
starting with a dash. For instance, even the innocent 'echo "$word"'
can give unexpected results when 'word' starts with a dash. It is often
possible to avoid this problem using 'echo "x$word"', taking the 'x'
into account later in the pipe. Many of these limitations can be worked
around using M4sh (*note Programming in M4sh::).
'.'
Use '.' only with regular files (use 'test -f'). Bash 2.03, for
instance, chokes on '. /dev/null'. Remember that '.' uses 'PATH'
if its argument contains no slashes. Also, some shells, including
bash 3.2, implicitly append the current directory to this 'PATH'
search, even though Posix forbids it. So if you want to use '.' on
a file 'foo' in the current directory, you must use '. ./foo'.
Not all shells gracefully handle syntax errors within a sourced
file. On one extreme, some non-interactive shells abort the entire
script. On the other, 'zsh' 4.3.10 has a bug where it fails to
react to the syntax error.
$ echo 'fi' > syntax
$ bash -c '. ./syntax; echo $?'
./syntax: line 1: syntax error near unexpected token `fi'
./syntax: line 1: `fi'
1
$ ash -c '. ./syntax; echo $?'
./syntax: 1: Syntax error: "fi" unexpected
$ zsh -c '. ./syntax; echo $?'
./syntax:1: parse error near `fi'
0
'!'
The Unix version 7 shell did not support negating the exit status
of commands with '!', and this feature is still absent from some
shells (e.g., Solaris '/bin/sh'). Other shells, such as FreeBSD
'/bin/sh' or 'ash', have bugs when using '!':
$ sh -c '! : | :'; echo $?
1
$ ash -c '! : | :'; echo $?
0
$ sh -c '! { :; }'; echo $?
1
$ ash -c '! { :; }'; echo $?
{: not found
Syntax error: "}" unexpected
2
Shell code like this:
if ! cmp file1 file2 >/dev/null 2>&1; then
echo files differ or trouble
fi
is therefore not portable in practice. Typically it is easy to
rewrite such code, e.g.:
cmp file1 file2 >/dev/null 2>&1 ||
echo files differ or trouble
More generally, one can always rewrite '! COMMAND' as:
if COMMAND; then (exit 1); else :; fi
'{...}'
Bash 3.2 (and earlier versions) sometimes does not properly set
'$?' when failing to write redirected output of a compound command.
This problem is most commonly observed with '{...}'; it does not
occur with '(...)'. For example:
$ bash -c '{ echo foo; } >/bad; echo $?'
bash: line 1: /bad: Permission denied
0
$ bash -c 'while :; do echo; done >/bad; echo $?'
bash: line 1: /bad: Permission denied
0
To work around the bug, prepend ':;':
$ bash -c ':;{ echo foo; } >/bad; echo $?'
bash: line 1: /bad: Permission denied
1
Posix requires a syntax error if a brace list has no contents.
However, not all shells obey this rule; and on shells where empty
lists are permitted, the effect on '$?' is inconsistent. To avoid
problems, ensure that a brace list is never empty.
$ bash -c 'false; { }; echo $?' || echo $?
bash: line 1: syntax error near unexpected token `}'
bash: line 1: `false; { }; echo $?'
2
$ zsh -c 'false; { }; echo $?' || echo $?
1
$ pdksh -c 'false; { }; echo $?' || echo $?
0
'break'
The use of 'break 2' etc. is safe.
'case'
You don't need to quote the argument; no splitting is performed.
You don't need the final ';;', but you should use it.
Posix requires support for 'case' patterns with opening parentheses
like this:
case $file_name in
(*.c) echo "C source code";;
esac
but the '(' in this example is not portable to many Bourne shell
implementations, which is a pity for those of us using tools that
rely on balanced parentheses. For instance, with Solaris
'/bin/sh':
$ case foo in (foo) echo foo;; esac
error->syntax error: `(' unexpected
The leading '(' can be omitted safely. Unfortunately, there are
contexts where unbalanced parentheses cause other problems, such as
when using a syntax-highlighting editor that searches for the
balancing counterpart, or more importantly, when using a case
statement as an underquoted argument to an Autoconf macro. *Note
Balancing Parentheses::, for tradeoffs involved in various styles
of dealing with unbalanced ')'.
Zsh handles pattern fragments derived from parameter expansions or
command substitutions as though quoted:
$ pat=\?; case aa in ?$pat) echo match;; esac
$ pat=\?; case a? in ?$pat) echo match;; esac
match
Because of a bug in its 'fnmatch', Bash fails to properly handle
backslashes in character classes:
bash-2.02$ case /tmp in [/\\]*) echo OK;; esac
bash-2.02$
This is extremely unfortunate, since you are likely to use this
code to handle Posix or MS-DOS absolute file names. To work around
this bug, always put the backslash first:
bash-2.02$ case '\TMP' in [\\/]*) echo OK;; esac
OK
bash-2.02$ case /tmp in [\\/]*) echo OK;; esac
OK
Many Bourne shells cannot handle closing brackets in character
classes correctly.
Some shells also have problems with backslash escaping in case you
do not want to match the backslash: both a backslash and the
escaped character match this pattern. To work around this, specify
the character class in a variable, so that quote removal does not
apply afterwards, and the special characters don't have to be
backslash-escaped:
$ case '\' in [\<]) echo OK;; esac
OK
$ scanset='[<]'; case '\' in $scanset) echo OK;; esac
$
Even with this, Solaris 'ksh' matches a backslash if the set
contains any of the characters '|', '&', '(', or ')'.
Conversely, Tru64 'ksh' (circa 2003) erroneously always matches a
closing parenthesis if not specified in a character class:
$ case foo in *\)*) echo fail ;; esac
fail
$ case foo in *')'*) echo fail ;; esac
fail
Some shells, such as Ash 0.3.8, are confused by an empty
'case'/'esac':
ash-0.3.8 $ case foo in esac;
error->Syntax error: ";" unexpected (expecting ")")
Posix requires 'case' to give an exit status of 0 if no cases
match. However, '/bin/sh' in Solaris 10 does not obey this rule.
Meanwhile, it is unclear whether a case that matches, but contains
no statements, must also change the exit status to 0. The M4sh
macro 'AS_CASE' works around these inconsistencies.
$ bash -c 'case `false` in ?) ;; esac; echo $?'
0
$ /bin/sh -c 'case `false` in ?) ;; esac; echo $?'
255
'cd'
Posix 1003.1-2001 requires that 'cd' must support the '-L'
("logical") and '-P' ("physical") options, with '-L' being the
default. However, traditional shells do not support these options,
and their 'cd' command has the '-P' behavior.
Portable scripts should assume neither option is supported, and
should assume neither behavior is the default. This can be a bit
tricky, since the Posix default behavior means that, for example,
'ls ..' and 'cd ..' may refer to different directories if the
current logical directory is a symbolic link. It is safe to use
'cd DIR' if DIR contains no '..' components. Also,
Autoconf-generated scripts check for this problem when computing
variables like 'ac_top_srcdir' (*note Configuration Actions::), so
it is safe to 'cd' to these variables.
Posix states that behavior is undefined if 'cd' is given an
explicit empty argument. Some shells do nothing, some change to
the first entry in 'CDPATH', some change to 'HOME', and some exit
the shell rather than returning an error. Unfortunately, this
means that if '$var' is empty, then 'cd "$var"' is less predictable
than 'cd $var' (at least the latter is well-behaved in all shells
at changing to 'HOME', although this is probably not what you
wanted in a script). You should check that a directory name was
supplied before trying to change locations.
*Note Special Shell Variables::, for portability problems involving
'cd' and the 'CDPATH' environment variable. Also please see the
discussion of the 'pwd' command.
'echo'
The simple 'echo' is probably the most surprising source of
portability troubles. It is not possible to use 'echo' portably
unless both options and escape sequences are omitted. Don't expect
any option.
Do not use backslashes in the arguments, as there is no consensus
on their handling. For 'echo '\n' | wc -l', the 'sh' of Solaris
outputs 2, but Bash and Zsh (in 'sh' emulation mode) output 1. The
problem is truly 'echo': all the shells understand ''\n'' as the
string composed of a backslash and an 'n'. Within a command
substitution, 'echo 'string\c'' will mess up the internal state of
ksh88 on AIX 6.1 so that it will print the first character 's'
only, followed by a newline, and then entirely drop the output of
the next echo in a command substitution.
Because of these problems, do not pass a string containing
arbitrary characters to 'echo'. For example, 'echo "$foo"' is safe
only if you know that FOO's value cannot contain backslashes and
cannot start with '-'.
If this may not be true, 'printf' is in general safer and easier to
use than 'echo' and 'echo -n'. Thus, scripts where portability is
not a major concern should use 'printf '%s\n'' whenever 'echo'
could fail, and similarly use 'printf %s' instead of 'echo -n'.
For portable shell scripts, instead, it is suggested to use a
here-document like this:
cat <<EOF
$foo
EOF
Alternatively, M4sh provides 'AS_ECHO' and 'AS_ECHO_N' macros which
choose between various portable implementations: 'echo' or 'print'
where they work, 'printf' if it is available, or else other
creative tricks in order to work around the above problems.
'eval'
The 'eval' command is useful in limited circumstances, e.g., using
commands like 'eval table_$key=\$value' and 'eval value=table_$key'
to simulate a hash table when the key is known to be alphanumeric.
You should also be wary of common bugs in 'eval' implementations.
In some shell implementations (e.g., older 'ash', OpenBSD 3.8 'sh',
'pdksh' v5.2.14 99/07/13.2, and 'zsh' 4.2.5), the arguments of
'eval' are evaluated in a context where '$?' is 0, so they exhibit
behavior like this:
$ false; eval 'echo $?'
0
The correct behavior here is to output a nonzero value, but
portable scripts should not rely on this.
You should not rely on 'LINENO' within 'eval'. *Note Special Shell
Variables::.
Note that, even though these bugs are easily avoided, 'eval' is
tricky to use on arbitrary arguments. It is obviously unwise to
use 'eval $cmd' if the string value of 'cmd' was derived from an
untrustworthy source. But even if the string value is valid, 'eval
$cmd' might not work as intended, since it causes field splitting
and file name expansion to occur twice, once for the 'eval' and
once for the command itself. It is therefore safer to use 'eval
"$cmd"'. For example, if CMD has the value 'cat test?.c', 'eval
$cmd' might expand to the equivalent of 'cat test;.c' if there
happens to be a file named 'test;.c' in the current directory; and
this in turn mistakenly attempts to invoke 'cat' on the file 'test'
and then execute the command '.c'. To avoid this problem, use
'eval "$cmd"' rather than 'eval $cmd'.
However, suppose that you want to output the text of the evaluated
command just before executing it. Assuming the previous example,
'echo "Executing: $cmd"' outputs 'Executing: cat test?.c', but this
output doesn't show the user that 'test;.c' is the actual name of
the copied file. Conversely, 'eval "echo Executing: $cmd"' works
on this example, but it fails with 'cmd='cat foo >bar'', since it
mistakenly replaces the contents of 'bar' by the string 'cat foo'.
No simple, general, and portable solution to this problem is known.
'exec'
Posix describes several categories of shell built-ins. Special
built-ins (such as 'exit') must impact the environment of the
current shell, and need not be available through 'exec'. All other
built-ins are regular, and must not propagate variable assignments
to the environment of the current shell. However, the group of
regular built-ins is further distinguished by commands that do not
require a 'PATH' search (such as 'cd'), in contrast to built-ins
that are offered as a more efficient version of something that must
still be found in a 'PATH' search (such as 'echo'). Posix is not
clear on whether 'exec' must work with the list of 17 utilities
that are invoked without a 'PATH' search, and many platforms lack
an executable for some of those built-ins:
$ sh -c 'exec cd /tmp'
sh: line 0: exec: cd: not found
All other built-ins that provide utilities specified by Posix must
have a counterpart executable that exists on 'PATH', although Posix
allows 'exec' to use the built-in instead of the executable. For
example, contrast 'bash' 3.2 and 'pdksh' 5.2.14:
$ bash -c 'pwd --version' | head -n1
bash: line 0: pwd: --: invalid option
pwd: usage: pwd [-LP]
$ bash -c 'exec pwd --version' | head -n1
pwd (GNU coreutils) 6.10
$ pdksh -c 'exec pwd --version' | head -n1
pdksh: pwd: --: unknown option
When it is desired to avoid a regular shell built-in, the
workaround is to use some other forwarding command, such as 'env'
or 'nice', that will ensure a path search:
$ pdksh -c 'exec true --version' | head -n1
$ pdksh -c 'nice true --version' | head -n1
true (GNU coreutils) 6.10
$ pdksh -c 'env true --version' | head -n1
true (GNU coreutils) 6.10
'exit'
The default value of 'exit' is supposed to be '$?'; unfortunately,
some shells, such as the DJGPP port of Bash 2.04, just perform
'exit 0'.
bash-2.04$ foo=`exit 1` || echo fail
fail
bash-2.04$ foo=`(exit 1)` || echo fail
fail
bash-2.04$ foo=`(exit 1); exit` || echo fail
bash-2.04$
Using 'exit $?' restores the expected behavior.
Some shell scripts, such as those generated by 'autoconf', use a
trap to clean up before exiting. If the last shell command exited
with nonzero status, the trap also exits with nonzero status so
that the invoker can tell that an error occurred.
Unfortunately, in some shells, such as Solaris '/bin/sh', an exit
trap ignores the 'exit' command's argument. In these shells, a
trap cannot determine whether it was invoked by plain 'exit' or by
'exit 1'. Instead of calling 'exit' directly, use the
'AC_MSG_ERROR' macro that has a workaround for this problem.
'export'
The builtin 'export' dubs a shell variable "environment variable".
Each update of exported variables corresponds to an update of the
environment variables. Conversely, each environment variable
received by the shell when it is launched should be imported as a
shell variable marked as exported.
Alas, many shells, such as Solaris '/bin/sh', IRIX 6.3, IRIX 5.2,
AIX 4.1.5, and Digital Unix 4.0, forget to 'export' the environment
variables they receive. As a result, two variables coexist: the
environment variable and the shell variable. The following code
demonstrates this failure:
#!/bin/sh
echo $FOO
FOO=bar
echo $FOO
exec /bin/sh $0
when run with 'FOO=foo' in the environment, these shells print
alternately 'foo' and 'bar', although they should print only 'foo'
and then a sequence of 'bar's.
Therefore you should 'export' again each environment variable that
you update; the export can occur before or after the assignment.
Posix is not clear on whether the 'export' of an undefined variable
causes the variable to be defined with the value of an empty
string, or merely marks any future definition of a variable by that
name for export. Various shells behave differently in this regard:
$ sh -c 'export foo; env | grep foo'
$ ash -c 'export foo; env | grep foo'
foo=
Posix requires 'export' to honor assignments made as arguments, but
older shells do not support this, including '/bin/sh' in Solaris
10. Portable scripts should separate assignments and exports into
different statements.
$ bash -c 'export foo=bar; echo $foo'
bar
$ /bin/sh -c 'export foo=bar; echo $foo'
/bin/sh: foo=bar: is not an identifier
$ /bin/sh -c 'export foo; foo=bar; echo $foo'
bar
'false'
Don't expect 'false' to exit with status 1: in native Solaris
'/bin/false' exits with status 255.
'for'
To loop over positional arguments, use:
for arg
do
echo "$arg"
done
You may _not_ leave the 'do' on the same line as 'for', since some
shells improperly grok:
for arg; do
echo "$arg"
done
If you want to explicitly refer to the positional arguments, given
the '$@' bug (*note Shell Substitutions::), use:
for arg in ${1+"$@"}; do
echo "$arg"
done
But keep in mind that Zsh, even in Bourne shell emulation mode,
performs word splitting on '${1+"$@"}'; see *note Shell
Substitutions::, item '$@', for more.
In Solaris '/bin/sh', when the list of arguments of a 'for' loop
starts with _unquoted_ tokens looking like variable assignments,
the loop is not executed on those tokens:
$ /bin/sh -c 'for v in a=b c=d x e=f; do echo $v; done'
x
e=f
Thankfully, quoting the assignment-like tokens, or starting the
list with other tokens (including unquoted variable expansion that
results in an assignment-like result), avoids the problem, so it is
easy to work around:
$ /bin/sh -c 'for v in "a=b"; do echo $v; done'
a=b
$ /bin/sh -c 'x=a=b; for v in $x c=d; do echo $v; done'
a=b
c=d
'if'
Using '!' is not portable. Instead of:
if ! cmp -s file file.new; then
mv file.new file
fi
use:
if cmp -s file file.new; then :; else
mv file.new file
fi
Or, especially if the "else" branch is short, you can use '||'. In
M4sh, the 'AS_IF' macro provides an easy way to write these kinds
of conditionals:
AS_IF([cmp -s file file.new], [], [mv file.new file])
This is especially useful in other M4 macros, where the "then" and
"else" branches might be macro arguments.
Some very old shells did not reset the exit status from an 'if'
with no 'else':
$ if (exit 42); then true; fi; echo $?
42
whereas a proper shell should have printed '0'. But this is no
longer a portability problem; any shell that supports functions
gets it correct. However, it explains why some makefiles have
lengthy constructs:
if test -f "$file"; then
install "$file" "$dest"
else
:
fi
'printf'
A format string starting with a '-' can cause problems. Bash
interprets it as an option and gives an error. And '--' to mark
the end of options is not good in the NetBSD Almquist shell (e.g.,
0.4.6) which takes that literally as the format string. Putting
the '-' in a '%c' or '%s' is probably easiest:
printf %s -foo
Bash 2.03 mishandles an escape sequence that happens to evaluate to
'%':
$ printf '\045'
bash: printf: `%': missing format character
Large outputs may cause trouble. On Solaris 2.5.1 through 10, for
example, '/usr/bin/printf' is buggy, so when using '/bin/sh' the
command 'printf %010000x 123' normally dumps core.
Since 'printf' is not always a shell builtin, there is a potential
speed penalty for using 'printf '%s\n'' as a replacement for an
'echo' that does not interpret '\' or leading '-'. With Solaris
'ksh', it is possible to use 'print -r --' for this role instead.
*Note Limitations of Shell Builtins: echo. for a discussion of
portable alternatives to both 'printf' and 'echo'.
'pwd'
With modern shells, plain 'pwd' outputs a "logical" directory name,
some of whose components may be symbolic links. These directory
names are in contrast to "physical" directory names, whose
components are all directories.
Posix 1003.1-2001 requires that 'pwd' must support the '-L'
("logical") and '-P' ("physical") options, with '-L' being the
default. However, traditional shells do not support these options,
and their 'pwd' command has the '-P' behavior.
Portable scripts should assume neither option is supported, and
should assume neither behavior is the default. Also, on many hosts
'/bin/pwd' is equivalent to 'pwd -P', but Posix does not require
this behavior and portable scripts should not rely on it.
Typically it's best to use plain 'pwd'. On modern hosts this
outputs logical directory names, which have the following
advantages:
* Logical names are what the user specified.
* Physical names may not be portable from one installation host
to another due to network file system gymnastics.
* On modern hosts 'pwd -P' may fail due to lack of permissions
to some parent directory, but plain 'pwd' cannot fail for this
reason.
Also please see the discussion of the 'cd' command.
'read'
No options are portable, not even support '-r' (Solaris '/bin/sh'
for example). Tru64/OSF 5.1 'sh' treats 'read' as a special
built-in, so it may exit if input is redirected from a non-existent
or unreadable file.
'set'
With the FreeBSD 6.0 shell, the 'set' command (without any options)
does not sort its output.
The 'set' builtin faces the usual problem with arguments starting
with a dash. Modern shells such as Bash or Zsh understand '--' to
specify the end of the options (any argument after '--' is a
parameter, even '-x' for instance), but many traditional shells
(e.g., Solaris 10 '/bin/sh') simply stop option processing as soon
as a non-option argument is found. Therefore, use 'dummy' or
simply 'x' to end the option processing, and use 'shift' to pop it
out:
set x $my_list; shift
Avoid 'set -', e.g., 'set - $my_list'. Posix no longer requires
support for this command, and in traditional shells 'set -
$my_list' resets the '-v' and '-x' options, which makes scripts
harder to debug.
Some nonstandard shells do not recognize more than one option
(e.g., 'set -e -x' assigns '-x' to the command line). It is better
to combine them:
set -ex
The option '-e' has historically been underspecified, with enough
ambiguities to cause numerous differences across various shell
implementations; see for example this overview
(http://www.in-ulm.de/~mascheck/various/set-e/), or this link
(http://www.austingroupbugs.net/view.php?id=52), documenting a
change to Posix 2008 to match 'ksh88' behavior. Note that mixing
'set -e' and shell functions is asking for surprises:
set -e
doit()
{
rm file
echo one
}
doit || echo two
According to the recommendation, 'one' should always be output
regardless of whether the 'rm' failed, because it occurs within the
body of the shell function 'doit' invoked on the left side of '||',
where the effects of 'set -e' are not enforced. Likewise, 'two'
should never be printed, since the failure of 'rm' does not abort
the function, such that the status of 'doit' is 0.
The BSD shell has had several problems with the '-e' option. Older
versions of the BSD shell (circa 1990) mishandled '&&', '||', 'if',
and 'case' when '-e' was in effect, causing the shell to exit
unexpectedly in some cases. This was particularly a problem with
makefiles, and led to circumlocutions like 'sh -c 'test -f file ||
touch file'', where the seemingly-unnecessary 'sh -c '...'' wrapper
works around the bug (*note Failure in Make Rules::).
Even relatively-recent versions of the BSD shell (e.g., OpenBSD
3.4) wrongly exit with '-e' if the last command within a compound
statement fails and is guarded by an '&&' only. For example:
#! /bin/sh
set -e
foo=''
test -n "$foo" && exit 1
echo one
if :; then
test -n "$foo" && exit 1
echo two
test -n "$foo" && exit 1
fi
echo three
does not print 'three'. One workaround is to change the last
instance of 'test -n "$foo" && exit 1' to be 'if test -n "$foo";
then exit 1; fi' instead. Another possibility is to warn BSD users
not to use 'sh -e'.
When 'set -e' is in effect, a failed command substitution in
Solaris '/bin/sh' cannot be ignored, even with '||'.
$ /bin/sh -c 'set -e; foo=`false` || echo foo; echo bar'
$ bash -c 'set -e; foo=`false` || echo foo; echo bar'
foo
bar
Moreover, a command substitution, successful or not, causes this
shell to exit from a failing outer command even in presence of an
'&&' list:
$ bash -c 'set -e; false `true` && echo notreached; echo ok'
ok
$ sh -c 'set -e; false `true` && echo notreached; echo ok'
$
Portable scripts should not use 'set -e' if 'trap' is used to
install an exit handler. This is because Tru64/OSF 5.1 'sh'
sometimes enters the trap handler with the exit status of the
command prior to the one that triggered the errexit handler:
$ sh -ec 'trap '\''echo $?'\'' 0; false'
0
$ sh -c 'set -e; trap '\''echo $?'\'' 0; false'
1
Thus, when writing a script in M4sh, rather than trying to rely on
'set -e', it is better to append '|| AS_EXIT' to any statement
where it is desirable to abort on failure.
Job control is not provided by all shells, so the use of 'set -m'
or 'set -b' must be done with care. When using 'zsh' in native
mode, asynchronous notification ('set -b') is enabled by default,
and using 'emulate sh' to switch to Posix mode does not clear this
setting (although asynchronous notification has no impact unless
job monitoring is also enabled). Also, 'zsh' 4.3.10 and earlier
have a bug where job control can be manipulated in interactive
shells, but not in subshells or scripts. Furthermore, some shells,
like 'pdksh', fail to treat subshells as interactive, even though
the parent shell was.
$ echo $ZSH_VERSION
4.3.10
$ set -m; echo $?
0
$ zsh -c 'set -m; echo $?'
set: can't change option: -m
$ (set -m); echo $?
set: can't change option: -m
1
$ pdksh -ci 'echo $-; (echo $-)'
cim
c
Use of 'set -n' (typically via 'sh -n script') to validate a script
is not foolproof. Modern 'ksh93' tries to be helpful by informing
you about better syntax, but switching the script to use the
suggested syntax in order to silence the warnings would render the
script no longer portable to older shells:
$ ksh -nc '``'
ksh: warning: line 1: `...` obsolete, use $(...)
0
Furthermore, on ancient hosts, such as SunOS 4, 'sh -n' could go
into an infinite loop; even with that bug fixed, Solaris 8
'/bin/sh' takes extremely long to parse large scripts. Autoconf
itself uses 'sh -n' within its testsuite to check that correct
scripts were generated, but only after first probing for other
shell features (such as 'test -n "${BASH_VERSION+set}"') that
indicate a reasonably fast and working implementation.
'shift'
Not only is 'shift'ing a bad idea when there is nothing left to
shift, but in addition it is not portable: the shell of MIPS
RISC/OS 4.52 refuses to do it.
Don't use 'shift 2' etc.; while it in the SVR1 shell (1983), it is
also absent in many pre-Posix shells.
'source'
This command is not portable, as Posix does not require it; use '.'
instead.
'test'
The 'test' program is the way to perform many file and string
tests. It is often invoked by the alternate name '[', but using
that name in Autoconf code is asking for trouble since it is an M4
quote character.
The '-a', '-o', '(', and ')' operands are not present in all
implementations, and have been marked obsolete by Posix 2008. This
is because there are inherent ambiguities in using them. For
example, 'test "$1" -a "$2"' looks like a binary operator to check
whether two strings are both non-empty, but if '$1' is the literal
'!', then some implementations of 'test' treat it as a negation of
the unary operator '-a'.
Thus, portable uses of 'test' should never have more than four
arguments, and scripts should use shell constructs like '&&' and
'||' instead. If you combine '&&' and '||' in the same statement,
keep in mind that they have equal precedence, so it is often better
to parenthesize even when this is redundant. For example:
# Not portable:
test "X$a" = "X$b" -a \
'(' "X$c" != "X$d" -o "X$e" = "X$f" ')'
# Portable:
test "X$a" = "X$b" &&
{ test "X$c" != "X$d" || test "X$e" = "X$f"; }
'test' does not process options like most other commands do; for
example, it does not recognize the '--' argument as marking the end
of options.
It is safe to use '!' as a 'test' operator. For example, 'if test
! -d foo; ...' is portable even though 'if ! test -d foo; ...' is
not.
'test' (files)
To enable 'configure' scripts to support cross-compilation, they
shouldn't do anything that tests features of the build system
instead of the host system. But occasionally you may find it
necessary to check whether some arbitrary file exists. To do so,
use 'test -f', 'test -r', or 'test -x'. Do not use 'test -e',
because Solaris 10 '/bin/sh' lacks it. To test for symbolic links
on systems that have them, use 'test -h' rather than 'test -L';
either form conforms to Posix 1003.1-2001, but older shells like
Solaris 8 '/bin/sh' support only '-h'.
For historical reasons, Posix reluctantly allows implementations of
'test -x' that will succeed for the root user, even if no execute
permissions are present. Furthermore, shells do not all agree on
whether Access Control Lists should affect 'test -r', 'test -w',
and 'test -x'; some shells base test results strictly on the
current user id compared to file owner and mode, as if by
'stat(2)'; while other shells base test results on whether the
current user has the given right, even if that right is only
granted by an ACL, as if by 'faccessat(2)'. Furthermore, there is
a classic time of check to time of use race between any use of
'test' followed by operating on the just-checked file. Therefore,
it is a good idea to write scripts that actually attempt an
operation, and are prepared for the resulting failure if permission
is denied, rather than trying to avoid an operation based solely on
whether 'test' guessed that it might not be permitted.
'test' (strings)
Posix says that 'test "STRING"' succeeds if STRING is not null, but
this usage is not portable to traditional platforms like Solaris 10
'/bin/sh', which mishandle strings like '!' and '-n'.
Posix also says that 'test ! "STRING"', 'test -n "STRING"' and
'test -z "STRING"' work with any string, but many shells (such as
Solaris, AIX 3.2, UNICOS 10.0.0.6, Digital Unix 4, etc.) get
confused if STRING looks like an operator:
$ test -n =
test: argument expected
$ test ! -n
test: argument expected
$ test -z ")"; echo $?
0
Similarly, Posix says that both 'test "STRING1" = "STRING2"' and
'test "STRING1" != "STRING2"' work for any pairs of strings, but in
practice this is not true for troublesome strings that look like
operators or parentheses, or that begin with '-'.
It is best to protect such strings with a leading 'X', e.g., 'test
"XSTRING" != X' rather than 'test -n "STRING"' or 'test !
"STRING"'.
It is common to find variations of the following idiom:
test -n "`echo $ac_feature | sed 's/[-a-zA-Z0-9_]//g'`" &&
ACTION
to take an action when a token matches a given pattern. Such
constructs should be avoided by using:
case $ac_feature in
*[!-a-zA-Z0-9_]*) ACTION;;
esac
If the pattern is a complicated regular expression that cannot be
expressed as a shell pattern, use something like this instead:
expr "X$ac_feature" : 'X.*[^-a-zA-Z0-9_]' >/dev/null &&
ACTION
'expr "XFOO" : "XBAR"' is more robust than 'echo "XFOO" | grep
"^XBAR"', because it avoids problems when 'FOO' contains
backslashes.
'trap'
It is safe to trap at least the signals 1, 2, 13, and 15. You can
also trap 0, i.e., have the 'trap' run when the script ends (either
via an explicit 'exit', or the end of the script). The trap for 0
should be installed outside of a shell function, or AIX 5.3
'/bin/sh' will invoke the trap at the end of this function.
Posix says that 'trap - 1 2 13 15' resets the traps for the
specified signals to their default values, but many common shells
(e.g., Solaris '/bin/sh') misinterpret this and attempt to execute
a "command" named '-' when the specified conditions arise. Posix
2008 also added a requirement to support 'trap 1 2 13 15' to reset
traps, as this is supported by a larger set of shells, but there
are still shells like 'dash' that mistakenly try to execute '1'
instead of resetting the traps. Therefore, there is no portable
workaround, except for 'trap - 0', for which 'trap '' 0' is a
portable substitute.
Although Posix is not absolutely clear on this point, it is widely
admitted that when entering the trap '$?' should be set to the exit
status of the last command run before the trap. The ambiguity can
be summarized as: "when the trap is launched by an 'exit', what is
the _last_ command run: that before 'exit', or 'exit' itself?"
Bash considers 'exit' to be the last command, while Zsh and Solaris
'/bin/sh' consider that when the trap is run it is _still_ in the
'exit', hence it is the previous exit status that the trap
receives:
$ cat trap.sh
trap 'echo $?' 0
(exit 42); exit 0
$ zsh trap.sh
42
$ bash trap.sh
0
The portable solution is then simple: when you want to 'exit 42',
run '(exit 42); exit 42', the first 'exit' being used to set the
exit status to 42 for Zsh, and the second to trigger the trap and
pass 42 as exit status for Bash. In M4sh, this is covered by using
'AS_EXIT'.
The shell in FreeBSD 4.0 has the following bug: '$?' is reset to 0
by empty lines if the code is inside 'trap'.
$ trap 'false
echo $?' 0
$ exit
0
Fortunately, this bug only affects 'trap'.
Several shells fail to execute an exit trap that is defined inside
a subshell, when the last command of that subshell is not a
builtin. A workaround is to use 'exit $?' as the shell builtin.
$ bash -c '(trap "echo hi" 0; /bin/true)'
hi
$ /bin/sh -c '(trap "echo hi" 0; /bin/true)'
$ /bin/sh -c '(trap "echo hi" 0; /bin/true; exit $?)'
hi
Likewise, older implementations of 'bash' failed to preserve '$?'
across an exit trap consisting of a single cleanup command.
$ bash -c 'trap "/bin/true" 0; exit 2'; echo $?
2
$ bash-2.05b -c 'trap "/bin/true" 0; exit 2'; echo $?
0
$ bash-2.05b -c 'trap ":; /bin/true" 0; exit 2'; echo $?
2
'true'
Don't worry: as far as we know 'true' is portable. Nevertheless,
it's not always a builtin (e.g., Bash 1.x), and the portable shell
community tends to prefer using ':'. This has a funny side effect:
when asked whether 'false' is more portable than 'true' Alexandre
Oliva answered:
In a sense, yes, because if it doesn't exist, the shell will
produce an exit status of failure, which is correct for
'false', but not for 'true'.
Remember that even though ':' ignores its arguments, it still takes
time to compute those arguments. It is a good idea to use double
quotes around any arguments to ':' to avoid time spent in field
splitting and file name expansion.
'unset'
In some nonconforming shells (e.g., Solaris 10 '/bin/ksh' and
'/usr/xpg4/bin/sh', NetBSD 5.99.43 sh, or Bash 2.05a), 'unset FOO'
fails when 'FOO' is not set. This can interfere with 'set -e'
operation. You can use
FOO=; unset FOO
if you are not sure that 'FOO' is set.
A few ancient shells lack 'unset' entirely. For some variables
such as 'PS1', you can use a neutralizing value instead:
PS1='$ '
Usually, shells that do not support 'unset' need less effort to
make the environment sane, so for example is not a problem if you
cannot unset 'CDPATH' on those shells. However, Bash 2.01
mishandles 'unset MAIL' and 'unset MAILPATH' in some cases and
dumps core. So, you should do something like
( (unset MAIL) || exit 1) >/dev/null 2>&1 && unset MAIL || :
*Note Special Shell Variables::, for some neutralizing values.
Also, see *note Limitations of Builtins: export, for the case of
environment variables.
'wait'
The exit status of 'wait' is not always reliable.
File: autoconf.info, Node: Limitations of Usual Tools, Prev: Limitations of Builtins, Up: Portable Shell
11.15 Limitations of Usual Tools
================================
The small set of tools you can expect to find on any machine can still
include some limitations you should be aware of.
'awk'
Don't leave white space before the opening parenthesis in a user
function call. Posix does not allow this and GNU Awk rejects it:
$ gawk 'function die () { print "Aaaaarg!" }
BEGIN { die () }'
gawk: cmd. line:2: BEGIN { die () }
gawk: cmd. line:2: ^ parse error
$ gawk 'function die () { print "Aaaaarg!" }
BEGIN { die() }'
Aaaaarg!
Posix says that if a program contains only 'BEGIN' actions, and
contains no instances of 'getline', then the program merely
executes the actions without reading input. However, traditional
Awk implementations (such as Solaris 10 'awk') read and discard
input in this case. Portable scripts can redirect input from
'/dev/null' to work around the problem. For example:
awk 'BEGIN {print "hello world"}' </dev/null
Posix says that in an 'END' action, '$NF' (and presumably, '$1')
retain their value from the last record read, if no intervening
'getline' occurred. However, some implementations (such as Solaris
10 '/usr/bin/awk', 'nawk', or Darwin 'awk') reset these variables.
A workaround is to use an intermediate variable prior to the 'END'
block. For example:
$ cat end.awk
{ tmp = $1 }
END { print "a", $1, $NF, "b", tmp }
$ echo 1 | awk -f end.awk
a b 1
$ echo 1 | gawk -f end.awk
a 1 1 b 1
If you want your program to be deterministic, don't depend on 'for'
on arrays:
$ cat for.awk
END {
arr["foo"] = 1
arr["bar"] = 1
for (i in arr)
print i
}
$ gawk -f for.awk </dev/null
foo
bar
$ nawk -f for.awk </dev/null
bar
foo
Some Awk implementations, such as HP-UX 11.0's native one,
mishandle anchors:
$ echo xfoo | $AWK '/foo|^bar/ { print }'
$ echo bar | $AWK '/foo|^bar/ { print }'
bar
$ echo xfoo | $AWK '/^bar|foo/ { print }'
xfoo
$ echo bar | $AWK '/^bar|foo/ { print }'
bar
Either do not depend on such patterns (i.e., use '/^(.*foo|bar)/',
or use a simple test to reject such implementations.
On 'ia64-hp-hpux11.23', Awk mishandles 'printf' conversions after
'%u':
$ awk 'BEGIN { printf "%u %d\n", 0, -1 }'
0 0
AIX version 5.2 has an arbitrary limit of 399 on the length of
regular expressions and literal strings in an Awk program.
Traditional Awk implementations derived from Unix version 7, such
as Solaris '/bin/awk', have many limitations and do not conform to
Posix. Nowadays 'AC_PROG_AWK' (*note Particular Programs::) finds
you an Awk that doesn't have these problems, but if for some reason
you prefer not to use 'AC_PROG_AWK' you may need to address them.
For more detailed descriptions, see *note 'awk' language history:
(gawk)Language History.
Traditional Awk does not support multidimensional arrays or
user-defined functions.
Traditional Awk does not support the '-v' option. You can use
assignments after the program instead, e.g., '$AWK '{print v $1}'
v=x'; however, don't forget that such assignments are not evaluated
until they are encountered (e.g., after any 'BEGIN' action).
Traditional Awk does not support the keywords 'delete' or 'do'.
Traditional Awk does not support the expressions 'A?B:C', '!A',
'A^B', or 'A^=B'.
Traditional Awk does not support the predefined 'CONVFMT' or
'ENVIRON' variables.
Traditional Awk supports only the predefined functions 'exp',
'index', 'int', 'length', 'log', 'split', 'sprintf', 'sqrt', and
'substr'.
Traditional Awk 'getline' is not at all compatible with Posix;
avoid it.
Traditional Awk has 'for (i in a) ...' but no other uses of the
'in' keyword. For example, it lacks 'if (i in a) ...'.
In code portable to both traditional and modern Awk, 'FS' must be a
string containing just one ordinary character, and similarly for
the field-separator argument to 'split'.
Traditional Awk has a limit of 99 fields in a record. Since some
Awk implementations, like Tru64's, split the input even if you
don't refer to any field in the script, to circumvent this problem,
set 'FS' to an unusual character and use 'split'.
Traditional Awk has a limit of at most 99 bytes in a number
formatted by 'OFMT'; for example, 'OFMT="%.300e"; print 0.1;'
typically dumps core.
The original version of Awk had a limit of at most 99 bytes per
'split' field, 99 bytes per 'substr' substring, and 99 bytes per
run of non-special characters in a 'printf' format, but these bugs
have been fixed on all practical hosts that we know of.
HP-UX 11.00 and IRIX 6.5 Awk require that input files have a line
length of at most 3070 bytes.
'basename'
Not all hosts have a working 'basename'. You can use 'expr'
instead.
'cat'
Don't rely on any option.
'cc'
The command 'cc -c foo.c' traditionally produces an object file
named 'foo.o'. Most compilers allow '-c' to be combined with '-o'
to specify a different object file name, but Posix does not require
this combination and a few compilers lack support for it. *Note C
Compiler::, for how GNU Make tests for this feature with
'AC_PROG_CC_C_O'.
When a compilation such as 'cc -o foo foo.c' fails, some compilers
(such as CDS on Reliant Unix) leave a 'foo.o'.
HP-UX 'cc' doesn't accept '.S' files to preprocess and assemble.
'cc -c foo.S' appears to succeed, but in fact does nothing.
The default executable, produced by 'cc foo.c', can be
* 'a.out' -- usual Posix convention.
* 'b.out' -- i960 compilers (including 'gcc').
* 'a.exe' -- DJGPP port of 'gcc'.
* 'a_out.exe' -- GNV 'cc' wrapper for DEC C on OpenVMS.
* 'foo.exe' -- various MS-DOS compilers.
The C compiler's traditional name is 'cc', but other names like
'gcc' are common. Posix 1003.1-2001 specifies the name 'c99', but
older Posix editions specified 'c89' and anyway these standard
names are rarely used in practice. Typically the C compiler is
invoked from makefiles that use '$(CC)', so the value of the 'CC'
make variable selects the compiler name.
'chgrp'
'chown'
It is not portable to change a file's group to a group that the
owner does not belong to.
'chmod'
Avoid usages like 'chmod -w file'; use 'chmod a-w file' instead,
for two reasons. First, plain '-w' does not necessarily make the
file unwritable, since it does not affect mode bits that correspond
to bits in the file mode creation mask. Second, Posix says that
the '-w' might be interpreted as an implementation-specific option,
not as a mode; Posix suggests using 'chmod -- -w file' to avoid
this confusion, but unfortunately '--' does not work on some older
hosts.
'cmp'
'cmp' performs a raw data comparison of two files, while 'diff'
compares two text files. Therefore, if you might compare DOS
files, even if only checking whether two files are different, use
'diff' to avoid spurious differences due to differences of newline
encoding.
'cp'
Avoid the '-r' option, since Posix 1003.1-2004 marks it as
obsolescent and its behavior on special files is
implementation-defined. Use '-R' instead. On GNU hosts the two
options are equivalent, but on Solaris hosts (for example) 'cp -r'
reads from pipes instead of replicating them. AIX 5.3 'cp -R' may
corrupt its own memory with some directory hierarchies and error
out or dump core:
mkdir -p 12345678/12345678/12345678/12345678
touch 12345678/12345678/x
cp -R 12345678 t
cp: 0653-440 12345678/12345678/: name too long.
Some 'cp' implementations (e.g., BSD/OS 4.2) do not allow trailing
slashes at the end of nonexistent destination directories. To
avoid this problem, omit the trailing slashes. For example, use
'cp -R source /tmp/newdir' rather than 'cp -R source /tmp/newdir/'
if '/tmp/newdir' does not exist.
The ancient SunOS 4 'cp' does not support '-f', although its 'mv'
does.
Traditionally, file timestamps had 1-second resolution, and 'cp -p'
copied the timestamps exactly. However, many modern file systems
have timestamps with 1-nanosecond resolution. Unfortunately, some
older 'cp -p' implementations truncate timestamps when copying
files, which can cause the destination file to appear to be older
than the source. The exact amount of truncation depends on the
resolution of the system calls that 'cp' uses. Traditionally this
was 'utime', which has 1-second resolution. Less-ancient 'cp'
implementations such as GNU Core Utilities 5.0.91 (2003) use
'utimes', which has 1-microsecond resolution. Modern
implementations such as GNU Core Utilities 6.12 (2008) can set
timestamps to the full nanosecond resolution, using the modern
system calls 'futimens' and 'utimensat' when they are available.
As of 2011, though, many platforms do not yet fully support these
new system calls.
Bob Proulx notes that 'cp -p' always _tries_ to copy ownerships.
But whether it actually does copy ownerships or not is a system
dependent policy decision implemented by the kernel. If the kernel
allows it then it happens. If the kernel does not allow it then it
does not happen. It is not something 'cp' itself has control over.
In Unix System V any user can chown files to any other user, and
System V also has a non-sticky '/tmp'. That probably derives from
the heritage of System V in a business environment without hostile
users. BSD changed this to be a more secure model where only root
can 'chown' files and a sticky '/tmp' is used. That undoubtedly
derives from the heritage of BSD in a campus environment.
GNU/Linux and Solaris by default follow BSD, but can be configured
to allow a System V style 'chown'. On the other hand, HP-UX
follows System V, but can be configured to use the modern security
model and disallow 'chown'. Since it is an
administrator-configurable parameter you can't use the name of the
kernel as an indicator of the behavior.
'date'
Some versions of 'date' do not recognize special '%' directives,
and unfortunately, instead of complaining, they just pass them
through, and exit with success:
$ uname -a
OSF1 medusa.sis.pasteur.fr V5.1 732 alpha
$ date "+%s"
%s
'diff'
Option '-u' is nonportable.
Some implementations, such as Tru64's, fail when comparing to
'/dev/null'. Use an empty file instead.
'dirname'
Not all hosts have a working 'dirname', and you should instead use
'AS_DIRNAME' (*note Programming in M4sh::). For example:
dir=`dirname "$file"` # This is not portable.
dir=`AS_DIRNAME(["$file"])` # This is more portable.
'egrep'
Posix 1003.1-2001 no longer requires 'egrep', but many hosts do not
yet support the Posix replacement 'grep -E'. Also, some
traditional implementations do not work on long input lines. To
work around these problems, invoke 'AC_PROG_EGREP' and then use
'$EGREP'.
Portable extended regular expressions should use '\' only to escape
characters in the string '$()*+.?[\^{|'. For example, '\}' is not
portable, even though it typically matches '}'.
The empty alternative is not portable. Use '?' instead. For
instance with Digital Unix v5.0:
> printf "foo\n|foo\n" | $EGREP '^(|foo|bar)$'
|foo
> printf "bar\nbar|\n" | $EGREP '^(foo|bar|)$'
bar|
> printf "foo\nfoo|\n|bar\nbar\n" | $EGREP '^(foo||bar)$'
foo
|bar
'$EGREP' also suffers the limitations of 'grep' (*note Limitations
of Usual Tools: grep.).
'expr'
Not all implementations obey the Posix rule that '--' separates
options from arguments; likewise, not all implementations provide
the extension to Posix that the first argument can be treated as
part of a valid expression rather than an invalid option if it
begins with '-'. When performing arithmetic, use 'expr 0 + $var'
if '$var' might be a negative number, to keep 'expr' from
interpreting it as an option.
No 'expr' keyword starts with 'X', so use 'expr X"WORD" : 'XREGEX''
to keep 'expr' from misinterpreting WORD.
Don't use 'length', 'substr', 'match' and 'index'.
'expr' ('|')
You can use '|'. Although Posix does require that 'expr ''' return
the empty string, it does not specify the result when you '|'
together the empty string (or zero) with the empty string. For
example:
expr '' \| ''
Posix 1003.2-1992 returns the empty string for this case, but
traditional Unix returns '0' (Solaris is one such example). In
Posix 1003.1-2001, the specification was changed to match
traditional Unix's behavior (which is bizarre, but it's too late to
fix this). Please note that the same problem does arise when the
empty string results from a computation, as in:
expr bar : foo \| foo : bar
Avoid this portability problem by avoiding the empty string.
'expr' (':')
Portable 'expr' regular expressions should use '\' to escape only
characters in the string '$()*.0123456789[\^n{}'. For example,
alternation, '\|', is common but Posix does not require its
support, so it should be avoided in portable scripts. Similarly,
'\+' and '\?' should be avoided.
Portable 'expr' regular expressions should not begin with '^'.
Patterns are automatically anchored so leading '^' is not needed
anyway.
On the other hand, the behavior of the '$' anchor is not portable
on multi-line strings. Posix is ambiguous whether the anchor
applies to each line, as was done in older versions of the GNU Core
Utilities, or whether it applies only to the end of the overall
string, as in Coreutils 6.0 and most other implementations.
$ baz='foo
> bar'
$ expr "X$baz" : 'X\(foo\)$'
$ expr-5.97 "X$baz" : 'X\(foo\)$'
foo
The Posix standard is ambiguous as to whether 'expr 'a' : '\(b\)''
outputs '0' or the empty string. In practice, it outputs the empty
string on most platforms, but portable scripts should not assume
this. For instance, the QNX 4.25 native 'expr' returns '0'.
One might think that a way to get a uniform behavior would be to
use the empty string as a default value:
expr a : '\(b\)' \| ''
Unfortunately this behaves exactly as the original expression; see
the 'expr' ('|') entry for more information.
Some ancient 'expr' implementations (e.g., SunOS 4 'expr' and
Solaris 8 '/usr/ucb/expr') have a silly length limit that causes
'expr' to fail if the matched substring is longer than 120 bytes.
In this case, you might want to fall back on 'echo|sed' if 'expr'
fails. Nowadays this is of practical importance only for the rare
installer who mistakenly puts '/usr/ucb' before '/usr/bin' in
'PATH'.
On Mac OS X 10.4, 'expr' mishandles the pattern '[^-]' in some
cases. For example, the command
expr Xpowerpc-apple-darwin8.1.0 : 'X[^-]*-[^-]*-\(.*\)'
outputs 'apple-darwin8.1.0' rather than the correct 'darwin8.1.0'.
This particular case can be worked around by substituting '[^--]'
for '[^-]'.
Don't leave, there is some more!
The QNX 4.25 'expr', in addition of preferring '0' to the empty
string, has a funny behavior in its exit status: it's always 1 when
parentheses are used!
$ val=`expr 'a' : 'a'`; echo "$?: $val"
0: 1
$ val=`expr 'a' : 'b'`; echo "$?: $val"
1: 0
$ val=`expr 'a' : '\(a\)'`; echo "?: $val"
1: a
$ val=`expr 'a' : '\(b\)'`; echo "?: $val"
1: 0
In practice this can be a big problem if you are ready to catch
failures of 'expr' programs with some other method (such as using
'sed'), since you may get twice the result. For instance
$ expr 'a' : '\(a\)' || echo 'a' | sed 's/^\(a\)$/\1/'
outputs 'a' on most hosts, but 'aa' on QNX 4.25. A simple
workaround consists of testing 'expr' and using a variable set to
'expr' or to 'false' according to the result.
Tru64 'expr' incorrectly treats the result as a number, if it can
be interpreted that way:
$ expr 00001 : '.*\(...\)'
1
On HP-UX 11, 'expr' only supports a single sub-expression.
$ expr 'Xfoo' : 'X\(f\(oo\)*\)$'
expr: More than one '\(' was used.
'fgrep'
Posix 1003.1-2001 no longer requires 'fgrep', but many hosts do not
yet support the Posix replacement 'grep -F'. Also, some
traditional implementations do not work on long input lines. To
work around these problems, invoke 'AC_PROG_FGREP' and then use
'$FGREP'.
Tru64/OSF 5.1 'fgrep' does not match an empty pattern.
'find'
The option '-maxdepth' seems to be GNU specific. Tru64 v5.1,
NetBSD 1.5 and Solaris 'find' commands do not understand it.
The replacement of '{}' is guaranteed only if the argument is
exactly _{}_, not if it's only a part of an argument. For instance
on DU, and HP-UX 10.20 and HP-UX 11:
$ touch foo
$ find . -name foo -exec echo "{}-{}" \;
{}-{}
while GNU 'find' reports './foo-./foo'.
'grep'
Portable scripts can rely on the 'grep' options '-c', '-l', '-n',
and '-v', but should avoid other options. For example, don't use
'-w', as Posix does not require it and Irix 6.5.16m's 'grep' does
not support it. Also, portable scripts should not combine '-c'
with '-l', as Posix does not allow this.
Some of the options required by Posix are not portable in practice.
Don't use 'grep -q' to suppress output, because many 'grep'
implementations (e.g., Solaris) do not support '-q'. Don't use
'grep -s' to suppress output either, because Posix says '-s' does
not suppress output, only some error messages; also, the '-s'
option of traditional 'grep' behaved like '-q' does in most modern
implementations. Instead, redirect the standard output and
standard error (in case the file doesn't exist) of 'grep' to
'/dev/null'. Check the exit status of 'grep' to determine whether
it found a match.
The QNX4 implementation fails to count lines with 'grep -c '$'',
but works with 'grep -c '^''. Other alternatives for counting
lines are to use 'sed -n '$='' or 'wc -l'.
Some traditional 'grep' implementations do not work on long input
lines. On AIX the default 'grep' silently truncates long lines on
the input before matching.
Also, many implementations do not support multiple regexps with
'-e': they either reject '-e' entirely (e.g., Solaris) or honor
only the last pattern (e.g., IRIX 6.5 and NeXT). To work around
these problems, invoke 'AC_PROG_GREP' and then use '$GREP'.
Another possible workaround for the multiple '-e' problem is to
separate the patterns by newlines, for example:
grep 'foo
bar' in.txt
except that this fails with traditional 'grep' implementations and
with OpenBSD 3.8 'grep'.
Traditional 'grep' implementations (e.g., Solaris) do not support
the '-E' or '-F' options. To work around these problems, invoke
'AC_PROG_EGREP' and then use '$EGREP', and similarly for
'AC_PROG_FGREP' and '$FGREP'. Even if you are willing to require
support for Posix 'grep', your script should not use both '-E' and
'-F', since Posix does not allow this combination.
Portable 'grep' regular expressions should use '\' only to escape
characters in the string '$()*.0123456789[\^{}'. For example,
alternation, '\|', is common but Posix does not require its support
in basic regular expressions, so it should be avoided in portable
scripts. Solaris and HP-UX 'grep' do not support it. Similarly,
the following escape sequences should also be avoided: '\<', '\>',
'\+', '\?', '\`', '\'', '\B', '\b', '\S', '\s', '\W', and '\w'.
Posix does not specify the behavior of 'grep' on binary files. An
example where this matters is using BSD 'grep' to search text that
includes embedded ANSI escape sequences for colored output to
terminals ('\033[m' is the sequence to restore normal output); the
behavior depends on whether input is seekable:
$ printf 'esc\033[mape\n' > sample
$ grep . sample
Binary file sample matches
$ cat sample | grep .
escape
'join'
Solaris 8 'join' has bugs when the second operand is standard
input, and when standard input is a pipe. For example, the
following shell script causes Solaris 8 'join' to loop forever:
cat >file <<'EOF'
1 x
2 y
EOF
cat file | join file -
Use 'join - file' instead.
On NetBSD, 'join -a 1 file1 file2' mistakenly behaves like 'join -a
1 -a 2 1 file1 file2', resulting in a usage warning; the workaround
is to use 'join -a1 file1 file2' instead.
'ln'
Don't rely on 'ln' having a '-f' option. Symbolic links are not
available on old systems; use '$(LN_S)' as a portable substitute.
For versions of the DJGPP before 2.04, 'ln' emulates symbolic links
to executables by generating a stub that in turn calls the real
program. This feature also works with nonexistent files like in
the Posix spec. So 'ln -s file link' generates 'link.exe', which
attempts to call 'file.exe' if run. But this feature only works
for executables, so 'cp -p' is used instead for these systems.
DJGPP versions 2.04 and later have full support for symbolic links.
'ls'
The portable options are '-acdilrtu'. Current practice is for '-l'
to output both owner and group, even though ancient versions of
'ls' omitted the group.
On ancient hosts, 'ls foo' sent the diagnostic 'foo not found' to
standard output if 'foo' did not exist. Hence a shell command like
'sources=`ls *.c 2>/dev/null`' did not always work, since it was
equivalent to 'sources='*.c not found'' in the absence of '.c'
files. This is no longer a practical problem, since current 'ls'
implementations send diagnostics to standard error.
The behavior of 'ls' on a directory that is being concurrently
modified is not always predictable, because of a data race where
cached information returned by 'readdir' does not match the current
directory state. In fact, MacOS 10.5 has an intermittent bug where
'readdir', and thus 'ls', sometimes lists a file more than once if
other files were added or removed from the directory immediately
prior to the 'ls' call. Since 'ls' already sorts its output, the
duplicate entries can be avoided by piping the results through
'uniq'.
'mkdir'
No 'mkdir' option is portable to older systems. Instead of 'mkdir
-p FILE-NAME', you should use 'AS_MKDIR_P(FILE-NAME)' (*note
Programming in M4sh::) or 'AC_PROG_MKDIR_P' (*note Particular
Programs::).
Combining the '-m' and '-p' options, as in 'mkdir -m go-w -p DIR',
often leads to trouble. FreeBSD 'mkdir' incorrectly attempts to
change the permissions of DIR even if it already exists. HP-UX
11.23 and IRIX 6.5 'mkdir' often assign the wrong permissions to
any newly-created parents of DIR.
Posix does not clearly specify whether 'mkdir -p foo' should
succeed when 'foo' is a symbolic link to an already-existing
directory. The GNU Core Utilities 5.1.0 'mkdir' succeeds, but
Solaris 'mkdir' fails.
Traditional 'mkdir -p' implementations suffer from race conditions.
For example, if you invoke 'mkdir -p a/b' and 'mkdir -p a/c' at the
same time, both processes might detect that 'a' is missing, one
might create 'a', then the other might try to create 'a' and fail
with a 'File exists' diagnostic. The GNU Core Utilities
('fileutils' version 4.1), FreeBSD 5.0, NetBSD 2.0.2, and OpenBSD
2.4 are known to be race-free when two processes invoke 'mkdir -p'
simultaneously, but earlier versions are vulnerable. Solaris
'mkdir' is still vulnerable as of Solaris 10, and other traditional
Unix systems are probably vulnerable too. This possible race is
harmful in parallel builds when several Make rules call 'mkdir -p'
to construct directories. You may use 'install-sh -d' as a safe
replacement, provided this script is recent enough; the copy
shipped with Autoconf 2.60 and Automake 1.10 is OK, but copies from
older versions are vulnerable.
'mkfifo'
'mknod'
The GNU Coding Standards state that 'mknod' is safe to use on
platforms where it has been tested to exist; but it is generally
portable only for creating named FIFOs, since device numbers are
platform-specific. Autotest uses 'mkfifo' to implement parallel
testsuites. Posix states that behavior is unspecified when opening
a named FIFO for both reading and writing; on at least Cygwin, this
results in failure on any attempt to read or write to that file
descriptor.
'mktemp'
Shell scripts can use temporary files safely with 'mktemp', but it
does not exist on all systems. A portable way to create a safe
temporary file name is to create a temporary directory with mode
700 and use a file inside this directory. Both methods prevent
attackers from gaining control, though 'mktemp' is far less likely
to fail gratuitously under attack.
Here is sample code to create a new temporary directory '$dir'
safely:
# Create a temporary directory $dir in $TMPDIR (default /tmp).
# Use mktemp if possible; otherwise fall back on mkdir,
# with $RANDOM to make collisions less likely.
: "${TMPDIR:=/tmp}"
{
dir=`
(umask 077 && mktemp -d "$TMPDIR/fooXXXXXX") 2>/dev/null
` &&
test -d "$dir"
} || {
dir=$TMPDIR/foo$$-$RANDOM
(umask 077 && mkdir "$dir")
} || exit $?
'mv'
The only portable options are '-f' and '-i'.
Moving individual files between file systems is portable (it was in
Unix version 6), but it is not always atomic: when doing 'mv new
existing', there's a critical section where neither the old nor the
new version of 'existing' actually exists.
On some systems moving files from '/tmp' can sometimes cause
undesirable (but perfectly valid) warnings, even if you created
these files. This is because '/tmp' belongs to a group that
ordinary users are not members of, and files created in '/tmp'
inherit the group of '/tmp'. When the file is copied, 'mv' issues
a diagnostic without failing:
$ touch /tmp/foo
$ mv /tmp/foo .
error->mv: ./foo: set owner/group (was: 100/0): Operation not permitted
$ echo $?
0
$ ls foo
foo
This annoying behavior conforms to Posix, unfortunately.
Moving directories across mount points is not portable, use 'cp'
and 'rm'.
DOS variants cannot rename or remove open files, and do not support
commands like 'mv foo bar >foo', even though this is perfectly
portable among Posix hosts.
'od'
In Mac OS X 10.3, 'od' does not support the standard Posix options
'-A', '-j', '-N', or '-t', or the XSI option '-s'. The only
supported Posix option is '-v', and the only supported XSI options
are those in '-bcdox'. The BSD 'hexdump' program can be used
instead.
This problem no longer exists in Mac OS X 10.4.3.
'rm'
The '-f' and '-r' options are portable.
It is not portable to invoke 'rm' without options or operands. On
the other hand, Posix now requires 'rm -f' to silently succeed when
there are no operands (useful for constructs like 'rm -rf
$filelist' without first checking if '$filelist' was empty). But
this was not always portable; at least NetBSD 'rm' built before
2008 would fail with a diagnostic.
A file might not be removed even if its parent directory is
writable and searchable. Many Posix hosts cannot remove a mount
point, a named stream, a working directory, or a last link to a
file that is being executed.
DOS variants cannot rename or remove open files, and do not support
commands like 'rm foo >foo', even though this is perfectly portable
among Posix hosts.
'rmdir'
Just as with 'rm', some platforms refuse to remove a working
directory.
'sed'
Patterns should not include the separator (unless escaped), even as
part of a character class. In conformance with Posix, the Cray
'sed' rejects 's/[^/]*$//': use 's%[^/]*$%%'. Even when escaped,
patterns should not include separators that are also used as 'sed'
metacharacters. For example, GNU sed 4.0.9 rejects 's,x\{1\,\},,',
while sed 4.1 strips the backslash before the comma before
evaluating the basic regular expression.
Avoid empty patterns within parentheses (i.e., '\(\)'). Posix does
not require support for empty patterns, and Unicos 9 'sed' rejects
them.
Unicos 9 'sed' loops endlessly on patterns like '.*\n.*'.
Sed scripts should not use branch labels longer than 7 characters
and should not contain comments; AIX 5.3 'sed' rejects indented
comments. HP-UX sed has a limit of 99 commands (not counting ':'
commands) and 48 labels, which cannot be circumvented by using more
than one script file. It can execute up to 19 reads with the 'r'
command per cycle. Solaris '/usr/ucb/sed' rejects usages that
exceed a limit of about 6000 bytes for the internal representation
of commands.
Avoid redundant ';', as some 'sed' implementations, such as NetBSD
1.4.2's, incorrectly try to interpret the second ';' as a command:
$ echo a | sed 's/x/x/;;s/x/x/'
sed: 1: "s/x/x/;;s/x/x/": invalid command code ;
Some 'sed' implementations have a buffer limited to 4000 bytes, and
this limits the size of input lines, output lines, and internal
buffers that can be processed portably. Likewise, not all 'sed'
implementations can handle embedded 'NUL' or a missing trailing
newline.
Remember that ranges within a bracket expression of a regular
expression are only well-defined in the 'C' (or 'POSIX') locale.
Meanwhile, support for character classes like '[[:upper:]]' is not
yet universal, so if you cannot guarantee the setting of 'LC_ALL',
it is better to spell out a range '[ABCDEFGHIJKLMNOPQRSTUVWXYZ]'
than to rely on '[A-Z]'.
Additionally, Posix states that regular expressions are only
well-defined on characters. Unfortunately, there exist platforms
such as MacOS X 10.5 where not all 8-bit byte values are valid
characters, even though that platform has a single-byte 'C' locale.
And Posix allows the existence of a multi-byte 'C' locale, although
that does not yet appear to be a common implementation. At any
rate, it means that not all bytes will be matched by the regular
expression '.':
$ printf '\200\n' | LC_ALL=C sed -n /./p | wc -l
0
$ printf '\200\n' | LC_ALL=en_US.ISO8859-1 sed -n /./p | wc -l
1
Portable 'sed' regular expressions should use '\' only to escape
characters in the string '$()*.0123456789[\^n{}'. For example,
alternation, '\|', is common but Posix does not require its
support, so it should be avoided in portable scripts. Solaris
'sed' does not support alternation; e.g., 'sed '/a\|b/d'' deletes
only lines that contain the literal string 'a|b'. Similarly, '\+'
and '\?' should be avoided.
Anchors ('^' and '$') inside groups are not portable.
Nested parentheses in patterns (e.g., '\(\(a*\)b*)\)') are quite
portable to current hosts, but was not supported by some ancient
'sed' implementations like SVR3.
Some 'sed' implementations, e.g., Solaris, restrict the special
role of the asterisk '*' to one-character regular expressions and
back-references, and the special role of interval expressions
'\{M\}', '\{M,\}', or '\{M,N\}' to one-character regular
expressions. This may lead to unexpected behavior:
$ echo '1*23*4' | /usr/bin/sed 's/\(.\)*/x/g'
x2x4
$ echo '1*23*4' | /usr/xpg4/bin/sed 's/\(.\)*/x/g'
x
The '-e' option is mostly portable. However, its argument cannot
start with 'a', 'c', or 'i', as this runs afoul of a Tru64 5.1 bug.
Also, its argument cannot be empty, as this fails on AIX 5.3. Some
people prefer to use '-e':
sed -e 'COMMAND-1' \
-e 'COMMAND-2'
as opposed to the equivalent:
sed '
COMMAND-1
COMMAND-2
'
The following usage is sometimes equivalent:
sed 'COMMAND-1;COMMAND-2'
but Posix says that this use of a semicolon has undefined effect if
COMMAND-1's verb is '{', 'a', 'b', 'c', 'i', 'r', 't', 'w', ':', or
'#', so you should use semicolon only with simple scripts that do
not use these verbs.
Posix up to the 2008 revision requires the argument of the '-e'
option to be a syntactically complete script. GNU 'sed' allows to
pass multiple script fragments, each as argument of a separate '-e'
option, that are then combined, with newlines between the
fragments, and a future Posix revision may allow this as well.
This approach is not portable with script fragments ending in
backslash; for example, the 'sed' programs on Solaris 10, HP-UX 11,
and AIX don't allow splitting in this case:
$ echo a | sed -n -e 'i\
0'
0
$ echo a | sed -n -e 'i\' -e 0
Unrecognized command: 0
In practice, however, this technique of joining fragments through
'-e' works for multiple 'sed' functions within '{' and '}', even if
that is not specified by Posix:
$ echo a | sed -n -e '/a/{' -e s/a/b/ -e p -e '}'
b
Commands inside { } brackets are further restricted. Posix 2008
says that they cannot be preceded by addresses, '!', or ';', and
that each command must be followed immediately by a newline,
without any intervening blanks or semicolons. The closing bracket
must be alone on a line, other than white space preceding or
following it. However, a future version of Posix may standardize
the use of addresses within brackets.
Contrary to yet another urban legend, you may portably use '&' in
the replacement part of the 's' command to mean "what was matched".
All descendants of Unix version 7 'sed' (at least; we don't have
first hand experience with older 'sed' implementations) have
supported it.
Posix requires that you must not have any white space between '!'
and the following command. It is OK to have blanks between the
address and the '!'. For instance, on Solaris:
$ echo "foo" | sed -n '/bar/ ! p'
error->Unrecognized command: /bar/ ! p
$ echo "foo" | sed -n '/bar/! p'
error->Unrecognized command: /bar/! p
$ echo "foo" | sed -n '/bar/ !p'
foo
Posix also says that you should not combine '!' and ';'. If you
use '!', it is best to put it on a command that is delimited by
newlines rather than ';'.
Also note that Posix requires that the 'b', 't', 'r', and 'w'
commands be followed by exactly one space before their argument.
On the other hand, no white space is allowed between ':' and the
subsequent label name.
If a sed script is specified on the command line and ends in an
'a', 'c', or 'i' command, the last line of inserted text should be
followed by a newline. Otherwise some 'sed' implementations (e.g.,
OpenBSD 3.9) do not append a newline to the inserted text.
Many 'sed' implementations (e.g., MacOS X 10.4, OpenBSD 3.9,
Solaris 10 '/usr/ucb/sed') strip leading white space from the text
of 'a', 'c', and 'i' commands. Prepend a backslash to work around
this incompatibility with Posix:
$ echo flushleft | sed 'a\
> indented
> '
flushleft
indented
$ echo foo | sed 'a\
> \ indented
> '
flushleft
indented
Posix requires that with an empty regular expression, the last
non-empty regular expression from either an address specification
or substitution command is applied. However, busybox 1.6.1
complains when using a substitution command with a replacement
containing a back-reference to an empty regular expression; the
workaround is repeating the regular expression.
$ echo abc | busybox sed '/a\(b\)c/ s//\1/'
sed: No previous regexp.
$ echo abc | busybox sed '/a\(b\)c/ s/a\(b\)c/\1/'
b
'sed' ('t')
Some old systems have 'sed' that "forget" to reset their 't' flag
when starting a new cycle. For instance on MIPS RISC/OS, and on
IRIX 5.3, if you run the following 'sed' script (the line numbers
are not actual part of the texts):
s/keep me/kept/g # a
t end # b
s/.*/deleted/g # c
:end # d
on
delete me # 1
delete me # 2
keep me # 3
delete me # 4
you get
deleted
delete me
kept
deleted
instead of
deleted
deleted
kept
deleted
Why? When processing line 1, (c) matches, therefore sets the 't'
flag, and the output is produced. When processing line 2, the 't'
flag is still set (this is the bug). Command (a) fails to match,
but 'sed' is not supposed to clear the 't' flag when a substitution
fails. Command (b) sees that the flag is set, therefore it clears
it, and jumps to (d), hence you get 'delete me' instead of
'deleted'. When processing line (3), 't' is clear, (a) matches, so
the flag is set, hence (b) clears the flags and jumps. Finally,
since the flag is clear, line 4 is processed properly.
There are two things one should remember about 't' in 'sed'.
Firstly, always remember that 't' jumps if _some_ substitution
succeeded, not only the immediately preceding substitution.
Therefore, always use a fake 't clear' followed by a ':clear' on
the next line, to reset the 't' flag where needed.
Secondly, you cannot rely on 'sed' to clear the flag at each new
cycle.
One portable implementation of the script above is:
t clear
:clear
s/keep me/kept/g
t end
s/.*/deleted/g
:end
'sleep'
Using 'sleep' is generally portable. However, remember that adding
a 'sleep' to work around timestamp issues, with a minimum
granularity of one second, doesn't scale well for parallel builds
on modern machines with sub-second process completion.
'sort'
Remember that sort order is influenced by the current locale.
Inside 'configure', the C locale is in effect, but in Makefile
snippets, you may need to specify 'LC_ALL=C sort'.
'tar'
There are multiple file formats for 'tar'; if you use Automake, the
macro 'AM_INIT_AUTOMAKE' has some options controlling which level
of portability to use.
'touch'
If you specify the desired timestamp (e.g., with the '-r' option),
older 'touch' implementations use the 'utime' or 'utimes' system
call, which can result in the same kind of timestamp truncation
problems that 'cp -p' has.
On ancient BSD systems, 'touch' or any command that results in an
empty file does not update the timestamps, so use a command like
'echo' as a workaround. Also, GNU 'touch' 3.16r (and presumably
all before that) fails to work on SunOS 4.1.3 when the empty file
is on an NFS-mounted 4.2 volume. However, these problems are no
longer of practical concern.
'tr'
Not all versions of 'tr' handle all backslash character escapes.
For example, Solaris 10 '/usr/ucb/tr' falls over, even though
Solaris contains more modern 'tr' in other locations. Using octal
escapes is more portable for carriage returns, since '\015' is the
same for both ASCII and EBCDIC, and since use of literal carriage
returns in scripts causes a number of other problems. But for
other characters, like newline, using octal escapes ties the
operation to ASCII, so it is better to use literal characters.
$ { echo moon; echo light; } | /usr/ucb/tr -d '\n' ; echo
moo
light
$ { echo moon; echo light; } | /usr/bin/tr -d '\n' ; echo
moonlight
$ { echo moon; echo light; } | /usr/ucb/tr -d '\012' ; echo
moonlight
$ nl='
'; { echo moon; echo light; } | /usr/ucb/tr -d "$nl" ; echo
moonlight
Not all versions of 'tr' recognize direct ranges of characters: at
least Solaris '/usr/bin/tr' still fails to do so. But you can use
'/usr/xpg4/bin/tr' instead, or add brackets (which in Posix
transliterate to themselves).
$ echo "Hazy Fantazy" | LC_ALL=C /usr/bin/tr a-z A-Z
HAZy FAntAZy
$ echo "Hazy Fantazy" | LC_ALL=C /usr/bin/tr '[a-z]' '[A-Z]'
HAZY FANTAZY
$ echo "Hazy Fantazy" | LC_ALL=C /usr/xpg4/bin/tr a-z A-Z
HAZY FANTAZY
When providing two arguments, be sure the second string is at least
as long as the first.
$ echo abc | /usr/xpg4/bin/tr bc d
adc
$ echo abc | coreutils/tr bc d
add
Posix requires 'tr' to operate on binary files. But at least
Solaris '/usr/ucb/tr' and '/usr/bin/tr' silently discard 'NUL' in
the input prior to doing any translation. When using 'tr' to
process a binary file that may contain 'NUL' bytes, it is necessary
to use '/usr/xpg4/bin/tr' instead, or '/usr/xpg6/bin/tr' if that is
available.
$ printf 'a\0b' | /usr/ucb/tr x x | od -An -tx1
61 62
$ printf 'a\0b' | /usr/bin/tr x x | od -An -tx1
61 62
$ printf 'a\0b' | /usr/xpg4/bin/tr x x | od -An -tx1
61 00 62
Solaris '/usr/ucb/tr' additionally fails to handle '\0' as the
octal escape for 'NUL'.
$ printf 'abc' | /usr/ucb/tr 'bc' '\0d' | od -An -tx1
61 62 63
$ printf 'abc' | /usr/bin/tr 'bc' '\0d' | od -An -tx1
61 00 64
$ printf 'abc' | /usr/xpg4/bin/tr 'bc' '\0d' | od -An -tx1
61 00 64
File: autoconf.info, Node: Portable Make, Next: Portable C and C++, Prev: Portable Shell, Up: Top
12 Portable Make Programming
****************************
Writing portable makefiles is an art. Since a makefile's commands are
executed by the shell, you must consider the shell portability issues
already mentioned. However, other issues are specific to 'make' itself.
* Menu:
* $< in Ordinary Make Rules:: $< in ordinary rules
* Failure in Make Rules:: Failing portably in rules
* Special Chars in Names:: Special Characters in Macro Names
* Backslash-Newline-Empty:: Empty lines after backslash-newline
* Backslash-Newline Comments:: Spanning comments across line boundaries
* Long Lines in Makefiles:: Line length limitations
* Macros and Submakes:: 'make macro=value' and submakes
* The Make Macro MAKEFLAGS:: '$(MAKEFLAGS)' portability issues
* The Make Macro SHELL:: '$(SHELL)' portability issues
* Parallel Make:: Parallel 'make' quirks
* Comments in Make Rules:: Other problems with Make comments
* Newlines in Make Rules:: Using literal newlines in rules
* Comments in Make Macros:: Other problems with Make comments in macros
* Trailing whitespace in Make Macros:: Macro substitution problems
* Command-line Macros and whitespace:: Whitespace trimming of values
* obj/ and Make:: Don't name a subdirectory 'obj'
* make -k Status:: Exit status of 'make -k'
* VPATH and Make:: 'VPATH' woes
* Single Suffix Rules:: Single suffix rules and separated dependencies
* Timestamps and Make:: Subsecond timestamp resolution
File: autoconf.info, Node: $< in Ordinary Make Rules, Next: Failure in Make Rules, Up: Portable Make
12.1 '$<' in Ordinary Make Rules
================================
Posix says that the '$<' construct in makefiles can be used only in
inference rules and in the '.DEFAULT' rule; its meaning in ordinary
rules is unspecified. Solaris 'make' for instance replaces it with the
empty string. OpenBSD (3.0 and later) 'make' diagnoses these uses and
errors out.
File: autoconf.info, Node: Failure in Make Rules, Next: Special Chars in Names, Prev: $< in Ordinary Make Rules, Up: Portable Make
12.2 Failure in Make Rules
==========================
Posix 2008 requires that 'make' must invoke each command with the
equivalent of a 'sh -e -c' subshell, which causes the subshell to exit
immediately if a subsidiary simple-command fails, although not all
'make' implementations have historically followed this rule. For
example, the command 'touch T; rm -f U' may attempt to remove 'U' even
if the 'touch' fails, although this is not permitted with Posix make.
One way to work around failures in simple commands is to reword them so
that they always succeed, e.g., 'touch T || :; rm -f U'. However, even
this approach can run into common bugs in BSD implementations of the
'-e' option of 'sh' and 'set' (*note Limitations of Shell Builtins:
set.), so if you are worried about porting to buggy BSD shells it may be
simpler to migrate complicated 'make' actions into separate scripts.
File: autoconf.info, Node: Special Chars in Names, Next: Backslash-Newline-Empty, Prev: Failure in Make Rules, Up: Portable Make
12.3 Special Characters in Make Macro Names
===========================================
Posix limits macro names to nonempty strings containing only ASCII
letters and digits, '.', and '_'. Many 'make' implementations allow a
wider variety of characters, but portable makefiles should avoid them.
It is portable to start a name with a special character, e.g.,
'$(.FOO)'.
Some ancient 'make' implementations don't support leading underscores
in macro names. An example is NEWS-OS 4.2R.
$ cat Makefile
_am_include = #
_am_quote =
all:; @echo this is test
$ make
Make: Must be a separator on rules line 2. Stop.
$ cat Makefile2
am_include = #
am_quote =
all:; @echo this is test
$ make -f Makefile2
this is test
However, this problem is no longer of practical concern.
File: autoconf.info, Node: Backslash-Newline-Empty, Next: Backslash-Newline Comments, Prev: Special Chars in Names, Up: Portable Make
12.4 Backslash-Newline Before Empty Lines
=========================================
A bug in Bash 2.03 can cause problems if a Make rule contains a
backslash-newline followed by line that expands to nothing. For
example, on Solaris 8:
SHELL = /bin/bash
EMPTY =
foo:
touch foo \
$(EMPTY)
executes
/bin/bash -c 'touch foo \
'
which fails with a syntax error, due to the Bash bug. To avoid this
problem, avoid nullable macros in the last line of a multiline command.
On some versions of HP-UX, 'make' reads multiple newlines following a
backslash, continuing to the next non-empty line. For example,
FOO = one \
BAR = two
test:
: FOO is "$(FOO)"
: BAR is "$(BAR)"
shows 'FOO' equal to 'one BAR = two'. Other implementations sensibly
let a backslash continue only to the immediately following line.
File: autoconf.info, Node: Backslash-Newline Comments, Next: Long Lines in Makefiles, Prev: Backslash-Newline-Empty, Up: Portable Make
12.5 Backslash-Newline in Make Comments
=======================================
According to Posix, Make comments start with '#' and continue until an
unescaped newline is reached.
$ cat Makefile
# A = foo \
bar \
baz
all:
@echo ok
$ make # GNU make
ok
However this is not always the case. Some implementations discard
everything from '#' through the end of the line, ignoring any trailing
backslash.
$ pmake # BSD make
"Makefile", line 3: Need an operator
Fatal errors encountered -- cannot continue
Therefore, if you want to comment out a multi-line definition, prefix
each line with '#', not only the first.
# A = foo \
# bar \
# baz
File: autoconf.info, Node: Long Lines in Makefiles, Next: Macros and Submakes, Prev: Backslash-Newline Comments, Up: Portable Make
12.6 Long Lines in Makefiles
============================
Tru64 5.1's 'make' has been reported to crash when given a makefile with
lines longer than around 20 kB. Earlier versions are reported to exit
with 'Line too long' diagnostics.
File: autoconf.info, Node: Macros and Submakes, Next: The Make Macro MAKEFLAGS, Prev: Long Lines in Makefiles, Up: Portable Make
12.7 'make macro=value' and Submakes
====================================
A command-line variable definition such as 'foo=bar' overrides any
definition of 'foo' in a makefile. Some 'make' implementations (such as
GNU 'make') propagate this override to subsidiary invocations of 'make'.
Some other implementations do not pass the substitution along to
submakes.
$ cat Makefile
foo = foo
one:
@echo $(foo)
$(MAKE) two
two:
@echo $(foo)
$ make foo=bar # GNU make 3.79.1
bar
make two
make[1]: Entering directory `/home/adl'
bar
make[1]: Leaving directory `/home/adl'
$ pmake foo=bar # BSD make
bar
pmake two
foo
You have a few possibilities if you do want the 'foo=bar' override to
propagate to submakes. One is to use the '-e' option, which causes all
environment variables to have precedence over the makefile macro
definitions, and declare foo as an environment variable:
$ env foo=bar make -e
The '-e' option is propagated to submakes automatically, and since
the environment is inherited between 'make' invocations, the 'foo' macro
is overridden in submakes as expected.
This syntax ('foo=bar make -e') is portable only when used outside of
a makefile, for instance from a script or from the command line. When
run inside a 'make' rule, GNU 'make' 3.80 and prior versions forget to
propagate the '-e' option to submakes.
Moreover, using '-e' could have unexpected side effects if your
environment contains some other macros usually defined by the makefile.
(See also the note about 'make -e' and 'SHELL' below.)
If you can foresee all macros that a user might want to override,
then you can propagate them to submakes manually, from your makefile:
foo = foo
one:
@echo $(foo)
$(MAKE) foo=$(foo) two
two:
@echo $(foo)
Another way to propagate a variable to submakes in a portable way is
to expand an extra variable in every invocation of '$(MAKE)' within your
makefile:
foo = foo
one:
@echo $(foo)
$(MAKE) $(SUBMAKEFLAGS) two
two:
@echo $(foo)
Users must be aware that this technique is in use to take advantage
of it, e.g. with 'make foo=bar SUBMAKEFLAGS='foo=bar'', but it allows
any macro to be overridden. Makefiles generated by 'automake' use this
technique, expanding '$(AM_MAKEFLAGS)' on the command lines of submakes
(*note Automake: (automake)Subdirectories.).
File: autoconf.info, Node: The Make Macro MAKEFLAGS, Next: The Make Macro SHELL, Prev: Macros and Submakes, Up: Portable Make
12.8 The Make Macro MAKEFLAGS
=============================
Posix requires 'make' to use 'MAKEFLAGS' to affect the current and
recursive invocations of make, but allows implementations several
formats for the variable. It is tricky to parse '$MAKEFLAGS' to
determine whether '-s' for silent execution or '-k' for continued
execution are in effect. For example, you cannot assume that the first
space-separated word in '$MAKEFLAGS' contains single-letter options,
since in the Cygwin version of GNU 'make' it is either '--unix' or
'--win32' with the second word containing single-letter options.
$ cat Makefile
all:
@echo MAKEFLAGS = $(MAKEFLAGS)
$ make
MAKEFLAGS = --unix
$ make -k
MAKEFLAGS = --unix -k
File: autoconf.info, Node: The Make Macro SHELL, Next: Parallel Make, Prev: The Make Macro MAKEFLAGS, Up: Portable Make
12.9 The Make Macro 'SHELL'
===========================
Posix-compliant 'make' internally uses the '$(SHELL)' macro to spawn
shell processes and execute Make rules. This is a builtin macro
supplied by 'make', but it can be modified by a makefile or by a
command-line argument.
Not all 'make' implementations define this 'SHELL' macro. Tru64
'make' is an example; this implementation always uses '/bin/sh'. So
it's a good idea to always define 'SHELL' in your makefiles. If you use
Autoconf, do
SHELL = @SHELL@
If you use Automake, this is done for you.
Do not force 'SHELL = /bin/sh' because that is not correct
everywhere. Remember, '/bin/sh' is not Posix compliant on many systems,
such as FreeBSD 4, NetBSD 3, AIX 3, Solaris 10, or Tru64. Additionally,
DJGPP lacks '/bin/sh', and when its GNU 'make' port sees such a setting
it enters a special emulation mode where features like pipes and
redirections are emulated on top of DOS's 'command.com'. Unfortunately
this emulation is incomplete; for instance it does not handle command
substitutions. Using '@SHELL@' means that your makefile will benefit
from the same improved shell, such as 'bash' or 'ksh', that was
discovered during 'configure', so that you aren't fighting two different
sets of shell bugs between the two contexts.
Posix-compliant 'make' should never acquire the value of $(SHELL)
from the environment, even when 'make -e' is used (otherwise, think
about what would happen to your rules if 'SHELL=/bin/tcsh').
However not all 'make' implementations have this exception. For
instance it's not surprising that Tru64 'make' doesn't protect 'SHELL',
since it doesn't use it.
$ cat Makefile
SHELL = /bin/sh
FOO = foo
all:
@echo $(SHELL)
@echo $(FOO)
$ env SHELL=/bin/tcsh FOO=bar make -e # Tru64 Make
/bin/tcsh
bar
$ env SHELL=/bin/tcsh FOO=bar gmake -e # GNU make
/bin/sh
bar
Conversely, 'make' is not supposed to export any changes to the macro
'SHELL' to child processes. Again, many implementations break this
rule:
$ cat Makefile
all:
@echo $(SHELL)
@printenv SHELL
$ env SHELL=sh make -e SHELL=/bin/ksh # BSD Make, GNU make 3.80
/bin/ksh
/bin/ksh
$ env SHELL=sh gmake -e SHELL=/bin/ksh # GNU make 3.81
/bin/ksh
sh
File: autoconf.info, Node: Parallel Make, Next: Comments in Make Rules, Prev: The Make Macro SHELL, Up: Portable Make
12.10 Parallel Make
===================
Support for parallel execution in 'make' implementation varies.
Generally, using GNU make is your best bet.
When NetBSD or FreeBSD 'make' are run in parallel mode, they will
reuse the same shell for multiple commands within one recipe. This can
have various unexpected consequences. For example, changes of
directories or variables persist between recipes, so that:
all:
@var=value; cd /; pwd; echo $$var; echo $$$$
@pwd; echo $$var; echo $$$$
may output the following with 'make -j1', at least on NetBSD up to 5.1
and FreeBSD up to 8.2:
/
value
32235
/
value
32235
while without '-j1', or with '-B', the output looks less surprising:
/
value
32238
/tmp
32239
Another consequence is that, if one command in a recipe uses 'exit 0' to
indicate a successful exit, the shell will be gone and the remaining
commands of this recipe will not be executed.
The BSD 'make' implementations, when run in parallel mode, will also
pass the 'Makefile' recipes to the shell through its standard input,
thus making it unusable from the recipes:
$ cat Makefile
read:
@read line; echo LINE: $$line
$ echo foo | make read
LINE: foo
$ echo foo | make -j1 read # NetBSD 5.1 and FreeBSD 8.2
LINE:
Moreover, when FreeBSD 'make' (up at least to 8.2) is run in parallel
mode, it implements the '@' and '-' "recipe modifiers" by dynamically
modifying the active shell flags. This behavior has the effects of
potentially clobbering the exit status of recipes silenced with the '@'
modifier if they also unset the 'errexit' shell flag, and of mangling
the output in unexpected ways:
$ cat Makefile
a:
@echo $$-; set +e; false
b:
-echo $$-; false; echo set -
$ make a; echo status: $?
ehBc
*** Error code 1
status: 1
$ make -j1 a; echo status: $?
ehB
status: 0
$ make b
echo $-; echo set -
hBc
set -
$ make -j1 b
echo $-; echo hvB
You can avoid all these issues by using the '-B' option to enable
compatibility semantics. However, that will effectively also disable
all parallelism as that will cause prerequisites to be updated in the
order they are listed in a rule.
Some make implementations (among them, FreeBSD 'make', NetBSD 'make',
and Solaris 'dmake'), when invoked with a '-jN' option, connect the
standard output and standard error of all their child processes to pipes
or temporary regular files. This can lead to subtly different semantics
in the behavior of the spawned processes. For example, even if the
'make' standard output is connected to a tty, the recipe command will
not be:
$ cat Makefile
all:
@test -t 1 && echo "Is a tty" || echo "Is not a tty"
$ make -j 2 # FreeBSD 8.2 make
Is not a tty
$ make -j 2 # NetBSD 5.1 make
--- all ---
Is not a tty
$ dmake -j 2 # Solaris 10 dmake
HOSTNAME --> 1 job
HOSTNAME --> Job output
Is not a tty
On the other hand:
$ make -j 2 # GNU make, Heirloom make
Is a tty
The above examples also show additional status output produced in
parallel mode for targets being updated by Solaris 'dmake' and NetBSD
'make' (but _not_ by FreeBSD 'make').
Furthermore, parallel runs of those 'make' implementations will route
standard error from commands that they spawn into their own standard
output, and may remove leading whitespace from output lines.
File: autoconf.info, Node: Comments in Make Rules, Next: Newlines in Make Rules, Prev: Parallel Make, Up: Portable Make
12.11 Comments in Make Rules
============================
Never put comments in a rule.
Some 'make' treat anything starting with a tab as a command for the
current rule, even if the tab is immediately followed by a '#'. The
'make' from Tru64 Unix V5.1 is one of them. The following makefile runs
'# foo' through the shell.
all:
# foo
As a workaround, you can use the ':' no-op command with a string
argument that gets ignored:
all:
: "foo"
Conversely, if you want to use the '#' character in some command, you
can only do so by expanding it inside a rule (*note Comments in Make
Macros::). So for example, if 'COMMENT_CHAR' is substituted by
'config.status' as '#', then the following substitutes '@COMMENT_CHAR@'
in a generated header:
foo.h: foo.h.in
sed -e 's|@''COMMENT_CHAR''@|@COMMENT_CHAR@|g' \
$(srcdir)/foo.h.in > $@
The funny shell quoting avoids a substitution at 'config.status' run
time of the left-hand side of the 'sed' 's' command.
File: autoconf.info, Node: Newlines in Make Rules, Next: Comments in Make Macros, Prev: Comments in Make Rules, Up: Portable Make
12.12 Newlines in Make Rules
============================
In shell scripts, newlines can be used inside string literals. But in
the shell statements of 'Makefile' rules, this is not possible: A
newline not preceded by a backslash is a separator between shell
statements. Whereas a newline that is preceded by a backslash becomes
part of the shell statement according to POSIX, but gets replaced,
together with the backslash that precedes it, by a space in GNU 'make'
3.80 and older. So, how can a newline be used in a string literal?
The trick is to set up a shell variable that contains a newline:
nlinit=`echo 'nl="'; echo '"'`; eval "$$nlinit"
For example, in order to create a multiline 'sed' expression that
inserts a blank line after every line of a file, this code can be used:
nlinit=`echo 'nl="'; echo '"'`; eval "$$nlinit"; \
sed -e "s/\$$/\\$${nl}/" < input > output
File: autoconf.info, Node: Comments in Make Macros, Next: Trailing whitespace in Make Macros, Prev: Newlines in Make Rules, Up: Portable Make
12.13 Comments in Make Macros
=============================
Avoid putting comments in macro values as far as possible. Posix
specifies that the text starting from the '#' sign until the end of the
line is to be ignored, which has the unfortunate effect of disallowing
them even within quotes. Thus, the following might lead to a syntax
error at compile time:
CPPFLAGS = "-DCOMMENT_CHAR='#'"
as 'CPPFLAGS' may be expanded to '"-DCOMMENT_CHAR=''.
Most 'make' implementations disregard this and treat single and
double quotes specially here. Also, GNU 'make' lets you put '#' into a
macro value by escaping it with a backslash, i.e., '\#'. However,
neither of these usages are portable. *Note Comments in Make Rules::,
for a portable alternative.
Even without quoting involved, comments can have surprising effects,
because the whitespace before them is part of the variable value:
foo = bar # trailing comment
print: ; @echo "$(foo)."
prints 'bar .', which is usually not intended, and can expose 'make'
bugs as described below.
File: autoconf.info, Node: Trailing whitespace in Make Macros, Next: Command-line Macros and whitespace, Prev: Comments in Make Macros, Up: Portable Make
12.14 Trailing whitespace in Make Macros
========================================
GNU 'make' 3.80 mistreats trailing whitespace in macro substitutions and
appends another spurious suffix:
empty =
foo = bar $(empty)
print: ; @echo $(foo:=.test)
prints 'bar.test .test'.
BSD and Solaris 'make' implementations do not honor trailing
whitespace in macro definitions as Posix requires:
foo = bar # Note the space after "bar".
print: ; @echo $(foo)t
prints 'bart' instead of 'bar t'. To work around this, you can use a
helper macro as in the previous example.
File: autoconf.info, Node: Command-line Macros and whitespace, Next: obj/ and Make, Prev: Trailing whitespace in Make Macros, Up: Portable Make
12.15 Command-line Macros and whitespace
========================================
Some 'make' implementations may strip trailing whitespace off of macros
set on the command line in addition to leading whitespace. Further,
some may strip leading whitespace off of macros set from environment
variables:
$ echo 'print: ; @echo "x$(foo)x$(bar)x"' |
foo=' f f ' make -f - bar=' b b '
x f f xb b x # AIX, BSD, GNU make
xf f xb b x # HP-UX, IRIX, Tru64/OSF make
x f f xb bx # Solaris make
File: autoconf.info, Node: obj/ and Make, Next: make -k Status, Prev: Command-line Macros and whitespace, Up: Portable Make
12.16 The 'obj/' Subdirectory and Make
======================================
Never name one of your subdirectories 'obj/' if you don't like
surprises.
If an 'obj/' directory exists, BSD 'make' enters it before reading
the makefile. Hence the makefile in the current directory is not read.
$ cat Makefile
all:
echo Hello
$ cat obj/Makefile
all:
echo World
$ make # GNU make
echo Hello
Hello
$ pmake # BSD make
echo World
World
File: autoconf.info, Node: make -k Status, Next: VPATH and Make, Prev: obj/ and Make, Up: Portable Make
12.17 Exit Status of 'make -k'
==============================
Do not rely on the exit status of 'make -k'. Some implementations
reflect whether they encountered an error in their exit status; other
implementations always succeed.
$ cat Makefile
all:
false
$ make -k; echo exit status: $? # GNU make
false
make: *** [all] Error 1
exit status: 2
$ pmake -k; echo exit status: $? # BSD make
false
*** Error code 1 (continuing)
exit status: 0
File: autoconf.info, Node: VPATH and Make, Next: Single Suffix Rules, Prev: make -k Status, Up: Portable Make
12.18 'VPATH' and Make
======================
Posix does not specify the semantics of 'VPATH'. Typically, 'make'
supports 'VPATH', but its implementation is not consistent.
Autoconf and Automake support makefiles whose usages of 'VPATH' are
portable to recent-enough popular implementations of 'make', but to keep
the resulting makefiles portable, a package's makefile prototypes must
take the following issues into account. These issues are complicated
and are often poorly understood, and installers who use 'VPATH' should
expect to find many bugs in this area. If you use 'VPATH', the simplest
way to avoid these portability bugs is to stick with GNU 'make', since
it is the most commonly-used 'make' among Autoconf users.
Here are some known issues with some 'VPATH' implementations.
* Menu:
* Variables listed in VPATH:: 'VPATH' must be literal on ancient hosts
* VPATH and Double-colon:: Problems with '::' on ancient hosts
* $< in Explicit Rules:: '$<' does not work in ordinary rules
* Automatic Rule Rewriting:: 'VPATH' goes wild on Solaris
* Tru64 Directory Magic:: 'mkdir' goes wild on Tru64
* Make Target Lookup:: More details about 'VPATH' lookup
File: autoconf.info, Node: Variables listed in VPATH, Next: VPATH and Double-colon, Up: VPATH and Make
12.18.1 Variables listed in 'VPATH'
-----------------------------------
Do not set 'VPATH' to the value of another variable, for example 'VPATH
= $(srcdir)', because some ancient versions of 'make' do not do variable
substitutions on the value of 'VPATH'. For example, use this
srcdir = @srcdir@
VPATH = @srcdir@
rather than 'VPATH = $(srcdir)'. Note that with GNU Automake, there is
no need to set this yourself.
File: autoconf.info, Node: VPATH and Double-colon, Next: $< in Explicit Rules, Prev: Variables listed in VPATH, Up: VPATH and Make
12.18.2 'VPATH' and Double-colon Rules
--------------------------------------
With ancient versions of Sun 'make', any assignment to 'VPATH' causes
'make' to execute only the first set of double-colon rules. However,
this problem is no longer of practical concern.
File: autoconf.info, Node: $< in Explicit Rules, Next: Automatic Rule Rewriting, Prev: VPATH and Double-colon, Up: VPATH and Make
12.18.3 '$<' Not Supported in Explicit Rules
--------------------------------------------
Using '$<' in explicit rules is not portable. The prerequisite file
must be named explicitly in the rule. If you want to find the
prerequisite via a 'VPATH' search, you have to code the whole thing
manually. *Note Build Directories::.
File: autoconf.info, Node: Automatic Rule Rewriting, Next: Tru64 Directory Magic, Prev: $< in Explicit Rules, Up: VPATH and Make
12.18.4 Automatic Rule Rewriting
--------------------------------
Some 'make' implementations, such as Solaris and Tru64, search for
prerequisites in 'VPATH' and then rewrite each occurrence as a plain
word in the rule. For instance:
# This isn't portable to GNU make.
VPATH = ../pkg/src
f.c: if.c
cp if.c f.c
executes 'cp ../pkg/src/if.c f.c' if 'if.c' is found in '../pkg/src'.
However, this rule leads to real problems in practice. For example,
if the source directory contains an ordinary file named 'test' that is
used in a dependency, Solaris 'make' rewrites commands like 'if test -r
foo; ...' to 'if ../pkg/src/test -r foo; ...', which is typically
undesirable. In fact, 'make' is completely unaware of shell syntax used
in the rules, so the VPATH rewrite can potentially apply to _any_
whitespace-separated word in a rule, including shell variables,
functions, and keywords.
$ mkdir build
$ cd build
$ cat > Makefile <<'END'
VPATH = ..
all: arg func for echo
func () { for arg in "$$@"; do echo $$arg; done; }; \
func "hello world"
END
$ touch ../arg ../func ../for ../echo
$ make
../func () { ../for ../arg in "$@"; do ../echo $arg; done; }; \
../func "hello world"
sh: syntax error at line 1: `do' unexpected
*** Error code 2
To avoid this problem, portable makefiles should never mention a source
file or dependency whose name is that of a shell keyword like 'for' or
'until', a shell command like 'cat' or 'gcc' or 'test', or a shell
function or variable used in the corresponding 'Makefile' recipe.
Because of these problems GNU 'make' and many other 'make'
implementations do not rewrite commands, so portable makefiles should
search 'VPATH' manually. It is tempting to write this:
# This isn't portable to Solaris make.
VPATH = ../pkg/src
f.c: if.c
cp `test -f if.c || echo $(VPATH)/`if.c f.c
However, the "prerequisite rewriting" still applies here. So if 'if.c'
is in '../pkg/src', Solaris and Tru64 'make' execute
cp `test -f ../pkg/src/if.c || echo ../pkg/src/`if.c f.c
which reduces to
cp if.c f.c
and thus fails. Oops.
A simple workaround, and good practice anyway, is to use '$?' and
'$@' when possible:
VPATH = ../pkg/src
f.c: if.c
cp $? $@
but this does not generalize well to commands with multiple
prerequisites. A more general workaround is to rewrite the rule so that
the prerequisite 'if.c' never appears as a plain word. For example,
these three rules would be safe, assuming 'if.c' is in '../pkg/src' and
the other files are in the working directory:
VPATH = ../pkg/src
f.c: if.c f1.c
cat `test -f ./if.c || echo $(VPATH)/`if.c f1.c >$@
g.c: if.c g1.c
cat `test -f 'if.c' || echo $(VPATH)/`if.c g1.c >$@
h.c: if.c h1.c
cat `test -f "if.c" || echo $(VPATH)/`if.c h1.c >$@
Things get worse when your prerequisites are in a macro.
VPATH = ../pkg/src
HEADERS = f.h g.h h.h
install-HEADERS: $(HEADERS)
for i in $(HEADERS); do \
$(INSTALL) -m 644 \
`test -f $$i || echo $(VPATH)/`$$i \
$(DESTDIR)$(includedir)/$$i; \
done
The above 'install-HEADERS' rule is not Solaris-proof because 'for i
in $(HEADERS);' is expanded to 'for i in f.h g.h h.h;' where 'f.h' and
'g.h' are plain words and are hence subject to 'VPATH' adjustments.
If the three files are in '../pkg/src', the rule is run as:
for i in ../pkg/src/f.h ../pkg/src/g.h h.h; do \
install -m 644 \
`test -f $i || echo ../pkg/src/`$i \
/usr/local/include/$i; \
done
where the two first 'install' calls fail. For instance, consider the
'f.h' installation:
install -m 644 \
`test -f ../pkg/src/f.h || \
echo ../pkg/src/ \
`../pkg/src/f.h \
/usr/local/include/../pkg/src/f.h;
It reduces to:
install -m 644 \
../pkg/src/f.h \
/usr/local/include/../pkg/src/f.h;
Note that the manual 'VPATH' search did not cause any problems here;
however this command installs 'f.h' in an incorrect directory.
Trying to quote '$(HEADERS)' in some way, as we did for 'foo.c' a few
makefiles ago, does not help:
install-HEADERS: $(HEADERS)
headers='$(HEADERS)'; \
for i in $$headers; do \
$(INSTALL) -m 644 \
`test -f $$i || echo $(VPATH)/`$$i \
$(DESTDIR)$(includedir)/$$i; \
done
Now, 'headers='$(HEADERS)'' macro-expands to:
headers='f.h g.h h.h'
but 'g.h' is still a plain word. (As an aside, the idiom
'headers='$(HEADERS)'; for i in $$headers;' is a good idea if
'$(HEADERS)' can be empty, because some shells diagnose a syntax error
on 'for i in;'.)
One workaround is to strip this unwanted '../pkg/src/' prefix
manually:
VPATH = ../pkg/src
HEADERS = f.h g.h h.h
install-HEADERS: $(HEADERS)
headers='$(HEADERS)'; \
for i in $$headers; do \
i=`expr "$$i" : '$(VPATH)/\(.*\)'`;
$(INSTALL) -m 644 \
`test -f $$i || echo $(VPATH)/`$$i \
$(DESTDIR)$(includedir)/$$i; \
done
Automake does something similar. However the above hack works only
if the files listed in 'HEADERS' are in the current directory or a
subdirectory; they should not be in an enclosing directory. If we had
'HEADERS = ../f.h', the above fragment would fail in a VPATH build with
Tru64 'make'. The reason is that not only does Tru64 'make' rewrite
dependencies, but it also simplifies them. Hence '../f.h' becomes
'../pkg/f.h' instead of '../pkg/src/../f.h'. This obviously defeats any
attempt to strip a leading '../pkg/src/' component.
The following example makes the behavior of Tru64 'make' more
apparent.
$ cat Makefile
VPATH = sub
all: ../foo
echo ../foo
$ ls
Makefile foo
$ make
echo foo
foo
Dependency '../foo' was found in 'sub/../foo', but Tru64 'make'
simplified it as 'foo'. (Note that the 'sub/' directory does not even
exist, this just means that the simplification occurred before the file
was checked for.)
For the record here is how SunOS 4 'make' behaves on this example.
$ make
make: Fatal error: Don't know how to make target `../foo'
$ mkdir sub
$ make
echo sub/../foo
sub/../foo
File: autoconf.info, Node: Tru64 Directory Magic, Next: Make Target Lookup, Prev: Automatic Rule Rewriting, Up: VPATH and Make
12.18.5 Tru64 'make' Creates Prerequisite Directories Magically
---------------------------------------------------------------
When a prerequisite is a subdirectory of 'VPATH', Tru64 'make' creates
it in the current directory.
$ mkdir -p foo/bar build
$ cd build
$ cat >Makefile <<END
VPATH = ..
all: foo/bar
END
$ make
mkdir foo
mkdir foo/bar
This can yield unexpected results if a rule uses a manual 'VPATH'
search as presented before.
VPATH = ..
all : foo/bar
command `test -d foo/bar || echo ../`foo/bar
The above 'command' is run on the empty 'foo/bar' directory that was
created in the current directory.
File: autoconf.info, Node: Make Target Lookup, Prev: Tru64 Directory Magic, Up: VPATH and Make
12.18.6 Make Target Lookup
--------------------------
GNU 'make' uses a complex algorithm to decide when it should use files
found via a 'VPATH' search. *Note How Directory Searches are Performed:
(make)Search Algorithm.
If a target needs to be rebuilt, GNU 'make' discards the file name
found during the 'VPATH' search for this target, and builds the file
locally using the file name given in the makefile. If a target does not
need to be rebuilt, GNU 'make' uses the file name found during the
'VPATH' search.
Other 'make' implementations, like NetBSD 'make', are easier to
describe: the file name found during the 'VPATH' search is used whether
the target needs to be rebuilt or not. Therefore new files are created
locally, but existing files are updated at their 'VPATH' location.
OpenBSD and FreeBSD 'make', however, never perform a 'VPATH' search
for a dependency that has an explicit rule. This is extremely annoying.
When attempting a 'VPATH' build for an autoconfiscated package (e.g.,
'mkdir build && cd build && ../configure'), this means GNU 'make' builds
everything locally in the 'build' directory, while BSD 'make' builds new
files locally and updates existing files in the source directory.
$ cat Makefile
VPATH = ..
all: foo.x bar.x
foo.x bar.x: newer.x
@echo Building $@
$ touch ../bar.x
$ touch ../newer.x
$ make # GNU make
Building foo.x
Building bar.x
$ pmake # NetBSD make
Building foo.x
Building ../bar.x
$ fmake # FreeBSD make, OpenBSD make
Building foo.x
Building bar.x
$ tmake # Tru64 make
Building foo.x
Building bar.x
$ touch ../bar.x
$ make # GNU make
Building foo.x
$ pmake # NetBSD make
Building foo.x
$ fmake # FreeBSD make, OpenBSD make
Building foo.x
Building bar.x
$ tmake # Tru64 make
Building foo.x
Building bar.x
Note how NetBSD 'make' updates '../bar.x' in its VPATH location, and
how FreeBSD, OpenBSD, and Tru64 'make' always update 'bar.x', even when
'../bar.x' is up to date.
Another point worth mentioning is that once GNU 'make' has decided to
ignore a 'VPATH' file name (e.g., it ignored '../bar.x' in the above
example) it continues to ignore it when the target occurs as a
prerequisite of another rule.
The following example shows that GNU 'make' does not look up 'bar.x'
in 'VPATH' before performing the '.x.y' rule, because it ignored the
'VPATH' result of 'bar.x' while running the 'bar.x: newer.x' rule.
$ cat Makefile
VPATH = ..
all: bar.y
bar.x: newer.x
@echo Building $@
.SUFFIXES: .x .y
.x.y:
cp $< $@
$ touch ../bar.x
$ touch ../newer.x
$ make # GNU make
Building bar.x
cp bar.x bar.y
cp: cannot stat `bar.x': No such file or directory
make: *** [bar.y] Error 1
$ pmake # NetBSD make
Building ../bar.x
cp ../bar.x bar.y
$ rm bar.y
$ fmake # FreeBSD make, OpenBSD make
echo Building bar.x
cp bar.x bar.y
cp: cannot stat `bar.x': No such file or directory
*** Error code 1
$ tmake # Tru64 make
Building bar.x
cp: bar.x: No such file or directory
*** Exit 1
Note that if you drop away the command from the 'bar.x: newer.x'
rule, GNU 'make' magically starts to work: it knows that 'bar.x' hasn't
been updated, therefore it doesn't discard the result from 'VPATH'
('../bar.x') in succeeding uses. Tru64 also works, but FreeBSD and
OpenBSD still don't.
$ cat Makefile
VPATH = ..
all: bar.y
bar.x: newer.x
.SUFFIXES: .x .y
.x.y:
cp $< $@
$ touch ../bar.x
$ touch ../newer.x
$ make # GNU make
cp ../bar.x bar.y
$ rm bar.y
$ pmake # NetBSD make
cp ../bar.x bar.y
$ rm bar.y
$ fmake # FreeBSD make, OpenBSD make
cp bar.x bar.y
cp: cannot stat `bar.x': No such file or directory
*** Error code 1
$ tmake # Tru64 make
cp ../bar.x bar.y
It seems the sole solution that would please every 'make'
implementation is to never rely on 'VPATH' searches for targets. In
other words, 'VPATH' should be reserved to unbuilt sources.
File: autoconf.info, Node: Single Suffix Rules, Next: Timestamps and Make, Prev: VPATH and Make, Up: Portable Make
12.19 Single Suffix Rules and Separated Dependencies
====================================================
A "Single Suffix Rule" is basically a usual suffix (inference) rule
('.from.to:'), but which _destination_ suffix is empty ('.from:').
"Separated dependencies" simply refers to listing the prerequisite of
a target, without defining a rule. Usually one can list on the one hand
side, the rules, and on the other hand side, the dependencies.
Solaris 'make' does not support separated dependencies for targets
defined by single suffix rules:
$ cat Makefile
.SUFFIXES: .in
foo: foo.in
.in:
cp $< $@
$ touch foo.in
$ make
$ ls
Makefile foo.in
while GNU Make does:
$ gmake
cp foo.in foo
$ ls
Makefile foo foo.in
Note it works without the 'foo: foo.in' dependency.
$ cat Makefile
.SUFFIXES: .in
.in:
cp $< $@
$ make foo
cp foo.in foo
and it works with double suffix inference rules:
$ cat Makefile
foo.out: foo.in
.SUFFIXES: .in .out
.in.out:
cp $< $@
$ make
cp foo.in foo.out
As a result, in such a case, you have to write target rules.
File: autoconf.info, Node: Timestamps and Make, Prev: Single Suffix Rules, Up: Portable Make
12.20 Timestamp Resolution and Make
===================================
Traditionally, file timestamps had 1-second resolution, and 'make' used
those timestamps to determine whether one file was newer than the other.
However, many modern file systems have timestamps with 1-nanosecond
resolution. Some 'make' implementations look at the entire timestamp;
others ignore the fractional part, which can lead to incorrect results.
Normally this is not a problem, but in some extreme cases you may need
to use tricks like 'sleep 1' to work around timestamp truncation bugs.
Commands like 'cp -p' and 'touch -r' typically do not copy file
timestamps to their full resolutions (*note Limitations of Usual Tools:
touch.). Hence you should be wary of rules like this:
dest: src
cp -p src dest
as 'dest' often appears to be older than 'src' after the timestamp is
truncated, and this can cause 'make' to do needless rework the next time
it is invoked. To work around this problem, you can use a timestamp
file, e.g.:
dest-stamp: src
cp -p src dest
date >dest-stamp
Apart from timestamp resolution, there are also differences in
handling equal timestamps. HP-UX 'make' updates targets if it has the
same time stamp as one of its prerequisites, in violation of Posix
rules.
This can cause spurious rebuilds for repeated runs of 'make'. This
in turn can cause 'make' to fail if it tries to rebuild generated files
in a possibly read-only source tree with tools not present on the
end-user machine. Use GNU 'make' instead.
File: autoconf.info, Node: Portable C and C++, Next: Manual Configuration, Prev: Portable Make, Up: Top
13 Portable C and C++ Programming
*********************************
C and C++ programs often use low-level features of the underlying
system, and therefore are often more difficult to make portable to other
platforms.
Several standards have been developed to help make your programs more
portable. If you write programs with these standards in mind, you can
have greater confidence that your programs work on a wide variety of
systems. *Note Language Standards Supported by GCC: (gcc)Standards, for
a list of C-related standards. Many programs also assume the Posix
standard (http://www.opengroup.org/susv3).
Some old code is written to be portable to K&R C, which predates any
C standard. K&R C compilers are no longer of practical interest,
though, and the rest of section assumes at least C89, the first C
standard.
Program portability is a huge topic, and this section can only
briefly introduce common pitfalls. *Note Portability between System
Types: (standards)System Portability, for more information.
* Menu:
* Varieties of Unportability:: How to make your programs unportable
* Integer Overflow:: When integers get too large
* Preprocessor Arithmetic:: '#if' expression problems
* Null Pointers:: Properties of null pointers
* Buffer Overruns:: Subscript errors and the like
* Volatile Objects:: 'volatile' and signals
* Floating Point Portability:: Portable floating-point arithmetic
* Exiting Portably:: Exiting and the exit status
File: autoconf.info, Node: Varieties of Unportability, Next: Integer Overflow, Up: Portable C and C++
13.1 Varieties of Unportability
===============================
Autoconf tests and ordinary programs often need to test what is allowed
on a system, and therefore they may need to deliberately exceed the
boundaries of what the standards allow, if only to see whether an
optional feature is present. When you write such a program, you should
keep in mind the difference between constraints, unspecified behavior,
and undefined behavior.
In C, a "constraint" is a rule that the compiler must enforce. An
example constraint is that C programs must not declare a bit-field with
negative width. Tests can therefore reliably assume that programs with
negative-width bit-fields are rejected by a compiler that conforms to
the standard.
"Unspecified behavior" is valid behavior, where the standard allows
multiple possibilities. For example, the order of evaluation of
function arguments is unspecified. Some unspecified behavior is
"implementation-defined", i.e., documented by the implementation, but
since Autoconf tests cannot read the documentation they cannot
distinguish between implementation-defined and other unspecified
behavior. It is common for Autoconf tests to probe implementations to
determine otherwise-unspecified behavior.
"Undefined behavior" is invalid behavior, where the standard allows
the implementation to do anything it pleases. For example,
dereferencing a null pointer leads to undefined behavior. If possible,
test programs should avoid undefined behavior, since a program with
undefined behavior might succeed on a test that should fail.
The above rules apply to programs that are intended to conform to the
standard. However, strictly-conforming programs are quite rare, since
the standards are so limiting. A major goal of Autoconf is to support
programs that use implementation features not described by the standard,
and it is fairly common for test programs to violate the above rules, if
the programs work well enough in practice.
File: autoconf.info, Node: Integer Overflow, Next: Preprocessor Arithmetic, Prev: Varieties of Unportability, Up: Portable C and C++
13.2 Integer Overflow
=====================
In practice many portable C programs assume that signed integer overflow
wraps around reliably using two's complement arithmetic. Yet the C
standard says that program behavior is undefined on overflow, and in a
few cases C programs do not work on some modern implementations because
their overflows do not wrap around as their authors expected.
Conversely, in signed integer remainder, the C standard requires
overflow behavior that is commonly not implemented.
* Menu:
* Integer Overflow Basics:: Why integer overflow is a problem
* Signed Overflow Examples:: Examples of code assuming wraparound
* Optimization and Wraparound:: Optimizations that break uses of wraparound
* Signed Overflow Advice:: Practical advice for signed overflow issues
* Signed Integer Division:: 'INT_MIN / -1' and 'INT_MIN % -1'
File: autoconf.info, Node: Integer Overflow Basics, Next: Signed Overflow Examples, Up: Integer Overflow
13.2.1 Basics of Integer Overflow
---------------------------------
In languages like C, unsigned integer overflow reliably wraps around;
e.g., 'UINT_MAX + 1' yields zero. This is guaranteed by the C standard
and is portable in practice, unless you specify aggressive, nonstandard
optimization options suitable only for special applications.
In contrast, the C standard says that signed integer overflow leads
to undefined behavior where a program can do anything, including dumping
core or overrunning a buffer. The misbehavior can even precede the
overflow. Such an overflow can occur during addition, subtraction,
multiplication, division, and left shift.
Despite this requirement of the standard, many C programs and
Autoconf tests assume that signed integer overflow silently wraps around
modulo a power of two, using two's complement arithmetic, so long as you
cast the resulting value to a signed integer type or store it into a
signed integer variable. If you use conservative optimization flags,
such programs are generally portable to the vast majority of modern
platforms, with a few exceptions discussed later.
For historical reasons the C standard also allows implementations
with ones' complement or signed magnitude arithmetic, but it is safe to
assume two's complement nowadays.
Also, overflow can occur when converting an out-of-range value to a
signed integer type. Here a standard implementation must define what
happens, but this might include raising an exception. In practice all
known implementations support silent wraparound in this case, so you
need not worry about other possibilities.
File: autoconf.info, Node: Signed Overflow Examples, Next: Optimization and Wraparound, Prev: Integer Overflow Basics, Up: Integer Overflow
13.2.2 Examples of Code Assuming Wraparound Overflow
----------------------------------------------------
There has long been a tension between what the C standard requires for
signed integer overflow, and what C programs commonly assume. The
standard allows aggressive optimizations based on assumptions that
overflow never occurs, but many practical C programs rely on overflow
wrapping around. These programs do not conform to the standard, but
they commonly work in practice because compiler writers are
understandably reluctant to implement optimizations that would break
many programs, unless perhaps a user specifies aggressive optimization.
The C Standard says that if a program has signed integer overflow its
behavior is undefined, and the undefined behavior can even precede the
overflow. To take an extreme example:
if (password == expected_password)
allow_superuser_privileges ();
else if (counter++ == INT_MAX)
abort ();
else
printf ("%d password mismatches\n", counter);
If the 'int' variable 'counter' equals 'INT_MAX', 'counter++' must
overflow and the behavior is undefined, so the C standard allows the
compiler to optimize away the test against 'INT_MAX' and the 'abort'
call. Worse, if an earlier bug in the program lets the compiler deduce
that 'counter == INT_MAX' or that 'counter' previously overflowed, the C
standard allows the compiler to optimize away the password test and
generate code that allows superuser privileges unconditionally.
Despite this requirement by the standard, it has long been common for
C code to assume wraparound arithmetic after signed overflow, and all
known practical C implementations support some C idioms that assume
wraparound signed arithmetic, even if the idioms do not conform strictly
to the standard. If your code looks like the following examples it will
almost surely work with real-world compilers.
Here is an example derived from the 7th Edition Unix implementation
of 'atoi' (1979-01-10):
char *p;
int f, n;
...
while (*p >= '0' && *p <= '9')
n = n * 10 + *p++ - '0';
return (f ? -n : n);
Even if the input string is in range, on most modern machines this has
signed overflow when computing the most negative integer (the '-n'
overflows) or a value near an extreme integer (the first '+' overflows).
Here is another example, derived from the 7th Edition implementation
of 'rand' (1979-01-10). Here the programmer expects both multiplication
and addition to wrap on overflow:
static long int randx = 1;
...
randx = randx * 1103515245 + 12345;
return (randx >> 16) & 077777;
In the following example, derived from the GNU C Library 2.5
implementation of 'mktime' (2006-09-09), the code assumes wraparound
arithmetic in '+' to detect signed overflow:
time_t t, t1, t2;
int sec_requested, sec_adjustment;
...
t1 = t + sec_requested;
t2 = t1 + sec_adjustment;
if (((t1 < t) != (sec_requested < 0))
| ((t2 < t1) != (sec_adjustment < 0)))
return -1;
If your code looks like these examples, it is probably safe even
though it does not strictly conform to the C standard. This might lead
one to believe that one can generally assume wraparound on overflow, but
that is not always true, as can be seen in the next section.
File: autoconf.info, Node: Optimization and Wraparound, Next: Signed Overflow Advice, Prev: Signed Overflow Examples, Up: Integer Overflow
13.2.3 Optimizations That Break Wraparound Arithmetic
-----------------------------------------------------
Compilers sometimes generate code that is incompatible with wraparound
integer arithmetic. A simple example is an algebraic simplification: a
compiler might translate '(i * 2000) / 1000' to 'i * 2' because it
assumes that 'i * 2000' does not overflow. The translation is not
equivalent to the original when overflow occurs: e.g., in the typical
case of 32-bit signed two's complement wraparound 'int', if 'i' has type
'int' and value '1073742', the original expression returns -2147483 but
the optimized version returns the mathematically correct value 2147484.
More subtly, loop induction optimizations often exploit the undefined
behavior of signed overflow. Consider the following contrived function
'sumc':
int
sumc (int lo, int hi)
{
int sum = 0;
int i;
for (i = lo; i <= hi; i++)
sum ^= i * 53;
return sum;
}
To avoid multiplying by 53 each time through the loop, an optimizing
compiler might internally transform 'sumc' to the equivalent of the
following:
int
transformed_sumc (int lo, int hi)
{
int sum = 0;
int hic = hi * 53;
int ic;
for (ic = lo * 53; ic <= hic; ic += 53)
sum ^= ic;
return sum;
}
This transformation is allowed by the C standard, but it is invalid for
wraparound arithmetic when 'INT_MAX / 53 < hi', because then the
overflow in computing expressions like 'hi * 53' can cause the
expression 'i <= hi' to yield a different value from the transformed
expression 'ic <= hic'.
For this reason, compilers that use loop induction and similar
techniques often do not support reliable wraparound arithmetic when a
loop induction variable like 'ic' is involved. Since loop induction
variables are generated by the compiler, and are not visible in the
source code, it is not always trivial to say whether the problem affects
your code.
Hardly any code actually depends on wraparound arithmetic in cases
like these, so in practice these loop induction optimizations are almost
always useful. However, edge cases in this area can cause problems.
For example:
int j;
for (j = 1; 0 < j; j *= 2)
test (j);
Here, the loop attempts to iterate through all powers of 2 that 'int'
can represent, but the C standard allows a compiler to optimize away the
comparison and generate an infinite loop, under the argument that
behavior is undefined on overflow. As of this writing this optimization
is not done by any production version of GCC with '-O2', but it might be
performed by other compilers, or by more aggressive GCC optimization
options, and the GCC developers have not decided whether it will
continue to work with GCC and '-O2'.
File: autoconf.info, Node: Signed Overflow Advice, Next: Signed Integer Division, Prev: Optimization and Wraparound, Up: Integer Overflow
13.2.4 Practical Advice for Signed Overflow Issues
--------------------------------------------------
Ideally the safest approach is to avoid signed integer overflow
entirely. For example, instead of multiplying two signed integers, you
can convert them to unsigned integers, multiply the unsigned values,
then test whether the result is in signed range.
Rewriting code in this way will be inconvenient, though, particularly
if the signed values might be negative. Also, it may hurt performance.
Using unsigned arithmetic to check for overflow is particularly painful
to do portably and efficiently when dealing with an integer type like
'uid_t' whose width and signedness vary from platform to platform.
Furthermore, many C applications pervasively assume wraparound
behavior and typically it is not easy to find and remove all these
assumptions. Hence it is often useful to maintain nonstandard code that
assumes wraparound on overflow, instead of rewriting the code. The rest
of this section attempts to give practical advice for this situation.
If your code wants to detect signed integer overflow in 'sum = a +
b', it is generally safe to use an expression like '(sum < a) != (b <
0)'.
If your code uses a signed loop index, make sure that the index
cannot overflow, along with all signed expressions derived from the
index. Here is a contrived example of problematic code with two
instances of overflow.
for (i = INT_MAX - 10; i <= INT_MAX; i++)
if (i + 1 < 0)
{
report_overflow ();
break;
}
Because of the two overflows, a compiler might optimize away or
transform the two comparisons in a way that is incompatible with the
wraparound assumption.
If your code uses an expression like '(i * 2000) / 1000' and you
actually want the multiplication to wrap around on overflow, use
unsigned arithmetic to do it, e.g., '((int) (i * 2000u)) / 1000'.
If your code assumes wraparound behavior and you want to insulate it
against any GCC optimizations that would fail to support that behavior,
you should use GCC's '-fwrapv' option, which causes signed overflow to
wrap around reliably (except for division and remainder, as discussed in
the next section).
If you need to port to platforms where signed integer overflow does
not reliably wrap around (e.g., due to hardware overflow checking, or to
highly aggressive optimizations), you should consider debugging with
GCC's '-ftrapv' option, which causes signed overflow to raise an
exception.
File: autoconf.info, Node: Signed Integer Division, Prev: Signed Overflow Advice, Up: Integer Overflow
13.2.5 Signed Integer Division and Integer Overflow
---------------------------------------------------
Overflow in signed integer division is not always harmless: for example,
on CPUs of the i386 family, dividing 'INT_MIN' by '-1' yields a SIGFPE
signal which by default terminates the program. Worse, taking the
remainder of these two values typically yields the same signal on these
CPUs, even though the C standard requires 'INT_MIN % -1' to yield zero
because the expression does not overflow.
File: autoconf.info, Node: Preprocessor Arithmetic, Next: Null Pointers, Prev: Integer Overflow, Up: Portable C and C++
13.3 Preprocessor Arithmetic
============================
In C99, preprocessor arithmetic, used for '#if' expressions, must be
evaluated as if all signed values are of type 'intmax_t' and all
unsigned values of type 'uintmax_t'. Many compilers are buggy in this
area, though. For example, as of 2007, Sun C mishandles '#if LLONG_MIN
< 0' on a platform with 32-bit 'long int' and 64-bit 'long long int'.
Also, some older preprocessors mishandle constants ending in 'LL'. To
work around these problems, you can compute the value of expressions
like 'LONG_MAX < LLONG_MAX' at 'configure'-time rather than at
'#if'-time.
File: autoconf.info, Node: Null Pointers, Next: Buffer Overruns, Prev: Preprocessor Arithmetic, Up: Portable C and C++
13.4 Properties of Null Pointers
================================
Most modern hosts reliably fail when you attempt to dereference a null
pointer.
On almost all modern hosts, null pointers use an all-bits-zero
internal representation, so you can reliably use 'memset' with 0 to set
all the pointers in an array to null values.
If 'p' is a null pointer to an object type, the C expression 'p + 0'
always evaluates to 'p' on modern hosts, even though the standard says
that it has undefined behavior.
File: autoconf.info, Node: Buffer Overruns, Next: Volatile Objects, Prev: Null Pointers, Up: Portable C and C++
13.5 Buffer Overruns and Subscript Errors
=========================================
Buffer overruns and subscript errors are the most common dangerous
errors in C programs. They result in undefined behavior because storing
outside an array typically modifies storage that is used by some other
object, and most modern systems lack runtime checks to catch these
errors. Programs should not rely on buffer overruns being caught.
There is one exception to the usual rule that a portable program
cannot address outside an array. In C, it is valid to compute the
address just past an object, e.g., '&a[N]' where 'a' has 'N' elements,
so long as you do not dereference the resulting pointer. But it is not
valid to compute the address just before an object, e.g., '&a[-1]'; nor
is it valid to compute two past the end, e.g., '&a[N+1]'. On most
platforms '&a[-1] < &a[0] && &a[N] < &a[N+1]', but this is not reliable
in general, and it is usually easy enough to avoid the potential
portability problem, e.g., by allocating an extra unused array element
at the start or end.
Valgrind (http://valgrind.org/) can catch many overruns. GCC users
might also consider using the '-fmudflap' option to catch overruns.
Buffer overruns are usually caused by off-by-one errors, but there
are more subtle ways to get them.
Using 'int' values to index into an array or compute array sizes
causes problems on typical 64-bit hosts where an array index might be
2^{31} or larger. Index values of type 'size_t' avoid this problem, but
cannot be negative. Index values of type 'ptrdiff_t' are signed, and
are wide enough in practice.
If you add or multiply two numbers to calculate an array size, e.g.,
'malloc (x * sizeof y + z)', havoc ensues if the addition or
multiplication overflows.
Many implementations of the 'alloca' function silently misbehave and
can generate buffer overflows if given sizes that are too large. The
size limits are implementation dependent, but are at least 4000 bytes on
all platforms that we know about.
The standard functions 'asctime', 'asctime_r', 'ctime', 'ctime_r',
and 'gets' are prone to buffer overflows, and portable code should not
use them unless the inputs are known to be within certain limits. The
time-related functions can overflow their buffers if given timestamps
out of range (e.g., a year less than -999 or greater than 9999).
Time-related buffer overflows cannot happen with recent-enough versions
of the GNU C library, but are possible with other implementations. The
'gets' function is the worst, since it almost invariably overflows its
buffer when presented with an input line larger than the buffer.
File: autoconf.info, Node: Volatile Objects, Next: Floating Point Portability, Prev: Buffer Overruns, Up: Portable C and C++
13.6 Volatile Objects
=====================
The keyword 'volatile' is often misunderstood in portable code. Its use
inhibits some memory-access optimizations, but programmers often wish
that it had a different meaning than it actually does.
'volatile' was designed for code that accesses special objects like
memory-mapped device registers whose contents spontaneously change.
Such code is inherently low-level, and it is difficult to specify
portably what 'volatile' means in these cases. The C standard says,
"What constitutes an access to an object that has volatile-qualified
type is implementation-defined," so in theory each implementation is
supposed to fill in the gap by documenting what 'volatile' means for
that implementation. In practice, though, this documentation is usually
absent or incomplete.
One area of confusion is the distinction between objects defined with
volatile types, and volatile lvalues. From the C standard's point of
view, an object defined with a volatile type has externally visible
behavior. You can think of such objects as having little oscilloscope
probes attached to them, so that the user can observe some properties of
accesses to them, just as the user can observe data written to output
files. However, the standard does not make it clear whether users can
observe accesses by volatile lvalues to ordinary objects. For example:
/* Declare and access a volatile object.
Accesses to X are "visible" to users. */
static int volatile x;
x = 1;
/* Access two ordinary objects via a volatile lvalue.
It's not clear whether accesses to *P are "visible". */
int y;
int *z = malloc (sizeof (int));
int volatile *p;
p = &y;
*p = 1;
p = z;
*p = 1;
Programmers often wish that 'volatile' meant "Perform the memory
access here and now, without merging several memory accesses, without
changing the memory word size, and without reordering." But the C
standard does not require this. For objects defined with a volatile
type, accesses must be done before the next sequence point; but
otherwise merging, reordering, and word-size change is allowed. Worse,
it is not clear from the standard whether volatile lvalues provide more
guarantees in general than nonvolatile lvalues, if the underlying
objects are ordinary.
Even when accessing objects defined with a volatile type, the C
standard allows only extremely limited signal handlers: the behavior is
undefined if a signal handler reads any nonlocal object, or writes to
any nonlocal object whose type is not 'sig_atomic_t volatile', or calls
any standard library function other than 'abort', 'signal', and (if C99)
'_Exit'. Hence C compilers need not worry about a signal handler
disturbing ordinary computation, unless the computation accesses a
'sig_atomic_t volatile' lvalue that is not a local variable. (There is
an obscure exception for accesses via a pointer to a volatile character,
since it may point into part of a 'sig_atomic_t volatile' object.)
Posix adds to the list of library functions callable from a portable
signal handler, but otherwise is like the C standard in this area.
Some C implementations allow memory-access optimizations within each
translation unit, such that actual behavior agrees with the behavior
required by the standard only when calling a function in some other
translation unit, and a signal handler acts like it was called from a
different translation unit. The C standard hints that in these
implementations, objects referred to by signal handlers "would require
explicit specification of 'volatile' storage, as well as other
implementation-defined restrictions." But unfortunately even for this
special case these other restrictions are often not documented well.
*Note When is a Volatile Object Accessed?: (gcc)Volatiles, for some
restrictions imposed by GCC. *Note Defining Signal Handlers:
(libc)Defining Handlers, for some restrictions imposed by the GNU C
library. Restrictions differ on other platforms.
If possible, it is best to use a signal handler that fits within the
limits imposed by the C and Posix standards.
If this is not practical, you can try the following rules of thumb.
A signal handler should access only volatile lvalues, preferably lvalues
that refer to objects defined with a volatile type, and should not
assume that the accessed objects have an internally consistent state if
they are larger than a machine word. Furthermore, installers should
employ compilers and compiler options that are commonly used for
building operating system kernels, because kernels often need more from
'volatile' than the C Standard requires, and installers who compile an
application in a similar environment can sometimes benefit from the
extra constraints imposed by kernels on compilers. Admittedly we are
handwaving somewhat here, as there are few guarantees in this area; the
rules of thumb may help to fix some bugs but there is a good chance that
they will not fix them all.
For 'volatile', C++ has the same problems that C does. Multithreaded
applications have even more problems with 'volatile', but they are
beyond the scope of this section.
The bottom line is that using 'volatile' typically hurts performance
but should not hurt correctness. In some cases its use does help
correctness, but these cases are often so poorly understood that all too
often adding 'volatile' to a data structure merely alleviates some
symptoms of a bug while not fixing the bug in general.
File: autoconf.info, Node: Floating Point Portability, Next: Exiting Portably, Prev: Volatile Objects, Up: Portable C and C++
13.7 Floating Point Portability
===============================
Almost all modern systems use IEEE-754 floating point, and it is safe to
assume IEEE-754 in most portable code these days. For more information,
please see David Goldberg's classic paper What Every Computer Scientist
Should Know About Floating-Point Arithmetic
(http://www.validlab.com/goldberg/paper.pdf).
File: autoconf.info, Node: Exiting Portably, Prev: Floating Point Portability, Up: Portable C and C++
13.8 Exiting Portably
=====================
A C or C++ program can exit with status N by returning N from the 'main'
function. Portable programs are supposed to exit either with status 0
or 'EXIT_SUCCESS' to succeed, or with status 'EXIT_FAILURE' to fail, but
in practice it is portable to fail by exiting with status 1, and test
programs that assume Posix can fail by exiting with status values from 1
through 255. Programs on SunOS 2.0 (1985) through 3.5.2 (1988)
incorrectly exited with zero status when 'main' returned nonzero, but
ancient systems like these are no longer of practical concern.
A program can also exit with status N by passing N to the 'exit'
function, and a program can fail by calling the 'abort' function. If a
program is specialized to just some platforms, it can fail by calling
functions specific to those platforms, e.g., '_exit' (Posix) and '_Exit'
(C99). However, like other functions, an exit function should be
declared, typically by including a header. For example, if a C program
calls 'exit', it should include 'stdlib.h' either directly or via the
default includes (*note Default Includes::).
A program can fail due to undefined behavior such as dereferencing a
null pointer, but this is not recommended as undefined behavior allows
an implementation to do whatever it pleases and this includes exiting
successfully.
File: autoconf.info, Node: Manual Configuration, Next: Site Configuration, Prev: Portable C and C++, Up: Top
14 Manual Configuration
***********************
A few kinds of features can't be guessed automatically by running test
programs. For example, the details of the object-file format, or
special options that need to be passed to the compiler or linker. You
can check for such features using ad-hoc means, such as having
'configure' check the output of the 'uname' program, or looking for
libraries that are unique to particular systems. However, Autoconf
provides a uniform method for handling unguessable features.
* Menu:
* Specifying Target Triplets:: Specifying target triplets
* Canonicalizing:: Getting the canonical system type
* Using System Type:: What to do with the system type
File: autoconf.info, Node: Specifying Target Triplets, Next: Canonicalizing, Up: Manual Configuration
14.1 Specifying target triplets
===============================
Autoconf-generated 'configure' scripts can make decisions based on a
canonical name for the system type, or "target triplet", which has the
form: 'CPU-VENDOR-OS', where OS can be 'SYSTEM' or 'KERNEL-SYSTEM'
'configure' can usually guess the canonical name for the type of
system it's running on. To do so it runs a script called
'config.guess', which infers the name using the 'uname' command or
symbols predefined by the C preprocessor.
Alternately, the user can specify the system type with command line
arguments to 'configure' (*note System Type::. Doing so is necessary
when cross-compiling. In the most complex case of cross-compiling,
three system types are involved. The options to specify them are:
'--build=BUILD-TYPE'
the type of system on which the package is being configured and
compiled. It defaults to the result of running 'config.guess'.
Specifying a BUILD-TYPE that differs from HOST-TYPE enables
cross-compilation mode.
'--host=HOST-TYPE'
the type of system on which the package runs. By default it is the
same as the build machine. Specifying a HOST-TYPE that differs
from BUILD-TYPE, when BUILD-TYPE was also explicitly specified,
enables cross-compilation mode.
'--target=TARGET-TYPE'
the type of system for which any compiler tools in the package
produce code (rarely needed). By default, it is the same as host.
If you mean to override the result of 'config.guess', use '--build',
not '--host', since the latter enables cross-compilation. For
historical reasons, whenever you specify '--host', be sure to specify
'--build' too; this will be fixed in the future. So, to enter
cross-compilation mode, use a command like this
./configure --build=i686-pc-linux-gnu --host=m68k-coff
Note that if you do not specify '--host', 'configure' fails if it can't
run the code generated by the specified compiler. For example,
configuring as follows fails:
./configure CC=m68k-coff-gcc
When cross-compiling, 'configure' will warn about any tools
(compilers, linkers, assemblers) whose name is not prefixed with the
host type. This is an aid to users performing cross-compilation.
Continuing the example above, if a cross-compiler named 'cc' is used
with a native 'pkg-config', then libraries found by 'pkg-config' will
likely cause subtle build failures; but using the names 'm68k-coff-cc'
and 'm68k-coff-pkg-config' avoids any confusion. Avoiding the warning
is as simple as creating the correct symlinks naming the cross tools.
'configure' recognizes short aliases for many system types; for
example, 'decstation' can be used instead of 'mips-dec-ultrix4.2'.
'configure' runs a script called 'config.sub' to canonicalize system
type aliases.
This section deliberately omits the description of the obsolete
interface; see *note Hosts and Cross-Compilation::.
File: autoconf.info, Node: Canonicalizing, Next: Using System Type, Prev: Specifying Target Triplets, Up: Manual Configuration
14.2 Getting the Canonical System Type
======================================
The following macros make the system type available to 'configure'
scripts.
The variables 'build_alias', 'host_alias', and 'target_alias' are
always exactly the arguments of '--build', '--host', and '--target'; in
particular, they are left empty if the user did not use them, even if
the corresponding 'AC_CANONICAL' macro was run. Any configure script
may use these variables anywhere. These are the variables that should
be used when in interaction with the user.
If you need to recognize some special environments based on their
system type, run the following macros to get canonical system names.
These variables are not set before the macro call.
If you use these macros, you must distribute 'config.guess' and
'config.sub' along with your source code. *Note Output::, for
information about the 'AC_CONFIG_AUX_DIR' macro which you can use to
control in which directory 'configure' looks for those scripts.
-- Macro: AC_CANONICAL_BUILD
Compute the canonical build-system type variable, 'build', and its
three individual parts 'build_cpu', 'build_vendor', and 'build_os'.
If '--build' was specified, then 'build' is the canonicalization of
'build_alias' by 'config.sub', otherwise it is determined by the
shell script 'config.guess'.
-- Macro: AC_CANONICAL_HOST
Compute the canonical host-system type variable, 'host', and its
three individual parts 'host_cpu', 'host_vendor', and 'host_os'.
If '--host' was specified, then 'host' is the canonicalization of
'host_alias' by 'config.sub', otherwise it defaults to 'build'.
-- Macro: AC_CANONICAL_TARGET
Compute the canonical target-system type variable, 'target', and
its three individual parts 'target_cpu', 'target_vendor', and
'target_os'.
If '--target' was specified, then 'target' is the canonicalization
of 'target_alias' by 'config.sub', otherwise it defaults to 'host'.
Note that there can be artifacts due to the backward compatibility
code. *Note Hosts and Cross-Compilation::, for more.
File: autoconf.info, Node: Using System Type, Prev: Canonicalizing, Up: Manual Configuration
14.3 Using the System Type
==========================
In 'configure.ac' the system type is generally used by one or more
'case' statements to select system-specifics. Shell wildcards can be
used to match a group of system types.
For example, an extra assembler code object file could be chosen,
giving access to a CPU cycle counter register. '$(CYCLE_OBJ)' in the
following would be used in a makefile to add the object to a program or
library.
AS_CASE([$host],
[alpha*-*-*], [CYCLE_OBJ=rpcc.o],
[i?86-*-*], [CYCLE_OBJ=rdtsc.o],
[CYCLE_OBJ=""]
)
AC_SUBST([CYCLE_OBJ])
'AC_CONFIG_LINKS' (*note Configuration Links::) is another good way
to select variant source files, for example optimized code for some
CPUs. The configured CPU type doesn't always indicate exact CPU types,
so some runtime capability checks may be necessary too.
case $host in
alpha*-*-*) AC_CONFIG_LINKS([dither.c:alpha/dither.c]) ;;
powerpc*-*-*) AC_CONFIG_LINKS([dither.c:powerpc/dither.c]) ;;
*-*-*) AC_CONFIG_LINKS([dither.c:generic/dither.c]) ;;
esac
The host system type can also be used to find cross-compilation tools
with 'AC_CHECK_TOOL' (*note Generic Programs::).
The above examples all show '$host', since this is where the code is
going to run. Only rarely is it necessary to test '$build' (which is
where the build is being done).
Whenever you're tempted to use '$host' it's worth considering whether
some sort of probe would be better. New system types come along
periodically or previously missing features are added. Well-written
probes can adapt themselves to such things, but hard-coded lists of
names can't. Here are some guidelines,
* Availability of libraries and library functions should always be
checked by probing.
* Variant behavior of system calls is best identified with runtime
tests if possible, but bug workarounds or obscure difficulties
might have to be driven from '$host'.
* Assembler code is inevitably highly CPU-specific and is best
selected according to '$host_cpu'.
* Assembler variations like underscore prefix on globals or ELF
versus COFF type directives are however best determined by probing,
perhaps even examining the compiler output.
'$target' is for use by a package creating a compiler or similar.
For ordinary packages it's meaningless and should not be used. It
indicates what the created compiler should generate code for, if it can
cross-compile. '$target' generally selects various hard-coded CPU and
system conventions, since usually the compiler or tools under
construction themselves determine how the target works.
File: autoconf.info, Node: Site Configuration, Next: Running configure Scripts, Prev: Manual Configuration, Up: Top
15 Site Configuration
*********************
'configure' scripts support several kinds of local configuration
decisions. There are ways for users to specify where external software
packages are, include or exclude optional features, install programs
under modified names, and set default values for 'configure' options.
* Menu:
* Help Formatting:: Customizing 'configure --help'
* External Software:: Working with other optional software
* Package Options:: Selecting optional features
* Pretty Help Strings:: Formatting help string
* Option Checking:: Controlling checking of 'configure' options
* Site Details:: Configuring site details
* Transforming Names:: Changing program names when installing
* Site Defaults:: Giving 'configure' local defaults
File: autoconf.info, Node: Help Formatting, Next: External Software, Up: Site Configuration
15.1 Controlling Help Output
============================
Users consult 'configure --help' to learn of configuration decisions
specific to your package. By default, 'configure' breaks this output
into sections for each type of option; within each section, help strings
appear in the order 'configure.ac' defines them:
Optional Features:
...
--enable-bar include bar
Optional Packages:
...
--with-foo use foo
-- Macro: AC_PRESERVE_HELP_ORDER
Request an alternate '--help' format, in which options of all types
appear together, in the order defined. Call this macro before any
'AC_ARG_ENABLE' or 'AC_ARG_WITH'.
Optional Features and Packages:
...
--enable-bar include bar
--with-foo use foo
File: autoconf.info, Node: External Software, Next: Package Options, Prev: Help Formatting, Up: Site Configuration
15.2 Working With External Software
===================================
Some packages require, or can optionally use, other software packages
that are already installed. The user can give 'configure' command line
options to specify which such external software to use. The options
have one of these forms:
--with-PACKAGE[=ARG]
--without-PACKAGE
For example, '--with-gnu-ld' means work with the GNU linker instead
of some other linker. '--with-x' means work with The X Window System.
The user can give an argument by following the package name with '='
and the argument. Giving an argument of 'no' is for packages that are
used by default; it says to _not_ use the package. An argument that is
neither 'yes' nor 'no' could include a name or number of a version of
the other package, to specify more precisely which other package this
program is supposed to work with. If no argument is given, it defaults
to 'yes'. '--without-PACKAGE' is equivalent to '--with-PACKAGE=no'.
Normally 'configure' scripts complain about '--with-PACKAGE' options
that they do not support. *Note Option Checking::, for details, and for
how to override the defaults.
For each external software package that may be used, 'configure.ac'
should call 'AC_ARG_WITH' to detect whether the 'configure' user asked
to use it. Whether each package is used or not by default, and which
arguments are valid, is up to you.
-- Macro: AC_ARG_WITH (PACKAGE, HELP-STRING, [ACTION-IF-GIVEN],
[ACTION-IF-NOT-GIVEN])
If the user gave 'configure' the option '--with-PACKAGE' or
'--without-PACKAGE', run shell commands ACTION-IF-GIVEN. If
neither option was given, run shell commands ACTION-IF-NOT-GIVEN.
The name PACKAGE indicates another software package that this
program should work with. It should consist only of alphanumeric
characters, dashes, plus signs, and dots.
The option's argument is available to the shell commands
ACTION-IF-GIVEN in the shell variable 'withval', which is actually
just the value of the shell variable named 'with_PACKAGE', with any
non-alphanumeric characters in PACKAGE changed into '_'. You may
use that variable instead, if you wish.
The argument HELP-STRING is a description of the option that looks
like this:
--with-readline support fancy command line editing
HELP-STRING may be more than one line long, if more detail is
needed. Just make sure the columns line up in 'configure --help'.
Avoid tabs in the help string. The easiest way to provide the
proper leading whitespace is to format your HELP-STRING with the
macro 'AS_HELP_STRING' (*note Pretty Help Strings::).
The following example shows how to use the 'AC_ARG_WITH' macro in a
common situation. You want to let the user decide whether to
enable support for an external library (e.g., the readline
library); if the user specified neither '--with-readline' nor
'--without-readline', you want to enable support for readline only
if the library is available on the system.
AC_ARG_WITH([readline],
[AS_HELP_STRING([--with-readline],
[support fancy command line editing @<:@default=check@:>@])],
[],
[with_readline=check])
LIBREADLINE=
AS_IF([test "x$with_readline" != xno],
[AC_CHECK_LIB([readline], [main],
[AC_SUBST([LIBREADLINE], ["-lreadline -lncurses"])
AC_DEFINE([HAVE_LIBREADLINE], [1],
[Define if you have libreadline])
],
[if test "x$with_readline" != xcheck; then
AC_MSG_FAILURE(
[--with-readline was given, but test for readline failed])
fi
], -lncurses)])
The next example shows how to use 'AC_ARG_WITH' to give the user
the possibility to enable support for the readline library, in case
it is still experimental and not well tested, and is therefore
disabled by default.
AC_ARG_WITH([readline],
[AS_HELP_STRING([--with-readline],
[enable experimental support for readline])],
[],
[with_readline=no])
LIBREADLINE=
AS_IF([test "x$with_readline" != xno],
[AC_CHECK_LIB([readline], [main],
[AC_SUBST([LIBREADLINE], ["-lreadline -lncurses"])
AC_DEFINE([HAVE_LIBREADLINE], [1],
[Define if you have libreadline])
],
[AC_MSG_FAILURE(
[--with-readline was given, but test for readline failed])],
[-lncurses])])
The last example shows how to use 'AC_ARG_WITH' to give the user
the possibility to disable support for the readline library, given
that it is an important feature and that it should be enabled by
default.
AC_ARG_WITH([readline],
[AS_HELP_STRING([--without-readline],
[disable support for readline])],
[],
[with_readline=yes])
LIBREADLINE=
AS_IF([test "x$with_readline" != xno],
[AC_CHECK_LIB([readline], [main],
[AC_SUBST([LIBREADLINE], ["-lreadline -lncurses"])
AC_DEFINE([HAVE_LIBREADLINE], [1],
[Define if you have libreadline])
],
[AC_MSG_FAILURE(
[readline test failed (--without-readline to disable)])],
[-lncurses])])
These three examples can be easily adapted to the case where
'AC_ARG_ENABLE' should be preferred to 'AC_ARG_WITH' (see *note
Package Options::).
File: autoconf.info, Node: Package Options, Next: Pretty Help Strings, Prev: External Software, Up: Site Configuration
15.3 Choosing Package Options
=============================
If a software package has optional compile-time features, the user can
give 'configure' command line options to specify whether to compile
them. The options have one of these forms:
--enable-FEATURE[=ARG]
--disable-FEATURE
These options allow users to choose which optional features to build
and install. '--enable-FEATURE' options should never make a feature
behave differently or cause one feature to replace another. They should
only cause parts of the program to be built rather than left out.
The user can give an argument by following the feature name with '='
and the argument. Giving an argument of 'no' requests that the feature
_not_ be made available. A feature with an argument looks like
'--enable-debug=stabs'. If no argument is given, it defaults to 'yes'.
'--disable-FEATURE' is equivalent to '--enable-FEATURE=no'.
Normally 'configure' scripts complain about '--enable-PACKAGE'
options that they do not support. *Note Option Checking::, for details,
and for how to override the defaults.
For each optional feature, 'configure.ac' should call 'AC_ARG_ENABLE'
to detect whether the 'configure' user asked to include it. Whether
each feature is included or not by default, and which arguments are
valid, is up to you.
-- Macro: AC_ARG_ENABLE (FEATURE, HELP-STRING, [ACTION-IF-GIVEN],
[ACTION-IF-NOT-GIVEN])
If the user gave 'configure' the option '--enable-FEATURE' or
'--disable-FEATURE', run shell commands ACTION-IF-GIVEN. If
neither option was given, run shell commands ACTION-IF-NOT-GIVEN.
The name FEATURE indicates an optional user-level facility. It
should consist only of alphanumeric characters, dashes, plus signs,
and dots.
The option's argument is available to the shell commands
ACTION-IF-GIVEN in the shell variable 'enableval', which is
actually just the value of the shell variable named
'enable_FEATURE', with any non-alphanumeric characters in FEATURE
changed into '_'. You may use that variable instead, if you wish.
The HELP-STRING argument is like that of 'AC_ARG_WITH' (*note
External Software::).
You should format your HELP-STRING with the macro 'AS_HELP_STRING'
(*note Pretty Help Strings::).
See the examples suggested with the definition of 'AC_ARG_WITH'
(*note External Software::) to get an idea of possible applications
of 'AC_ARG_ENABLE'.
File: autoconf.info, Node: Pretty Help Strings, Next: Option Checking, Prev: Package Options, Up: Site Configuration
15.4 Making Your Help Strings Look Pretty
=========================================
Properly formatting the 'help strings' which are used in 'AC_ARG_WITH'
(*note External Software::) and 'AC_ARG_ENABLE' (*note Package
Options::) can be challenging. Specifically, you want your own 'help
strings' to line up in the appropriate columns of 'configure --help'
just like the standard Autoconf 'help strings' do. This is the purpose
of the 'AS_HELP_STRING' macro.
-- Macro: AS_HELP_STRING (LEFT-HAND-SIDE, RIGHT-HAND-SIDE
[INDENT-COLUMN = 26], [WRAP-COLUMN = 79])
Expands into a help string that looks pretty when the user executes
'configure --help'. It is typically used in 'AC_ARG_WITH' (*note
External Software::) or 'AC_ARG_ENABLE' (*note Package Options::).
The following example makes this clearer.
AC_ARG_WITH([foo],
[AS_HELP_STRING([--with-foo],
[use foo (default is no)])],
[use_foo=$withval],
[use_foo=no])
Then the last few lines of 'configure --help' appear like this:
--enable and --with options recognized:
--with-foo use foo (default is no)
Macro expansion is performed on the first argument. However, the
second argument of 'AS_HELP_STRING' is treated as a whitespace
separated list of text to be reformatted, and is not subject to
macro expansion. Since it is not expanded, it should not be double
quoted. *Note Autoconf Language::, for a more detailed
explanation.
The 'AS_HELP_STRING' macro is particularly helpful when the
LEFT-HAND-SIDE and/or RIGHT-HAND-SIDE are composed of macro
arguments, as shown in the following example. Be aware that
LEFT-HAND-SIDE may not expand to unbalanced quotes, although
quadrigraphs can be used.
AC_DEFUN([MY_ARG_WITH],
[AC_ARG_WITH(m4_translit([[$1]], [_], [-]),
[AS_HELP_STRING([--with-m4_translit([$1], [_], [-])],
[use $1 (default is $2)])],
[use_[]$1=$withval],
[use_[]$1=$2])])
MY_ARG_WITH([a_b], [no])
Here, the last few lines of 'configure --help' will include:
--enable and --with options recognized:
--with-a-b use a_b (default is no)
The parameters INDENT-COLUMN and WRAP-COLUMN were introduced in
Autoconf 2.62. Generally, they should not be specified; they exist
for fine-tuning of the wrapping.
AS_HELP_STRING([--option], [description of option])
=> --option description of option
AS_HELP_STRING([--option], [description of option], [15], [30])
=> --option description of
=> option
File: autoconf.info, Node: Option Checking, Next: Site Details, Prev: Pretty Help Strings, Up: Site Configuration
15.5 Controlling Checking of 'configure' Options
================================================
The 'configure' script checks its command-line options against a list of
known options, like '--help' or '--config-cache'. An unknown option
ordinarily indicates a mistake by the user and 'configure' halts with an
error. However, by default unknown '--with-PACKAGE' and
'--enable-FEATURE' options elicit only a warning, to support configuring
entire source trees.
Source trees often contain multiple packages with a top-level
'configure' script that uses the 'AC_CONFIG_SUBDIRS' macro (*note
Subdirectories::). Because the packages generally support different
'--with-PACKAGE' and '--enable-FEATURE' options, the GNU Coding
Standards say they must accept unrecognized options without halting.
Even a warning message is undesirable here, so 'AC_CONFIG_SUBDIRS'
automatically disables the warnings.
This default behavior may be modified in two ways. First, the
installer can invoke 'configure --disable-option-checking' to disable
these warnings, or invoke 'configure --enable-option-checking=fatal'
options to turn them into fatal errors, respectively. Second, the
maintainer can use 'AC_DISABLE_OPTION_CHECKING'.
-- Macro: AC_DISABLE_OPTION_CHECKING
By default, disable warnings related to any unrecognized
'--with-PACKAGE' or '--enable-FEATURE' options. This is implied by
'AC_CONFIG_SUBDIRS'.
The installer can override this behavior by passing
'--enable-option-checking' (enable warnings) or
'--enable-option-checking=fatal' (enable errors) to 'configure'.
File: autoconf.info, Node: Site Details, Next: Transforming Names, Prev: Option Checking, Up: Site Configuration
15.6 Configuring Site Details
=============================
Some software packages require complex site-specific information. Some
examples are host names to use for certain services, company names, and
email addresses to contact. Since some configuration scripts generated
by Metaconfig ask for such information interactively, people sometimes
wonder how to get that information in Autoconf-generated configuration
scripts, which aren't interactive.
Such site configuration information should be put in a file that is
edited _only by users_, not by programs. The location of the file can
either be based on the 'prefix' variable, or be a standard location such
as the user's home directory. It could even be specified by an
environment variable. The programs should examine that file at runtime,
rather than at compile time. Runtime configuration is more convenient
for users and makes the configuration process simpler than getting the
information while configuring. *Note Variables for Installation
Directories: (standards)Directory Variables, for more information on
where to put data files.
File: autoconf.info, Node: Transforming Names, Next: Site Defaults, Prev: Site Details, Up: Site Configuration
15.7 Transforming Program Names When Installing
===============================================
Autoconf supports changing the names of programs when installing them.
In order to use these transformations, 'configure.ac' must call the
macro 'AC_ARG_PROGRAM'.
-- Macro: AC_ARG_PROGRAM
Place in output variable 'program_transform_name' a sequence of
'sed' commands for changing the names of installed programs.
If any of the options described below are given to 'configure',
program names are transformed accordingly. Otherwise, if
'AC_CANONICAL_TARGET' has been called and a '--target' value is
given, the target type followed by a dash is used as a prefix.
Otherwise, no program name transformation is done.
* Menu:
* Transformation Options:: 'configure' options to transform names
* Transformation Examples:: Sample uses of transforming names
* Transformation Rules:: Makefile uses of transforming names
File: autoconf.info, Node: Transformation Options, Next: Transformation Examples, Up: Transforming Names
15.7.1 Transformation Options
-----------------------------
You can specify name transformations by giving 'configure' these command
line options:
'--program-prefix=PREFIX'
prepend PREFIX to the names;
'--program-suffix=SUFFIX'
append SUFFIX to the names;
'--program-transform-name=EXPRESSION'
perform 'sed' substitution EXPRESSION on the names.
File: autoconf.info, Node: Transformation Examples, Next: Transformation Rules, Prev: Transformation Options, Up: Transforming Names
15.7.2 Transformation Examples
------------------------------
These transformations are useful with programs that can be part of a
cross-compilation development environment. For example, a
cross-assembler running on a Sun 4 configured with
'--target=i960-vxworks' is normally installed as 'i960-vxworks-as',
rather than 'as', which could be confused with a native Sun 4 assembler.
You can force a program name to begin with 'g', if you don't want GNU
programs installed on your system to shadow other programs with the same
name. For example, if you configure GNU 'diff' with
'--program-prefix=g', then when you run 'make install' it is installed
as '/usr/local/bin/gdiff'.
As a more sophisticated example, you could use
--program-transform-name='s/^/g/; s/^gg/g/; s/^gless/less/'
to prepend 'g' to most of the program names in a source tree,
excepting those like 'gdb' that already have one and those like 'less'
and 'lesskey' that aren't GNU programs. (That is assuming that you have
a source tree containing those programs that is set up to use this
feature.)
One way to install multiple versions of some programs simultaneously
is to append a version number to the name of one or both. For example,
if you want to keep Autoconf version 1 around for awhile, you can
configure Autoconf version 2 using '--program-suffix=2' to install the
programs as '/usr/local/bin/autoconf2', '/usr/local/bin/autoheader2',
etc. Nevertheless, pay attention that only the binaries are renamed,
therefore you'd have problems with the library files which might
overlap.
File: autoconf.info, Node: Transformation Rules, Prev: Transformation Examples, Up: Transforming Names
15.7.3 Transformation Rules
---------------------------
Here is how to use the variable 'program_transform_name' in a
'Makefile.in':
PROGRAMS = cp ls rm
transform = @program_transform_name@
install:
for p in $(PROGRAMS); do \
$(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p | \
sed '$(transform)'`; \
done
uninstall:
for p in $(PROGRAMS); do \
rm -f $(DESTDIR)$(bindir)/`echo $$p | sed '$(transform)'`; \
done
It is guaranteed that 'program_transform_name' is never empty, and
that there are no useless separators. Therefore you may safely embed
'program_transform_name' within a sed program using ';':
transform = @program_transform_name@
transform_exe = s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/
Whether to do the transformations on documentation files (Texinfo or
'man') is a tricky question; there seems to be no perfect answer, due to
the several reasons for name transforming. Documentation is not usually
particular to a specific architecture, and Texinfo files do not conflict
with system documentation. But they might conflict with earlier
versions of the same files, and 'man' pages sometimes do conflict with
system documentation. As a compromise, it is probably best to do name
transformations on 'man' pages but not on Texinfo manuals.
File: autoconf.info, Node: Site Defaults, Prev: Transforming Names, Up: Site Configuration
15.8 Setting Site Defaults
==========================
Autoconf-generated 'configure' scripts allow your site to provide
default values for some configuration values. You do this by creating
site- and system-wide initialization files.
If the environment variable 'CONFIG_SITE' is set, 'configure' uses
its value as the name of a shell script to read; it is recommended that
this be an absolute file name. Otherwise, it reads the shell script
'PREFIX/share/config.site' if it exists, then 'PREFIX/etc/config.site'
if it exists. Thus, settings in machine-specific files override those
in machine-independent ones in case of conflict.
Site files can be arbitrary shell scripts, but only certain kinds of
code are really appropriate to be in them. Because 'configure' reads
any cache file after it has read any site files, a site file can define
a default cache file to be shared between all Autoconf-generated
'configure' scripts run on that system (*note Cache Files::). If you
set a default cache file in a site file, it is a good idea to also set
the output variable 'CC' in that site file, because the cache file is
only valid for a particular compiler, but many systems have several
available.
You can examine or override the value set by a command line option to
'configure' in a site file; options set shell variables that have the
same names as the options, with any dashes turned into underscores. The
exceptions are that '--without-' and '--disable-' options are like
giving the corresponding '--with-' or '--enable-' option and the value
'no'. Thus, '--cache-file=localcache' sets the variable 'cache_file' to
the value 'localcache'; '--enable-warnings=no' or '--disable-warnings'
sets the variable 'enable_warnings' to the value 'no'; '--prefix=/usr'
sets the variable 'prefix' to the value '/usr'; etc.
Site files are also good places to set default values for other
output variables, such as 'CFLAGS', if you need to give them non-default
values: anything you would normally do, repetitively, on the command
line. If you use non-default values for PREFIX or EXEC_PREFIX (wherever
you locate the site file), you can set them in the site file if you
specify it with the 'CONFIG_SITE' environment variable.
You can set some cache values in the site file itself. Doing this is
useful if you are cross-compiling, where it is impossible to check
features that require running a test program. You could "prime the
cache" by setting those values correctly for that system in
'PREFIX/etc/config.site'. To find out the names of the cache variables
you need to set, see the documentation of the respective Autoconf macro.
If the variables or their semantics are undocumented, you may need to
look for shell variables with '_cv_' in their names in the affected
'configure' scripts, or in the Autoconf M4 source code for those macros;
but in that case, their name or semantics may change in a future
Autoconf version.
The cache file is careful to not override any variables set in the
site files. Similarly, you should not override command-line options in
the site files. Your code should check that variables such as 'prefix'
and 'cache_file' have their default values (as set near the top of
'configure') before changing them.
Here is a sample file '/usr/share/local/gnu/share/config.site'. The
command 'configure --prefix=/usr/share/local/gnu' would read this file
(if 'CONFIG_SITE' is not set to a different file).
# /usr/share/local/gnu/share/config.site for configure
#
# Change some defaults.
test "$prefix" = NONE && prefix=/usr/share/local/gnu
test "$exec_prefix" = NONE && exec_prefix=/usr/local/gnu
test "$sharedstatedir" = '${prefix}/com' && sharedstatedir=/var
test "$localstatedir" = '${prefix}/var' && localstatedir=/var
# Give Autoconf 2.x generated configure scripts a shared default
# cache file for feature test results, architecture-specific.
if test "$cache_file" = /dev/null; then
cache_file="$prefix/var/config.cache"
# A cache file is only valid for one C compiler.
CC=gcc
fi
Another use of 'config.site' is for priming the directory variables
in a manner consistent with the Filesystem Hierarchy Standard (FHS).
Once the following file is installed at '/usr/share/config.site', a user
can execute simply './configure --prefix=/usr' to get all the
directories chosen in the locations recommended by FHS.
# /usr/share/config.site for FHS defaults when installing below /usr,
# and the respective settings were not changed on the command line.
if test "$prefix" = /usr; then
test "$sysconfdir" = '${prefix}/etc' && sysconfdir=/etc
test "$sharedstatedir" = '${prefix}/com' && sharedstatedir=/var
test "$localstatedir" = '${prefix}/var' && localstatedir=/var
fi
Likewise, on platforms where 64-bit libraries are built by default,
then installed in '/usr/local/lib64' instead of '/usr/local/lib', it is
appropriate to install '/usr/local/share/config.site':
# /usr/local/share/config.site for platforms that prefer
# the directory /usr/local/lib64 over /usr/local/lib.
test "$libdir" = '${exec_prefix}/lib' && libdir='${exec_prefix}/lib64'
File: autoconf.info, Node: Running configure Scripts, Next: config.status Invocation, Prev: Site Configuration, Up: Top
16 Running 'configure' Scripts
******************************
Below are instructions on how to configure a package that uses a
'configure' script, suitable for inclusion as an 'INSTALL' file in the
package. A plain-text version of 'INSTALL' which you may use comes with
Autoconf.
* Menu:
* Basic Installation:: Instructions for typical cases
* Compilers and Options:: Selecting compilers and optimization
* Multiple Architectures:: Compiling for multiple architectures at once
* Installation Names:: Installing in different directories
* Optional Features:: Selecting optional features
* Particular Systems:: Particular systems
* System Type:: Specifying the system type
* Sharing Defaults:: Setting site-wide defaults for 'configure'
* Defining Variables:: Specifying the compiler etc.
* configure Invocation:: Changing how 'configure' runs
File: autoconf.info, Node: Basic Installation, Next: Compilers and Options, Up: Running configure Scripts
16.1 Basic Installation
=======================
Briefly, the shell commands './configure; make; make install' should
configure, build, and install this package. The following more-detailed
instructions are generic; see the 'README' file for instructions
specific to this package. More recommendations for GNU packages can be
found in *note Makefile Conventions: (standards)Makefile Conventions.
The 'configure' shell script attempts to guess correct values for
various system-dependent variables used during compilation. It uses
those values to create a 'Makefile' in each directory of the package.
It may also create one or more '.h' files containing system-dependent
definitions. Finally, it creates a shell script 'config.status' that
you can run in the future to recreate the current configuration, and a
file 'config.log' containing compiler output (useful mainly for
debugging 'configure').
It can also use an optional file (typically called 'config.cache' and
enabled with '--cache-file=config.cache' or simply '-C') that saves the
results of its tests to speed up reconfiguring. Caching is disabled by
default to prevent problems with accidental use of stale cache files.
If you need to do unusual things to compile the package, please try
to figure out how 'configure' could check whether to do them, and mail
diffs or instructions to the address given in the 'README' so they can
be considered for the next release. If you are using the cache, and at
some point 'config.cache' contains results you don't want to keep, you
may remove or edit it.
The file 'configure.ac' (or 'configure.in') is used to create
'configure' by a program called 'autoconf'. You need 'configure.ac' if
you want to change it or regenerate 'configure' using a newer version of
'autoconf'.
The simplest way to compile this package is:
1. 'cd' to the directory containing the package's source code and type
'./configure' to configure the package for your system.
Running 'configure' might take a while. While running, it prints
some messages telling which features it is checking for.
2. Type 'make' to compile the package.
3. Optionally, type 'make check' to run any self-tests that come with
the package, generally using the just-built uninstalled binaries.
4. Type 'make install' to install the programs and any data files and
documentation. When installing into a prefix owned by root, it is
recommended that the package be configured and built as a regular
user, and only the 'make install' phase executed with root
privileges.
5. Optionally, type 'make installcheck' to repeat any self-tests, but
this time using the binaries in their final installed location.
This target does not install anything. Running this target as a
regular user, particularly if the prior 'make install' required
root privileges, verifies that the installation completed
correctly.
6. You can remove the program binaries and object files from the
source code directory by typing 'make clean'. To also remove the
files that 'configure' created (so you can compile the package for
a different kind of computer), type 'make distclean'. There is
also a 'make maintainer-clean' target, but that is intended mainly
for the package's developers. If you use it, you may have to get
all sorts of other programs in order to regenerate files that came
with the distribution.
7. Often, you can also type 'make uninstall' to remove the installed
files again. In practice, not all packages have tested that
uninstallation works correctly, even though it is required by the
GNU Coding Standards.
8. Some packages, particularly those that use Automake, provide 'make
distcheck', which can by used by developers to test that all other
targets like 'make install' and 'make uninstall' work correctly.
This target is generally not run by end users.
File: autoconf.info, Node: Compilers and Options, Next: Multiple Architectures, Prev: Basic Installation, Up: Running configure Scripts
16.2 Compilers and Options
==========================
Some systems require unusual options for compilation or linking that the
'configure' script does not know about. Run './configure --help' for
details on some of the pertinent environment variables.
You can give 'configure' initial values for configuration parameters
by setting variables in the command line or in the environment. Here is
an example:
./configure CC=c99 CFLAGS=-g LIBS=-lposix
*Note Defining Variables::, for more details.
File: autoconf.info, Node: Multiple Architectures, Next: Installation Names, Prev: Compilers and Options, Up: Running configure Scripts
16.3 Compiling For Multiple Architectures
=========================================
You can compile the package for more than one kind of computer at the
same time, by placing the object files for each architecture in their
own directory. To do this, you can use GNU 'make'. 'cd' to the
directory where you want the object files and executables to go and run
the 'configure' script. 'configure' automatically checks for the source
code in the directory that 'configure' is in and in '..'. This is known
as a "VPATH" build.
With a non-GNU 'make', it is safer to compile the package for one
architecture at a time in the source code directory. After you have
installed the package for one architecture, use 'make distclean' before
reconfiguring for another architecture.
On MacOS X 10.5 and later systems, you can create libraries and
executables that work on multiple system types--known as "fat" or
"universal" binaries--by specifying multiple '-arch' options to the
compiler but only a single '-arch' option to the preprocessor. Like
this:
./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
CPP="gcc -E" CXXCPP="g++ -E"
This is not guaranteed to produce working output in all cases, you
may have to build one architecture at a time and combine the results
using the 'lipo' tool if you have problems.
File: autoconf.info, Node: Installation Names, Next: Optional Features, Prev: Multiple Architectures, Up: Running configure Scripts
16.4 Installation Names
=======================
By default, 'make install' installs the package's commands under
'/usr/local/bin', include files under '/usr/local/include', etc. You
can specify an installation prefix other than '/usr/local' by giving
'configure' the option '--prefix=PREFIX', where PREFIX must be an
absolute file name.
You can specify separate installation prefixes for
architecture-specific files and architecture-independent files. If you
pass the option '--exec-prefix=PREFIX' to 'configure', the package uses
PREFIX as the prefix for installing programs and libraries.
Documentation and other data files still use the regular prefix.
In addition, if you use an unusual directory layout you can give
options like '--bindir=DIR' to specify different values for particular
kinds of files. Run 'configure --help' for a list of the directories
you can set and what kinds of files go in them. In general, the default
for these options is expressed in terms of '${prefix}', so that
specifying just '--prefix' will affect all of the other directory
specifications that were not explicitly provided.
The most portable way to affect installation locations is to pass the
correct locations to 'configure'; however, many packages provide one or
both of the following shortcuts of passing variable assignments to the
'make install' command line to change installation locations without
having to reconfigure or recompile.
The first method involves providing an override variable for each
affected directory. For example, 'make install
prefix=/alternate/directory' will choose an alternate location for all
directory configuration variables that were expressed in terms of
'${prefix}'. Any directories that were specified during 'configure',
but not in terms of '${prefix}', must each be overridden at install time
for the entire installation to be relocated. The approach of makefile
variable overrides for each directory variable is required by the GNU
Coding Standards, and ideally causes no recompilation. However, some
platforms have known limitations with the semantics of shared libraries
that end up requiring recompilation when using this method, particularly
noticeable in packages that use GNU Libtool.
The second method involves providing the 'DESTDIR' variable. For
example, 'make install DESTDIR=/alternate/directory' will prepend
'/alternate/directory' before all installation names. The approach of
'DESTDIR' overrides is not required by the GNU Coding Standards, and
does not work on platforms that have drive letters. On the other hand,
it does better at avoiding recompilation issues, and works well even
when some directory options were not specified in terms of '${prefix}'
at 'configure' time.
File: autoconf.info, Node: Optional Features, Next: Particular Systems, Prev: Installation Names, Up: Running configure Scripts
16.5 Optional Features
======================
If the package supports it, you can cause programs to be installed with
an extra prefix or suffix on their names by giving 'configure' the
option '--program-prefix=PREFIX' or '--program-suffix=SUFFIX'.
Some packages pay attention to '--enable-FEATURE' options to
'configure', where FEATURE indicates an optional part of the package.
They may also pay attention to '--with-PACKAGE' options, where PACKAGE
is something like 'gnu-as' or 'x' (for the X Window System). The
'README' should mention any '--enable-' and '--with-' options that the
package recognizes.
For packages that use the X Window System, 'configure' can usually
find the X include and library files automatically, but if it doesn't,
you can use the 'configure' options '--x-includes=DIR' and
'--x-libraries=DIR' to specify their locations.
Some packages offer the ability to configure how verbose the
execution of 'make' will be. For these packages, running './configure
--enable-silent-rules' sets the default to minimal output, which can be
overridden with 'make V=1'; while running './configure
--disable-silent-rules' sets the default to verbose, which can be
overridden with 'make V=0'.
File: autoconf.info, Node: Particular Systems, Next: System Type, Prev: Optional Features, Up: Running configure Scripts
16.6 Particular systems
=======================
On HP-UX, the default C compiler is not ANSI C compatible. If GNU CC is
not installed, it is recommended to use the following options in order
to use an ANSI C compiler:
./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
and if that doesn't work, install pre-built binaries of GCC for HP-UX.
HP-UX 'make' updates targets which have the same time stamps as their
prerequisites, which makes it generally unusable when shipped generated
files such as 'configure' are involved. Use GNU 'make' instead.
On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
parse its '<wchar.h>' header file. The option '-nodtk' can be used as a
workaround. If GNU CC is not installed, it is therefore recommended to
try
./configure CC="cc"
and if that doesn't work, try
./configure CC="cc -nodtk"
On Solaris, don't put '/usr/ucb' early in your 'PATH'. This
directory contains several dysfunctional programs; working variants of
these programs are available in '/usr/bin'. So, if you need '/usr/ucb'
in your 'PATH', put it _after_ '/usr/bin'.
On Haiku, software installed for all users goes in '/boot/common',
not '/usr/local'. It is recommended to use the following options:
./configure --prefix=/boot/common
File: autoconf.info, Node: System Type, Next: Sharing Defaults, Prev: Particular Systems, Up: Running configure Scripts
16.7 Specifying the System Type
===============================
There may be some features 'configure' cannot figure out automatically,
but needs to determine by the type of machine the package will run on.
Usually, assuming the package is built to be run on the _same_
architectures, 'configure' can figure that out, but if it prints a
message saying it cannot guess the machine type, give it the
'--build=TYPE' option. TYPE can either be a short name for the system
type, such as 'sun4', or a canonical name which has the form:
CPU-COMPANY-SYSTEM
where SYSTEM can have one of these forms:
OS
KERNEL-OS
See the file 'config.sub' for the possible values of each field. If
'config.sub' isn't included in this package, then this package doesn't
need to know the machine type.
If you are _building_ compiler tools for cross-compiling, you should
use the option '--target=TYPE' to select the type of system they will
produce code for.
If you want to _use_ a cross compiler, that generates code for a
platform different from the build platform, you should specify the
"host" platform (i.e., that on which the generated programs will
eventually be run) with '--host=TYPE'.
File: autoconf.info, Node: Sharing Defaults, Next: Defining Variables, Prev: System Type, Up: Running configure Scripts
16.8 Sharing Defaults
=====================
If you want to set default values for 'configure' scripts to share, you
can create a site shell script called 'config.site' that gives default
values for variables like 'CC', 'cache_file', and 'prefix'. 'configure'
looks for 'PREFIX/share/config.site' if it exists, then
'PREFIX/etc/config.site' if it exists. Or, you can set the
'CONFIG_SITE' environment variable to the location of the site script.
A warning: not all 'configure' scripts look for a site script.
File: autoconf.info, Node: Defining Variables, Next: configure Invocation, Prev: Sharing Defaults, Up: Running configure Scripts
16.9 Defining Variables
=======================
Variables not defined in a site shell script can be set in the
environment passed to 'configure'. However, some packages may run
configure again during the build, and the customized values of these
variables may be lost. In order to avoid this problem, you should set
them in the 'configure' command line, using 'VAR=value'. For example:
./configure CC=/usr/local2/bin/gcc
causes the specified 'gcc' to be used as the C compiler (unless it is
overridden in the site shell script).
Unfortunately, this technique does not work for 'CONFIG_SHELL' due to an
Autoconf limitation. Until the limitation is lifted, you can use this
workaround:
CONFIG_SHELL=/bin/bash ./configure CONFIG_SHELL=/bin/bash
File: autoconf.info, Node: configure Invocation, Prev: Defining Variables, Up: Running configure Scripts
16.10 'configure' Invocation
============================
'configure' recognizes the following options to control how it operates.
'--help'
'-h'
Print a summary of all of the options to 'configure', and exit.
'--help=short'
'--help=recursive'
Print a summary of the options unique to this package's
'configure', and exit. The 'short' variant lists options used only
in the top level, while the 'recursive' variant lists options also
present in any nested packages.
'--version'
'-V'
Print the version of Autoconf used to generate the 'configure'
script, and exit.
'--cache-file=FILE'
Enable the cache: use and save the results of the tests in FILE,
traditionally 'config.cache'. FILE defaults to '/dev/null' to
disable caching.
'--config-cache'
'-C'
Alias for '--cache-file=config.cache'.
'--quiet'
'--silent'
'-q'
Do not print messages saying which checks are being made. To
suppress all normal output, redirect it to '/dev/null' (any error
messages will still be shown).
'--srcdir=DIR'
Look for the package's source code in directory DIR. Usually
'configure' can determine that directory automatically.
'--prefix=DIR'
Use DIR as the installation prefix. *note Installation Names:: for
more details, including other options available for fine-tuning the
installation locations.
'--no-create'
'-n'
Run the configure checks, but stop before creating any output
files.
'configure' also accepts some other, not widely useful, options. Run
'configure --help' for more details.
File: autoconf.info, Node: config.status Invocation, Next: Obsolete Constructs, Prev: Running configure Scripts, Up: Top
17 config.status Invocation
***************************
The 'configure' script creates a file named 'config.status', which
actually configures, "instantiates", the template files. It also
records the configuration options that were specified when the package
was last configured in case reconfiguring is needed.
Synopsis:
./config.status [OPTION]... [TAG]...
It configures each TAG; if none are specified, all the templates are
instantiated. A TAG refers to a file or other tag associated with a
configuration action, as specified by an 'AC_CONFIG_ITEMS' macro (*note
Configuration Actions::). The files must be specified without their
dependencies, as in
./config.status foobar
not
./config.status foobar:foo.in:bar.in
The supported options are:
'--help'
'-h'
Print a summary of the command line options, the list of the
template files, and exit.
'--version'
'-V'
Print the version number of Autoconf and the configuration
settings, and exit.
'--config'
Print the configuration settings in reusable way, quoted for the
shell, and exit. For example, for a debugging build that otherwise
reuses the configuration from a different build directory BUILD-DIR
of a package in SRC-DIR, you could use the following:
args=`BUILD-DIR/config.status --config`
eval SRC-DIR/configure "$args" CFLAGS=-g --srcdir=SRC-DIR
Note that it may be necessary to override a '--srcdir' setting that
was saved in the configuration, if the arguments are used in a
different build directory.
'--silent'
'--quiet'
'-q'
Do not print progress messages.
'--debug'
'-d'
Don't remove the temporary files.
'--file=FILE[:TEMPLATE]'
Require that FILE be instantiated as if
'AC_CONFIG_FILES(FILE:TEMPLATE)' was used. Both FILE and TEMPLATE
may be '-' in which case the standard output and/or standard input,
respectively, is used. If a TEMPLATE file name is relative, it is
first looked for in the build tree, and then in the source tree.
*Note Configuration Actions::, for more details.
This option and the following ones provide one way for separately
distributed packages to share the values computed by 'configure'.
Doing so can be useful if some of the packages need a superset of
the features that one of them, perhaps a common library, does.
These options allow a 'config.status' file to create files other
than the ones that its 'configure.ac' specifies, so it can be used
for a different package, or for extracting a subset of values. For
example,
echo '@CC@' | ./config.status --file=-
provides the value of '@CC@' on standard output.
'--header=FILE[:TEMPLATE]'
Same as '--file' above, but with 'AC_CONFIG_HEADERS'.
'--recheck'
Ask 'config.status' to update itself and exit (no instantiation).
This option is useful if you change 'configure', so that the
results of some tests might be different from the previous run.
The '--recheck' option reruns 'configure' with the same arguments
you used before, plus the '--no-create' option, which prevents
'configure' from running 'config.status' and creating 'Makefile'
and other files, and the '--no-recursion' option, which prevents
'configure' from running other 'configure' scripts in
subdirectories. (This is so other Make rules can run
'config.status' when it changes; *note Automatic Remaking::, for an
example).
'config.status' checks several optional environment variables that
can alter its behavior:
-- Variable: CONFIG_SHELL
The shell with which to run 'configure'. It must be
Bourne-compatible, and the absolute name of the shell should be
passed. The default is a shell that supports 'LINENO' if
available, and '/bin/sh' otherwise.
-- Variable: CONFIG_STATUS
The file name to use for the shell script that records the
configuration. The default is './config.status'. This variable is
useful when one package uses parts of another and the 'configure'
scripts shouldn't be merged because they are maintained separately.
You can use './config.status' in your makefiles. For example, in the
dependencies given above (*note Automatic Remaking::), 'config.status'
is run twice when 'configure.ac' has changed. If that bothers you, you
can make each run only regenerate the files for that rule:
config.h: stamp-h
stamp-h: config.h.in config.status
./config.status config.h
echo > stamp-h
Makefile: Makefile.in config.status
./config.status Makefile
The calling convention of 'config.status' has changed; see *note
Obsolete config.status Use::, for details.
File: autoconf.info, Node: Obsolete Constructs, Next: Using Autotest, Prev: config.status Invocation, Up: Top
18 Obsolete Constructs
**********************
Autoconf changes, and throughout the years some constructs have been
obsoleted. Most of the changes involve the macros, but in some cases
the tools themselves, or even some concepts, are now considered
obsolete.
You may completely skip this chapter if you are new to Autoconf. Its
intention is mainly to help maintainers updating their packages by
understanding how to move to more modern constructs.
* Menu:
* Obsolete config.status Use:: Obsolete convention for 'config.status'
* acconfig Header:: Additional entries in 'config.h.in'
* autoupdate Invocation:: Automatic update of 'configure.ac'
* Obsolete Macros:: Backward compatibility macros
* Autoconf 1:: Tips for upgrading your files
* Autoconf 2.13:: Some fresher tips
File: autoconf.info, Node: Obsolete config.status Use, Next: acconfig Header, Up: Obsolete Constructs
18.1 Obsolete 'config.status' Invocation
========================================
'config.status' now supports arguments to specify the files to
instantiate; see *note config.status Invocation::, for more details.
Before, environment variables had to be used.
-- Variable: CONFIG_COMMANDS
The tags of the commands to execute. The default is the arguments
given to 'AC_OUTPUT' and 'AC_CONFIG_COMMANDS' in 'configure.ac'.
-- Variable: CONFIG_FILES
The files in which to perform '@VARIABLE@' substitutions. The
default is the arguments given to 'AC_OUTPUT' and 'AC_CONFIG_FILES'
in 'configure.ac'.
-- Variable: CONFIG_HEADERS
The files in which to substitute C '#define' statements. The
default is the arguments given to 'AC_CONFIG_HEADERS'; if that
macro was not called, 'config.status' ignores this variable.
-- Variable: CONFIG_LINKS
The symbolic links to establish. The default is the arguments
given to 'AC_CONFIG_LINKS'; if that macro was not called,
'config.status' ignores this variable.
In *note config.status Invocation::, using this old interface, the
example would be:
config.h: stamp-h
stamp-h: config.h.in config.status
CONFIG_COMMANDS= CONFIG_LINKS= CONFIG_FILES= \
CONFIG_HEADERS=config.h ./config.status
echo > stamp-h
Makefile: Makefile.in config.status
CONFIG_COMMANDS= CONFIG_LINKS= CONFIG_HEADERS= \
CONFIG_FILES=Makefile ./config.status
(If 'configure.ac' does not call 'AC_CONFIG_HEADERS', there is no need
to set 'CONFIG_HEADERS' in the 'make' rules. Equally for
'CONFIG_COMMANDS', etc.)
File: autoconf.info, Node: acconfig Header, Next: autoupdate Invocation, Prev: Obsolete config.status Use, Up: Obsolete Constructs
18.2 'acconfig.h'
=================
In order to produce 'config.h.in', 'autoheader' needs to build or to
find templates for each symbol. Modern releases of Autoconf use
'AH_VERBATIM' and 'AH_TEMPLATE' (*note Autoheader Macros::), but in
older releases a file, 'acconfig.h', contained the list of needed
templates. 'autoheader' copied comments and '#define' and '#undef'
statements from 'acconfig.h' in the current directory, if present. This
file used to be mandatory if you 'AC_DEFINE' any additional symbols.
Modern releases of Autoconf also provide 'AH_TOP' and 'AH_BOTTOM' if
you need to prepend/append some information to 'config.h.in'. Ancient
versions of Autoconf had a similar feature: if './acconfig.h' contains
the string '@TOP@', 'autoheader' copies the lines before the line
containing '@TOP@' into the top of the file that it generates.
Similarly, if './acconfig.h' contains the string '@BOTTOM@',
'autoheader' copies the lines after that line to the end of the file it
generates. Either or both of those strings may be omitted. An even
older alternate way to produce the same effect in ancient versions of
Autoconf is to create the files 'FILE.top' (typically 'config.h.top')
and/or 'FILE.bot' in the current directory. If they exist, 'autoheader'
copies them to the beginning and end, respectively, of its output.
In former versions of Autoconf, the files used in preparing a
software package for distribution were:
configure.ac --. .------> autoconf* -----> configure
+---+
[aclocal.m4] --+ `---.
[acsite.m4] ---' |
+--> [autoheader*] -> [config.h.in]
[acconfig.h] ----. |
+-----'
[config.h.top] --+
[config.h.bot] --'
Using only the 'AH_' macros, 'configure.ac' should be self-contained,
and should not depend upon 'acconfig.h' etc.
File: autoconf.info, Node: autoupdate Invocation, Next: Obsolete Macros, Prev: acconfig Header, Up: Obsolete Constructs
18.3 Using 'autoupdate' to Modernize 'configure.ac'
===================================================
The 'autoupdate' program updates a 'configure.ac' file that calls
Autoconf macros by their old names to use the current macro names. In
version 2 of Autoconf, most of the macros were renamed to use a more
uniform and descriptive naming scheme. *Note Macro Names::, for a
description of the new scheme. Although the old names still work (*note
Obsolete Macros::, for a list of the old macros and the corresponding
new names), you can make your 'configure.ac' files more readable and
make it easier to use the current Autoconf documentation if you update
them to use the new macro names.
If given no arguments, 'autoupdate' updates 'configure.ac', backing
up the original version with the suffix '~' (or the value of the
environment variable 'SIMPLE_BACKUP_SUFFIX', if that is set). If you
give 'autoupdate' an argument, it reads that file instead of
'configure.ac' and writes the updated file to the standard output.
'autoupdate' accepts the following options:
'--help'
'-h'
Print a summary of the command line options and exit.
'--version'
'-V'
Print the version number of Autoconf and exit.
'--verbose'
'-v'
Report processing steps.
'--debug'
'-d'
Don't remove the temporary files.
'--force'
'-f'
Force the update even if the file has not changed. Disregard the
cache.
'--include=DIR'
'-I DIR'
Also look for input files in DIR. Multiple invocations accumulate.
Directories are browsed from last to first.
'--prepend-include=DIR'
'-B DIR'
Prepend directory DIR to the search path. This is used to include
the language-specific files before any third-party macros.
File: autoconf.info, Node: Obsolete Macros, Next: Autoconf 1, Prev: autoupdate Invocation, Up: Obsolete Constructs
18.4 Obsolete Macros
====================
Several macros are obsoleted in Autoconf, for various reasons (typically
they failed to quote properly, couldn't be extended for more recent
issues, etc.). They are still supported, but deprecated: their use
should be avoided.
During the jump from Autoconf version 1 to version 2, most of the
macros were renamed to use a more uniform and descriptive naming scheme,
but their signature did not change. *Note Macro Names::, for a
description of the new naming scheme. Below, if there is just the
mapping from old names to new names for these macros, the reader is
invited to refer to the definition of the new macro for the signature
and the description.
-- Macro: AC_AIX
This macro is a platform-specific subset of
'AC_USE_SYSTEM_EXTENSIONS' (*note AC_USE_SYSTEM_EXTENSIONS::).
-- Macro: AC_ALLOCA
Replaced by 'AC_FUNC_ALLOCA' (*note AC_FUNC_ALLOCA::).
-- Macro: AC_ARG_ARRAY
Removed because of limited usefulness.
-- Macro: AC_C_CROSS
This macro is obsolete; it does nothing.
-- Macro: AC_C_LONG_DOUBLE
If the C compiler supports a working 'long double' type with more
range or precision than the 'double' type, define
'HAVE_LONG_DOUBLE'.
You should use 'AC_TYPE_LONG_DOUBLE' or 'AC_TYPE_LONG_DOUBLE_WIDER'
instead. *Note Particular Types::.
-- Macro: AC_CANONICAL_SYSTEM
Determine the system type and set output variables to the names of
the canonical system types. *Note Canonicalizing::, for details
about the variables this macro sets.
The user is encouraged to use either 'AC_CANONICAL_BUILD', or
'AC_CANONICAL_HOST', or 'AC_CANONICAL_TARGET', depending on the
needs. Using 'AC_CANONICAL_TARGET' is enough to run the two other
macros (*note Canonicalizing::).
-- Macro: AC_CHAR_UNSIGNED
Replaced by 'AC_C_CHAR_UNSIGNED' (*note AC_C_CHAR_UNSIGNED::).
-- Macro: AC_CHECK_TYPE (TYPE, DEFAULT)
Autoconf, up to 2.13, used to provide this version of
'AC_CHECK_TYPE', deprecated because of its flaws. First, although
it is a member of the 'CHECK' clan, it does more than just
checking. Secondly, missing types are defined using '#define', not
'typedef', and this can lead to problems in the case of pointer
types.
This use of 'AC_CHECK_TYPE' is obsolete and discouraged; see *note
Generic Types::, for the description of the current macro.
If the type TYPE is not defined, define it to be the C (or C++)
builtin type DEFAULT, e.g., 'short int' or 'unsigned int'.
This macro is equivalent to:
AC_CHECK_TYPE([TYPE], [],
[AC_DEFINE_UNQUOTED([TYPE], [DEFAULT],
[Define to `DEFAULT'
if <sys/types.h> does not define.])])
In order to keep backward compatibility, the two versions of
'AC_CHECK_TYPE' are implemented, selected using these heuristics:
1. If there are three or four arguments, the modern version is
used.
2. If the second argument appears to be a C or C++ type, then the
obsolete version is used. This happens if the argument is a C
or C++ _builtin_ type or a C identifier ending in '_t',
optionally followed by one of '[(* ' and then by a string of
zero or more characters taken from the set '[]()* _a-zA-Z0-9'.
3. If the second argument is spelled with the alphabet of valid C
and C++ types, the user is warned and the modern version is
used.
4. Otherwise, the modern version is used.
You are encouraged either to use a valid builtin type, or to use
the equivalent modern code (see above), or better yet, to use
'AC_CHECK_TYPES' together with
#ifndef HAVE_LOFF_T
typedef loff_t off_t;
#endif
-- Macro: AC_CHECKING (FEATURE-DESCRIPTION)
Same as
AC_MSG_NOTICE([checking FEATURE-DESCRIPTION...]
*Note AC_MSG_NOTICE::.
-- Macro: AC_COMPILE_CHECK (ECHO-TEXT, INCLUDES, FUNCTION-BODY,
ACTION-IF-TRUE, [ACTION-IF-FALSE])
This is an obsolete version of 'AC_TRY_COMPILE' itself replaced by
'AC_COMPILE_IFELSE' (*note Running the Compiler::), with the
addition that it prints 'checking for ECHO-TEXT' to the standard
output first, if ECHO-TEXT is non-empty. Use 'AC_MSG_CHECKING' and
'AC_MSG_RESULT' instead to print messages (*note Printing
Messages::).
-- Macro: AC_CONST
Replaced by 'AC_C_CONST' (*note AC_C_CONST::).
-- Macro: AC_CROSS_CHECK
Same as 'AC_C_CROSS', which is obsolete too, and does nothing
':-)'.
-- Macro: AC_CYGWIN
Check for the Cygwin environment in which case the shell variable
'CYGWIN' is set to 'yes'. Don't use this macro, the dignified
means to check the nature of the host is using 'AC_CANONICAL_HOST'
(*note Canonicalizing::). As a matter of fact this macro is
defined as:
AC_REQUIRE([AC_CANONICAL_HOST])[]dnl
case $host_os in
*cygwin* ) CYGWIN=yes;;
* ) CYGWIN=no;;
esac
Beware that the variable 'CYGWIN' has a special meaning when
running Cygwin, and should not be changed. That's yet another
reason not to use this macro.
-- Macro: AC_DECL_SYS_SIGLIST
Same as:
AC_CHECK_DECLS([sys_siglist], [], [],
[#include <signal.h>
/* NetBSD declares sys_siglist in unistd.h. */
#ifdef HAVE_UNISTD_H
# include <unistd.h>
#endif
])
*Note AC_CHECK_DECLS::.
-- Macro: AC_DECL_YYTEXT
Does nothing, now integrated in 'AC_PROG_LEX' (*note
AC_PROG_LEX::).
-- Macro: AC_DIR_HEADER
Like calling 'AC_FUNC_CLOSEDIR_VOID' (*note
AC_FUNC_CLOSEDIR_VOID::) and 'AC_HEADER_DIRENT' (*note
AC_HEADER_DIRENT::), but defines a different set of C preprocessor
macros to indicate which header file is found:
Header Old Symbol New Symbol
'dirent.h' 'DIRENT' 'HAVE_DIRENT_H'
'sys/ndir.h' 'SYSNDIR' 'HAVE_SYS_NDIR_H'
'sys/dir.h' 'SYSDIR' 'HAVE_SYS_DIR_H'
'ndir.h' 'NDIR' 'HAVE_NDIR_H'
-- Macro: AC_DYNIX_SEQ
If on DYNIX/ptx, add '-lseq' to output variable 'LIBS'. This macro
used to be defined as
AC_CHECK_LIB([seq], [getmntent], [LIBS="-lseq $LIBS"])
now it is just 'AC_FUNC_GETMNTENT' (*note AC_FUNC_GETMNTENT::).
-- Macro: AC_EXEEXT
Defined the output variable 'EXEEXT' based on the output of the
compiler, which is now done automatically. Typically set to empty
string if Posix and '.exe' if a DOS variant.
-- Macro: AC_EMXOS2
Similar to 'AC_CYGWIN' but checks for the EMX environment on OS/2
and sets 'EMXOS2'. Don't use this macro, the dignified means to
check the nature of the host is using 'AC_CANONICAL_HOST' (*note
Canonicalizing::).
-- Macro: AC_ENABLE (FEATURE, ACTION-IF-GIVEN, [ACTION-IF-NOT-GIVEN])
This is an obsolete version of 'AC_ARG_ENABLE' that does not
support providing a help string (*note AC_ARG_ENABLE::).
-- Macro: AC_ERROR
Replaced by 'AC_MSG_ERROR' (*note AC_MSG_ERROR::).
-- Macro: AC_FIND_X
Replaced by 'AC_PATH_X' (*note AC_PATH_X::).
-- Macro: AC_FIND_XTRA
Replaced by 'AC_PATH_XTRA' (*note AC_PATH_XTRA::).
-- Macro: AC_FOREACH
Replaced by 'm4_foreach_w' (*note m4_foreach_w::).
-- Macro: AC_FUNC_CHECK
Replaced by 'AC_CHECK_FUNC' (*note AC_CHECK_FUNC::).
-- Macro: AC_FUNC_SETVBUF_REVERSED
Do nothing. Formerly, this macro checked whether 'setvbuf' takes
the buffering type as its second argument and the buffer pointer as
the third, instead of the other way around, and defined
'SETVBUF_REVERSED'. However, the last systems to have the problem
were those based on SVR2, which became obsolete in 1987, and the
macro is no longer needed.
-- Macro: AC_FUNC_WAIT3
If 'wait3' is found and fills in the contents of its third argument
(a 'struct rusage *'), which HP-UX does not do, define
'HAVE_WAIT3'.
These days portable programs should use 'waitpid', not 'wait3', as
'wait3' has been removed from Posix.
-- Macro: AC_GCC_TRADITIONAL
Replaced by 'AC_PROG_GCC_TRADITIONAL' (*note
AC_PROG_GCC_TRADITIONAL::).
-- Macro: AC_GETGROUPS_T
Replaced by 'AC_TYPE_GETGROUPS' (*note AC_TYPE_GETGROUPS::).
-- Macro: AC_GETLOADAVG
Replaced by 'AC_FUNC_GETLOADAVG' (*note AC_FUNC_GETLOADAVG::).
-- Macro: AC_GNU_SOURCE
This macro is a platform-specific subset of
'AC_USE_SYSTEM_EXTENSIONS' (*note AC_USE_SYSTEM_EXTENSIONS::).
-- Macro: AC_HAVE_FUNCS
Replaced by 'AC_CHECK_FUNCS' (*note AC_CHECK_FUNCS::).
-- Macro: AC_HAVE_HEADERS
Replaced by 'AC_CHECK_HEADERS' (*note AC_CHECK_HEADERS::).
-- Macro: AC_HAVE_LIBRARY (LIBRARY, [ACTION-IF-FOUND],
[ACTION-IF-NOT-FOUND], [OTHER-LIBRARIES])
This macro is equivalent to calling 'AC_CHECK_LIB' with a FUNCTION
argument of 'main'. In addition, LIBRARY can be written as any of
'foo', '-lfoo', or 'libfoo.a'. In all of those cases, the compiler
is passed '-lfoo'. However, LIBRARY cannot be a shell variable; it
must be a literal name. *Note AC_CHECK_LIB::.
-- Macro: AC_HAVE_POUNDBANG
Replaced by 'AC_SYS_INTERPRETER' (*note AC_SYS_INTERPRETER::).
-- Macro: AC_HEADER_CHECK
Replaced by 'AC_CHECK_HEADER' (*note AC_CHECK_HEADER::).
-- Macro: AC_HEADER_EGREP
Replaced by 'AC_EGREP_HEADER' (*note AC_EGREP_HEADER::).
-- Macro: AC_HELP_STRING
Replaced by 'AS_HELP_STRING' (*note AS_HELP_STRING::).
-- Macro: AC_INIT (UNIQUE-FILE-IN-SOURCE-DIR)
Formerly 'AC_INIT' used to have a single argument, and was
equivalent to:
AC_INIT
AC_CONFIG_SRCDIR(UNIQUE-FILE-IN-SOURCE-DIR)
See *note AC_INIT:: and *note AC_CONFIG_SRCDIR::.
-- Macro: AC_INLINE
Replaced by 'AC_C_INLINE' (*note AC_C_INLINE::).
-- Macro: AC_INT_16_BITS
If the C type 'int' is 16 bits wide, define 'INT_16_BITS'. Use
'AC_CHECK_SIZEOF(int)' instead (*note AC_CHECK_SIZEOF::).
-- Macro: AC_IRIX_SUN
If on IRIX (Silicon Graphics Unix), add '-lsun' to output 'LIBS'.
If you were using it to get 'getmntent', use 'AC_FUNC_GETMNTENT'
instead. If you used it for the NIS versions of the password and
group functions, use 'AC_CHECK_LIB(sun, getpwnam)'. Up to Autoconf
2.13, it used to be
AC_CHECK_LIB([sun], [getmntent], [LIBS="-lsun $LIBS"])
now it is defined as
AC_FUNC_GETMNTENT
AC_CHECK_LIB([sun], [getpwnam])
See *note AC_FUNC_GETMNTENT:: and *note AC_CHECK_LIB::.
-- Macro: AC_ISC_POSIX
This macro adds '-lcposix' to output variable 'LIBS' if necessary
for Posix facilities. Sun dropped support for the obsolete
INTERACTIVE Systems Corporation Unix on 2006-07-23. New programs
need not use this macro. It is implemented as
'AC_SEARCH_LIBS([strerror], [cposix])' (*note AC_SEARCH_LIBS::).
-- Macro: AC_LANG_C
Same as 'AC_LANG([C])' (*note AC_LANG::).
-- Macro: AC_LANG_CPLUSPLUS
Same as 'AC_LANG([C++])' (*note AC_LANG::).
-- Macro: AC_LANG_FORTRAN77
Same as 'AC_LANG([Fortran 77])' (*note AC_LANG::).
-- Macro: AC_LANG_RESTORE
Select the LANGUAGE that is saved on the top of the stack, as set
by 'AC_LANG_SAVE', remove it from the stack, and call
'AC_LANG(LANGUAGE)'. *Note Language Choice::, for the preferred
way to change languages.
-- Macro: AC_LANG_SAVE
Remember the current language (as set by 'AC_LANG') on a stack.
The current language does not change. 'AC_LANG_PUSH' is preferred
(*note AC_LANG_PUSH::).
-- Macro: AC_LINK_FILES (SOURCE..., DEST...)
This is an obsolete version of 'AC_CONFIG_LINKS' (*note
AC_CONFIG_LINKS::. An updated version of:
AC_LINK_FILES(config/$machine.h config/$obj_format.h,
host.h object.h)
is:
AC_CONFIG_LINKS([host.h:config/$machine.h
object.h:config/$obj_format.h])
-- Macro: AC_LN_S
Replaced by 'AC_PROG_LN_S' (*note AC_PROG_LN_S::).
-- Macro: AC_LONG_64_BITS
Define 'LONG_64_BITS' if the C type 'long int' is 64 bits wide.
Use the generic macro 'AC_CHECK_SIZEOF([long int])' instead (*note
AC_CHECK_SIZEOF::).
-- Macro: AC_LONG_DOUBLE
If the C compiler supports a working 'long double' type with more
range or precision than the 'double' type, define
'HAVE_LONG_DOUBLE'.
You should use 'AC_TYPE_LONG_DOUBLE' or 'AC_TYPE_LONG_DOUBLE_WIDER'
instead. *Note Particular Types::.
-- Macro: AC_LONG_FILE_NAMES
Replaced by
AC_SYS_LONG_FILE_NAMES
*Note AC_SYS_LONG_FILE_NAMES::.
-- Macro: AC_MAJOR_HEADER
Replaced by 'AC_HEADER_MAJOR' (*note AC_HEADER_MAJOR::).
-- Macro: AC_MEMORY_H
Used to define 'NEED_MEMORY_H' if the 'mem' functions were defined
in 'memory.h'. Today it is equivalent to
'AC_CHECK_HEADERS([memory.h])' (*note AC_CHECK_HEADERS::). Adjust
your code to depend upon 'HAVE_MEMORY_H', not 'NEED_MEMORY_H'; see
*note Standard Symbols::.
-- Macro: AC_MINGW32
Similar to 'AC_CYGWIN' but checks for the MinGW compiler
environment and sets 'MINGW32'. Don't use this macro, the
dignified means to check the nature of the host is using
'AC_CANONICAL_HOST' (*note Canonicalizing::).
-- Macro: AC_MINIX
This macro is a platform-specific subset of
'AC_USE_SYSTEM_EXTENSIONS' (*note AC_USE_SYSTEM_EXTENSIONS::).
-- Macro: AC_MINUS_C_MINUS_O
Replaced by 'AC_PROG_CC_C_O' (*note AC_PROG_CC_C_O::).
-- Macro: AC_MMAP
Replaced by 'AC_FUNC_MMAP' (*note AC_FUNC_MMAP::).
-- Macro: AC_MODE_T
Replaced by 'AC_TYPE_MODE_T' (*note AC_TYPE_MODE_T::).
-- Macro: AC_OBJEXT
Defined the output variable 'OBJEXT' based on the output of the
compiler, after .c files have been excluded. Typically set to 'o'
if Posix, 'obj' if a DOS variant. Now the compiler checking macros
handle this automatically.
-- Macro: AC_OBSOLETE (THIS-MACRO-NAME, [SUGGESTION])
Make M4 print a message to the standard error output warning that
THIS-MACRO-NAME is obsolete, and giving the file and line number
where it was called. THIS-MACRO-NAME should be the name of the
macro that is calling 'AC_OBSOLETE'. If SUGGESTION is given, it is
printed at the end of the warning message; for example, it can be a
suggestion for what to use instead of THIS-MACRO-NAME.
For instance
AC_OBSOLETE([$0], [; use AC_CHECK_HEADERS(unistd.h) instead])dnl
You are encouraged to use 'AU_DEFUN' instead, since it gives better
services to the user (*note AU_DEFUN::).
-- Macro: AC_OFF_T
Replaced by 'AC_TYPE_OFF_T' (*note AC_TYPE_OFF_T::).
-- Macro: AC_OUTPUT ([FILE]..., [EXTRA-CMDS], [INIT-CMDS])
The use of 'AC_OUTPUT' with arguments is deprecated. This
obsoleted interface is equivalent to:
AC_CONFIG_FILES(FILE...)
AC_CONFIG_COMMANDS([default],
EXTRA-CMDS, INIT-CMDS)
AC_OUTPUT
See *note AC_CONFIG_FILES::, *note AC_CONFIG_COMMANDS::, and *note
AC_OUTPUT::.
-- Macro: AC_OUTPUT_COMMANDS (EXTRA-CMDS, [INIT-CMDS])
Specify additional shell commands to run at the end of
'config.status', and shell commands to initialize any variables
from 'configure'. This macro may be called multiple times. It is
obsolete, replaced by 'AC_CONFIG_COMMANDS' (*note
AC_CONFIG_COMMANDS::).
Here is an unrealistic example:
fubar=27
AC_OUTPUT_COMMANDS([echo this is extra $fubar, and so on.],
[fubar=$fubar])
AC_OUTPUT_COMMANDS([echo this is another, extra, bit],
[echo init bit])
Aside from the fact that 'AC_CONFIG_COMMANDS' requires an
additional key, an important difference is that
'AC_OUTPUT_COMMANDS' is quoting its arguments twice, unlike
'AC_CONFIG_COMMANDS'. This means that 'AC_CONFIG_COMMANDS' can
safely be given macro calls as arguments:
AC_CONFIG_COMMANDS(foo, [my_FOO()])
Conversely, where one level of quoting was enough for literal
strings with 'AC_OUTPUT_COMMANDS', you need two with
'AC_CONFIG_COMMANDS'. The following lines are equivalent:
AC_OUTPUT_COMMANDS([echo "Square brackets: []"])
AC_CONFIG_COMMANDS([default], [[echo "Square brackets: []"]])
-- Macro: AC_PID_T
Replaced by 'AC_TYPE_PID_T' (*note AC_TYPE_PID_T::).
-- Macro: AC_PREFIX
Replaced by 'AC_PREFIX_PROGRAM' (*note AC_PREFIX_PROGRAM::).
-- Macro: AC_PROGRAMS_CHECK
Replaced by 'AC_CHECK_PROGS' (*note AC_CHECK_PROGS::).
-- Macro: AC_PROGRAMS_PATH
Replaced by 'AC_PATH_PROGS' (*note AC_PATH_PROGS::).
-- Macro: AC_PROGRAM_CHECK
Replaced by 'AC_CHECK_PROG' (*note AC_CHECK_PROG::).
-- Macro: AC_PROGRAM_EGREP
Replaced by 'AC_EGREP_CPP' (*note AC_EGREP_CPP::).
-- Macro: AC_PROGRAM_PATH
Replaced by 'AC_PATH_PROG' (*note AC_PATH_PROG::).
-- Macro: AC_REMOTE_TAPE
Removed because of limited usefulness.
-- Macro: AC_RESTARTABLE_SYSCALLS
This macro was renamed 'AC_SYS_RESTARTABLE_SYSCALLS'. However,
these days portable programs should use 'sigaction' with
'SA_RESTART' if they want restartable system calls. They should
not rely on 'HAVE_RESTARTABLE_SYSCALLS', since nowadays whether a
system call is restartable is a dynamic issue, not a
configuration-time issue.
-- Macro: AC_RETSIGTYPE
Replaced by 'AC_TYPE_SIGNAL' (*note AC_TYPE_SIGNAL::), which itself
is obsolete when assuming C89 or better.
-- Macro: AC_RSH
Removed because of limited usefulness.
-- Macro: AC_SCO_INTL
If on SCO Unix, add '-lintl' to output variable 'LIBS'. This macro
used to do this:
AC_CHECK_LIB([intl], [strftime], [LIBS="-lintl $LIBS"])
Now it just calls 'AC_FUNC_STRFTIME' instead (*note
AC_FUNC_STRFTIME::).
-- Macro: AC_SETVBUF_REVERSED
Replaced by
AC_FUNC_SETVBUF_REVERSED
*Note AC_FUNC_SETVBUF_REVERSED::.
-- Macro: AC_SET_MAKE
Replaced by 'AC_PROG_MAKE_SET' (*note AC_PROG_MAKE_SET::).
-- Macro: AC_SIZEOF_TYPE
Replaced by 'AC_CHECK_SIZEOF' (*note AC_CHECK_SIZEOF::).
-- Macro: AC_SIZE_T
Replaced by 'AC_TYPE_SIZE_T' (*note AC_TYPE_SIZE_T::).
-- Macro: AC_STAT_MACROS_BROKEN
Replaced by 'AC_HEADER_STAT' (*note AC_HEADER_STAT::).
-- Macro: AC_STDC_HEADERS
Replaced by 'AC_HEADER_STDC' (*note AC_HEADER_STDC::).
-- Macro: AC_STRCOLL
Replaced by 'AC_FUNC_STRCOLL' (*note AC_FUNC_STRCOLL::).
-- Macro: AC_STRUCT_ST_BLKSIZE
If 'struct stat' contains an 'st_blksize' member, define
'HAVE_STRUCT_STAT_ST_BLKSIZE'. The former name, 'HAVE_ST_BLKSIZE'
is to be avoided, as its support will cease in the future. This
macro is obsoleted, and should be replaced by
AC_CHECK_MEMBERS([struct stat.st_blksize])
*Note AC_CHECK_MEMBERS::.
-- Macro: AC_STRUCT_ST_RDEV
If 'struct stat' contains an 'st_rdev' member, define
'HAVE_STRUCT_STAT_ST_RDEV'. The former name for this macro,
'HAVE_ST_RDEV', is to be avoided as it will cease to be supported
in the future. Actually, even the new macro is obsolete and should
be replaced by:
AC_CHECK_MEMBERS([struct stat.st_rdev])
*Note AC_CHECK_MEMBERS::.
-- Macro: AC_ST_BLKSIZE
Replaced by 'AC_CHECK_MEMBERS' (*note AC_CHECK_MEMBERS::).
-- Macro: AC_ST_BLOCKS
Replaced by 'AC_STRUCT_ST_BLOCKS' (*note AC_STRUCT_ST_BLOCKS::).
-- Macro: AC_ST_RDEV
Replaced by 'AC_CHECK_MEMBERS' (*note AC_CHECK_MEMBERS::).
-- Macro: AC_SYS_RESTARTABLE_SYSCALLS
If the system automatically restarts a system call that is
interrupted by a signal, define 'HAVE_RESTARTABLE_SYSCALLS'. This
macro does not check whether system calls are restarted in
general--it checks whether a signal handler installed with 'signal'
(but not 'sigaction') causes system calls to be restarted. It does
not check whether system calls can be restarted when interrupted by
signals that have no handler.
These days portable programs should use 'sigaction' with
'SA_RESTART' if they want restartable system calls. They should
not rely on 'HAVE_RESTARTABLE_SYSCALLS', since nowadays whether a
system call is restartable is a dynamic issue, not a
configuration-time issue.
-- Macro: AC_SYS_SIGLIST_DECLARED
This macro was renamed 'AC_DECL_SYS_SIGLIST'. However, even that
name is obsolete, as the same functionality is now achieved via
'AC_CHECK_DECLS' (*note AC_CHECK_DECLS::).
-- Macro: AC_TEST_CPP
This macro was renamed 'AC_TRY_CPP', which in turn was replaced by
'AC_PREPROC_IFELSE' (*note AC_PREPROC_IFELSE::).
-- Macro: AC_TEST_PROGRAM
This macro was renamed 'AC_TRY_RUN', which in turn was replaced by
'AC_RUN_IFELSE' (*note AC_RUN_IFELSE::).
-- Macro: AC_TIMEZONE
Replaced by 'AC_STRUCT_TIMEZONE' (*note AC_STRUCT_TIMEZONE::).
-- Macro: AC_TIME_WITH_SYS_TIME
Replaced by 'AC_HEADER_TIME' (*note AC_HEADER_TIME::).
-- Macro: AC_TRY_COMPILE (INCLUDES, FUNCTION-BODY, [ACTION-IF-TRUE],
[ACTION-IF-FALSE])
Same as:
AC_COMPILE_IFELSE(
[AC_LANG_PROGRAM([[INCLUDES]],
[[FUNCTION-BODY]])],
[ACTION-IF-TRUE],
[ACTION-IF-FALSE])
*Note Running the Compiler::.
This macro double quotes both INCLUDES and FUNCTION-BODY.
For C and C++, INCLUDES is any '#include' statements needed by the
code in FUNCTION-BODY (INCLUDES is ignored if the currently
selected language is Fortran or Fortran 77). The compiler and
compilation flags are determined by the current language (*note
Language Choice::).
-- Macro: AC_TRY_CPP (INPUT, [ACTION-IF-TRUE], [ACTION-IF-FALSE])
Same as:
AC_PREPROC_IFELSE(
[AC_LANG_SOURCE([[INPUT]])],
[ACTION-IF-TRUE],
[ACTION-IF-FALSE])
*Note Running the Preprocessor::.
This macro double quotes the INPUT.
-- Macro: AC_TRY_LINK (INCLUDES, FUNCTION-BODY, [ACTION-IF-TRUE],
[ACTION-IF-FALSE])
Same as:
AC_LINK_IFELSE(
[AC_LANG_PROGRAM([[INCLUDES]],
[[FUNCTION-BODY]])],
[ACTION-IF-TRUE],
[ACTION-IF-FALSE])
*Note Running the Compiler::.
This macro double quotes both INCLUDES and FUNCTION-BODY.
Depending on the current language (*note Language Choice::), create
a test program to see whether a function whose body consists of
FUNCTION-BODY can be compiled and linked. If the file compiles and
links successfully, run shell commands ACTION-IF-FOUND, otherwise
run ACTION-IF-NOT-FOUND.
This macro double quotes both INCLUDES and FUNCTION-BODY.
For C and C++, INCLUDES is any '#include' statements needed by the
code in FUNCTION-BODY (INCLUDES is ignored if the currently
selected language is Fortran or Fortran 77). The compiler and
compilation flags are determined by the current language (*note
Language Choice::), and in addition 'LDFLAGS' and 'LIBS' are used
for linking.
-- Macro: AC_TRY_LINK_FUNC (FUNCTION, [ACTION-IF-FOUND],
[ACTION-IF-NOT-FOUND])
This macro is equivalent to
AC_LINK_IFELSE([AC_LANG_CALL([], [FUNCTION])],
[ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
*Note AC_LINK_IFELSE::.
-- Macro: AC_TRY_RUN (PROGRAM, [ACTION-IF-TRUE], [ACTION-IF-FALSE],
[ACTION-IF-CROSS-COMPILING = AC_MSG_FAILURE])
Same as:
AC_RUN_IFELSE(
[AC_LANG_SOURCE([[PROGRAM]])],
[ACTION-IF-TRUE],
[ACTION-IF-FALSE],
[ACTION-IF-CROSS-COMPILING])
*Note Runtime::.
-- Macro: AC_TYPE_SIGNAL
If 'signal.h' declares 'signal' as returning a pointer to a
function returning 'void', define 'RETSIGTYPE' to be 'void';
otherwise, define it to be 'int'. These days, it is portable to
assume C89, and that signal handlers return 'void', without needing
to use this macro or 'RETSIGTYPE'.
When targeting older K&R C, it is possible to define signal
handlers as returning type 'RETSIGTYPE', and omit a return
statement:
RETSIGTYPE
hup_handler ()
{
...
}
-- Macro: AC_UID_T
Replaced by 'AC_TYPE_UID_T' (*note AC_TYPE_UID_T::).
-- Macro: AC_UNISTD_H
Same as 'AC_CHECK_HEADERS([unistd.h])' (*note AC_CHECK_HEADERS::).
-- Macro: AC_USG
Define 'USG' if the BSD string functions are defined in
'strings.h'. You should no longer depend upon 'USG', but on
'HAVE_STRING_H'; see *note Standard Symbols::.
-- Macro: AC_UTIME_NULL
Replaced by 'AC_FUNC_UTIME_NULL' (*note AC_FUNC_UTIME_NULL::).
-- Macro: AC_VALIDATE_CACHED_SYSTEM_TUPLE ([CMD])
If the cache file is inconsistent with the current host, target and
build system types, it used to execute CMD or print a default error
message. This is now handled by default.
-- Macro: AC_VERBOSE (RESULT-DESCRIPTION)
Replaced by 'AC_MSG_RESULT' (*note AC_MSG_RESULT::).
-- Macro: AC_VFORK
Replaced by 'AC_FUNC_FORK' (*note AC_FUNC_FORK::).
-- Macro: AC_VPRINTF
Replaced by 'AC_FUNC_VPRINTF' (*note AC_FUNC_VPRINTF::).
-- Macro: AC_WAIT3
This macro was renamed 'AC_FUNC_WAIT3'. However, these days
portable programs should use 'waitpid', not 'wait3', as 'wait3' has
been removed from Posix.
-- Macro: AC_WARN
Replaced by 'AC_MSG_WARN' (*note AC_MSG_WARN::).
-- Macro: AC_WITH (PACKAGE, ACTION-IF-GIVEN, [ACTION-IF-NOT-GIVEN])
This is an obsolete version of 'AC_ARG_WITH' that does not support
providing a help string (*note AC_ARG_WITH::).
-- Macro: AC_WORDS_BIGENDIAN
Replaced by 'AC_C_BIGENDIAN' (*note AC_C_BIGENDIAN::).
-- Macro: AC_XENIX_DIR
This macro used to add '-lx' to output variable 'LIBS' if on Xenix.
Also, if 'dirent.h' is being checked for, added '-ldir' to 'LIBS'.
Now it is merely an alias of 'AC_HEADER_DIRENT' instead, plus some
code to detect whether running XENIX on which you should not
depend:
AC_MSG_CHECKING([for Xenix])
AC_EGREP_CPP([yes],
[#if defined M_XENIX && !defined M_UNIX
yes
#endif],
[AC_MSG_RESULT([yes]); XENIX=yes],
[AC_MSG_RESULT([no]); XENIX=])
Don't use this macro, the dignified means to check the nature of
the host is using 'AC_CANONICAL_HOST' (*note Canonicalizing::).
-- Macro: AC_YYTEXT_POINTER
This macro was renamed 'AC_DECL_YYTEXT', which in turn was
integrated into 'AC_PROG_LEX' (*note AC_PROG_LEX::).
File: autoconf.info, Node: Autoconf 1, Next: Autoconf 2.13, Prev: Obsolete Macros, Up: Obsolete Constructs
18.5 Upgrading From Version 1
=============================
Autoconf version 2 is mostly backward compatible with version 1.
However, it introduces better ways to do some things, and doesn't
support some of the ugly things in version 1. So, depending on how
sophisticated your 'configure.ac' files are, you might have to do some
manual work in order to upgrade to version 2. This chapter points out
some problems to watch for when upgrading. Also, perhaps your
'configure' scripts could benefit from some of the new features in
version 2; the changes are summarized in the file 'NEWS' in the Autoconf
distribution.
* Menu:
* Changed File Names:: Files you might rename
* Changed Makefiles:: New things to put in 'Makefile.in'
* Changed Macros:: Macro calls you might replace
* Changed Results:: Changes in how to check test results
* Changed Macro Writing:: Better ways to write your own macros
File: autoconf.info, Node: Changed File Names, Next: Changed Makefiles, Up: Autoconf 1
18.5.1 Changed File Names
-------------------------
If you have an 'aclocal.m4' installed with Autoconf (as opposed to in a
particular package's source directory), you must rename it to
'acsite.m4'. *Note autoconf Invocation::.
If you distribute 'install.sh' with your package, rename it to
'install-sh' so 'make' builtin rules don't inadvertently create a file
called 'install' from it. 'AC_PROG_INSTALL' looks for the script under
both names, but it is best to use the new name.
If you were using 'config.h.top', 'config.h.bot', or 'acconfig.h',
you still can, but you have less clutter if you use the 'AH_' macros.
*Note Autoheader Macros::.
File: autoconf.info, Node: Changed Makefiles, Next: Changed Macros, Prev: Changed File Names, Up: Autoconf 1
18.5.2 Changed Makefiles
------------------------
Add '@CFLAGS@', '@CPPFLAGS@', and '@LDFLAGS@' in your 'Makefile.in'
files, so they can take advantage of the values of those variables in
the environment when 'configure' is run. Doing this isn't necessary,
but it's a convenience for users.
Also add '@configure_input@' in a comment to each input file for
'AC_OUTPUT', so that the output files contain a comment saying they were
produced by 'configure'. Automatically selecting the right comment
syntax for all the kinds of files that people call 'AC_OUTPUT' on became
too much work.
Add 'config.log' and 'config.cache' to the list of files you remove
in 'distclean' targets.
If you have the following in 'Makefile.in':
prefix = /usr/local
exec_prefix = $(prefix)
you must change it to:
prefix = @prefix@
exec_prefix = @exec_prefix@
The old behavior of replacing those variables without '@' characters
around them has been removed.
File: autoconf.info, Node: Changed Macros, Next: Changed Results, Prev: Changed Makefiles, Up: Autoconf 1
18.5.3 Changed Macros
---------------------
Many of the macros were renamed in Autoconf version 2. You can still
use the old names, but the new ones are clearer, and it's easier to find
the documentation for them. *Note Obsolete Macros::, for a table
showing the new names for the old macros. Use the 'autoupdate' program
to convert your 'configure.ac' to using the new macro names. *Note
autoupdate Invocation::.
Some macros have been superseded by similar ones that do the job
better, but are not call-compatible. If you get warnings about calling
obsolete macros while running 'autoconf', you may safely ignore them,
but your 'configure' script generally works better if you follow the
advice that is printed about what to replace the obsolete macros with.
In particular, the mechanism for reporting the results of tests has
changed. If you were using 'echo' or 'AC_VERBOSE' (perhaps via
'AC_COMPILE_CHECK'), your 'configure' script's output looks better if
you switch to 'AC_MSG_CHECKING' and 'AC_MSG_RESULT'. *Note Printing
Messages::. Those macros work best in conjunction with cache variables.
*Note Caching Results::.
File: autoconf.info, Node: Changed Results, Next: Changed Macro Writing, Prev: Changed Macros, Up: Autoconf 1
18.5.4 Changed Results
----------------------
If you were checking the results of previous tests by examining the
shell variable 'DEFS', you need to switch to checking the values of the
cache variables for those tests. 'DEFS' no longer exists while
'configure' is running; it is only created when generating output files.
This difference from version 1 is because properly quoting the contents
of that variable turned out to be too cumbersome and inefficient to do
every time 'AC_DEFINE' is called. *Note Cache Variable Names::.
For example, here is a 'configure.ac' fragment written for Autoconf
version 1:
AC_HAVE_FUNCS(syslog)
case "$DEFS" in
*-DHAVE_SYSLOG*) ;;
*) # syslog is not in the default libraries. See if it's in some other.
saved_LIBS="$LIBS"
for lib in bsd socket inet; do
AC_CHECKING(for syslog in -l$lib)
LIBS="-l$lib $saved_LIBS"
AC_HAVE_FUNCS(syslog)
case "$DEFS" in
*-DHAVE_SYSLOG*) break ;;
*) ;;
esac
LIBS="$saved_LIBS"
done ;;
esac
Here is a way to write it for version 2:
AC_CHECK_FUNCS([syslog])
if test "x$ac_cv_func_syslog" = xno; then
# syslog is not in the default libraries. See if it's in some other.
for lib in bsd socket inet; do
AC_CHECK_LIB([$lib], [syslog], [AC_DEFINE([HAVE_SYSLOG])
LIBS="-l$lib $LIBS"; break])
done
fi
If you were working around bugs in 'AC_DEFINE_UNQUOTED' by adding
backslashes before quotes, you need to remove them. It now works
predictably, and does not treat quotes (except back quotes) specially.
*Note Setting Output Variables::.
All of the Boolean shell variables set by Autoconf macros now use
'yes' for the true value. Most of them use 'no' for false, though for
backward compatibility some use the empty string instead. If you were
relying on a shell variable being set to something like 1 or 't' for
true, you need to change your tests.
File: autoconf.info, Node: Changed Macro Writing, Prev: Changed Results, Up: Autoconf 1
18.5.5 Changed Macro Writing
----------------------------
When defining your own macros, you should now use 'AC_DEFUN' instead of
'define'. 'AC_DEFUN' automatically calls 'AC_PROVIDE' and ensures that
macros called via 'AC_REQUIRE' do not interrupt other macros, to prevent
nested 'checking...' messages on the screen. There's no actual harm in
continuing to use the older way, but it's less convenient and
attractive. *Note Macro Definitions::.
You probably looked at the macros that came with Autoconf as a guide
for how to do things. It would be a good idea to take a look at the new
versions of them, as the style is somewhat improved and they take
advantage of some new features.
If you were doing tricky things with undocumented Autoconf internals
(macros, variables, diversions), check whether you need to change
anything to account for changes that have been made. Perhaps you can
even use an officially supported technique in version 2 instead of
kludging. Or perhaps not.
To speed up your locally written feature tests, add caching to them.
See whether any of your tests are of general enough usefulness to
encapsulate them into macros that you can share.
File: autoconf.info, Node: Autoconf 2.13, Prev: Autoconf 1, Up: Obsolete Constructs
18.6 Upgrading From Version 2.13
================================
The introduction of the previous section (*note Autoconf 1::) perfectly
suits this section...
Autoconf version 2.50 is mostly backward compatible with version
2.13. However, it introduces better ways to do some things, and
doesn't support some of the ugly things in version 2.13. So,
depending on how sophisticated your 'configure.ac' files are, you
might have to do some manual work in order to upgrade to version
2.50. This chapter points out some problems to watch for when
upgrading. Also, perhaps your 'configure' scripts could benefit
from some of the new features in version 2.50; the changes are
summarized in the file 'NEWS' in the Autoconf distribution.
* Menu:
* Changed Quotation:: Broken code which used to work
* New Macros:: Interaction with foreign macros
* Hosts and Cross-Compilation:: Bugward compatibility kludges
* AC_LIBOBJ vs LIBOBJS:: LIBOBJS is a forbidden token
* AC_ACT_IFELSE vs AC_TRY_ACT:: A more generic scheme for testing sources
File: autoconf.info, Node: Changed Quotation, Next: New Macros, Up: Autoconf 2.13
18.6.1 Changed Quotation
------------------------
The most important changes are invisible to you: the implementation of
most macros have completely changed. This allowed more factorization of
the code, better error messages, a higher uniformity of the user's
interface etc. Unfortunately, as a side effect, some construct which
used to (miraculously) work might break starting with Autoconf 2.50.
The most common culprit is bad quotation.
For instance, in the following example, the message is not properly
quoted:
AC_INIT
AC_CHECK_HEADERS(foo.h, ,
AC_MSG_ERROR(cannot find foo.h, bailing out))
AC_OUTPUT
Autoconf 2.13 simply ignores it:
$ autoconf-2.13; ./configure --silent
creating cache ./config.cache
configure: error: cannot find foo.h
$
while Autoconf 2.50 produces a broken 'configure':
$ autoconf-2.50; ./configure --silent
configure: error: cannot find foo.h
./configure: exit: bad non-numeric arg `bailing'
./configure: exit: bad non-numeric arg `bailing'
$
The message needs to be quoted, and the 'AC_MSG_ERROR' invocation
too!
AC_INIT([Example], [1.0], [bug-example@example.org])
AC_CHECK_HEADERS([foo.h], [],
[AC_MSG_ERROR([cannot find foo.h, bailing out])])
AC_OUTPUT
Many many (and many more) Autoconf macros were lacking proper
quotation, including no less than... 'AC_DEFUN' itself!
$ cat configure.in
AC_DEFUN([AC_PROG_INSTALL],
[# My own much better version
])
AC_INIT
AC_PROG_INSTALL
AC_OUTPUT
$ autoconf-2.13
autoconf: Undefined macros:
***BUG in Autoconf--please report*** AC_FD_MSG
***BUG in Autoconf--please report*** AC_EPI
configure.in:1:AC_DEFUN([AC_PROG_INSTALL],
configure.in:5:AC_PROG_INSTALL
$ autoconf-2.50
$
File: autoconf.info, Node: New Macros, Next: Hosts and Cross-Compilation, Prev: Changed Quotation, Up: Autoconf 2.13
18.6.2 New Macros
-----------------
While Autoconf was relatively dormant in the late 1990s, Automake
provided Autoconf-like macros for a while. Starting with Autoconf 2.50
in 2001, Autoconf provided versions of these macros, integrated in the
'AC_' namespace, instead of 'AM_'. But in order to ease the upgrading
via 'autoupdate', bindings to such 'AM_' macros are provided.
Unfortunately older versions of Automake (e.g., Automake 1.4) did not
quote the names of these macros. Therefore, when 'm4' finds something
like 'AC_DEFUN(AM_TYPE_PTRDIFF_T, ...)' in 'aclocal.m4',
'AM_TYPE_PTRDIFF_T' is expanded, replaced with its Autoconf definition.
Fortunately Autoconf catches pre-'AC_INIT' expansions, and complains,
in its own words:
$ cat configure.ac
AC_INIT([Example], [1.0], [bug-example@example.org])
AM_TYPE_PTRDIFF_T
$ aclocal-1.4
$ autoconf
aclocal.m4:17: error: m4_defn: undefined macro: _m4_divert_diversion
aclocal.m4:17: the top level
autom4te: m4 failed with exit status: 1
$
Modern versions of Automake no longer define most of these macros,
and properly quote the names of the remaining macros. If you must use
an old Automake, do not depend upon macros from Automake as it is simply
not its job to provide macros (but the one it requires itself):
$ cat configure.ac
AC_INIT([Example], [1.0], [bug-example@example.org])
AM_TYPE_PTRDIFF_T
$ rm aclocal.m4
$ autoupdate
autoupdate: `configure.ac' is updated
$ cat configure.ac
AC_INIT([Example], [1.0], [bug-example@example.org])
AC_CHECK_TYPES([ptrdiff_t])
$ aclocal-1.4
$ autoconf
$
File: autoconf.info, Node: Hosts and Cross-Compilation, Next: AC_LIBOBJ vs LIBOBJS, Prev: New Macros, Up: Autoconf 2.13
18.6.3 Hosts and Cross-Compilation
----------------------------------
Based on the experience of compiler writers, and after long public
debates, many aspects of the cross-compilation chain have changed:
- the relationship between the build, host, and target architecture
types,
- the command line interface for specifying them to 'configure',
- the variables defined in 'configure',
- the enabling of cross-compilation mode.
The relationship between build, host, and target have been cleaned
up: the chain of default is now simply: target defaults to host, host to
build, and build to the result of 'config.guess'. Nevertheless, in
order to ease the transition from 2.13 to 2.50, the following transition
scheme is implemented. _Do not rely on it_, as it will be completely
disabled in a couple of releases (we cannot keep it, as it proves to
cause more problems than it cures).
They all default to the result of running 'config.guess', unless you
specify either '--build' or '--host'. In this case, the default becomes
the system type you specified. If you specify both, and they're
different, 'configure' enters cross compilation mode, so it doesn't run
any tests that require execution.
Hint: if you mean to override the result of 'config.guess', prefer
'--build' over '--host'.
For backward compatibility, 'configure' accepts a system type as an
option by itself. Such an option overrides the defaults for build,
host, and target system types. The following configure statement
configures a cross toolchain that runs on NetBSD/alpha but generates
code for GNU Hurd/sparc, which is also the build platform.
./configure --host=alpha-netbsd sparc-gnu
In Autoconf 2.13 and before, the variables 'build', 'host', and
'target' had a different semantics before and after the invocation of
'AC_CANONICAL_BUILD' etc. Now, the argument of '--build' is strictly
copied into 'build_alias', and is left empty otherwise. After the
'AC_CANONICAL_BUILD', 'build' is set to the canonicalized build type.
To ease the transition, before, its contents is the same as that of
'build_alias'. Do _not_ rely on this broken feature.
For consistency with the backward compatibility scheme exposed above,
when '--host' is specified but '--build' isn't, the build system is
assumed to be the same as '--host', and 'build_alias' is set to that
value. Eventually, this historically incorrect behavior will go away.
The former scheme to enable cross-compilation proved to cause more
harm than good, in particular, it used to be triggered too easily,
leaving regular end users puzzled in front of cryptic error messages.
'configure' could even enter cross-compilation mode only because the
compiler was not functional. This is mainly because 'configure' used to
try to detect cross-compilation, instead of waiting for an explicit flag
from the user.
Now, 'configure' enters cross-compilation mode if and only if
'--host' is passed.
That's the short documentation. To ease the transition between 2.13
and its successors, a more complicated scheme is implemented. _Do not
rely on the following_, as it will be removed in the near future.
If you specify '--host', but not '--build', when 'configure' performs
the first compiler test it tries to run an executable produced by the
compiler. If the execution fails, it enters cross-compilation mode.
This is fragile. Moreover, by the time the compiler test is performed,
it may be too late to modify the build-system type: other tests may have
already been performed. Therefore, whenever you specify '--host', be
sure to specify '--build' too.
./configure --build=i686-pc-linux-gnu --host=m68k-coff
enters cross-compilation mode. The former interface, which consisted in
setting the compiler to a cross-compiler without informing 'configure'
is obsolete. For instance, 'configure' fails if it can't run the code
generated by the specified compiler if you configure as follows:
./configure CC=m68k-coff-gcc
File: autoconf.info, Node: AC_LIBOBJ vs LIBOBJS, Next: AC_ACT_IFELSE vs AC_TRY_ACT, Prev: Hosts and Cross-Compilation, Up: Autoconf 2.13
18.6.4 'AC_LIBOBJ' vs. 'LIBOBJS'
--------------------------------
Up to Autoconf 2.13, the replacement of functions was triggered via the
variable 'LIBOBJS'. Since Autoconf 2.50, the macro 'AC_LIBOBJ' should
be used instead (*note Generic Functions::). Starting at Autoconf 2.53,
the use of 'LIBOBJS' is an error.
This change is mandated by the unification of the GNU Build System
components. In particular, the various fragile techniques used to parse
a 'configure.ac' are all replaced with the use of traces. As a
consequence, any action must be traceable, which obsoletes critical
variable assignments. Fortunately, 'LIBOBJS' was the only problem, and
it can even be handled gracefully (read, "without your having to change
something").
There were two typical uses of 'LIBOBJS': asking for a replacement
function, and adjusting 'LIBOBJS' for Automake and/or Libtool.
As for function replacement, the fix is immediate: use 'AC_LIBOBJ'.
For instance:
LIBOBJS="$LIBOBJS fnmatch.o"
LIBOBJS="$LIBOBJS malloc.$ac_objext"
should be replaced with:
AC_LIBOBJ([fnmatch])
AC_LIBOBJ([malloc])
When used with Automake 1.10 or newer, a suitable value for
'LIBOBJDIR' is set so that the 'LIBOBJS' and 'LTLIBOBJS' can be
referenced from any 'Makefile.am'. Even without Automake, arranging for
'LIBOBJDIR' to be set correctly enables referencing 'LIBOBJS' and
'LTLIBOBJS' in another directory. The 'LIBOBJDIR' feature is
experimental.
File: autoconf.info, Node: AC_ACT_IFELSE vs AC_TRY_ACT, Prev: AC_LIBOBJ vs LIBOBJS, Up: Autoconf 2.13
18.6.5 'AC_ACT_IFELSE' vs. 'AC_TRY_ACT'
---------------------------------------
Since Autoconf 2.50, internal codes uses 'AC_PREPROC_IFELSE',
'AC_COMPILE_IFELSE', 'AC_LINK_IFELSE', and 'AC_RUN_IFELSE' on one hand
and 'AC_LANG_SOURCE', and 'AC_LANG_PROGRAM' on the other hand instead of
the deprecated 'AC_TRY_CPP', 'AC_TRY_COMPILE', 'AC_TRY_LINK', and
'AC_TRY_RUN'. The motivations where:
- a more consistent interface: 'AC_TRY_COMPILE' etc. were double
quoting their arguments;
- the combinatoric explosion is solved by decomposing on the one hand
the generation of sources, and on the other hand executing the
program;
- this scheme helps supporting more languages than plain C and C++.
In addition to the change of syntax, the philosophy has changed too:
while emphasis was put on speed at the expense of accuracy, today's
Autoconf promotes accuracy of the testing framework at, ahem..., the
expense of speed.
As a perfect example of what is _not_ to be done, here is how to find
out whether a header file contains a particular declaration, such as a
typedef, a structure, a structure member, or a function. Use
'AC_EGREP_HEADER' instead of running 'grep' directly on the header file;
on some systems the symbol might be defined in another header file that
the file you are checking includes.
As a (bad) example, here is how you should not check for C
preprocessor symbols, either defined by header files or predefined by
the C preprocessor: using 'AC_EGREP_CPP':
AC_EGREP_CPP(yes,
[#ifdef _AIX
yes
#endif
], is_aix=yes, is_aix=no)
The above example, properly written would (i) use 'AC_LANG_PROGRAM',
and (ii) run the compiler:
AC_COMPILE_IFELSE([AC_LANG_PROGRAM(
[[#ifndef _AIX
error: This isn't AIX!
#endif
]])],
[is_aix=yes],
[is_aix=no])
File: autoconf.info, Node: Using Autotest, Next: FAQ, Prev: Obsolete Constructs, Up: Top
19 Generating Test Suites with Autotest
***************************************
*N.B.: This section describes a feature which is still
stabilizing. Although we believe that Autotest is useful as-is, this
documentation describes an interface which might change in the future:
do not depend upon Autotest without subscribing to the Autoconf mailing
lists.*
It is paradoxical that portable projects depend on nonportable tools
to run their test suite. Autoconf by itself is the paragon of this
problem: although it aims at perfectly portability, up to 2.13 its test
suite was using DejaGNU, a rich and complex testing framework, but which
is far from being standard on Posix systems. Worse yet, it was likely
to be missing on the most fragile platforms, the very platforms that are
most likely to torture Autoconf and exhibit deficiencies.
To circumvent this problem, many package maintainers have developed
their own testing framework, based on simple shell scripts whose sole
outputs are exit status values describing whether the test succeeded.
Most of these tests share common patterns, and this can result in lots
of duplicated code and tedious maintenance.
Following exactly the same reasoning that yielded to the inception of
Autoconf, Autotest provides a test suite generation framework, based on
M4 macros building a portable shell script. The suite itself is
equipped with automatic logging and tracing facilities which greatly
diminish the interaction with bug reporters, and simple timing reports.
Autoconf itself has been using Autotest for years, and we do attest
that it has considerably improved the strength of the test suite and the
quality of bug reports. Other projects are known to use some generation
of Autotest, such as Bison, Free Recode, Free Wdiff, GNU Tar, each of
them with different needs, and this usage has validated Autotest as a
general testing framework.
Nonetheless, compared to DejaGNU, Autotest is inadequate for
interactive tool testing, which is probably its main limitation.
* Menu:
* Using an Autotest Test Suite:: Autotest and the user
* Writing Testsuites:: Autotest macros
* testsuite Invocation:: Running 'testsuite' scripts
* Making testsuite Scripts:: Using autom4te to create 'testsuite'
File: autoconf.info, Node: Using an Autotest Test Suite, Next: Writing Testsuites, Up: Using Autotest
19.1 Using an Autotest Test Suite
=================================
* Menu:
* testsuite Scripts:: The concepts of Autotest
* Autotest Logs:: Their contents
File: autoconf.info, Node: testsuite Scripts, Next: Autotest Logs, Up: Using an Autotest Test Suite
19.1.1 'testsuite' Scripts
--------------------------
Generating testing or validation suites using Autotest is rather easy.
The whole validation suite is held in a file to be processed through
'autom4te', itself using GNU M4 under the hood, to produce a stand-alone
Bourne shell script which then gets distributed. Neither 'autom4te' nor
GNU M4 are needed at the installer's end.
Each test of the validation suite should be part of some test group.
A "test group" is a sequence of interwoven tests that ought to be
executed together, usually because one test in the group creates data
files that a later test in the same group needs to read. Complex test
groups make later debugging more tedious. It is much better to keep
only a few tests per test group. Ideally there is only one test per
test group.
For all but the simplest packages, some file such as 'testsuite.at'
does not fully hold all test sources, as these are often easier to
maintain in separate files. Each of these separate files holds a single
test group, or a sequence of test groups all addressing some common
functionality in the package. In such cases, 'testsuite.at' merely
initializes the validation suite, and sometimes does elementary health
checking, before listing include statements for all other test files.
The special file 'package.m4', containing the identification of the
package, is automatically included if found.
A convenient alternative consists in moving all the global issues
(local Autotest macros, elementary health checking, and 'AT_INIT'
invocation) into the file 'local.at', and making 'testsuite.at' be a
simple list of 'm4_include's of sub test suites. In such case,
generating the whole test suite or pieces of it is only a matter of
choosing the 'autom4te' command line arguments.
The validation scripts that Autotest produces are by convention
called 'testsuite'. When run, 'testsuite' executes each test group in
turn, producing only one summary line per test to say if that particular
test succeeded or failed. At end of all tests, summarizing counters get
printed. One debugging directory is left for each test group which
failed, if any: such directories are named 'testsuite.dir/NN', where NN
is the sequence number of the test group, and they include:
* a debugging script named 'run' which reruns the test in "debug
mode" (*note testsuite Invocation::). The automatic generation of
debugging scripts has the purpose of easing the chase for bugs.
* all the files created with 'AT_DATA'
* all the Erlang source code files created with 'AT_CHECK_EUNIT'
* a log of the run, named 'testsuite.log'
In the ideal situation, none of the tests fail, and consequently no
debugging directory is left behind for validation.
It often happens in practice that individual tests in the validation
suite need to get information coming out of the configuration process.
Some of this information, common for all validation suites, is provided
through the file 'atconfig', automatically created by
'AC_CONFIG_TESTDIR'. For configuration information which your testing
environment specifically needs, you might prepare an optional file named
'atlocal.in', instantiated by 'AC_CONFIG_FILES'. The configuration
process produces 'atconfig' and 'atlocal' out of these two input files,
and these two produced files are automatically read by the 'testsuite'
script.
Here is a diagram showing the relationship between files.
Files used in preparing a software package for distribution:
[package.m4] -->.
\
subfile-1.at ->. [local.at] ---->+
... \ \
subfile-i.at ---->-- testsuite.at -->-- autom4te* -->testsuite
... /
subfile-n.at ->'
Files used in configuring a software package:
.--> atconfig
/
[atlocal.in] --> config.status* --<
\
`--> [atlocal]
Files created during test suite execution:
atconfig -->. .--> testsuite.log
\ /
>-- testsuite* --<
/ \
[atlocal] ->' `--> [testsuite.dir]
File: autoconf.info, Node: Autotest Logs, Prev: testsuite Scripts, Up: Using an Autotest Test Suite
19.1.2 Autotest Logs
--------------------
When run, the test suite creates a log file named after itself, e.g., a
test suite named 'testsuite' creates 'testsuite.log'. It contains a lot
of information, usually more than maintainers actually need, but
therefore most of the time it contains all that is needed:
command line arguments
A bad but unfortunately widespread habit consists of setting
environment variables before the command, such as in
'CC=my-home-grown-cc ./testsuite'. The test suite does not know
this change, hence (i) it cannot report it to you, and (ii) it
cannot preserve the value of 'CC' for subsequent runs. Autoconf
faced exactly the same problem, and solved it by asking users to
pass the variable definitions as command line arguments. Autotest
requires this rule, too, but has no means to enforce it; the log
then contains a trace of the variables that were changed by the
user.
'ChangeLog' excerpts
The topmost lines of all the 'ChangeLog' files found in the source
hierarchy. This is especially useful when bugs are reported
against development versions of the package, since the version
string does not provide sufficient information to know the exact
state of the sources the user compiled. Of course, this relies on
the use of a 'ChangeLog'.
build machine
Running a test suite in a cross-compile environment is not an easy
task, since it would mean having the test suite run on a machine
BUILD, while running programs on a machine HOST. It is much
simpler to run both the test suite and the programs on HOST, but
then, from the point of view of the test suite, there remains a
single environment, HOST = BUILD. The log contains relevant
information on the state of the BUILD machine, including some
important environment variables.
tested programs
The absolute file name and answers to '--version' of the tested
programs (see *note Writing Testsuites::, 'AT_TESTED').
configuration log
The contents of 'config.log', as created by 'configure', are
appended. It contains the configuration flags and a detailed
report on the configuration itself.
File: autoconf.info, Node: Writing Testsuites, Next: testsuite Invocation, Prev: Using an Autotest Test Suite, Up: Using Autotest
19.2 Writing 'testsuite.at'
===========================
The 'testsuite.at' is a Bourne shell script making use of special
Autotest M4 macros. It often contains a call to 'AT_INIT' near its
beginning followed by one call to 'm4_include' per source file for
tests. Each such included file, or the remainder of 'testsuite.at' if
include files are not used, contain a sequence of test groups. Each
test group begins with a call to 'AT_SETUP', then an arbitrary number of
shell commands or calls to 'AT_CHECK', and then completes with a call to
'AT_CLEANUP'. Multiple test groups can be categorized by a call to
'AT_BANNER'.
All of the public Autotest macros have all-uppercase names in the
namespace '^AT_' to prevent them from accidentally conflicting with
other text; Autoconf also reserves the namespace '^_AT_' for internal
macros. All shell variables used in the testsuite for internal purposes
have mostly-lowercase names starting with 'at_'. Autotest also uses
here-document delimiters in the namespace '^_AT[A-Z]', and makes use of
the file system namespace '^at-'.
Since Autoconf is built on top of M4sugar (*note Programming in
M4sugar::) and M4sh (*note Programming in M4sh::), you must also be
aware of those namespaces ('^_?\(m4\|AS\)_'). In general, you _should
not use_ the namespace of a package that does not own the macro or shell
code you are writing.
-- Macro: AT_INIT ([NAME])
Initialize Autotest. Giving a NAME to the test suite is encouraged
if your package includes several test suites. Before this macro is
called, 'AT_PACKAGE_STRING' and 'AT_PACKAGE_BUGREPORT' must be
defined, which are used to display information about the testsuite
to the user. Typically, these macros are provided by a file
'package.m4' built by 'make' (*note Making testsuite Scripts::), in
order to inherit the package name, version, and bug reporting
address from 'configure.ac'.
-- Macro: AT_COPYRIGHT (COPYRIGHT-NOTICE)
State that, in addition to the Free Software Foundation's copyright
on the Autotest macros, parts of your test suite are covered by
COPYRIGHT-NOTICE.
The COPYRIGHT-NOTICE shows up in both the head of 'testsuite' and
in 'testsuite --version'.
-- Macro: AT_ARG_OPTION (OPTIONS, HELP-TEXT, [ACTION-IF-GIVEN],
[ACTION-IF-NOT-GIVEN])
Accept options from the space-separated list OPTIONS, a list that
has leading dashes removed from the options. Long options will be
prefixed with '--', single-character options with '-'. The first
word in this list is the primary OPTION, any others are assumed to
be short-hand aliases. The variable associated with it is
'at_arg_OPTION', with any dashes in OPTION replaced with
underscores.
If the user passes '--OPTION' to the 'testsuite', the variable will
be set to ':'. If the user does not pass the option, or passes
'--no-OPTION', then the variable will be set to 'false'.
ACTION-IF-GIVEN is run each time the option is encountered; here,
the variable 'at_optarg' will be set to ':' or 'false' as
appropriate. 'at_optarg' is actually just a copy of
'at_arg_OPTION'.
ACTION-IF-NOT-GIVEN will be run once after option parsing is
complete and if no option from OPTIONS was used.
HELP-TEXT is added to the end of the list of options shown in
'testsuite --help' (*note AS_HELP_STRING::).
It is recommended that you use a package-specific prefix to OPTIONS
names in order to avoid clashes with future Autotest built-in
options.
-- Macro: AT_ARG_OPTION_ARG (OPTIONS, HELP-TEXT, [ACTION-IF-GIVEN],
[ACTION-IF-NOT-GIVEN])
Accept options with arguments from the space-separated list
OPTIONS, a list that has leading dashes removed from the options.
Long options will be prefixed with '--', single-character options
with '-'. The first word in this list is the primary OPTION, any
others are assumed to be short-hand aliases. The variable
associated with it is 'at_arg_OPTION', with any dashes in OPTION
replaced with underscores.
If the user passes '--OPTION=ARG' or '--OPTION ARG' to the
'testsuite', the variable will be set to 'ARG'.
ACTION-IF-GIVEN is run each time the option is encountered; here,
the variable 'at_optarg' will be set to 'ARG'. 'at_optarg' is
actually just a copy of 'at_arg_OPTION'.
ACTION-IF-NOT-GIVEN will be run once after option parsing is
complete and if no option from OPTIONS was used.
HELP-TEXT is added to the end of the list of options shown in
'testsuite --help' (*note AS_HELP_STRING::).
It is recommended that you use a package-specific prefix to OPTIONS
names in order to avoid clashes with future Autotest built-in
options.
-- Macro: AT_COLOR_TESTS
Enable colored test results by default when the output is connected
to a terminal.
-- Macro: AT_TESTED (EXECUTABLES)
Log the file name and answer to '--version' of each program in
space-separated list EXECUTABLES. Several invocations register new
executables, in other words, don't fear registering one program
several times.
Autotest test suites rely on 'PATH' to find the tested program.
This avoids the need to generate absolute names of the various
tools, and makes it possible to test installed programs.
Therefore, knowing which programs are being exercised is crucial to
understanding problems in the test suite itself, or its occasional
misuses. It is a good idea to also subscribe foreign programs you
depend upon, to avoid incompatible diagnostics.
-- Macro: AT_BANNER (TEST-CATEGORY-NAME)
This macro identifies the start of a category of related test
groups. When the resulting 'testsuite' is invoked with more than
one test group to run, its output will include a banner containing
TEST-CATEGORY-NAME prior to any tests run from that category. The
banner should be no more than about 40 or 50 characters. A blank
banner indicates uncategorized tests; an empty line will be
inserted after tests from an earlier category, effectively ending
that category.
-- Macro: AT_SETUP (TEST-GROUP-NAME)
This macro starts a group of related tests, all to be executed in
the same subshell. It accepts a single argument, which holds a few
words (no more than about 30 or 40 characters) quickly describing
the purpose of the test group being started. TEST-GROUP-NAME must
not expand to unbalanced quotes, although quadrigraphs can be used.
-- Macro: AT_KEYWORDS (KEYWORDS)
Associate the space-separated list of KEYWORDS to the enclosing
test group. This makes it possible to run "slices" of the test
suite. For instance, if some of your test groups exercise some
'foo' feature, then using 'AT_KEYWORDS(foo)' lets you run
'./testsuite -k foo' to run exclusively these test groups. The
TEST-GROUP-NAME of the test group is automatically recorded to
'AT_KEYWORDS'.
Several invocations within a test group accumulate new keywords.
In other words, don't fear registering the same keyword several
times in a test group.
-- Macro: AT_CAPTURE_FILE (FILE)
If the current test group fails, log the contents of FILE. Several
identical calls within one test group have no additional effect.
-- Macro: AT_FAIL_IF (SHELL-CONDITION)
Make the test group fail and skip the rest of its execution, if
SHELL-CONDITION is true. SHELL-CONDITION is a shell expression
such as a 'test' command. Tests before 'AT_FAIL_IF' will be
executed and may still cause the test group to be skipped. You can
instantiate this macro many times from within the same test group.
You should use this macro only for very simple failure conditions.
If the SHELL-CONDITION could emit any kind of output you should
instead use 'AT_CHECK' like
AT_CHECK([if SHELL-CONDITION; then exit 99; fi])
so that such output is properly recorded in the 'testsuite.log'
file.
-- Macro: AT_SKIP_IF (SHELL-CONDITION)
Determine whether the test should be skipped because it requires
features that are unsupported on the machine under test.
SHELL-CONDITION is a shell expression such as a 'test' command.
Tests before 'AT_SKIP_IF' will be executed and may still cause the
test group to fail. You can instantiate this macro many times from
within the same test group.
You should use this macro only for very simple skip conditions. If
the SHELL-CONDITION could emit any kind of output you should
instead use 'AT_CHECK' like
AT_CHECK([if SHELL-CONDITION; then exit 77; fi])
so that such output is properly recorded in the 'testsuite.log'
file.
-- Macro: AT_XFAIL_IF (SHELL-CONDITION)
Determine whether the test is expected to fail because it is a
known bug (for unsupported features, you should skip the test).
SHELL-CONDITION is a shell expression such as a 'test' command; you
can instantiate this macro many times from within the same test
group, and one of the conditions is enough to turn the test into an
expected failure.
-- Macro: AT_CLEANUP
End the current test group.
-- Macro: AT_DATA (FILE, CONTENTS)
Initialize an input data FILE with given CONTENTS. Of course, the
CONTENTS have to be properly quoted between square brackets to
protect against included commas or spurious M4 expansion. CONTENTS
must be empty or end with a newline. FILE must be a single shell
word that expands into a single file name.
-- Macro: AT_CHECK (COMMANDS, [STATUS = 0], [STDOUT], [STDERR],
[RUN-IF-FAIL], [RUN-IF-PASS])
-- Macro: AT_CHECK_UNQUOTED (COMMANDS, [STATUS = 0], [STDOUT],
[STDERR], [RUN-IF-FAIL], [RUN-IF-PASS])
Execute a test by performing given shell COMMANDS in a subshell.
COMMANDS is output as-is, so shell expansions are honored. These
commands should normally exit with STATUS, while producing expected
STDOUT and STDERR contents. If COMMANDS exit with unexpected
status 77, then the rest of the test group is skipped. If COMMANDS
exit with unexpected status 99, then the test group is immediately
failed. Otherwise, if this test fails, run shell commands
RUN-IF-FAIL or, if this test passes, run shell commands
RUN-IF-PASS, both inside the current shell execution environment.
At the beginning of RUN-IF-FAIL and RUN-IF-PASS, the status of
COMMANDS is available in the 'at_status' shell variable.
This macro must be invoked in between 'AT_SETUP' and 'AT_CLEANUP'.
If STATUS is the literal 'ignore', then the corresponding exit
status is not checked, except for the special cases of 77 (skip)
and 99 (hard failure). The existence of hard failures allows one
to mark a test as an expected failure with 'AT_XFAIL_IF' because a
feature has not yet been implemented, but to still distinguish
between gracefully handling the missing feature and dumping core.
A hard failure also inhibits post-test actions in RUN-IF-FAIL.
If the value of the STDOUT or STDERR parameter is one of the
literals in the following table, then the test treats the output
according to the rules of that literal. Otherwise, the value of
the parameter is treated as text that must exactly match the output
given by COMMANDS on standard output and standard error (including
an empty parameter for no output); any differences are captured in
the testsuite log and the test is failed (unless an unexpected exit
status of 77 skipped the test instead). The difference between
'AT_CHECK' and 'AT_CHECK_UNQUOTED' is that only the latter performs
shell variable expansion ('$'), command substitution ('`'), and
backslash escaping ('\') on comparison text given in the STDOUT and
STDERR arguments; if the text includes a trailing newline, this
would be the same as if it were specified via an unquoted
here-document. (However, there is no difference in the
interpretation of COMMANDS).
'ignore'
The content of the output is ignored, but still captured in
the test group log (if the testsuite is run with option '-v',
the test group log is displayed as the test is run; if the
test group later fails, the test group log is also copied into
the overall testsuite log). This action is valid for both
STDOUT and STDERR.
'ignore-nolog'
The content of the output is ignored, and nothing is captured
in the log files. If COMMANDS are likely to produce binary
output (including long lines) or large amounts of output, then
logging the output can make it harder to locate details
related to subsequent tests within the group, and could
potentially corrupt terminal display of a user running
'testsuite -v'.
'stdout'
For the STDOUT parameter, capture the content of standard
output to both the file 'stdout' and the test group log.
Subsequent commands in the test group can then post-process
the file. This action is often used when it is desired to use
'grep' to look for a substring in the output, or when the
output must be post-processed to normalize error messages into
a common form.
'stderr'
Like 'stdout', except that it only works for the STDERR
parameter, and the standard error capture file will be named
'stderr'.
'stdout-nolog'
'stderr-nolog'
Like 'stdout' or 'stderr', except that the captured output is
not duplicated into the test group log. This action is
particularly useful for an intermediate check that produces
large amounts of data, which will be followed by another check
that filters down to the relevant data, as it makes it easier
to locate details in the log.
'expout'
For the STDOUT parameter, compare standard output contents
with the previously created file 'expout', and list any
differences in the testsuite log.
'experr'
Like 'expout', except that it only works for the STDERR
parameter, and the standard error contents are compared with
'experr'.
-- Macro: AT_CHECK_EUNIT (MODULE, TEST-SPEC, [ERLFLAGS], [RUN-IF-FAIL],
[RUN-IF-PASS])
Initialize and execute an Erlang module named MODULE that performs
tests following the TEST-SPEC EUnit test specification. TEST-SPEC
must be a valid EUnit test specification, as defined in the EUnit
Reference Manual (http://erlang.org/doc/apps/eunit/index.html).
ERLFLAGS are optional command-line options passed to the Erlang
interpreter to execute the test Erlang module. Typically, ERLFLAGS
defines at least the paths to directories containing the compiled
Erlang modules under test, as '-pa path1 path2 ...'.
For example, the unit tests associated with Erlang module 'testme',
which compiled code is in subdirectory 'src', can be performed
with:
AT_CHECK_EUNIT([testme_testsuite], [{module, testme}],
[-pa "${abs_top_builddir}/src"])
This macro must be invoked in between 'AT_SETUP' and 'AT_CLEANUP'.
Variables 'ERL', 'ERLC', and (optionally) 'ERLCFLAGS' must be
defined as the path of the Erlang interpreter, the path of the
Erlang compiler, and the command-line flags to pass to the
compiler, respectively. Those variables should be configured in
'configure.ac' using the 'AC_ERLANG_PATH_ERL' and
'AC_ERLANG_PATH_ERLC' macros, and the configured values of those
variables are automatically defined in the testsuite. If 'ERL' or
'ERLC' is not defined, the test group is skipped.
If the EUnit library cannot be found, i.e. if module 'eunit'
cannot be loaded, the test group is skipped. Otherwise, if
TEST-SPEC is an invalid EUnit test specification, the test group
fails. Otherwise, if the EUnit test passes, shell commands
RUN-IF-PASS are executed or, if the EUnit test fails, shell
commands RUN-IF-FAIL are executed and the test group fails.
Only the generated test Erlang module is automatically compiled and
executed. If TEST-SPEC involves testing other Erlang modules, e.g.
module 'testme' in the example above, those modules must be already
compiled.
If the testsuite is run in verbose mode, with option '--verbose',
EUnit is also run in verbose mode to output more details about
individual unit tests.
File: autoconf.info, Node: testsuite Invocation, Next: Making testsuite Scripts, Prev: Writing Testsuites, Up: Using Autotest
19.3 Running 'testsuite' Scripts
================================
Autotest test suites support the following options:
'--help'
'-h'
Display the list of options and exit successfully.
'--version'
'-V'
Display the version of the test suite and exit successfully.
'--directory=DIR'
'-C DIR'
Change the current directory to DIR before creating any files.
Useful for running the testsuite in a subdirectory from a top-level
Makefile.
'--jobs[=N]'
'-j[N]'
Run N tests in parallel, if possible. If N is not given, run all
given tests in parallel. Note that there should be no space before
the argument to '-j', as '-j NUMBER' denotes the separate arguments
'-j' and 'NUMBER', see below.
In parallel mode, the standard input device of the testsuite script
is not available to commands inside a test group. Furthermore,
banner lines are not printed, and the summary line for each test
group is output after the test group completes. Summary lines may
appear unordered. If verbose and trace output are enabled (see
below), they may appear intermixed from concurrently running tests.
Parallel mode requires the 'mkfifo' command to work, and will be
silently disabled otherwise.
'--clean'
'-c'
Remove all the files the test suite might have created and exit.
Meant for 'clean' Make targets.
'--list'
'-l'
List all the tests (or only the selection), including their
possible keywords.
By default all tests are performed (or described with '--list')
silently in the default environment, but the environment, set of tests,
and verbosity level can be tuned:
'VARIABLE=VALUE'
Set the environment VARIABLE to VALUE. Use this rather than
'FOO=foo ./testsuite' as debugging scripts would then run in a
different environment.
The variable 'AUTOTEST_PATH' specifies the testing path to prepend
to 'PATH'. Relative directory names (not starting with '/') are
considered to be relative to the top level of the package being
built. All directories are made absolute, first starting from the
top level _build_ tree, then from the _source_ tree. For instance
'./testsuite AUTOTEST_PATH=tests:bin' for a '/src/foo-1.0' source
package built in '/tmp/foo' results in
'/tmp/foo/tests:/tmp/foo/bin' and then
'/src/foo-1.0/tests:/src/foo-1.0/bin' being prepended to 'PATH'.
'NUMBER'
'NUMBER-NUMBER'
'NUMBER-'
'-NUMBER'
Add the corresponding test groups, with obvious semantics, to the
selection.
'--keywords=KEYWORDS'
'-k KEYWORDS'
Add to the selection the test groups with title or keywords
(arguments to 'AT_SETUP' or 'AT_KEYWORDS') that match _all_
keywords of the comma separated list KEYWORDS, case-insensitively.
Use '!' immediately before the keyword to invert the selection for
this keyword. By default, the keywords match whole words; enclose
them in '.*' to also match parts of words.
For example, running
./testsuite -k 'autoupdate,.*FUNC.*'
selects all tests tagged 'autoupdate' _and_ with tags containing
'FUNC' (as in 'AC_CHECK_FUNC', 'AC_FUNC_ALLOCA', etc.), while
./testsuite -k '!autoupdate' -k '.*FUNC.*'
selects all tests not tagged 'autoupdate' _or_ with tags containing
'FUNC'.
'--errexit'
'-e'
If any test fails, immediately abort testing. This implies
'--debug': post test group clean up, and top-level logging are
inhibited. This option is meant for the full test suite, it is not
really useful for generated debugging scripts. If the testsuite is
run in parallel mode using '--jobs', then concurrently running
tests will finish before exiting.
'--verbose'
'-v'
Force more verbosity in the detailed output of what is being done.
This is the default for debugging scripts.
'--color'
'--color[=never|auto|always]'
Enable colored test results. Without an argument, or with
'always', test results will be colored. With 'never', color mode
is turned off. Otherwise, if either the macro 'AT_COLOR_TESTS' is
used by the testsuite author, or the argument 'auto' is given, then
test results are colored if standard output is connected to a
terminal.
'--debug'
'-d'
Do not remove the files after a test group was performed--but they
are still removed _before_, therefore using this option is sane
when running several test groups. Create debugging scripts. Do
not overwrite the top-level log (in order to preserve a supposedly
existing full log file). This is the default for debugging
scripts, but it can also be useful to debug the testsuite itself.
'--recheck'
Add to the selection all test groups that failed or passed
unexpectedly during the last non-debugging test run.
'--trace'
'-x'
Trigger shell tracing of the test groups.
Besides these options accepted by every Autotest testsuite, the
testsuite author might have added package-specific options via the
'AT_ARG_OPTION' and 'AT_ARG_OPTION_ARG' macros (*note Writing
Testsuites::); refer to 'testsuite --help' and the package documentation
for details.
File: autoconf.info, Node: Making testsuite Scripts, Prev: testsuite Invocation, Up: Using Autotest
19.4 Making 'testsuite' Scripts
===============================
For putting Autotest into movement, you need some configuration and
makefile machinery. We recommend, at least if your package uses deep or
shallow hierarchies, that you use 'tests/' as the name of the directory
holding all your tests and their makefile. Here is a check list of
things to do.
- Make sure to create the file 'package.m4', which defines the
identity of the package. It must define 'AT_PACKAGE_STRING', the
full signature of the package, and 'AT_PACKAGE_BUGREPORT', the
address to which bug reports should be sent. For sake of
completeness, we suggest that you also define 'AT_PACKAGE_NAME',
'AT_PACKAGE_TARNAME', 'AT_PACKAGE_VERSION', and 'AT_PACKAGE_URL'.
*Note Initializing configure::, for a description of these
variables. Be sure to distribute 'package.m4' and to put it into
the source hierarchy: the test suite ought to be shipped! See
below for an example 'Makefile' excerpt.
- Invoke 'AC_CONFIG_TESTDIR'.
-- Macro: AC_CONFIG_TESTDIR (DIRECTORY, [TEST-PATH = directory])
An Autotest test suite is to be configured in DIRECTORY. This
macro causes 'DIRECTORY/atconfig' to be created by
'config.status' and sets the default 'AUTOTEST_PATH' to
TEST-PATH (*note testsuite Invocation::).
- Still within 'configure.ac', as appropriate, ensure that some
'AC_CONFIG_FILES' command includes substitution for
'tests/atlocal'.
- The appropriate 'Makefile' should be modified so the validation in
your package is triggered by 'make check'. An example is provided
below.
With Automake, here is a minimal example for inclusion in
'tests/Makefile.am', in order to link 'make check' with a validation
suite.
# The `:;' works around a Bash 3.2 bug when the output is not writable.
$(srcdir)/package.m4: $(top_srcdir)/configure.ac
:;{ \
echo '# Signature of the current package.' && \
echo 'm4_define([AT_PACKAGE_NAME],' && \
echo ' [$(PACKAGE_NAME)])' && \
echo 'm4_define([AT_PACKAGE_TARNAME],' && \
echo ' [$(PACKAGE_TARNAME)])' && \
echo 'm4_define([AT_PACKAGE_VERSION],' && \
echo ' [$(PACKAGE_VERSION)])' && \
echo 'm4_define([AT_PACKAGE_STRING],' && \
echo ' [$(PACKAGE_STRING)])' && \
echo 'm4_define([AT_PACKAGE_BUGREPORT],' && \
echo ' [$(PACKAGE_BUGREPORT)])'; \
echo 'm4_define([AT_PACKAGE_URL],' && \
echo ' [$(PACKAGE_URL)])'; \
} >'$(srcdir)/package.m4'
EXTRA_DIST = testsuite.at $(srcdir)/package.m4 $(TESTSUITE) atlocal.in
TESTSUITE = $(srcdir)/testsuite
check-local: atconfig atlocal $(TESTSUITE)
$(SHELL) '$(TESTSUITE)' $(TESTSUITEFLAGS)
installcheck-local: atconfig atlocal $(TESTSUITE)
$(SHELL) '$(TESTSUITE)' AUTOTEST_PATH='$(bindir)' \
$(TESTSUITEFLAGS)
clean-local:
test ! -f '$(TESTSUITE)' || \
$(SHELL) '$(TESTSUITE)' --clean
AUTOM4TE = $(SHELL) $(srcdir)/build-aux/missing --run autom4te
AUTOTEST = $(AUTOM4TE) --language=autotest
$(TESTSUITE): $(srcdir)/testsuite.at $(srcdir)/package.m4
$(AUTOTEST) -I '$(srcdir)' -o $@.tmp $@.at
mv $@.tmp $@
Note that the built testsuite is distributed; this is necessary
because users might not have Autoconf installed, and thus would not be
able to rebuild it. Likewise, the use of 'missing' provides the user
with a nicer error message if they modify a source file to the
testsuite, and accidentally trigger the rebuild rules.
You might want to list explicitly the dependencies, i.e., the list of
the files 'testsuite.at' includes.
If you don't use Automake, you should include the above example in
'tests/Makefile.in', along with additional lines inspired from the
following:
subdir = tests
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_URL = @PACKAGE_URL@
atconfig: $(top_builddir)/config.status
cd $(top_builddir) && \
$(SHELL) ./config.status $(subdir)/$@
atlocal: $(srcdir)/atlocal.in $(top_builddir)/config.status
cd $(top_builddir) && \
$(SHELL) ./config.status $(subdir)/$@
and manage to have '$(EXTRA_DIST)' distributed. You will also want to
distribute the file 'build-aux/missing' from the Automake project; a
copy of this file resides in the Autoconf source tree.
With all this in place, and if you have not initialized
'TESTSUITEFLAGS' within your makefile, you can fine-tune test suite
execution with this variable, for example:
make check TESTSUITEFLAGS='-v -d -x 75 -k AC_PROG_CC CFLAGS=-g'
File: autoconf.info, Node: FAQ, Next: History, Prev: Using Autotest, Up: Top
20 Frequent Autoconf Questions, with answers
********************************************
Several questions about Autoconf come up occasionally. Here some of
them are addressed.
* Menu:
* Distributing:: Distributing 'configure' scripts
* Why GNU M4:: Why not use the standard M4?
* Bootstrapping:: Autoconf and GNU M4 require each other?
* Why Not Imake:: Why GNU uses 'configure' instead of Imake
* Defining Directories:: Passing 'datadir' to program
* Autom4te Cache:: What is it? Can I remove it?
* Present But Cannot Be Compiled:: Compiler and Preprocessor Disagree
* Expanded Before Required:: Expanded Before Required
* Debugging:: Debugging 'configure' scripts
File: autoconf.info, Node: Distributing, Next: Why GNU M4, Up: FAQ
20.1 Distributing 'configure' Scripts
=====================================
What are the restrictions on distributing 'configure'
scripts that Autoconf generates? How does that affect my
programs that use them?
There are no restrictions on how the configuration scripts that
Autoconf produces may be distributed or used. In Autoconf version 1,
they were covered by the GNU General Public License. We still encourage
software authors to distribute their work under terms like those of the
GPL, but doing so is not required to use Autoconf.
Of the other files that might be used with 'configure', 'config.h.in'
is under whatever copyright you use for your 'configure.ac'.
'config.sub' and 'config.guess' have an exception to the GPL when they
are used with an Autoconf-generated 'configure' script, which permits
you to distribute them under the same terms as the rest of your package.
'install-sh' is from the X Consortium and is not copyrighted.
File: autoconf.info, Node: Why GNU M4, Next: Bootstrapping, Prev: Distributing, Up: FAQ
20.2 Why Require GNU M4?
========================
Why does Autoconf require GNU M4?
Many M4 implementations have hard-coded limitations on the size and
number of macros that Autoconf exceeds. They also lack several builtin
macros that it would be difficult to get along without in a
sophisticated application like Autoconf, including:
m4_builtin
m4_indir
m4_bpatsubst
__file__
__line__
Autoconf requires version 1.4.6 or later of GNU M4.
Since only software maintainers need to use Autoconf, and since GNU
M4 is simple to configure and install, it seems reasonable to require
GNU M4 to be installed also. Many maintainers of GNU and other free
software already have most of the GNU utilities installed, since they
prefer them.
File: autoconf.info, Node: Bootstrapping, Next: Why Not Imake, Prev: Why GNU M4, Up: FAQ
20.3 How Can I Bootstrap?
=========================
If Autoconf requires GNU M4 and GNU M4 has an Autoconf
'configure' script, how do I bootstrap? It seems like a chicken
and egg problem!
This is a misunderstanding. Although GNU M4 does come with a
'configure' script produced by Autoconf, Autoconf is not required in
order to run the script and install GNU M4. Autoconf is only required
if you want to change the M4 'configure' script, which few people have
to do (mainly its maintainer).
File: autoconf.info, Node: Why Not Imake, Next: Defining Directories, Prev: Bootstrapping, Up: FAQ
20.4 Why Not Imake?
===================
Why not use Imake instead of 'configure' scripts?
Several people have written addressing this question, so adaptations
of their explanations are included here.
The following answer is based on one written by Richard Pixley:
Autoconf generated scripts frequently work on machines that it has
never been set up to handle before. That is, it does a good job of
inferring a configuration for a new system. Imake cannot do this.
Imake uses a common database of host specific data. For X11, this
makes sense because the distribution is made as a collection of
tools, by one central authority who has control over the database.
GNU tools are not released this way. Each GNU tool has a
maintainer; these maintainers are scattered across the world.
Using a common database would be a maintenance nightmare. Autoconf
may appear to be this kind of database, but in fact it is not.
Instead of listing host dependencies, it lists program
requirements.
If you view the GNU suite as a collection of native tools, then the
problems are similar. But the GNU development tools can be
configured as cross tools in almost any host+target permutation.
All of these configurations can be installed concurrently. They
can even be configured to share host independent files across
hosts. Imake doesn't address these issues.
Imake templates are a form of standardization. The GNU coding
standards address the same issues without necessarily imposing the
same restrictions.
Here is some further explanation, written by Per Bothner:
One of the advantages of Imake is that it is easy to generate large
makefiles using the '#include' and macro mechanisms of 'cpp'.
However, 'cpp' is not programmable: it has limited conditional
facilities, and no looping. And 'cpp' cannot inspect its
environment.
All of these problems are solved by using 'sh' instead of 'cpp'.
The shell is fully programmable, has macro substitution, can
execute (or source) other shell scripts, and can inspect its
environment.
Paul Eggert elaborates more:
With Autoconf, installers need not assume that Imake itself is
already installed and working well. This may not seem like much of
an advantage to people who are accustomed to Imake. But on many
hosts Imake is not installed or the default installation is not
working well, and requiring Imake to install a package hinders the
acceptance of that package on those hosts. For example, the Imake
template and configuration files might not be installed properly on
a host, or the Imake build procedure might wrongly assume that all
source files are in one big directory tree, or the Imake
configuration might assume one compiler whereas the package or the
installer needs to use another, or there might be a version
mismatch between the Imake expected by the package and the Imake
supported by the host. These problems are much rarer with
Autoconf, where each package comes with its own independent
configuration processor.
Also, Imake often suffers from unexpected interactions between
'make' and the installer's C preprocessor. The fundamental problem
here is that the C preprocessor was designed to preprocess C
programs, not makefiles. This is much less of a problem with
Autoconf, which uses the general-purpose preprocessor M4, and where
the package's author (rather than the installer) does the
preprocessing in a standard way.
Finally, Mark Eichin notes:
Imake isn't all that extensible, either. In order to add new
features to Imake, you need to provide your own project template,
and duplicate most of the features of the existing one. This means
that for a sophisticated project, using the vendor-provided Imake
templates fails to provide any leverage--since they don't cover
anything that your own project needs (unless it is an X11 program).
On the other side, though:
The one advantage that Imake has over 'configure': 'Imakefile'
files tend to be much shorter (likewise, less redundant) than
'Makefile.in' files. There is a fix to this, however--at least for
the Kerberos V5 tree, we've modified things to call in common
'post.in' and 'pre.in' makefile fragments for the entire tree.
This means that a lot of common things don't have to be duplicated,
even though they normally are in 'configure' setups.
File: autoconf.info, Node: Defining Directories, Next: Autom4te Cache, Prev: Why Not Imake, Up: FAQ
20.5 How Do I '#define' Installation Directories?
=================================================
My program needs library files, installed in 'datadir' and
similar. If I use
AC_DEFINE_UNQUOTED([DATADIR], [$datadir],
[Define to the read-only architecture-independent
data directory.])
I get
#define DATADIR "${prefix}/share"
As already explained, this behavior is on purpose, mandated by the
GNU Coding Standards, see *note Installation Directory Variables::.
There are several means to achieve a similar goal:
- Do not use 'AC_DEFINE' but use your makefile to pass the actual
value of 'datadir' via compilation flags. *Note Installation
Directory Variables::, for the details.
- This solution can be simplified when compiling a program: you may
either extend the 'CPPFLAGS':
CPPFLAGS = -DDATADIR='"$(datadir)"' @CPPFLAGS@
If you are using Automake, you should use 'AM_CPPFLAGS' instead:
AM_CPPFLAGS = -DDATADIR='"$(datadir)"'
Alternatively, create a dedicated header file:
DISTCLEANFILES = myprog-paths.h
myprog-paths.h: Makefile
echo '#define DATADIR "$(datadir)"' >$@
The gnulib module 'configmake' provides such a header with all the
standard directory variables defined, *note (gnulib)configmake::.
- Use 'AC_DEFINE' but have 'configure' compute the literal value of
'datadir' and others. Many people have wrapped macros to automate
this task; for an example, see the macro 'AC_DEFINE_DIR' from the
Autoconf Macro Archive
(http://www.gnu.org/software/autoconf-archive/).
This solution does not conform to the GNU Coding Standards.
- Note that all the previous solutions hard wire the absolute name of
these directories in the executables, which is not a good property.
You may try to compute the names relative to 'prefix', and try to
find 'prefix' at runtime, this way your package is relocatable.
File: autoconf.info, Node: Autom4te Cache, Next: Present But Cannot Be Compiled, Prev: Defining Directories, Up: FAQ
20.6 What is 'autom4te.cache'?
==============================
What is this directory 'autom4te.cache'? Can I safely remove it?
In the GNU Build System, 'configure.ac' plays a central role and is
read by many tools: 'autoconf' to create 'configure', 'autoheader' to
create 'config.h.in', 'automake' to create 'Makefile.in', 'autoscan' to
check the completeness of 'configure.ac', 'autoreconf' to check the GNU
Build System components that are used. To "read 'configure.ac'"
actually means to compile it with M4, which can be a long process for
complex 'configure.ac'.
This is why all these tools, instead of running directly M4, invoke
'autom4te' (*note autom4te Invocation::) which, while answering to a
specific demand, stores additional information in 'autom4te.cache' for
future runs. For instance, if you run 'autoconf', behind the scenes,
'autom4te' also stores information for the other tools, so that when you
invoke 'autoheader' or 'automake' etc., reprocessing 'configure.ac' is
not needed. The speed up is frequently 30%, and is increasing with the
size of 'configure.ac'.
But it is and remains being simply a cache: you can safely remove it.
Can I permanently get rid of it?
The creation of this cache can be disabled from '~/.autom4te.cfg',
see *note Customizing autom4te::, for more details. You should be aware
that disabling the cache slows down the Autoconf test suite by 40%. The
more GNU Build System components are used, the more the cache is useful;
for instance running 'autoreconf -f' on the Core Utilities is twice
slower without the cache _although '--force' implies that the cache is
not fully exploited_, and eight times slower than without '--force'.
File: autoconf.info, Node: Present But Cannot Be Compiled, Next: Expanded Before Required, Prev: Autom4te Cache, Up: FAQ
20.7 Header Present But Cannot Be Compiled
==========================================
The most important guideline to bear in mind when checking for features
is to mimic as much as possible the intended use. Unfortunately, old
versions of 'AC_CHECK_HEADER' and 'AC_CHECK_HEADERS' failed to follow
this idea, and called the preprocessor, instead of the compiler, to
check for headers. As a result, incompatibilities between headers went
unnoticed during configuration, and maintainers finally had to deal with
this issue elsewhere.
The transition began with Autoconf 2.56. As of Autoconf 2.64 both
checks are performed, and 'configure' complains loudly if the compiler
and the preprocessor do not agree. However, only the compiler result is
considered.
Consider the following example:
$ cat number.h
typedef int number;
$ cat pi.h
const number pi = 3;
$ cat configure.ac
AC_INIT([Example], [1.0], [bug-example@example.org])
AC_CHECK_HEADERS([pi.h])
$ autoconf -Wall
$ ./configure
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking how to run the C preprocessor... gcc -E
checking for grep that handles long lines and -e... grep
checking for egrep... grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking pi.h usability... no
checking pi.h presence... yes
configure: WARNING: pi.h: present but cannot be compiled
configure: WARNING: pi.h: check for missing prerequisite headers?
configure: WARNING: pi.h: see the Autoconf documentation
configure: WARNING: pi.h: section "Present But Cannot Be Compiled"
configure: WARNING: pi.h: proceeding with the compiler's result
configure: WARNING: ## -------------------------------------- ##
configure: WARNING: ## Report this to bug-example@example.org ##
configure: WARNING: ## -------------------------------------- ##
checking for pi.h... yes
The proper way the handle this case is using the fourth argument (*note
Generic Headers::):
$ cat configure.ac
AC_INIT([Example], [1.0], [bug-example@example.org])
AC_CHECK_HEADERS([number.h pi.h], [], [],
[[#ifdef HAVE_NUMBER_H
# include <number.h>
#endif
]])
$ autoconf -Wall
$ ./configure
checking for gcc... gcc
checking for C compiler default output... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking for number.h... yes
checking for pi.h... yes
See *note Particular Headers::, for a list of headers with their
prerequisites.
File: autoconf.info, Node: Expanded Before Required, Next: Debugging, Prev: Present But Cannot Be Compiled, Up: FAQ
20.8 Expanded Before Required
=============================
Older versions of Autoconf silently built files with incorrect ordering
between dependent macros if an outer macro first expanded, then later
indirectly required, an inner macro. Starting with Autoconf 2.64, this
situation no longer generates out-of-order code, but results in
duplicate output and a syntax warning:
$ cat configure.ac
=>AC_DEFUN([TESTA], [[echo in A
=>if test -n "$SEEN_A" ; then echo duplicate ; fi
=>SEEN_A=:]])
=>AC_DEFUN([TESTB], [AC_REQUIRE([TESTA])[echo in B
=>if test -z "$SEEN_A" ; then echo bug ; fi]])
=>AC_DEFUN([TESTC], [AC_REQUIRE([TESTB])[echo in C]])
=>AC_DEFUN([OUTER], [[echo in OUTER]
=>TESTA
=>TESTC])
=>AC_INIT
=>OUTER
=>AC_OUTPUT
$ autoconf
=>configure.ac:11: warning: AC_REQUIRE:
=> `TESTA' was expanded before it was required
=>configure.ac:4: TESTB is expanded from...
=>configure.ac:6: TESTC is expanded from...
=>configure.ac:7: OUTER is expanded from...
=>configure.ac:11: the top level
To avoid this warning, decide what purpose the macro in question serves.
If it only needs to be expanded once (for example, if it provides
initialization text used by later macros), then the simplest fix is to
change the macro to be declared with 'AC_DEFUN_ONCE' (*note One-Shot
Macros::), although this only works in Autoconf 2.64 and newer. A more
portable fix is to change all instances of direct calls to instead go
through 'AC_REQUIRE' (*note Prerequisite Macros::). If, instead, the
macro is parameterized by arguments or by the current definition of
other macros in the m4 environment, then the macro should always be
directly expanded instead of required.
For another case study, consider this example trimmed down from an
actual package. Originally, the package contained shell code and
multiple macro invocations at the top level of 'configure.ac':
AC_DEFUN([FOO], [AC_COMPILE_IFELSE([...])])
foobar=
AC_PROG_CC
FOO
but that was getting complex, so the author wanted to offload some of
the text into a new macro in another file included via 'aclocal.m4'.
The naïve approach merely wraps the text in a new macro:
AC_DEFUN([FOO], [AC_COMPILE_IFELSE([...])])
AC_DEFUN([BAR], [
foobar=
AC_PROG_CC
FOO
])
BAR
With older versions of Autoconf, the setting of 'foobar=' occurs before
the single compiler check, as the author intended. But with Autoconf
2.64, this issues the "expanded before it was required" warning for
'AC_PROG_CC', and outputs two copies of the compiler check, one before
'foobar=', and one after. To understand why this is happening, remember
that the use of 'AC_COMPILE_IFELSE' includes a call to
'AC_REQUIRE([AC_PROG_CC])' under the hood. According to the documented
semantics of 'AC_REQUIRE', this means that 'AC_PROG_CC' _must_ occur
before the body of the outermost 'AC_DEFUN', which in this case is
'BAR', thus preceding the use of 'foobar='. The older versions of
Autoconf were broken with regards to the rules of 'AC_REQUIRE', which
explains why the code changed from one over to two copies of
'AC_PROG_CC' when upgrading autoconf. In other words, the author was
unknowingly relying on a bug exploit to get the desired results, and
that exploit broke once the bug was fixed.
So, what recourse does the author have, to restore their intended
semantics of setting 'foobar=' prior to a single compiler check,
regardless of whether Autoconf 2.63 or 2.64 is used? One idea is to
remember that only 'AC_DEFUN' is impacted by 'AC_REQUIRE'; there is
always the possibility of using the lower-level 'm4_define':
AC_DEFUN([FOO], [AC_COMPILE_IFELSE([...])])
m4_define([BAR], [
foobar=
AC_PROG_CC
FOO
])
BAR
This works great if everything is in the same file. However, it does
not help in the case where the author wants to have 'aclocal' find the
definition of 'BAR' from its own file, since 'aclocal' requires the use
of 'AC_DEFUN'. In this case, a better fix is to recognize that if 'BAR'
also uses 'AC_REQUIRE', then there will no longer be direct expansion
prior to a subsequent require. Then, by creating yet another helper
macro, the author can once again guarantee a single invocation of
'AC_PROG_CC', which will still occur after 'foobar='. The author can
also use 'AC_BEFORE' to make sure no other macro appearing before 'BAR'
has triggered an unwanted expansion of 'AC_PROG_CC'.
AC_DEFUN([FOO], [AC_COMPILE_IFELSE([...])])
AC_DEFUN([BEFORE_CC], [
foobar=
])
AC_DEFUN([BAR], [
AC_BEFORE([$0], [AC_PROG_CC])dnl
AC_REQUIRE([BEFORE_CC])dnl
AC_REQUIRE([AC_PROG_CC])dnl
FOO
])
BAR
File: autoconf.info, Node: Debugging, Prev: Expanded Before Required, Up: FAQ
20.9 Debugging 'configure' scripts
==================================
While in general, 'configure' scripts generated by Autoconf strive to be
fairly portable to various systems, compilers, shells, and other tools,
it may still be necessary to debug a failing test, broken script or
makefile, or fix or override an incomplete, faulty, or erroneous test,
especially during macro development. Failures can occur at all levels,
in M4 syntax or semantics, shell script issues, or due to bugs in the
test or the tools invoked by 'configure'. Together with the rather
arcane error message that 'm4' and 'make' may produce when their input
contains syntax errors, this can make debugging rather painful.
Nevertheless, here is a list of hints and strategies that may help:
* When 'autoconf' fails, common causes for error include:
* mismatched or unbalanced parentheses or braces (*note
Balancing Parentheses::),
* under- or overquoted macro arguments (*note Autoconf
Language::, *note Quoting and Parameters::, *note Quotation
and Nested Macros::),
* spaces between macro name and opening parenthesis (*note
Autoconf Language::).
Typically, it helps to go back to the last working version of the
input and compare the differences for each of these errors.
Another possibility is to sprinkle pairs of 'm4_traceon' and
'm4_traceoff' judiciously in the code, either without a parameter
or listing some macro names and watch 'm4' expand its input
verbosely (*note Debugging via autom4te::).
* Sometimes 'autoconf' succeeds but the generated 'configure' script
has invalid shell syntax. You can detect this case by running
'bash -n configure' or 'sh -n configure'. If this command fails,
the same tips apply, as if 'autoconf' had failed.
* Debugging 'configure' script execution may be done by sprinkling
pairs of 'set -x' and 'set +x' into the shell script before and
after the region that contains a bug. Running the whole script
with 'SHELL -vx ./configure 2>&1 | tee LOG-FILE' with a decent
SHELL may work, but produces lots of output. Here, it can help to
search for markers like 'checking for' a particular test in the
LOG-FILE.
* Alternatively, you might use a shell with debugging capabilities
like bashdb (http://bashdb.sourceforge.net/).
* When 'configure' tests produce invalid results for your system, it
may be necessary to override them:
* For programs, tools or libraries variables, preprocessor,
compiler, or linker flags, it is often sufficient to override
them at 'make' run time with some care (*note Macros and
Submakes::). Since this normally won't cause 'configure' to
be run again with these changed settings, it may fail if the
changed variable would have caused different test results from
'configure', so this may work only for simple differences.
* Most tests which produce their result in a substituted
variable allow to override the test by setting the variable on
the 'configure' command line (*note Compilers and Options::,
*note Defining Variables::, *note Particular Systems::).
* Many tests store their result in a cache variable (*note
Caching Results::). This lets you override them either on the
'configure' command line as above, or through a primed cache
or site file (*note Cache Files::, *note Site Defaults::).
The name of a cache variable is documented with a test macro
or may be inferred from *note Cache Variable Names::; the
precise semantics of undocumented variables are often internal
details, subject to change.
* Alternatively, 'configure' may produce invalid results because of
uncaught programming errors, in your package or in an upstream
library package. For example, when 'AC_CHECK_LIB' fails to find a
library with a specified function, always check 'config.log'. This
will reveal the exact error that produced the failing result: the
library linked by 'AC_CHECK_LIB' probably has a fatal bug.
Conversely, as macro author, you can make it easier for users of your
macro:
* by minimizing dependencies between tests and between test results
as far as possible,
* by using 'make' variables to factorize and allow override of
settings at 'make' run time,
* by honoring the GNU Coding Standards and not overriding flags
reserved for the user except temporarily during 'configure' tests,
* by not requiring users of your macro to use the cache variables.
Instead, expose the result of the test via RUN-IF-TRUE and
RUN-IF-FALSE parameters. If the result is not a boolean, then
provide it through documented shell variables.
File: autoconf.info, Node: History, Next: GNU Free Documentation License, Prev: FAQ, Up: Top
21 History of Autoconf
**********************
_This chapter was written by the original author, David MacKenzie._
You may be wondering, Why was Autoconf originally written? How did
it get into its present form? (Why does it look like gorilla spit?) If
you're not wondering, then this chapter contains no information useful
to you, and you might as well skip it. If you _are_ wondering, then let
there be light...
* Menu:
* Genesis:: Prehistory and naming of 'configure'
* Exodus:: The plagues of M4 and Perl
* Leviticus:: The priestly code of portability arrives
* Numbers:: Growth and contributors
* Deuteronomy:: Approaching the promises of easy configuration
File: autoconf.info, Node: Genesis, Next: Exodus, Up: History
21.1 Genesis
============
In June 1991 I was maintaining many of the GNU utilities for the Free
Software Foundation. As they were ported to more platforms and more
programs were added, the number of '-D' options that users had to select
in the makefile (around 20) became burdensome. Especially for me--I had
to test each new release on a bunch of different systems. So I wrote a
little shell script to guess some of the correct settings for the
fileutils package, and released it as part of fileutils 2.0. That
'configure' script worked well enough that the next month I adapted it
(by hand) to create similar 'configure' scripts for several other GNU
utilities packages. Brian Berliner also adapted one of my scripts for
his CVS revision control system.
Later that summer, I learned that Richard Stallman and Richard Pixley
were developing similar scripts to use in the GNU compiler tools; so I
adapted my 'configure' scripts to support their evolving interface:
using the file name 'Makefile.in' as the templates; adding '+srcdir',
the first option (of many); and creating 'config.status' files.
File: autoconf.info, Node: Exodus, Next: Leviticus, Prev: Genesis, Up: History
21.2 Exodus
===========
As I got feedback from users, I incorporated many improvements, using
Emacs to search and replace, cut and paste, similar changes in each of
the scripts. As I adapted more GNU utilities packages to use
'configure' scripts, updating them all by hand became impractical. Rich
Murphey, the maintainer of the GNU graphics utilities, sent me mail
saying that the 'configure' scripts were great, and asking if I had a
tool for generating them that I could send him. No, I thought, but I
should! So I started to work out how to generate them. And the journey
from the slavery of hand-written 'configure' scripts to the abundance
and ease of Autoconf began.
Cygnus 'configure', which was being developed at around that time, is
table driven; it is meant to deal mainly with a discrete number of
system types with a small number of mainly unguessable features (such as
details of the object file format). The automatic configuration system
that Brian Fox had developed for Bash takes a similar approach. For
general use, it seems to me a hopeless cause to try to maintain an
up-to-date database of which features each variant of each operating
system has. It's easier and more reliable to check for most features on
the fly--especially on hybrid systems that people have hacked on locally
or that have patches from vendors installed.
I considered using an architecture similar to that of Cygnus
'configure', where there is a single 'configure' script that reads
pieces of 'configure.in' when run. But I didn't want to have to
distribute all of the feature tests with every package, so I settled on
having a different 'configure' made from each 'configure.in' by a
preprocessor. That approach also offered more control and flexibility.
I looked briefly into using the Metaconfig package, by Larry Wall,
Harlan Stenn, and Raphael Manfredi, but I decided not to for several
reasons. The 'Configure' scripts it produces are interactive, which I
find quite inconvenient; I didn't like the ways it checked for some
features (such as library functions); I didn't know that it was still
being maintained, and the 'Configure' scripts I had seen didn't work on
many modern systems (such as System V R4 and NeXT); it wasn't flexible
in what it could do in response to a feature's presence or absence; I
found it confusing to learn; and it was too big and complex for my needs
(I didn't realize then how much Autoconf would eventually have to grow).
I considered using Perl to generate my style of 'configure' scripts,
but decided that M4 was better suited to the job of simple textual
substitutions: it gets in the way less, because output is implicit.
Plus, everyone already has it. (Initially I didn't rely on the GNU
extensions to M4.) Also, some of my friends at the University of
Maryland had recently been putting M4 front ends on several programs,
including 'tvtwm', and I was interested in trying out a new language.
File: autoconf.info, Node: Leviticus, Next: Numbers, Prev: Exodus, Up: History
21.3 Leviticus
==============
Since my 'configure' scripts determine the system's capabilities
automatically, with no interactive user intervention, I decided to call
the program that generates them Autoconfig. But with a version number
tacked on, that name would be too long for old Unix file systems, so I
shortened it to Autoconf.
In the fall of 1991 I called together a group of fellow questers
after the Holy Grail of portability (er, that is, alpha testers) to give
me feedback as I encapsulated pieces of my handwritten scripts in M4
macros and continued to add features and improve the techniques used in
the checks. Prominent among the testers were François Pinard, who came
up with the idea of making an Autoconf shell script to run M4 and check
for unresolved macro calls; Richard Pixley, who suggested running the
compiler instead of searching the file system to find include files and
symbols, for more accurate results; Karl Berry, who got Autoconf to
configure TeX and added the macro index to the documentation; and Ian
Lance Taylor, who added support for creating a C header file as an
alternative to putting '-D' options in a makefile, so he could use
Autoconf for his UUCP package. The alpha testers cheerfully adjusted
their files again and again as the names and calling conventions of the
Autoconf macros changed from release to release. They all contributed
many specific checks, great ideas, and bug fixes.
File: autoconf.info, Node: Numbers, Next: Deuteronomy, Prev: Leviticus, Up: History
21.4 Numbers
============
In July 1992, after months of alpha testing, I released Autoconf 1.0,
and converted many GNU packages to use it. I was surprised by how
positive the reaction to it was. More people started using it than I
could keep track of, including people working on software that wasn't
part of the GNU Project (such as TCL, FSP, and Kerberos V5). Autoconf
continued to improve rapidly, as many people using the 'configure'
scripts reported problems they encountered.
Autoconf turned out to be a good torture test for M4 implementations.
Unix M4 started to dump core because of the length of the macros that
Autoconf defined, and several bugs showed up in GNU M4 as well.
Eventually, we realized that we needed to use some features that only
GNU M4 has. 4.3BSD M4, in particular, has an impoverished set of
builtin macros; the System V version is better, but still doesn't
provide everything we need.
More development occurred as people put Autoconf under more stresses
(and to uses I hadn't anticipated). Karl Berry added checks for X11.
david zuhn contributed C++ support. François Pinard made it diagnose
invalid arguments. Jim Blandy bravely coerced it into configuring GNU
Emacs, laying the groundwork for several later improvements. Roland
McGrath got it to configure the GNU C Library, wrote the 'autoheader'
script to automate the creation of C header file templates, and added a
'--verbose' option to 'configure'. Noah Friedman added the
'--autoconf-dir' option and 'AC_MACRODIR' environment variable. (He
also coined the term "autoconfiscate" to mean "adapt a software package
to use Autoconf".) Roland and Noah improved the quoting protection in
'AC_DEFINE' and fixed many bugs, especially when I got sick of dealing
with portability problems from February through June, 1993.
File: autoconf.info, Node: Deuteronomy, Prev: Numbers, Up: History
21.5 Deuteronomy
================
A long wish list for major features had accumulated, and the effect of
several years of patching by various people had left some residual
cruft. In April 1994, while working for Cygnus Support, I began a major
revision of Autoconf. I added most of the features of the Cygnus
'configure' that Autoconf had lacked, largely by adapting the relevant
parts of Cygnus 'configure' with the help of david zuhn and Ken Raeburn.
These features include support for using 'config.sub', 'config.guess',
'--host', and '--target'; making links to files; and running 'configure'
scripts in subdirectories. Adding these features enabled Ken to convert
GNU 'as', and Rob Savoye to convert DejaGNU, to using Autoconf.
I added more features in response to other peoples' requests. Many
people had asked for 'configure' scripts to share the results of the
checks between runs, because (particularly when configuring a large
source tree, like Cygnus does) they were frustratingly slow. Mike
Haertel suggested adding site-specific initialization scripts. People
distributing software that had to unpack on MS-DOS asked for a way to
override the '.in' extension on the file names, which produced file
names like 'config.h.in' containing two dots. Jim Avera did an
extensive examination of the problems with quoting in 'AC_DEFINE' and
'AC_SUBST'; his insights led to significant improvements. Richard
Stallman asked that compiler output be sent to 'config.log' instead of
'/dev/null', to help people debug the Emacs 'configure' script.
I made some other changes because of my dissatisfaction with the
quality of the program. I made the messages showing results of the
checks less ambiguous, always printing a result. I regularized the
names of the macros and cleaned up coding style inconsistencies. I
added some auxiliary utilities that I had developed to help convert
source code packages to use Autoconf. With the help of François Pinard,
I made the macros not interrupt each others' messages. (That feature
revealed some performance bottlenecks in GNU M4, which he hastily
corrected!) I reorganized the documentation around problems people want
to solve. And I began a test suite, because experience had shown that
Autoconf has a pronounced tendency to regress when we change it.
Again, several alpha testers gave invaluable feedback, especially
François Pinard, Jim Meyering, Karl Berry, Rob Savoye, Ken Raeburn, and
Mark Eichin.
Finally, version 2.0 was ready. And there was much rejoicing. (And
I have free time again. I think. Yeah, right.)
File: autoconf.info, Node: GNU Free Documentation License, Next: Indices, Prev: History, Up: Top
Appendix A GNU Free Documentation License
*****************************************
Version 1.3, 3 November 2008
Copyright (C) 2000, 2001, 2002, 2007, 2008 Free Software Foundation, Inc.
<http://fsf.org/>
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
0. PREAMBLE
The purpose of this License is to make a manual, textbook, or other
functional and useful document "free" in the sense of freedom: to
assure everyone the effective freedom to copy and redistribute it,
with or without modifying it, either commercially or
noncommercially. Secondarily, this License preserves for the
author and publisher a way to get credit for their work, while not
being considered responsible for modifications made by others.
This License is a kind of "copyleft", which means that derivative
works of the document must themselves be free in the same sense.
It complements the GNU General Public License, which is a copyleft
license designed for free software.
We have designed this License in order to use it for manuals for
free software, because free software needs free documentation: a
free program should come with manuals providing the same freedoms
that the software does. But this License is not limited to
software manuals; it can be used for any textual work, regardless
of subject matter or whether it is published as a printed book. We
recommend this License principally for works whose purpose is
instruction or reference.
1. APPLICABILITY AND DEFINITIONS
This License applies to any manual or other work, in any medium,
that contains a notice placed by the copyright holder saying it can
be distributed under the terms of this License. Such a notice
grants a world-wide, royalty-free license, unlimited in duration,
to use that work under the conditions stated herein. The
"Document", below, refers to any such manual or work. Any member
of the public is a licensee, and is addressed as "you". You accept
the license if you copy, modify or distribute the work in a way
requiring permission under copyright law.
A "Modified Version" of the Document means any work containing the
Document or a portion of it, either copied verbatim, or with
modifications and/or translated into another language.
A "Secondary Section" is a named appendix or a front-matter section
of the Document that deals exclusively with the relationship of the
publishers or authors of the Document to the Document's overall
subject (or to related matters) and contains nothing that could
fall directly within that overall subject. (Thus, if the Document
is in part a textbook of mathematics, a Secondary Section may not
explain any mathematics.) The relationship could be a matter of
historical connection with the subject or with related matters, or
of legal, commercial, philosophical, ethical or political position
regarding them.
The "Invariant Sections" are certain Secondary Sections whose
titles are designated, as being those of Invariant Sections, in the
notice that says that the Document is released under this License.
If a section does not fit the above definition of Secondary then it
is not allowed to be designated as Invariant. The Document may
contain zero Invariant Sections. If the Document does not identify
any Invariant Sections then there are none.
The "Cover Texts" are certain short passages of text that are
listed, as Front-Cover Texts or Back-Cover Texts, in the notice
that says that the Document is released under this License. A
Front-Cover Text may be at most 5 words, and a Back-Cover Text may
be at most 25 words.
A "Transparent" copy of the Document means a machine-readable copy,
represented in a format whose specification is available to the
general public, that is suitable for revising the document
straightforwardly with generic text editors or (for images composed
of pixels) generic paint programs or (for drawings) some widely
available drawing editor, and that is suitable for input to text
formatters or for automatic translation to a variety of formats
suitable for input to text formatters. A copy made in an otherwise
Transparent file format whose markup, or absence of markup, has
been arranged to thwart or discourage subsequent modification by
readers is not Transparent. An image format is not Transparent if
used for any substantial amount of text. A copy that is not
"Transparent" is called "Opaque".
Examples of suitable formats for Transparent copies include plain
ASCII without markup, Texinfo input format, LaTeX input format,
SGML or XML using a publicly available DTD, and standard-conforming
simple HTML, PostScript or PDF designed for human modification.
Examples of transparent image formats include PNG, XCF and JPG.
Opaque formats include proprietary formats that can be read and
edited only by proprietary word processors, SGML or XML for which
the DTD and/or processing tools are not generally available, and
the machine-generated HTML, PostScript or PDF produced by some word
processors for output purposes only.
The "Title Page" means, for a printed book, the title page itself,
plus such following pages as are needed to hold, legibly, the
material this License requires to appear in the title page. For
works in formats which do not have any title page as such, "Title
Page" means the text near the most prominent appearance of the
work's title, preceding the beginning of the body of the text.
The "publisher" means any person or entity that distributes copies
of the Document to the public.
A section "Entitled XYZ" means a named subunit of the Document
whose title either is precisely XYZ or contains XYZ in parentheses
following text that translates XYZ in another language. (Here XYZ
stands for a specific section name mentioned below, such as
"Acknowledgements", "Dedications", "Endorsements", or "History".)
To "Preserve the Title" of such a section when you modify the
Document means that it remains a section "Entitled XYZ" according
to this definition.
The Document may include Warranty Disclaimers next to the notice
which states that this License applies to the Document. These
Warranty Disclaimers are considered to be included by reference in
this License, but only as regards disclaiming warranties: any other
implication that these Warranty Disclaimers may have is void and
has no effect on the meaning of this License.
2. VERBATIM COPYING
You may copy and distribute the Document in any medium, either
commercially or noncommercially, provided that this License, the
copyright notices, and the license notice saying this License
applies to the Document are reproduced in all copies, and that you
add no other conditions whatsoever to those of this License. You
may not use technical measures to obstruct or control the reading
or further copying of the copies you make or distribute. However,
you may accept compensation in exchange for copies. If you
distribute a large enough number of copies you must also follow the
conditions in section 3.
You may also lend copies, under the same conditions stated above,
and you may publicly display copies.
3. COPYING IN QUANTITY
If you publish printed copies (or copies in media that commonly
have printed covers) of the Document, numbering more than 100, and
the Document's license notice requires Cover Texts, you must
enclose the copies in covers that carry, clearly and legibly, all
these Cover Texts: Front-Cover Texts on the front cover, and
Back-Cover Texts on the back cover. Both covers must also clearly
and legibly identify you as the publisher of these copies. The
front cover must present the full title with all words of the title
equally prominent and visible. You may add other material on the
covers in addition. Copying with changes limited to the covers, as
long as they preserve the title of the Document and satisfy these
conditions, can be treated as verbatim copying in other respects.
If the required texts for either cover are too voluminous to fit
legibly, you should put the first ones listed (as many as fit
reasonably) on the actual cover, and continue the rest onto
adjacent pages.
If you publish or distribute Opaque copies of the Document
numbering more than 100, you must either include a machine-readable
Transparent copy along with each Opaque copy, or state in or with
each Opaque copy a computer-network location from which the general
network-using public has access to download using public-standard
network protocols a complete Transparent copy of the Document, free
of added material. If you use the latter option, you must take
reasonably prudent steps, when you begin distribution of Opaque
copies in quantity, to ensure that this Transparent copy will
remain thus accessible at the stated location until at least one
year after the last time you distribute an Opaque copy (directly or
through your agents or retailers) of that edition to the public.
It is requested, but not required, that you contact the authors of
the Document well before redistributing any large number of copies,
to give them a chance to provide you with an updated version of the
Document.
4. MODIFICATIONS
You may copy and distribute a Modified Version of the Document
under the conditions of sections 2 and 3 above, provided that you
release the Modified Version under precisely this License, with the
Modified Version filling the role of the Document, thus licensing
distribution and modification of the Modified Version to whoever
possesses a copy of it. In addition, you must do these things in
the Modified Version:
A. Use in the Title Page (and on the covers, if any) a title
distinct from that of the Document, and from those of previous
versions (which should, if there were any, be listed in the
History section of the Document). You may use the same title
as a previous version if the original publisher of that
version gives permission.
B. List on the Title Page, as authors, one or more persons or
entities responsible for authorship of the modifications in
the Modified Version, together with at least five of the
principal authors of the Document (all of its principal
authors, if it has fewer than five), unless they release you
from this requirement.
C. State on the Title page the name of the publisher of the
Modified Version, as the publisher.
D. Preserve all the copyright notices of the Document.
E. Add an appropriate copyright notice for your modifications
adjacent to the other copyright notices.
F. Include, immediately after the copyright notices, a license
notice giving the public permission to use the Modified
Version under the terms of this License, in the form shown in
the Addendum below.
G. Preserve in that license notice the full lists of Invariant
Sections and required Cover Texts given in the Document's
license notice.
H. Include an unaltered copy of this License.
I. Preserve the section Entitled "History", Preserve its Title,
and add to it an item stating at least the title, year, new
authors, and publisher of the Modified Version as given on the
Title Page. If there is no section Entitled "History" in the
Document, create one stating the title, year, authors, and
publisher of the Document as given on its Title Page, then add
an item describing the Modified Version as stated in the
previous sentence.
J. Preserve the network location, if any, given in the Document
for public access to a Transparent copy of the Document, and
likewise the network locations given in the Document for
previous versions it was based on. These may be placed in the
"History" section. You may omit a network location for a work
that was published at least four years before the Document
itself, or if the original publisher of the version it refers
to gives permission.
K. For any section Entitled "Acknowledgements" or "Dedications",
Preserve the Title of the section, and preserve in the section
all the substance and tone of each of the contributor
acknowledgements and/or dedications given therein.
L. Preserve all the Invariant Sections of the Document, unaltered
in their text and in their titles. Section numbers or the
equivalent are not considered part of the section titles.
M. Delete any section Entitled "Endorsements". Such a section
may not be included in the Modified Version.
N. Do not retitle any existing section to be Entitled
"Endorsements" or to conflict in title with any Invariant
Section.
O. Preserve any Warranty Disclaimers.
If the Modified Version includes new front-matter sections or
appendices that qualify as Secondary Sections and contain no
material copied from the Document, you may at your option designate
some or all of these sections as invariant. To do this, add their
titles to the list of Invariant Sections in the Modified Version's
license notice. These titles must be distinct from any other
section titles.
You may add a section Entitled "Endorsements", provided it contains
nothing but endorsements of your Modified Version by various
parties--for example, statements of peer review or that the text
has been approved by an organization as the authoritative
definition of a standard.
You may add a passage of up to five words as a Front-Cover Text,
and a passage of up to 25 words as a Back-Cover Text, to the end of
the list of Cover Texts in the Modified Version. Only one passage
of Front-Cover Text and one of Back-Cover Text may be added by (or
through arrangements made by) any one entity. If the Document
already includes a cover text for the same cover, previously added
by you or by arrangement made by the same entity you are acting on
behalf of, you may not add another; but you may replace the old
one, on explicit permission from the previous publisher that added
the old one.
The author(s) and publisher(s) of the Document do not by this
License give permission to use their names for publicity for or to
assert or imply endorsement of any Modified Version.
5. COMBINING DOCUMENTS
You may combine the Document with other documents released under
this License, under the terms defined in section 4 above for
modified versions, provided that you include in the combination all
of the Invariant Sections of all of the original documents,
unmodified, and list them all as Invariant Sections of your
combined work in its license notice, and that you preserve all
their Warranty Disclaimers.
The combined work need only contain one copy of this License, and
multiple identical Invariant Sections may be replaced with a single
copy. If there are multiple Invariant Sections with the same name
but different contents, make the title of each such section unique
by adding at the end of it, in parentheses, the name of the
original author or publisher of that section if known, or else a
unique number. Make the same adjustment to the section titles in
the list of Invariant Sections in the license notice of the
combined work.
In the combination, you must combine any sections Entitled
"History" in the various original documents, forming one section
Entitled "History"; likewise combine any sections Entitled
"Acknowledgements", and any sections Entitled "Dedications". You
must delete all sections Entitled "Endorsements."
6. COLLECTIONS OF DOCUMENTS
You may make a collection consisting of the Document and other
documents released under this License, and replace the individual
copies of this License in the various documents with a single copy
that is included in the collection, provided that you follow the
rules of this License for verbatim copying of each of the documents
in all other respects.
You may extract a single document from such a collection, and
distribute it individually under this License, provided you insert
a copy of this License into the extracted document, and follow this
License in all other respects regarding verbatim copying of that
document.
7. AGGREGATION WITH INDEPENDENT WORKS
A compilation of the Document or its derivatives with other
separate and independent documents or works, in or on a volume of a
storage or distribution medium, is called an "aggregate" if the
copyright resulting from the compilation is not used to limit the
legal rights of the compilation's users beyond what the individual
works permit. When the Document is included in an aggregate, this
License does not apply to the other works in the aggregate which
are not themselves derivative works of the Document.
If the Cover Text requirement of section 3 is applicable to these
copies of the Document, then if the Document is less than one half
of the entire aggregate, the Document's Cover Texts may be placed
on covers that bracket the Document within the aggregate, or the
electronic equivalent of covers if the Document is in electronic
form. Otherwise they must appear on printed covers that bracket
the whole aggregate.
8. TRANSLATION
Translation is considered a kind of modification, so you may
distribute translations of the Document under the terms of section
4. Replacing Invariant Sections with translations requires special
permission from their copyright holders, but you may include
translations of some or all Invariant Sections in addition to the
original versions of these Invariant Sections. You may include a
translation of this License, and all the license notices in the
Document, and any Warranty Disclaimers, provided that you also
include the original English version of this License and the
original versions of those notices and disclaimers. In case of a
disagreement between the translation and the original version of
this License or a notice or disclaimer, the original version will
prevail.
If a section in the Document is Entitled "Acknowledgements",
"Dedications", or "History", the requirement (section 4) to
Preserve its Title (section 1) will typically require changing the
actual title.
9. TERMINATION
You may not copy, modify, sublicense, or distribute the Document
except as expressly provided under this License. Any attempt
otherwise to copy, modify, sublicense, or distribute it is void,
and will automatically terminate your rights under this License.
However, if you cease all violation of this License, then your
license from a particular copyright holder is reinstated (a)
provisionally, unless and until the copyright holder explicitly and
finally terminates your license, and (b) permanently, if the
copyright holder fails to notify you of the violation by some
reasonable means prior to 60 days after the cessation.
Moreover, your license from a particular copyright holder is
reinstated permanently if the copyright holder notifies you of the
violation by some reasonable means, this is the first time you have
received notice of violation of this License (for any work) from
that copyright holder, and you cure the violation prior to 30 days
after your receipt of the notice.
Termination of your rights under this section does not terminate
the licenses of parties who have received copies or rights from you
under this License. If your rights have been terminated and not
permanently reinstated, receipt of a copy of some or all of the
same material does not give you any rights to use it.
10. FUTURE REVISIONS OF THIS LICENSE
The Free Software Foundation may publish new, revised versions of
the GNU Free Documentation License from time to time. Such new
versions will be similar in spirit to the present version, but may
differ in detail to address new problems or concerns. See
<http://www.gnu.org/copyleft/>.
Each version of the License is given a distinguishing version
number. If the Document specifies that a particular numbered
version of this License "or any later version" applies to it, you
have the option of following the terms and conditions either of
that specified version or of any later version that has been
published (not as a draft) by the Free Software Foundation. If the
Document does not specify a version number of this License, you may
choose any version ever published (not as a draft) by the Free
Software Foundation. If the Document specifies that a proxy can
decide which future versions of this License can be used, that
proxy's public statement of acceptance of a version permanently
authorizes you to choose that version for the Document.
11. RELICENSING
"Massive Multiauthor Collaboration Site" (or "MMC Site") means any
World Wide Web server that publishes copyrightable works and also
provides prominent facilities for anybody to edit those works. A
public wiki that anybody can edit is an example of such a server.
A "Massive Multiauthor Collaboration" (or "MMC") contained in the
site means any set of copyrightable works thus published on the MMC
site.
"CC-BY-SA" means the Creative Commons Attribution-Share Alike 3.0
license published by Creative Commons Corporation, a not-for-profit
corporation with a principal place of business in San Francisco,
California, as well as future copyleft versions of that license
published by that same organization.
"Incorporate" means to publish or republish a Document, in whole or
in part, as part of another Document.
An MMC is "eligible for relicensing" if it is licensed under this
License, and if all works that were first published under this
License somewhere other than this MMC, and subsequently
incorporated in whole or in part into the MMC, (1) had no cover
texts or invariant sections, and (2) were thus incorporated prior
to November 1, 2008.
The operator of an MMC Site may republish an MMC contained in the
site under CC-BY-SA on the same site at any time before August 1,
2009, provided the MMC is eligible for relicensing.
ADDENDUM: How to use this License for your documents
====================================================
To use this License in a document you have written, include a copy of
the License in the document and put the following copyright and license
notices just after the title page:
Copyright (C) YEAR YOUR NAME.
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.3
or any later version published by the Free Software Foundation;
with no Invariant Sections, no Front-Cover Texts, and no Back-Cover
Texts. A copy of the license is included in the section entitled ``GNU
Free Documentation License''.
If you have Invariant Sections, Front-Cover Texts and Back-Cover
Texts, replace the "with...Texts." line with this:
with the Invariant Sections being LIST THEIR TITLES, with
the Front-Cover Texts being LIST, and with the Back-Cover Texts
being LIST.
If you have Invariant Sections without Cover Texts, or some other
combination of the three, merge those two alternatives to suit the
situation.
If your document contains nontrivial examples of program code, we
recommend releasing these examples in parallel under your choice of free
software license, such as the GNU General Public License, to permit
their use in free software.
File: autoconf.info, Node: Indices, Prev: GNU Free Documentation License, Up: Top
Appendix B Indices
******************
* Menu:
* Environment Variable Index:: Index of environment variables used
* Output Variable Index:: Index of variables set in output files
* Preprocessor Symbol Index:: Index of C preprocessor symbols defined
* Cache Variable Index:: Index of documented cache variables
* Autoconf Macro Index:: Index of Autoconf macros
* M4 Macro Index:: Index of M4, M4sugar, and M4sh macros
* Autotest Macro Index:: Index of Autotest macros
* Program & Function Index:: Index of those with portability problems
* Concept Index:: General index
File: autoconf.info, Node: Environment Variable Index, Next: Output Variable Index, Up: Indices
B.1 Environment Variable Index
==============================
This is an alphabetical list of the environment variables that might
influence Autoconf checks.
[index ]
* Menu:
* _: Special Shell Variables.
(line 36)
* BIN_SH: Special Shell Variables.
(line 40)
* CC: C Compiler. (line 61)
* CDPATH: Special Shell Variables.
(line 44)
* CFLAGS: Preset Output Variables.
(line 23)
* CFLAGS <1>: C Compiler. (line 61)
* CLICOLOR_FORCE: Special Shell Variables.
(line 67)
* CONFIG_COMMANDS: Obsolete config.status Use.
(line 11)
* CONFIG_FILES: Obsolete config.status Use.
(line 15)
* CONFIG_HEADERS: Obsolete config.status Use.
(line 20)
* CONFIG_LINKS: Obsolete config.status Use.
(line 25)
* CONFIG_SHELL: config.status Invocation.
(line 101)
* CONFIG_SITE: Site Defaults. (line 10)
* CONFIG_STATUS: config.status Invocation.
(line 107)
* CPP: C Compiler. (line 113)
* CPPFLAGS: Preset Output Variables.
(line 71)
* CXX: C++ Compiler. (line 7)
* CXXCPP: C++ Compiler. (line 34)
* CXXFLAGS: Preset Output Variables.
(line 93)
* CXXFLAGS <1>: C++ Compiler. (line 7)
* CYGWIN: Obsolete Macros. (line 124)
* DUALCASE: Special Shell Variables.
(line 74)
* ENV: Special Shell Variables.
(line 84)
* ERL: Erlang Compiler and Interpreter.
(line 29)
* ERLC: Erlang Compiler and Interpreter.
(line 10)
* ERLCFLAGS: Preset Output Variables.
(line 119)
* ERLCFLAGS <1>: Erlang Compiler and Interpreter.
(line 10)
* F77: Fortran Compiler. (line 19)
* FC: Fortran Compiler. (line 44)
* FCFLAGS: Preset Output Variables.
(line 125)
* FCFLAGS <1>: Fortran Compiler. (line 44)
* FFLAGS: Preset Output Variables.
(line 132)
* FFLAGS <1>: Fortran Compiler. (line 19)
* FPATH: Special Shell Variables.
(line 100)
* GOFLAGS: Preset Output Variables.
(line 169)
* GREP_OPTIONS: Special Shell Variables.
(line 107)
* IFS: Special Shell Variables.
(line 115)
* LANG: Special Shell Variables.
(line 159)
* LANGUAGE: Special Shell Variables.
(line 167)
* LC_ADDRESS: Special Shell Variables.
(line 178)
* LC_ALL: Initialization Macros.
(line 14)
* LC_ALL <1>: Special Shell Variables.
(line 159)
* LC_COLLATE: Special Shell Variables.
(line 159)
* LC_CTYPE: Special Shell Variables.
(line 159)
* LC_IDENTIFICATION: Special Shell Variables.
(line 178)
* LC_MEASUREMENT: Special Shell Variables.
(line 178)
* LC_MESSAGES: Special Shell Variables.
(line 159)
* LC_MONETARY: Special Shell Variables.
(line 159)
* LC_NAME: Special Shell Variables.
(line 178)
* LC_NUMERIC: Special Shell Variables.
(line 159)
* LC_PAPER: Special Shell Variables.
(line 178)
* LC_TELEPHONE: Special Shell Variables.
(line 178)
* LC_TIME: Special Shell Variables.
(line 159)
* LDFLAGS: Preset Output Variables.
(line 139)
* LIBS: Preset Output Variables.
(line 153)
* LINENO: Initialization Macros.
(line 67)
* LINENO <1>: Special Shell Variables.
(line 184)
* M4: autom4te Invocation. (line 10)
* MAIL: Special Shell Variables.
(line 84)
* MAILPATH: Special Shell Variables.
(line 84)
* NULLCMD: Special Shell Variables.
(line 313)
* OBJC: Objective C Compiler.
(line 7)
* OBJCFLAGS: Preset Output Variables.
(line 161)
* OBJCFLAGS <1>: Objective C Compiler.
(line 7)
* OBJCPP: Objective C Compiler.
(line 26)
* OBJCXX: Objective C++ Compiler.
(line 7)
* OBJCXXCPP: Objective C++ Compiler.
(line 27)
* OBJCXXFLAGS: Preset Output Variables.
(line 165)
* OBJCXXFLAGS <1>: Objective C++ Compiler.
(line 7)
* options: Special Shell Variables.
(line 320)
* PATH_SEPARATOR: Special Shell Variables.
(line 324)
* POSIXLY_CORRECT: Special Shell Variables.
(line 333)
* PS1: Special Shell Variables.
(line 84)
* PS2: Special Shell Variables.
(line 84)
* PS4: Special Shell Variables.
(line 84)
* PWD: Special Shell Variables.
(line 348)
* RANDOM: Special Shell Variables.
(line 357)
* SHELL: Initialization Macros.
(line 14)
* SIMPLE_BACKUP_SUFFIX: autoupdate Invocation.
(line 16)
* status: Special Shell Variables.
(line 365)
* TMPDIR: Initialization Macros.
(line 77)
* WARNINGS: autoconf Invocation. (line 62)
* WARNINGS <1>: autoreconf Invocation.
(line 97)
* WARNINGS <2>: autoheader Invocation.
(line 82)
* WARNINGS <3>: autom4te Invocation. (line 58)
* XMKMF: System Services. (line 10)
* YACC: Particular Programs. (line 199)
* YFLAGS: Particular Programs. (line 199)
File: autoconf.info, Node: Output Variable Index, Next: Preprocessor Symbol Index, Prev: Environment Variable Index, Up: Indices
B.2 Output Variable Index
=========================
This is an alphabetical list of the variables that Autoconf can
substitute into files that it creates, typically one or more makefiles.
*Note Setting Output Variables::, for more information on how this is
done.
[index ]
* Menu:
* abs_builddir: Preset Output Variables.
(line 176)
* abs_srcdir: Preset Output Variables.
(line 198)
* abs_top_builddir: Preset Output Variables.
(line 191)
* abs_top_srcdir: Preset Output Variables.
(line 205)
* ac_empty: Fortran Compiler. (line 468)
* ALLOCA: Particular Functions.
(line 10)
* AWK: Particular Programs. (line 10)
* bindir: Installation Directory Variables.
(line 15)
* build: Canonicalizing. (line 26)
* builddir: Preset Output Variables.
(line 173)
* build_alias: Canonicalizing. (line 9)
* build_cpu: Canonicalizing. (line 26)
* build_os: Canonicalizing. (line 26)
* build_vendor: Canonicalizing. (line 26)
* CC: C Compiler. (line 61)
* CC <1>: C Compiler. (line 361)
* CC <2>: System Services. (line 48)
* CFLAGS: Preset Output Variables.
(line 23)
* CFLAGS <1>: C Compiler. (line 61)
* configure_input: Preset Output Variables.
(line 57)
* CPP: C Compiler. (line 113)
* CPP <1>: C Compiler. (line 126)
* CPPFLAGS: Preset Output Variables.
(line 71)
* cross_compiling: Runtime. (line 71)
* CXX: C++ Compiler. (line 7)
* CXXCPP: C++ Compiler. (line 34)
* CXXFLAGS: Preset Output Variables.
(line 93)
* CXXFLAGS <1>: C++ Compiler. (line 7)
* datadir: Installation Directory Variables.
(line 18)
* datarootdir: Installation Directory Variables.
(line 22)
* DEFS: Preset Output Variables.
(line 97)
* docdir: Installation Directory Variables.
(line 26)
* dvidir: Installation Directory Variables.
(line 30)
* ECHO_C: Preset Output Variables.
(line 107)
* ECHO_N: Preset Output Variables.
(line 107)
* ECHO_T: Preset Output Variables.
(line 107)
* EGREP: Particular Programs. (line 29)
* ERL: Erlang Compiler and Interpreter.
(line 29)
* ERL <1>: Language Choice. (line 40)
* ERL <2>: Running the Compiler.
(line 30)
* ERLANG_ERTS_VER: Erlang Libraries. (line 12)
* ERLANG_INSTALL_LIB_DIR: Installation Directory Variables.
(line 201)
* ERLANG_INSTALL_LIB_DIR <1>: Erlang Libraries. (line 86)
* ERLANG_INSTALL_LIB_DIR_LIBRARY: Installation Directory Variables.
(line 206)
* ERLANG_INSTALL_LIB_DIR_LIBRARY <1>: Erlang Libraries. (line 94)
* ERLANG_LIB_DIR: Erlang Libraries. (line 28)
* ERLANG_LIB_DIR_LIBRARY: Erlang Libraries. (line 36)
* ERLANG_LIB_VER_LIBRARY: Erlang Libraries. (line 36)
* ERLANG_ROOT_DIR: Erlang Libraries. (line 22)
* ERLC: Erlang Compiler and Interpreter.
(line 10)
* ERLC <1>: Language Choice. (line 40)
* ERLCFLAGS: Preset Output Variables.
(line 119)
* ERLCFLAGS <1>: Erlang Compiler and Interpreter.
(line 10)
* ERLCFLAGS <2>: Language Choice. (line 40)
* exec_prefix: Installation Directory Variables.
(line 33)
* EXEEXT: Compilers and Preprocessors.
(line 6)
* EXEEXT <1>: Obsolete Macros. (line 178)
* F77: Fortran Compiler. (line 19)
* FC: Fortran Compiler. (line 44)
* FCFLAGS: Preset Output Variables.
(line 125)
* FCFLAGS <1>: Fortran Compiler. (line 44)
* FCLIBS: Fortran Compiler. (line 91)
* FC_MODEXT: Fortran Compiler. (line 440)
* FC_MODINC: Fortran Compiler. (line 468)
* FC_MODOUT: Fortran Compiler. (line 505)
* FFLAGS: Preset Output Variables.
(line 132)
* FFLAGS <1>: Fortran Compiler. (line 19)
* FGREP: Particular Programs. (line 36)
* FLIBS: Fortran Compiler. (line 91)
* GETGROUPS_LIBS: Particular Functions.
(line 155)
* GETLOADAVG_LIBS: Particular Functions.
(line 161)
* GOFLAGS: Preset Output Variables.
(line 169)
* GREP: Particular Programs. (line 20)
* host: Canonicalizing. (line 34)
* host_alias: Canonicalizing. (line 9)
* host_cpu: Canonicalizing. (line 34)
* host_os: Canonicalizing. (line 34)
* host_vendor: Canonicalizing. (line 34)
* htmldir: Installation Directory Variables.
(line 40)
* includedir: Installation Directory Variables.
(line 43)
* infodir: Installation Directory Variables.
(line 46)
* INSTALL: Particular Programs. (line 43)
* INSTALL_DATA: Particular Programs. (line 43)
* INSTALL_PROGRAM: Particular Programs. (line 43)
* INSTALL_SCRIPT: Particular Programs. (line 43)
* KMEM_GROUP: Particular Functions.
(line 161)
* LDFLAGS: Preset Output Variables.
(line 139)
* LEX: Particular Programs. (line 114)
* LEXLIB: Particular Programs. (line 114)
* LEX_OUTPUT_ROOT: Particular Programs. (line 114)
* libdir: Installation Directory Variables.
(line 49)
* libexecdir: Installation Directory Variables.
(line 52)
* LIBOBJDIR: AC_LIBOBJ vs LIBOBJS.
(line 35)
* LIBOBJS: Particular Functions.
(line 161)
* LIBOBJS <1>: Particular Functions.
(line 286)
* LIBOBJS <2>: Particular Functions.
(line 299)
* LIBOBJS <3>: Generic Functions. (line 56)
* LIBOBJS <4>: Generic Functions. (line 117)
* LIBOBJS <5>: Particular Structures.
(line 26)
* LIBS: Preset Output Variables.
(line 153)
* LIBS <1>: Obsolete Macros. (line 295)
* LIBS <2>: Obsolete Macros. (line 489)
* LIBS <3>: Obsolete Macros. (line 722)
* LN_S: Particular Programs. (line 167)
* localedir: Installation Directory Variables.
(line 55)
* localstatedir: Installation Directory Variables.
(line 60)
* mandir: Installation Directory Variables.
(line 63)
* MKDIR_P: Particular Programs. (line 80)
* NEED_SETGID: Particular Functions.
(line 161)
* OBJC: Objective C Compiler.
(line 7)
* OBJCFLAGS: Preset Output Variables.
(line 161)
* OBJCFLAGS <1>: Objective C Compiler.
(line 7)
* OBJCPP: Objective C Compiler.
(line 26)
* OBJCXX: Objective C++ Compiler.
(line 7)
* OBJCXXCPP: Objective C++ Compiler.
(line 27)
* OBJCXXFLAGS: Preset Output Variables.
(line 165)
* OBJCXXFLAGS <1>: Objective C++ Compiler.
(line 7)
* OBJEXT: Compilers and Preprocessors.
(line 10)
* OBJEXT <1>: Obsolete Macros. (line 384)
* oldincludedir: Installation Directory Variables.
(line 66)
* OPENMP_CFLAGS: Generic Compiler Characteristics.
(line 64)
* OPENMP_CXXFLAGS: Generic Compiler Characteristics.
(line 64)
* OPENMP_FCFLAGS: Generic Compiler Characteristics.
(line 64)
* OPENMP_FFLAGS: Generic Compiler Characteristics.
(line 64)
* PACKAGE_BUGREPORT: Initializing configure.
(line 57)
* PACKAGE_NAME: Initializing configure.
(line 45)
* PACKAGE_STRING: Initializing configure.
(line 54)
* PACKAGE_TARNAME: Initializing configure.
(line 48)
* PACKAGE_URL: Initializing configure.
(line 61)
* PACKAGE_VERSION: Initializing configure.
(line 51)
* pdfdir: Installation Directory Variables.
(line 69)
* POW_LIB: Particular Functions.
(line 407)
* prefix: Installation Directory Variables.
(line 72)
* program_transform_name: Transforming Names. (line 11)
* psdir: Installation Directory Variables.
(line 77)
* RANLIB: Particular Programs. (line 186)
* sbindir: Installation Directory Variables.
(line 80)
* SED: Particular Programs. (line 190)
* SET_MAKE: Output. (line 45)
* sharedstatedir: Installation Directory Variables.
(line 84)
* srcdir: Preset Output Variables.
(line 194)
* subdirs: Subdirectories. (line 12)
* sysconfdir: Installation Directory Variables.
(line 88)
* target: Canonicalizing. (line 41)
* target_alias: Canonicalizing. (line 9)
* target_cpu: Canonicalizing. (line 41)
* target_os: Canonicalizing. (line 41)
* target_vendor: Canonicalizing. (line 41)
* tmp: Initialization Macros.
(line 77)
* top_builddir: Preset Output Variables.
(line 179)
* top_build_prefix: Preset Output Variables.
(line 183)
* top_srcdir: Preset Output Variables.
(line 201)
* X_CFLAGS: System Services. (line 30)
* X_EXTRA_LIBS: System Services. (line 30)
* X_LIBS: System Services. (line 30)
* X_PRE_LIBS: System Services. (line 30)
* YACC: Particular Programs. (line 199)
File: autoconf.info, Node: Preprocessor Symbol Index, Next: Cache Variable Index, Prev: Output Variable Index, Up: Indices
B.3 Preprocessor Symbol Index
=============================
This is an alphabetical list of the C preprocessor symbols that the
Autoconf macros define. To work with Autoconf, C source code needs to
use these names in '#if' or '#ifdef' directives.
[index ]
* Menu:
* _ALL_SOURCE: Posix Variants. (line 10)
* _ALL_SOURCE <1>: Obsolete Macros. (line 20)
* _FILE_OFFSET_BITS: System Services. (line 48)
* _GNU_SOURCE: Posix Variants. (line 10)
* _GNU_SOURCE <1>: Obsolete Macros. (line 234)
* _LARGEFILE_SOURCE: Particular Functions.
(line 147)
* _LARGE_FILES: System Services. (line 48)
* _MINIX: Posix Variants. (line 10)
* _MINIX <1>: Obsolete Macros. (line 371)
* _OPENMP: Generic Compiler Characteristics.
(line 64)
* _POSIX_1_SOURCE: Posix Variants. (line 10)
* _POSIX_1_SOURCE <1>: Obsolete Macros. (line 371)
* _POSIX_PTHREAD_SEMANTICS: Posix Variants. (line 10)
* _POSIX_SOURCE: Posix Variants. (line 10)
* _POSIX_SOURCE <1>: Obsolete Macros. (line 371)
* _POSIX_VERSION: Particular Headers. (line 227)
* _TANDEM_SOURCE: Posix Variants. (line 10)
* __CHAR_UNSIGNED__: C Compiler. (line 291)
* __EXTENSIONS__: Posix Variants. (line 10)
* __PROTOTYPES: C Compiler. (line 351)
* ALIGNOF_TYPE: Generic Compiler Characteristics.
(line 30)
* CLOSEDIR_VOID: Particular Functions.
(line 69)
* const: C Compiler. (line 217)
* CXX_NO_MINUS_C_MINUS_O: C++ Compiler. (line 47)
* C_ALLOCA: Particular Functions.
(line 10)
* C_GETLOADAVG: Particular Functions.
(line 161)
* DGUX: Particular Functions.
(line 161)
* DIRENT: Obsolete Macros. (line 158)
* F77_DUMMY_MAIN: Fortran Compiler. (line 129)
* F77_FUNC: Fortran Compiler. (line 199)
* F77_FUNC_: Fortran Compiler. (line 199)
* F77_MAIN: Fortran Compiler. (line 174)
* F77_NO_MINUS_C_MINUS_O: Fortran Compiler. (line 75)
* FC_DUMMY_MAIN: Fortran Compiler. (line 129)
* FC_FUNC: Fortran Compiler. (line 199)
* FC_FUNC_: Fortran Compiler. (line 199)
* FC_MAIN: Fortran Compiler. (line 174)
* FC_NO_MINUS_C_MINUS_O: Fortran Compiler. (line 75)
* FLEXIBLE_ARRAY_MEMBER: C Compiler. (line 315)
* GETGROUPS_T: Particular Types. (line 14)
* GETLOADAVG_PRIVILEGED: Particular Functions.
(line 161)
* GETPGRP_VOID: Particular Functions.
(line 205)
* gid_t: Particular Types. (line 126)
* GWINSZ_IN_SYS_IOCTL: Particular Headers. (line 269)
* HAVE_AGGREGATE_MEMBER: Generic Structures. (line 29)
* HAVE_ALLOCA_H: Particular Functions.
(line 10)
* HAVE_CHOWN: Particular Functions.
(line 63)
* HAVE_CONFIG_H: Configuration Headers.
(line 33)
* HAVE_C_BACKSLASH_A: C Compiler. (line 176)
* HAVE_C_VARARRAYS: C Compiler. (line 339)
* HAVE_DECL_STRERROR_R: Particular Functions.
(line 388)
* HAVE_DECL_SYMBOL: Generic Declarations.
(line 34)
* HAVE_DECL_SYMBOL <1>: Generic Declarations.
(line 79)
* HAVE_DECL_TZNAME: Particular Structures.
(line 43)
* HAVE_DIRENT_H: Particular Headers. (line 25)
* HAVE_DOPRNT: Particular Functions.
(line 442)
* HAVE_FSEEKO: Particular Functions.
(line 147)
* HAVE_FUNCTION: Generic Functions. (line 27)
* HAVE_FUNCTION <1>: Generic Functions. (line 38)
* HAVE_FUNCTION <2>: Generic Functions. (line 117)
* HAVE_GETGROUPS: Particular Functions.
(line 155)
* HAVE_GETMNTENT: Particular Functions.
(line 195)
* HAVE_HEADER: Generic Headers. (line 46)
* HAVE_HEADER <1>: Generic Headers. (line 87)
* HAVE_INT16_T: Particular Types. (line 40)
* HAVE_INT32_T: Particular Types. (line 43)
* HAVE_INT64_T: Particular Types. (line 46)
* HAVE_INT8_T: Particular Types. (line 21)
* HAVE_INTMAX_T: Particular Types. (line 49)
* HAVE_INTPTR_T: Particular Types. (line 54)
* HAVE_LONG_DOUBLE: Particular Types. (line 59)
* HAVE_LONG_DOUBLE <1>: Obsolete Macros. (line 33)
* HAVE_LONG_DOUBLE_WIDER: Particular Types. (line 70)
* HAVE_LONG_FILE_NAMES: System Services. (line 70)
* HAVE_LONG_LONG_INT: Particular Types. (line 78)
* HAVE_LSTAT_EMPTY_STRING_BUG: Particular Functions.
(line 363)
* HAVE_MALLOC: Particular Functions.
(line 247)
* HAVE_MBRTOWC: Particular Functions.
(line 279)
* HAVE_MMAP: Particular Functions.
(line 311)
* HAVE_NDIR_H: Particular Headers. (line 25)
* HAVE_NLIST_H: Particular Functions.
(line 161)
* HAVE_OBSTACK: Particular Functions.
(line 319)
* HAVE_REALLOC: Particular Functions.
(line 326)
* HAVE_RESOLV_H: Particular Headers. (line 73)
* HAVE_RESTARTABLE_SYSCALLS: Obsolete Macros. (line 548)
* HAVE_STAT_EMPTY_STRING_BUG: Particular Functions.
(line 363)
* HAVE_STDBOOL_H: Particular Headers. (line 101)
* HAVE_STRCOLL: Particular Functions.
(line 379)
* HAVE_STRERROR_R: Particular Functions.
(line 388)
* HAVE_STRFTIME: Particular Functions.
(line 400)
* HAVE_STRINGIZE: C Compiler. (line 305)
* HAVE_STRNLEN: Particular Functions.
(line 425)
* HAVE_STRTOLD: Particular Functions.
(line 419)
* HAVE_STRUCT_DIRENT_D_INO: Particular Structures.
(line 9)
* HAVE_STRUCT_DIRENT_D_TYPE: Particular Structures.
(line 21)
* HAVE_STRUCT_STAT_ST_BLKSIZE: Obsolete Macros. (line 521)
* HAVE_STRUCT_STAT_ST_BLOCKS: Particular Structures.
(line 26)
* HAVE_STRUCT_STAT_ST_RDEV: Obsolete Macros. (line 530)
* HAVE_STRUCT_TM_TM_ZONE: Particular Structures.
(line 43)
* HAVE_ST_BLKSIZE: Obsolete Macros. (line 521)
* HAVE_ST_BLOCKS: Particular Structures.
(line 26)
* HAVE_ST_RDEV: Obsolete Macros. (line 530)
* HAVE_SYS_DIR_H: Particular Headers. (line 25)
* HAVE_SYS_NDIR_H: Particular Headers. (line 25)
* HAVE_SYS_WAIT_H: Particular Headers. (line 203)
* HAVE_TM_ZONE: Particular Structures.
(line 43)
* HAVE_TYPE: Generic Types. (line 27)
* HAVE_TYPEOF: C Compiler. (line 345)
* HAVE_TZNAME: Particular Structures.
(line 43)
* HAVE_UINT16_T: Particular Types. (line 138)
* HAVE_UINT32_T: Particular Types. (line 141)
* HAVE_UINT64_T: Particular Types. (line 144)
* HAVE_UINT8_T: Particular Types. (line 132)
* HAVE_UINTMAX_T: Particular Types. (line 147)
* HAVE_UINTPTR_T: Particular Types. (line 152)
* HAVE_UNSIGNED_LONG_LONG_INT: Particular Types. (line 157)
* HAVE_UTIME_NULL: Particular Functions.
(line 432)
* HAVE_VFORK_H: Particular Functions.
(line 120)
* HAVE_VPRINTF: Particular Functions.
(line 442)
* HAVE_WAIT3: Obsolete Macros. (line 216)
* HAVE_WORKING_FORK: Particular Functions.
(line 120)
* HAVE_WORKING_VFORK: Particular Functions.
(line 120)
* HAVE__BOOL: Particular Headers. (line 10)
* HAVE__BOOL <1>: Particular Headers. (line 101)
* inline: C Compiler. (line 286)
* int16_t: Particular Types. (line 40)
* int32_t: Particular Types. (line 43)
* int64_t: Particular Types. (line 46)
* int8_t: Particular Types. (line 21)
* intmax_t: Particular Types. (line 49)
* intptr_t: Particular Types. (line 54)
* INT_16_BITS: Obsolete Macros. (line 275)
* LONG_64_BITS: Obsolete Macros. (line 337)
* LSTAT_FOLLOWS_SLASHED_SYMLINK: Particular Functions.
(line 228)
* MAJOR_IN_MKDEV: Particular Headers. (line 68)
* MAJOR_IN_SYSMACROS: Particular Headers. (line 68)
* malloc: Particular Functions.
(line 247)
* mbstate_t: Particular Types. (line 88)
* mode_t: Particular Types. (line 96)
* NDEBUG: Particular Headers. (line 20)
* NDIR: Obsolete Macros. (line 158)
* NEED_MEMORY_H: Obsolete Macros. (line 358)
* NEED_SETGID: Particular Functions.
(line 161)
* NLIST_NAME_UNION: Particular Functions.
(line 161)
* NO_MINUS_C_MINUS_O: C Compiler. (line 102)
* off_t: Particular Types. (line 102)
* PACKAGE_BUGREPORT: Initializing configure.
(line 57)
* PACKAGE_NAME: Initializing configure.
(line 45)
* PACKAGE_STRING: Initializing configure.
(line 54)
* PACKAGE_TARNAME: Initializing configure.
(line 48)
* PACKAGE_URL: Initializing configure.
(line 61)
* PACKAGE_VERSION: Initializing configure.
(line 51)
* PARAMS: C Compiler. (line 351)
* pid_t: Particular Types. (line 108)
* PROTOTYPES: C Compiler. (line 351)
* realloc: Particular Functions.
(line 326)
* restrict: C Compiler. (line 247)
* RETSIGTYPE: Obsolete Macros. (line 662)
* SELECT_TYPE_ARG1: Particular Functions.
(line 337)
* SELECT_TYPE_ARG234: Particular Functions.
(line 337)
* SELECT_TYPE_ARG5: Particular Functions.
(line 337)
* SETPGRP_VOID: Particular Functions.
(line 348)
* SETVBUF_REVERSED: Obsolete Macros. (line 208)
* SIZEOF_TYPE-OR-EXPR: Generic Compiler Characteristics.
(line 8)
* size_t: Particular Types. (line 114)
* ssize_t: Particular Types. (line 120)
* STAT_MACROS_BROKEN: Particular Headers. (line 92)
* STDC_HEADERS: Particular Headers. (line 135)
* STRERROR_R_CHAR_P: Particular Functions.
(line 388)
* SVR4: Particular Functions.
(line 161)
* SYSDIR: Obsolete Macros. (line 158)
* SYSNDIR: Obsolete Macros. (line 158)
* SYS_SIGLIST_DECLARED: Obsolete Macros. (line 141)
* TIME_WITH_SYS_TIME: Particular Headers. (line 243)
* TM_IN_SYS_TIME: Particular Structures.
(line 35)
* typeof: C Compiler. (line 345)
* uid_t: Particular Types. (line 126)
* uint16_t: Particular Types. (line 138)
* uint32_t: Particular Types. (line 141)
* uint64_t: Particular Types. (line 144)
* uint8_t: Particular Types. (line 132)
* uintmax_t: Particular Types. (line 147)
* uintptr_t: Particular Types. (line 152)
* UMAX: Particular Functions.
(line 161)
* UMAX4_3: Particular Functions.
(line 161)
* USG: Obsolete Macros. (line 685)
* VARIABLE: Defining Symbols. (line 32)
* VARIABLE <1>: Defining Symbols. (line 74)
* vfork: Particular Functions.
(line 120)
* volatile: C Compiler. (line 265)
* WORDS_BIGENDIAN: C Compiler. (line 184)
* X_DISPLAY_MISSING: System Services. (line 30)
* YYTEXT_POINTER: Particular Programs. (line 114)
File: autoconf.info, Node: Cache Variable Index, Next: Autoconf Macro Index, Prev: Preprocessor Symbol Index, Up: Indices
B.4 Cache Variable Index
========================
This is an alphabetical list of documented cache variables used by
macros defined in Autoconf. Autoconf macros may use additional cache
variables internally.
[index ]
* Menu:
* ac_cv_alignof_TYPE-OR-EXPR: Generic Compiler Characteristics.
(line 30)
* ac_cv_c_const: C Compiler. (line 217)
* ac_cv_c_int16_t: Particular Types. (line 40)
* ac_cv_c_int32_t: Particular Types. (line 43)
* ac_cv_c_int64_t: Particular Types. (line 46)
* ac_cv_c_int8_t: Particular Types. (line 21)
* ac_cv_c_restrict: C Compiler. (line 247)
* ac_cv_c_uint16_t: Particular Types. (line 138)
* ac_cv_c_uint32_t: Particular Types. (line 141)
* ac_cv_c_uint64_t: Particular Types. (line 144)
* ac_cv_c_uint8_t: Particular Types. (line 132)
* ac_cv_f77_compiler_gnu: Fortran Compiler. (line 19)
* ac_cv_f77_dummy_main: Fortran Compiler. (line 129)
* ac_cv_f77_implicit_none: Fortran Compiler. (line 428)
* ac_cv_f77_libs: Fortran Compiler. (line 91)
* ac_cv_f77_main: Fortran Compiler. (line 174)
* ac_cv_f77_mangling: Fortran Compiler. (line 199)
* ac_cv_fc_check_bounds: Fortran Compiler. (line 413)
* ac_cv_fc_compiler_gnu: Fortran Compiler. (line 44)
* ac_cv_fc_dummy_main: Fortran Compiler. (line 129)
* ac_cv_fc_fixedform: Fortran Compiler. (line 373)
* ac_cv_fc_freeform: Fortran Compiler. (line 348)
* ac_cv_fc_implicit_none: Fortran Compiler. (line 428)
* ac_cv_fc_libs: Fortran Compiler. (line 91)
* ac_cv_fc_line_length: Fortran Compiler. (line 395)
* ac_cv_fc_main: Fortran Compiler. (line 174)
* ac_cv_fc_mangling: Fortran Compiler. (line 199)
* ac_cv_fc_module_ext: Fortran Compiler. (line 440)
* ac_cv_fc_module_flag: Fortran Compiler. (line 468)
* ac_cv_fc_module_output_flag: Fortran Compiler. (line 505)
* ac_cv_fc_pp_define: Fortran Compiler. (line 332)
* ac_cv_fc_pp_srcext_EXT: Fortran Compiler. (line 275)
* ac_cv_fc_srcext_EXT: Fortran Compiler. (line 275)
* ac_cv_file_FILE: Files. (line 13)
* ac_cv_file_FILE <1>: Files. (line 21)
* ac_cv_func_chown_works: Particular Functions.
(line 63)
* ac_cv_func_closedir_void: Particular Functions.
(line 69)
* ac_cv_func_fnmatch_gnu: Particular Functions.
(line 109)
* ac_cv_func_fnmatch_works: Particular Functions.
(line 94)
* ac_cv_func_fnmatch_works <1>: Particular Functions.
(line 451)
* ac_cv_func_FUNCTION: Generic Functions. (line 15)
* ac_cv_func_getgroups_works: Particular Functions.
(line 155)
* ac_cv_func_getpgrp_void: Particular Functions.
(line 205)
* ac_cv_func_lstat_dereferences_slashed_symlink: Particular Functions.
(line 228)
* ac_cv_func_lstat_empty_string_bug: Particular Functions.
(line 363)
* ac_cv_func_malloc_0_nonnull: Particular Functions.
(line 247)
* ac_cv_func_mbrtowc: Particular Functions.
(line 279)
* ac_cv_func_memcmp_working: Particular Functions.
(line 286)
* ac_cv_func_mmap_fixed_mapped: Particular Functions.
(line 311)
* ac_cv_func_obstack: Particular Functions.
(line 319)
* ac_cv_func_pow: Particular Functions.
(line 407)
* ac_cv_func_realloc_0_nonnull: Particular Functions.
(line 326)
* ac_cv_func_setpgrp_void: Particular Functions.
(line 348)
* ac_cv_func_stat_empty_string_bug: Particular Functions.
(line 363)
* ac_cv_func_strcoll_works: Particular Functions.
(line 379)
* ac_cv_func_strerror_r_char_p: Particular Functions.
(line 388)
* ac_cv_func_strnlen_working: Particular Functions.
(line 425)
* ac_cv_func_strtod: Particular Functions.
(line 407)
* ac_cv_func_strtold: Particular Functions.
(line 419)
* ac_cv_func_utime_null: Particular Functions.
(line 432)
* ac_cv_func_working_mktime: Particular Functions.
(line 299)
* ac_cv_have_decl_SYMBOL: Generic Declarations.
(line 11)
* ac_cv_have_decl_SYMBOL <1>: Generic Declarations.
(line 34)
* ac_cv_header_HEADER-FILE: Generic Headers. (line 13)
* ac_cv_header_HEADER-FILE <1>: Generic Headers. (line 46)
* ac_cv_header_stdbool_h: Particular Headers. (line 10)
* ac_cv_header_stdbool_h <1>: Particular Headers. (line 101)
* ac_cv_header_stdc: Particular Headers. (line 135)
* ac_cv_header_sys_wait_h: Particular Headers. (line 203)
* ac_cv_header_time: Particular Headers. (line 243)
* ac_cv_lib_error_at_line: Particular Functions.
(line 84)
* ac_cv_lib_LIBRARY_FUNCTION: Libraries. (line 11)
* ac_cv_member_AGGREGATE_MEMBER: Generic Structures. (line 11)
* ac_cv_member_struct_stat_st_blocks: Particular Structures.
(line 26)
* ac_cv_path_install: Particular Programs. (line 43)
* ac_cv_path_mkdir: Particular Programs. (line 80)
* ac_cv_path_SED: Particular Programs. (line 190)
* ac_cv_path_VARIABLE: Generic Programs. (line 108)
* ac_cv_path_VARIABLE <1>: Generic Programs. (line 115)
* ac_cv_path_VARIABLE <2>: Generic Programs. (line 123)
* ac_cv_prog_AWK: Particular Programs. (line 10)
* ac_cv_prog_cc_c89: C Compiler. (line 61)
* ac_cv_prog_cc_c89 <1>: C Compiler. (line 147)
* ac_cv_prog_cc_c99: C Compiler. (line 161)
* ac_cv_prog_cc_COMPILER_c_o: C Compiler. (line 102)
* ac_cv_prog_cc_stdc: C Compiler. (line 137)
* ac_cv_prog_cxx_openmp: Generic Compiler Characteristics.
(line 64)
* ac_cv_prog_c_openmp: Generic Compiler Characteristics.
(line 64)
* ac_cv_prog_EGREP: Particular Programs. (line 29)
* ac_cv_prog_f77_c_o: Fortran Compiler. (line 75)
* ac_cv_prog_f77_g: Fortran Compiler. (line 19)
* ac_cv_prog_f77_openmp: Generic Compiler Characteristics.
(line 64)
* ac_cv_prog_f77_v: Fortran Compiler. (line 91)
* ac_cv_prog_fc_c_o: Fortran Compiler. (line 75)
* ac_cv_prog_fc_g: Fortran Compiler. (line 44)
* ac_cv_prog_fc_openmp: Generic Compiler Characteristics.
(line 64)
* ac_cv_prog_fc_v: Fortran Compiler. (line 91)
* ac_cv_prog_FGREP: Particular Programs. (line 36)
* ac_cv_prog_GREP: Particular Programs. (line 20)
* ac_cv_prog_LEX: Particular Programs. (line 114)
* ac_cv_prog_VARIABLE: Generic Programs. (line 24)
* ac_cv_prog_VARIABLE <1>: Generic Programs. (line 36)
* ac_cv_prog_YACC: Particular Programs. (line 199)
* ac_cv_search_FUNCTION: Libraries. (line 52)
* ac_cv_search_getmntent: Particular Functions.
(line 195)
* ac_cv_sizeof_TYPE-OR-EXPR: Generic Compiler Characteristics.
(line 8)
* ac_cv_sys_posix_termios: System Services. (line 74)
* ac_cv_type_getgroups: Particular Types. (line 14)
* ac_cv_type_long_double: Particular Types. (line 59)
* ac_cv_type_long_double_wider: Particular Types. (line 70)
* ac_cv_type_long_long_int: Particular Types. (line 78)
* ac_cv_type_mbstate_t: Particular Types. (line 88)
* ac_cv_type_mode_t: Particular Types. (line 96)
* ac_cv_type_off_t: Particular Types. (line 102)
* ac_cv_type_pid_t: Particular Types. (line 108)
* ac_cv_type_size_t: Particular Types. (line 114)
* ac_cv_type_ssize_t: Particular Types. (line 120)
* ac_cv_type_TYPE: Generic Types. (line 11)
* ac_cv_type_uid_t: Particular Types. (line 126)
* ac_cv_type_unsigned_long_long_int: Particular Types. (line 157)
File: autoconf.info, Node: Autoconf Macro Index, Next: M4 Macro Index, Prev: Cache Variable Index, Up: Indices
B.5 Autoconf Macro Index
========================
This is an alphabetical list of the Autoconf macros.
[index ]
* Menu:
* AC_ACT_IFELSE: AC_ACT_IFELSE vs AC_TRY_ACT.
(line 6)
* AC_AIX: Obsolete Macros. (line 20)
* AC_ALLOCA: Obsolete Macros. (line 24)
* AC_ARG_ARRAY: Obsolete Macros. (line 27)
* AC_ARG_ENABLE: Package Options. (line 35)
* AC_ARG_PROGRAM: Transforming Names. (line 11)
* AC_ARG_VAR: Setting Output Variables.
(line 79)
* AC_ARG_WITH: External Software. (line 36)
* AC_AUTOCONF_VERSION: Versioning. (line 21)
* AC_BEFORE: Suggested Ordering. (line 28)
* AC_CACHE_CHECK: Caching Results. (line 29)
* AC_CACHE_LOAD: Cache Checkpointing. (line 13)
* AC_CACHE_SAVE: Cache Checkpointing. (line 17)
* AC_CACHE_VAL: Caching Results. (line 15)
* AC_CANONICAL_BUILD: Canonicalizing. (line 26)
* AC_CANONICAL_HOST: Canonicalizing. (line 34)
* AC_CANONICAL_SYSTEM: Obsolete Macros. (line 41)
* AC_CANONICAL_TARGET: Canonicalizing. (line 41)
* AC_CHAR_UNSIGNED: Obsolete Macros. (line 51)
* AC_CHECKING: Obsolete Macros. (line 101)
* AC_CHECK_ALIGNOF: Generic Compiler Characteristics.
(line 30)
* AC_CHECK_DECL: Generic Declarations.
(line 11)
* AC_CHECK_DECLS: Generic Declarations.
(line 34)
* AC_CHECK_DECLS_ONCE: Generic Declarations.
(line 79)
* AC_CHECK_FILE: Files. (line 13)
* AC_CHECK_FILES: Files. (line 21)
* AC_CHECK_FUNC: Generic Functions. (line 15)
* AC_CHECK_FUNCS: Generic Functions. (line 27)
* AC_CHECK_FUNCS_ONCE: Generic Functions. (line 38)
* AC_CHECK_HEADER: Generic Headers. (line 13)
* AC_CHECK_HEADERS: Generic Headers. (line 46)
* AC_CHECK_HEADERS_ONCE: Generic Headers. (line 87)
* AC_CHECK_HEADER_STDBOOL: Particular Headers. (line 10)
* AC_CHECK_LIB: Libraries. (line 11)
* AC_CHECK_MEMBER: Generic Structures. (line 11)
* AC_CHECK_MEMBERS: Generic Structures. (line 29)
* AC_CHECK_PROG: Generic Programs. (line 24)
* AC_CHECK_PROGS: Generic Programs. (line 36)
* AC_CHECK_SIZEOF: Generic Compiler Characteristics.
(line 8)
* AC_CHECK_TARGET_TOOL: Generic Programs. (line 48)
* AC_CHECK_TARGET_TOOLS: Generic Programs. (line 79)
* AC_CHECK_TOOL: Generic Programs. (line 64)
* AC_CHECK_TOOLS: Generic Programs. (line 92)
* AC_CHECK_TYPE: Generic Types. (line 11)
* AC_CHECK_TYPE <1>: Obsolete Macros. (line 54)
* AC_CHECK_TYPES: Generic Types. (line 27)
* AC_COMPILE_CHECK: Obsolete Macros. (line 109)
* AC_COMPILE_IFELSE: Running the Compiler.
(line 13)
* AC_COMPUTE_INT: Generic Compiler Characteristics.
(line 42)
* AC_CONFIG_AUX_DIR: Input. (line 20)
* AC_CONFIG_COMMANDS: Configuration Commands.
(line 13)
* AC_CONFIG_COMMANDS_POST: Configuration Commands.
(line 41)
* AC_CONFIG_COMMANDS_PRE: Configuration Commands.
(line 35)
* AC_CONFIG_FILES: Configuration Files. (line 9)
* AC_CONFIG_HEADERS: Configuration Headers.
(line 33)
* AC_CONFIG_ITEMS: Configuration Actions.
(line 12)
* AC_CONFIG_LIBOBJ_DIR: Generic Functions. (line 97)
* AC_CONFIG_LINKS: Configuration Links. (line 12)
* AC_CONFIG_MACRO_DIR: Input. (line 47)
* AC_CONFIG_SRCDIR: Input. (line 7)
* AC_CONFIG_SUBDIRS: Subdirectories. (line 12)
* AC_CONFIG_TESTDIR: Making testsuite Scripts.
(line 26)
* AC_CONST: Obsolete Macros. (line 117)
* AC_COPYRIGHT: Notices. (line 10)
* AC_CROSS_CHECK: Obsolete Macros. (line 120)
* AC_CYGWIN: Obsolete Macros. (line 124)
* AC_C_BACKSLASH_A: C Compiler. (line 176)
* AC_C_BIGENDIAN: C Compiler. (line 184)
* AC_C_CHAR_UNSIGNED: C Compiler. (line 291)
* AC_C_CONST: C Compiler. (line 217)
* AC_C_CROSS: Obsolete Macros. (line 30)
* AC_C_FLEXIBLE_ARRAY_MEMBER: C Compiler. (line 315)
* AC_C_INLINE: C Compiler. (line 286)
* AC_C_LONG_DOUBLE: Obsolete Macros. (line 33)
* AC_C_PROTOTYPES: C Compiler. (line 351)
* AC_C_RESTRICT: C Compiler. (line 247)
* AC_C_STRINGIZE: C Compiler. (line 305)
* AC_C_TYPEOF: C Compiler. (line 345)
* AC_C_VARARRAYS: C Compiler. (line 339)
* AC_C_VOLATILE: C Compiler. (line 265)
* AC_DATAROOTDIR_CHECKED: Changed Directory Variables.
(line 58)
* AC_DECL_SYS_SIGLIST: Obsolete Macros. (line 141)
* AC_DECL_YYTEXT: Obsolete Macros. (line 154)
* AC_DEFINE: Defining Symbols. (line 32)
* AC_DEFINE_UNQUOTED: Defining Symbols. (line 74)
* AC_DEFUN: Macro Definitions. (line 7)
* AC_DEFUN_ONCE: One-Shot Macros. (line 14)
* AC_DIAGNOSE: Reporting Messages. (line 18)
* AC_DIR_HEADER: Obsolete Macros. (line 158)
* AC_DISABLE_OPTION_CHECKING: Option Checking. (line 28)
* AC_DYNIX_SEQ: Obsolete Macros. (line 170)
* AC_EGREP_CPP: Running the Preprocessor.
(line 74)
* AC_EGREP_HEADER: Running the Preprocessor.
(line 67)
* AC_EMXOS2: Obsolete Macros. (line 183)
* AC_ENABLE: Obsolete Macros. (line 189)
* AC_ERLANG_CHECK_LIB: Erlang Libraries. (line 36)
* AC_ERLANG_NEED_ERL: Erlang Compiler and Interpreter.
(line 41)
* AC_ERLANG_NEED_ERLC: Erlang Compiler and Interpreter.
(line 24)
* AC_ERLANG_PATH_ERL: Erlang Compiler and Interpreter.
(line 29)
* AC_ERLANG_PATH_ERLC: Erlang Compiler and Interpreter.
(line 10)
* AC_ERLANG_SUBST_ERTS_VER: Erlang Libraries. (line 12)
* AC_ERLANG_SUBST_INSTALL_LIB_DIR: Installation Directory Variables.
(line 201)
* AC_ERLANG_SUBST_INSTALL_LIB_DIR <1>: Erlang Libraries. (line 86)
* AC_ERLANG_SUBST_INSTALL_LIB_SUBDIR: Installation Directory Variables.
(line 206)
* AC_ERLANG_SUBST_INSTALL_LIB_SUBDIR <1>: Erlang Libraries. (line 94)
* AC_ERLANG_SUBST_LIB_DIR: Erlang Libraries. (line 28)
* AC_ERLANG_SUBST_ROOT_DIR: Erlang Libraries. (line 22)
* AC_ERROR: Obsolete Macros. (line 193)
* AC_EXEEXT: Obsolete Macros. (line 178)
* AC_F77_DUMMY_MAIN: Fortran Compiler. (line 129)
* AC_F77_FUNC: Fortran Compiler. (line 262)
* AC_F77_IMPLICIT_NONE: Fortran Compiler. (line 428)
* AC_F77_LIBRARY_LDFLAGS: Fortran Compiler. (line 91)
* AC_F77_MAIN: Fortran Compiler. (line 174)
* AC_F77_WRAPPERS: Fortran Compiler. (line 199)
* AC_FATAL: Reporting Messages. (line 34)
* AC_FC_CHECK_BOUNDS: Fortran Compiler. (line 413)
* AC_FC_DUMMY_MAIN: Fortran Compiler. (line 129)
* AC_FC_FIXEDFORM: Fortran Compiler. (line 373)
* AC_FC_FREEFORM: Fortran Compiler. (line 348)
* AC_FC_FUNC: Fortran Compiler. (line 262)
* AC_FC_IMPLICIT_NONE: Fortran Compiler. (line 428)
* AC_FC_LIBRARY_LDFLAGS: Fortran Compiler. (line 91)
* AC_FC_LINE_LENGTH: Fortran Compiler. (line 395)
* AC_FC_MAIN: Fortran Compiler. (line 174)
* AC_FC_MODULE_EXTENSION: Fortran Compiler. (line 440)
* AC_FC_MODULE_FLAG: Fortran Compiler. (line 468)
* AC_FC_MODULE_OUTPUT_FLAG: Fortran Compiler. (line 505)
* AC_FC_PP_DEFINE: Fortran Compiler. (line 332)
* AC_FC_PP_SRCEXT: Fortran Compiler. (line 275)
* AC_FC_SRCEXT: Fortran Compiler. (line 275)
* AC_FC_WRAPPERS: Fortran Compiler. (line 199)
* AC_FIND_X: Obsolete Macros. (line 196)
* AC_FIND_XTRA: Obsolete Macros. (line 199)
* AC_FOREACH: Obsolete Macros. (line 202)
* AC_FUNC_ALLOCA: Particular Functions.
(line 10)
* AC_FUNC_CHECK: Obsolete Macros. (line 205)
* AC_FUNC_CHOWN: Particular Functions.
(line 63)
* AC_FUNC_CLOSEDIR_VOID: Particular Functions.
(line 69)
* AC_FUNC_ERROR_AT_LINE: Particular Functions.
(line 84)
* AC_FUNC_FNMATCH: Particular Functions.
(line 94)
* AC_FUNC_FNMATCH_GNU: Particular Functions.
(line 109)
* AC_FUNC_FORK: Particular Functions.
(line 120)
* AC_FUNC_FSEEKO: Particular Functions.
(line 147)
* AC_FUNC_GETGROUPS: Particular Functions.
(line 155)
* AC_FUNC_GETLOADAVG: Particular Functions.
(line 161)
* AC_FUNC_GETMNTENT: Particular Functions.
(line 195)
* AC_FUNC_GETPGRP: Particular Functions.
(line 205)
* AC_FUNC_LSTAT: Particular Functions.
(line 363)
* AC_FUNC_LSTAT_FOLLOWS_SLASHED_SYMLINK: Particular Functions.
(line 228)
* AC_FUNC_MALLOC: Particular Functions.
(line 247)
* AC_FUNC_MBRTOWC: Particular Functions.
(line 279)
* AC_FUNC_MEMCMP: Particular Functions.
(line 286)
* AC_FUNC_MKTIME: Particular Functions.
(line 299)
* AC_FUNC_MMAP: Particular Functions.
(line 311)
* AC_FUNC_OBSTACK: Particular Functions.
(line 319)
* AC_FUNC_REALLOC: Particular Functions.
(line 326)
* AC_FUNC_SELECT_ARGTYPES: Particular Functions.
(line 337)
* AC_FUNC_SETPGRP: Particular Functions.
(line 348)
* AC_FUNC_SETVBUF_REVERSED: Obsolete Macros. (line 208)
* AC_FUNC_STAT: Particular Functions.
(line 363)
* AC_FUNC_STRCOLL: Particular Functions.
(line 379)
* AC_FUNC_STRERROR_R: Particular Functions.
(line 388)
* AC_FUNC_STRFTIME: Particular Functions.
(line 400)
* AC_FUNC_STRNLEN: Particular Functions.
(line 425)
* AC_FUNC_STRTOD: Particular Functions.
(line 407)
* AC_FUNC_STRTOLD: Particular Functions.
(line 419)
* AC_FUNC_UTIME_NULL: Particular Functions.
(line 432)
* AC_FUNC_VPRINTF: Particular Functions.
(line 442)
* AC_FUNC_WAIT3: Obsolete Macros. (line 216)
* AC_GCC_TRADITIONAL: Obsolete Macros. (line 224)
* AC_GETGROUPS_T: Obsolete Macros. (line 228)
* AC_GETLOADAVG: Obsolete Macros. (line 231)
* AC_GNU_SOURCE: Obsolete Macros. (line 234)
* AC_HAVE_FUNCS: Obsolete Macros. (line 238)
* AC_HAVE_HEADERS: Obsolete Macros. (line 241)
* AC_HAVE_LIBRARY: Obsolete Macros. (line 245)
* AC_HAVE_POUNDBANG: Obsolete Macros. (line 252)
* AC_HEADER_ASSERT: Particular Headers. (line 20)
* AC_HEADER_CHECK: Obsolete Macros. (line 255)
* AC_HEADER_DIRENT: Particular Headers. (line 25)
* AC_HEADER_EGREP: Obsolete Macros. (line 258)
* AC_HEADER_MAJOR: Particular Headers. (line 68)
* AC_HEADER_RESOLV: Particular Headers. (line 73)
* AC_HEADER_STAT: Particular Headers. (line 92)
* AC_HEADER_STDBOOL: Particular Headers. (line 101)
* AC_HEADER_STDC: Particular Headers. (line 135)
* AC_HEADER_SYS_WAIT: Particular Headers. (line 203)
* AC_HEADER_TIME: Particular Headers. (line 243)
* AC_HEADER_TIOCGWINSZ: Particular Headers. (line 269)
* AC_HELP_STRING: Obsolete Macros. (line 261)
* AC_INCLUDES_DEFAULT: Default Includes. (line 29)
* AC_INIT: Initializing configure.
(line 14)
* AC_INIT <1>: Obsolete Macros. (line 264)
* AC_INLINE: Obsolete Macros. (line 272)
* AC_INT_16_BITS: Obsolete Macros. (line 275)
* AC_IRIX_SUN: Obsolete Macros. (line 279)
* AC_ISC_POSIX: Obsolete Macros. (line 295)
* AC_LANG: Language Choice. (line 14)
* AC_LANG_ASSERT: Language Choice. (line 79)
* AC_LANG_C: Obsolete Macros. (line 302)
* AC_LANG_CALL: Generating Sources. (line 139)
* AC_LANG_CONFTEST: Generating Sources. (line 12)
* AC_LANG_CPLUSPLUS: Obsolete Macros. (line 305)
* AC_LANG_DEFINES_PROVIDED: Generating Sources. (line 30)
* AC_LANG_FORTRAN77: Obsolete Macros. (line 308)
* AC_LANG_FUNC_LINK_TRY: Generating Sources. (line 151)
* AC_LANG_POP: Language Choice. (line 66)
* AC_LANG_PROGRAM: Generating Sources. (line 76)
* AC_LANG_PUSH: Language Choice. (line 61)
* AC_LANG_RESTORE: Obsolete Macros. (line 311)
* AC_LANG_SAVE: Obsolete Macros. (line 317)
* AC_LANG_SOURCE: Generating Sources. (line 39)
* AC_LANG_WERROR: Generic Compiler Characteristics.
(line 54)
* AC_LIBOBJ: Generic Functions. (line 56)
* AC_LIBSOURCE: Generic Functions. (line 65)
* AC_LIBSOURCES: Generic Functions. (line 89)
* AC_LINK_FILES: Obsolete Macros. (line 322)
* AC_LINK_IFELSE: Running the Linker. (line 24)
* AC_LN_S: Obsolete Macros. (line 334)
* AC_LONG_64_BITS: Obsolete Macros. (line 337)
* AC_LONG_DOUBLE: Obsolete Macros. (line 342)
* AC_LONG_FILE_NAMES: Obsolete Macros. (line 350)
* AC_MAJOR_HEADER: Obsolete Macros. (line 355)
* AC_MEMORY_H: Obsolete Macros. (line 358)
* AC_MINGW32: Obsolete Macros. (line 365)
* AC_MINIX: Obsolete Macros. (line 371)
* AC_MINUS_C_MINUS_O: Obsolete Macros. (line 375)
* AC_MMAP: Obsolete Macros. (line 378)
* AC_MODE_T: Obsolete Macros. (line 381)
* AC_MSG_CHECKING: Printing Messages. (line 24)
* AC_MSG_ERROR: Printing Messages. (line 55)
* AC_MSG_FAILURE: Printing Messages. (line 65)
* AC_MSG_NOTICE: Printing Messages. (line 45)
* AC_MSG_RESULT: Printing Messages. (line 35)
* AC_MSG_WARN: Printing Messages. (line 71)
* AC_OBJEXT: Obsolete Macros. (line 384)
* AC_OBSOLETE: Obsolete Macros. (line 390)
* AC_OFF_T: Obsolete Macros. (line 405)
* AC_OPENMP: Generic Compiler Characteristics.
(line 64)
* AC_OUTPUT: Output. (line 13)
* AC_OUTPUT <1>: Obsolete Macros. (line 408)
* AC_OUTPUT_COMMANDS: Obsolete Macros. (line 420)
* AC_PACKAGE_BUGREPORT: Initializing configure.
(line 57)
* AC_PACKAGE_NAME: Initializing configure.
(line 45)
* AC_PACKAGE_STRING: Initializing configure.
(line 54)
* AC_PACKAGE_TARNAME: Initializing configure.
(line 48)
* AC_PACKAGE_URL: Initializing configure.
(line 61)
* AC_PACKAGE_VERSION: Initializing configure.
(line 51)
* AC_PATH_PROG: Generic Programs. (line 108)
* AC_PATH_PROGS: Generic Programs. (line 115)
* AC_PATH_PROGS_FEATURE_CHECK: Generic Programs. (line 123)
* AC_PATH_TARGET_TOOL: Generic Programs. (line 159)
* AC_PATH_TOOL: Generic Programs. (line 164)
* AC_PATH_X: System Services. (line 10)
* AC_PATH_XTRA: System Services. (line 30)
* AC_PID_T: Obsolete Macros. (line 450)
* AC_PREFIX: Obsolete Macros. (line 453)
* AC_PREFIX_DEFAULT: Default Prefix. (line 16)
* AC_PREFIX_PROGRAM: Default Prefix. (line 25)
* AC_PREPROC_IFELSE: Running the Preprocessor.
(line 20)
* AC_PREREQ: Versioning. (line 11)
* AC_PRESERVE_HELP_ORDER: Help Formatting. (line 20)
* AC_PROGRAMS_CHECK: Obsolete Macros. (line 456)
* AC_PROGRAMS_PATH: Obsolete Macros. (line 459)
* AC_PROGRAM_CHECK: Obsolete Macros. (line 462)
* AC_PROGRAM_EGREP: Obsolete Macros. (line 465)
* AC_PROGRAM_PATH: Obsolete Macros. (line 468)
* AC_PROG_AWK: Particular Programs. (line 10)
* AC_PROG_CC: C Compiler. (line 61)
* AC_PROG_CC_C89: C Compiler. (line 147)
* AC_PROG_CC_C99: C Compiler. (line 161)
* AC_PROG_CC_C_O: C Compiler. (line 102)
* AC_PROG_CC_STDC: C Compiler. (line 137)
* AC_PROG_CPP: C Compiler. (line 113)
* AC_PROG_CPP_WERROR: C Compiler. (line 126)
* AC_PROG_CXX: C++ Compiler. (line 7)
* AC_PROG_CXXCPP: C++ Compiler. (line 34)
* AC_PROG_CXX_C_O: C++ Compiler. (line 47)
* AC_PROG_EGREP: Particular Programs. (line 29)
* AC_PROG_F77: Fortran Compiler. (line 19)
* AC_PROG_F77_C_O: Fortran Compiler. (line 75)
* AC_PROG_FC: Fortran Compiler. (line 44)
* AC_PROG_FC_C_O: Fortran Compiler. (line 75)
* AC_PROG_FGREP: Particular Programs. (line 36)
* AC_PROG_GCC_TRADITIONAL: C Compiler. (line 361)
* AC_PROG_GREP: Particular Programs. (line 20)
* AC_PROG_INSTALL: Particular Programs. (line 43)
* AC_PROG_LEX: Particular Programs. (line 114)
* AC_PROG_LN_S: Particular Programs. (line 167)
* AC_PROG_MAKE_SET: Output. (line 45)
* AC_PROG_MKDIR_P: Particular Programs. (line 80)
* AC_PROG_OBJC: Objective C Compiler.
(line 7)
* AC_PROG_OBJCPP: Objective C Compiler.
(line 26)
* AC_PROG_OBJCXX: Objective C++ Compiler.
(line 7)
* AC_PROG_OBJCXXCPP: Objective C++ Compiler.
(line 27)
* AC_PROG_RANLIB: Particular Programs. (line 186)
* AC_PROG_SED: Particular Programs. (line 190)
* AC_PROG_YACC: Particular Programs. (line 199)
* AC_REMOTE_TAPE: Obsolete Macros. (line 471)
* AC_REPLACE_FNMATCH: Particular Functions.
(line 451)
* AC_REPLACE_FUNCS: Generic Functions. (line 117)
* AC_REQUIRE: Prerequisite Macros. (line 17)
* AC_REQUIRE_AUX_FILE: Input. (line 36)
* AC_REQUIRE_CPP: Language Choice. (line 94)
* AC_RESTARTABLE_SYSCALLS: Obsolete Macros. (line 474)
* AC_RETSIGTYPE: Obsolete Macros. (line 482)
* AC_REVISION: Notices. (line 18)
* AC_RSH: Obsolete Macros. (line 486)
* AC_RUN_IFELSE: Runtime. (line 20)
* AC_SCO_INTL: Obsolete Macros. (line 489)
* AC_SEARCH_LIBS: Libraries. (line 52)
* AC_SETVBUF_REVERSED: Obsolete Macros. (line 498)
* AC_SET_MAKE: Obsolete Macros. (line 503)
* AC_SIZEOF_TYPE: Obsolete Macros. (line 506)
* AC_SIZE_T: Obsolete Macros. (line 509)
* AC_STAT_MACROS_BROKEN: Obsolete Macros. (line 512)
* AC_STDC_HEADERS: Obsolete Macros. (line 515)
* AC_STRCOLL: Obsolete Macros. (line 518)
* AC_STRUCT_DIRENT_D_INO: Particular Structures.
(line 9)
* AC_STRUCT_DIRENT_D_TYPE: Particular Structures.
(line 21)
* AC_STRUCT_ST_BLKSIZE: Obsolete Macros. (line 521)
* AC_STRUCT_ST_BLOCKS: Particular Structures.
(line 26)
* AC_STRUCT_ST_RDEV: Obsolete Macros. (line 530)
* AC_STRUCT_TIMEZONE: Particular Structures.
(line 43)
* AC_STRUCT_TM: Particular Structures.
(line 35)
* AC_ST_BLKSIZE: Obsolete Macros. (line 539)
* AC_ST_BLOCKS: Obsolete Macros. (line 542)
* AC_ST_RDEV: Obsolete Macros. (line 545)
* AC_SUBST: Setting Output Variables.
(line 13)
* AC_SUBST_FILE: Setting Output Variables.
(line 38)
* AC_SYS_INTERPRETER: System Services. (line 41)
* AC_SYS_LARGEFILE: System Services. (line 48)
* AC_SYS_LONG_FILE_NAMES: System Services. (line 70)
* AC_SYS_POSIX_TERMIOS: System Services. (line 74)
* AC_SYS_RESTARTABLE_SYSCALLS: Obsolete Macros. (line 548)
* AC_SYS_SIGLIST_DECLARED: Obsolete Macros. (line 563)
* AC_TEST_CPP: Obsolete Macros. (line 568)
* AC_TEST_PROGRAM: Obsolete Macros. (line 572)
* AC_TIMEZONE: Obsolete Macros. (line 576)
* AC_TIME_WITH_SYS_TIME: Obsolete Macros. (line 579)
* AC_TRY_ACT: AC_ACT_IFELSE vs AC_TRY_ACT.
(line 6)
* AC_TRY_COMPILE: Obsolete Macros. (line 583)
* AC_TRY_CPP: Obsolete Macros. (line 602)
* AC_TRY_LINK: Obsolete Macros. (line 615)
* AC_TRY_LINK_FUNC: Obsolete Macros. (line 644)
* AC_TRY_RUN: Obsolete Macros. (line 651)
* AC_TYPE_GETGROUPS: Particular Types. (line 14)
* AC_TYPE_INT16_T: Particular Types. (line 40)
* AC_TYPE_INT32_T: Particular Types. (line 43)
* AC_TYPE_INT64_T: Particular Types. (line 46)
* AC_TYPE_INT8_T: Particular Types. (line 21)
* AC_TYPE_INTMAX_T: Particular Types. (line 49)
* AC_TYPE_INTPTR_T: Particular Types. (line 54)
* AC_TYPE_LONG_DOUBLE: Particular Types. (line 59)
* AC_TYPE_LONG_DOUBLE_WIDER: Particular Types. (line 70)
* AC_TYPE_LONG_LONG_INT: Particular Types. (line 78)
* AC_TYPE_MBSTATE_T: Particular Types. (line 88)
* AC_TYPE_MODE_T: Particular Types. (line 96)
* AC_TYPE_OFF_T: Particular Types. (line 102)
* AC_TYPE_PID_T: Particular Types. (line 108)
* AC_TYPE_SIGNAL: Obsolete Macros. (line 662)
* AC_TYPE_SIZE_T: Particular Types. (line 114)
* AC_TYPE_SSIZE_T: Particular Types. (line 120)
* AC_TYPE_UID_T: Particular Types. (line 126)
* AC_TYPE_UINT16_T: Particular Types. (line 138)
* AC_TYPE_UINT32_T: Particular Types. (line 141)
* AC_TYPE_UINT64_T: Particular Types. (line 144)
* AC_TYPE_UINT8_T: Particular Types. (line 132)
* AC_TYPE_UINTMAX_T: Particular Types. (line 147)
* AC_TYPE_UINTPTR_T: Particular Types. (line 152)
* AC_TYPE_UNSIGNED_LONG_LONG_INT: Particular Types. (line 157)
* AC_UID_T: Obsolete Macros. (line 679)
* AC_UNISTD_H: Obsolete Macros. (line 682)
* AC_USE_SYSTEM_EXTENSIONS: Posix Variants. (line 10)
* AC_USG: Obsolete Macros. (line 685)
* AC_UTIME_NULL: Obsolete Macros. (line 690)
* AC_VALIDATE_CACHED_SYSTEM_TUPLE: Obsolete Macros. (line 693)
* AC_VERBOSE: Obsolete Macros. (line 698)
* AC_VFORK: Obsolete Macros. (line 701)
* AC_VPRINTF: Obsolete Macros. (line 704)
* AC_WAIT3: Obsolete Macros. (line 707)
* AC_WARN: Obsolete Macros. (line 712)
* AC_WARNING: Reporting Messages. (line 26)
* AC_WITH: Obsolete Macros. (line 715)
* AC_WORDS_BIGENDIAN: Obsolete Macros. (line 719)
* AC_XENIX_DIR: Obsolete Macros. (line 722)
* AC_YYTEXT_POINTER: Obsolete Macros. (line 739)
* AH_BOTTOM: Autoheader Macros. (line 50)
* AH_HEADER: Configuration Headers.
(line 53)
* AH_TEMPLATE: Autoheader Macros. (line 19)
* AH_TOP: Autoheader Macros. (line 47)
* AH_VERBATIM: Autoheader Macros. (line 40)
* AU_ALIAS: Obsoleting Macros. (line 34)
* AU_DEFUN: Obsoleting Macros. (line 18)
File: autoconf.info, Node: M4 Macro Index, Next: Autotest Macro Index, Prev: Autoconf Macro Index, Up: Indices
B.6 M4 Macro Index
==================
This is an alphabetical list of the M4, M4sugar, and M4sh macros.
[index ]
* Menu:
* __file__: Redefined M4 Macros. (line 41)
* __line__: Redefined M4 Macros. (line 41)
* __oline__: Redefined M4 Macros. (line 45)
* AS_BOURNE_COMPATIBLE: Initialization Macros.
(line 7)
* AS_BOX: Common Shell Constructs.
(line 10)
* AS_CASE: Common Shell Constructs.
(line 19)
* AS_DIRNAME: Common Shell Constructs.
(line 25)
* AS_ECHO: Common Shell Constructs.
(line 33)
* AS_ECHO_N: Common Shell Constructs.
(line 41)
* AS_ESCAPE: Common Shell Constructs.
(line 49)
* AS_EXECUTABLE_P: Common Shell Constructs.
(line 89)
* AS_EXIT: Common Shell Constructs.
(line 94)
* AS_HELP_STRING: Pretty Help Strings. (line 15)
* AS_IF: Common Shell Constructs.
(line 100)
* AS_INIT: Initialization Macros.
(line 14)
* AS_INIT_GENERATED: Initialization Macros.
(line 26)
* AS_LINENO_PREPARE: Initialization Macros.
(line 67)
* AS_LITERAL_IF: Polymorphic Variables.
(line 21)
* AS_LITERAL_WORD_IF: Polymorphic Variables.
(line 21)
* AS_MESSAGE_FD: File Descriptor Macros.
(line 17)
* AS_MESSAGE_LOG_FD: File Descriptor Macros.
(line 29)
* AS_ME_PREPARE: Initialization Macros.
(line 72)
* AS_MKDIR_P: Common Shell Constructs.
(line 114)
* AS_ORIGINAL_STDIN_FD: File Descriptor Macros.
(line 39)
* AS_SET_CATFILE: Common Shell Constructs.
(line 154)
* AS_SET_STATUS: Common Shell Constructs.
(line 126)
* AS_SHELL_SANITIZE: Initialization Macros.
(line 101)
* AS_TMPDIR: Initialization Macros.
(line 77)
* AS_TR_CPP: Common Shell Constructs.
(line 134)
* AS_TR_SH: Common Shell Constructs.
(line 143)
* AS_UNSET: Common Shell Constructs.
(line 158)
* AS_VAR_APPEND: Polymorphic Variables.
(line 62)
* AS_VAR_ARITH: Polymorphic Variables.
(line 83)
* AS_VAR_COPY: Polymorphic Variables.
(line 100)
* AS_VAR_IF: Polymorphic Variables.
(line 119)
* AS_VAR_POPDEF: Polymorphic Variables.
(line 128)
* AS_VAR_PUSHDEF: Polymorphic Variables.
(line 128)
* AS_VAR_SET: Polymorphic Variables.
(line 170)
* AS_VAR_SET_IF: Polymorphic Variables.
(line 180)
* AS_VAR_TEST_SET: Polymorphic Variables.
(line 185)
* AS_VERSION_COMPARE: Common Shell Constructs.
(line 164)
* dnl: Redefined M4 Macros. (line 52)
* m4_append: Text processing Macros.
(line 16)
* m4_append_uniq: Text processing Macros.
(line 16)
* m4_append_uniq_w: Text processing Macros.
(line 69)
* m4_apply: Evaluation Macros. (line 10)
* m4_argn: Looping constructs. (line 29)
* m4_assert: Diagnostic Macros. (line 11)
* m4_bmatch: Conditional constructs.
(line 11)
* m4_bpatsubst: Redefined M4 Macros. (line 55)
* m4_bpatsubsts: Conditional constructs.
(line 18)
* m4_bregexp: Redefined M4 Macros. (line 60)
* m4_builtin: Redefined M4 Macros. (line 6)
* m4_car: Looping constructs. (line 35)
* m4_case: Conditional constructs.
(line 33)
* m4_cdr: Looping constructs. (line 41)
* m4_changecom: Redefined M4 Macros. (line 6)
* m4_changequote: Redefined M4 Macros. (line 6)
* m4_chomp: Text processing Macros.
(line 80)
* m4_chomp_all: Text processing Macros.
(line 80)
* m4_cleardivert: Diversion support. (line 116)
* m4_cmp: Number processing Macros.
(line 11)
* m4_combine: Text processing Macros.
(line 88)
* m4_cond: Conditional constructs.
(line 42)
* m4_copy: Redefined M4 Macros. (line 68)
* m4_copy_force: Redefined M4 Macros. (line 68)
* m4_count: Evaluation Macros. (line 26)
* m4_curry: Evaluation Macros. (line 30)
* m4_debugfile: Redefined M4 Macros. (line 6)
* m4_debugmode: Redefined M4 Macros. (line 6)
* m4_decr: Redefined M4 Macros. (line 6)
* m4_default: Conditional constructs.
(line 73)
* m4_default_nblank: Conditional constructs.
(line 73)
* m4_default_nblank_quoted: Conditional constructs.
(line 73)
* m4_default_quoted: Conditional constructs.
(line 73)
* m4_define: Redefined M4 Macros. (line 6)
* m4_define_default: Conditional constructs.
(line 122)
* m4_defn: Redefined M4 Macros. (line 87)
* m4_divert: Redefined M4 Macros. (line 95)
* m4_divert_once: Diversion support. (line 119)
* m4_divert_pop: Diversion support. (line 124)
* m4_divert_push: Diversion support. (line 130)
* m4_divert_text: Diversion support. (line 136)
* m4_divnum: Redefined M4 Macros. (line 6)
* m4_do: Evaluation Macros. (line 45)
* m4_dquote: Evaluation Macros. (line 65)
* m4_dquote_elt: Evaluation Macros. (line 70)
* m4_dumpdef: Redefined M4 Macros. (line 107)
* m4_dumpdefs: Redefined M4 Macros. (line 107)
* m4_echo: Evaluation Macros. (line 75)
* m4_errprint: Redefined M4 Macros. (line 6)
* m4_errprintn: Diagnostic Macros. (line 16)
* m4_escape: Text processing Macros.
(line 108)
* m4_esyscmd: Redefined M4 Macros. (line 6)
* m4_esyscmd_s: Redefined M4 Macros. (line 124)
* m4_eval: Redefined M4 Macros. (line 6)
* m4_exit: Redefined M4 Macros. (line 130)
* m4_expand: Evaluation Macros. (line 79)
* m4_fatal: Diagnostic Macros. (line 20)
* m4_flatten: Text processing Macros.
(line 113)
* m4_for: Looping constructs. (line 59)
* m4_foreach: Looping constructs. (line 69)
* m4_foreach_w: Looping constructs. (line 83)
* m4_format: Redefined M4 Macros. (line 6)
* m4_if: Redefined M4 Macros. (line 136)
* m4_ifblank: Conditional constructs.
(line 127)
* m4_ifdef: Redefined M4 Macros. (line 6)
* m4_ifnblank: Conditional constructs.
(line 127)
* m4_ifndef: Conditional constructs.
(line 135)
* m4_ifset: Conditional constructs.
(line 139)
* m4_ifval: Conditional constructs.
(line 145)
* m4_ifvaln: Conditional constructs.
(line 150)
* m4_ignore: Evaluation Macros. (line 129)
* m4_include: Redefined M4 Macros. (line 143)
* m4_incr: Redefined M4 Macros. (line 6)
* m4_index: Redefined M4 Macros. (line 6)
* m4_indir: Redefined M4 Macros. (line 6)
* m4_init: Diversion support. (line 161)
* m4_join: Text processing Macros.
(line 119)
* m4_joinall: Text processing Macros.
(line 119)
* m4_len: Redefined M4 Macros. (line 6)
* m4_list_cmp: Number processing Macros.
(line 16)
* m4_location: Diagnostic Macros. (line 24)
* m4_maketemp: Redefined M4 Macros. (line 147)
* m4_make_list: Evaluation Macros. (line 142)
* m4_map: Looping constructs. (line 93)
* m4_mapall: Looping constructs. (line 93)
* m4_mapall_sep: Looping constructs. (line 93)
* m4_map_args: Looping constructs. (line 130)
* m4_map_args_pair: Looping constructs. (line 166)
* m4_map_args_sep: Looping constructs. (line 178)
* m4_map_args_w: Looping constructs. (line 189)
* m4_map_sep: Looping constructs. (line 93)
* m4_max: Number processing Macros.
(line 38)
* m4_min: Number processing Macros.
(line 42)
* m4_mkstemp: Redefined M4 Macros. (line 147)
* m4_n: Conditional constructs.
(line 154)
* m4_newline: Text processing Macros.
(line 134)
* m4_normalize: Text processing Macros.
(line 140)
* m4_pattern_allow: Forbidden Patterns. (line 30)
* m4_pattern_forbid: Forbidden Patterns. (line 17)
* m4_popdef: Redefined M4 Macros. (line 157)
* m4_pushdef: Redefined M4 Macros. (line 6)
* m4_quote: Evaluation Macros. (line 161)
* m4_rename: Redefined M4 Macros. (line 68)
* m4_rename_force: Redefined M4 Macros. (line 68)
* m4_reverse: Evaluation Macros. (line 167)
* m4_re_escape: Text processing Macros.
(line 148)
* m4_set_add: Set manipulation Macros.
(line 19)
* m4_set_add_all: Set manipulation Macros.
(line 25)
* m4_set_contains: Set manipulation Macros.
(line 29)
* m4_set_contents: Set manipulation Macros.
(line 49)
* m4_set_delete: Set manipulation Macros.
(line 79)
* m4_set_difference: Set manipulation Macros.
(line 85)
* m4_set_dump: Set manipulation Macros.
(line 49)
* m4_set_empty: Set manipulation Macros.
(line 107)
* m4_set_foreach: Set manipulation Macros.
(line 113)
* m4_set_intersection: Set manipulation Macros.
(line 85)
* m4_set_list: Set manipulation Macros.
(line 134)
* m4_set_listc: Set manipulation Macros.
(line 134)
* m4_set_map: Set manipulation Macros.
(line 169)
* m4_set_map_sep: Set manipulation Macros.
(line 182)
* m4_set_remove: Set manipulation Macros.
(line 193)
* m4_set_size: Set manipulation Macros.
(line 204)
* m4_set_union: Set manipulation Macros.
(line 85)
* m4_shift: Redefined M4 Macros. (line 6)
* m4_shift2: Looping constructs. (line 199)
* m4_shift3: Looping constructs. (line 199)
* m4_shiftn: Looping constructs. (line 199)
* m4_sign: Number processing Macros.
(line 46)
* m4_sinclude: Redefined M4 Macros. (line 143)
* m4_split: Text processing Macros.
(line 152)
* m4_stack_foreach: Looping constructs. (line 207)
* m4_stack_foreach_lifo: Looping constructs. (line 207)
* m4_stack_foreach_sep: Looping constructs. (line 229)
* m4_stack_foreach_sep_lifo: Looping constructs. (line 229)
* m4_strip: Text processing Macros.
(line 158)
* m4_substr: Redefined M4 Macros. (line 6)
* m4_syscmd: Redefined M4 Macros. (line 6)
* m4_sysval: Redefined M4 Macros. (line 6)
* m4_text_box: Text processing Macros.
(line 166)
* m4_text_wrap: Text processing Macros.
(line 181)
* m4_tolower: Text processing Macros.
(line 212)
* m4_toupper: Text processing Macros.
(line 212)
* m4_traceoff: Redefined M4 Macros. (line 6)
* m4_traceon: Redefined M4 Macros. (line 6)
* m4_translit: Redefined M4 Macros. (line 6)
* m4_undefine: Redefined M4 Macros. (line 161)
* m4_undivert: Redefined M4 Macros. (line 169)
* m4_unquote: Evaluation Macros. (line 176)
* m4_version_compare: Number processing Macros.
(line 50)
* m4_version_prereq: Number processing Macros.
(line 90)
* m4_warn: Diagnostic Macros. (line 28)
* m4_wrap: Redefined M4 Macros. (line 179)
* m4_wrap_lifo: Redefined M4 Macros. (line 179)
File: autoconf.info, Node: Autotest Macro Index, Next: Program & Function Index, Prev: M4 Macro Index, Up: Indices
B.7 Autotest Macro Index
========================
This is an alphabetical list of the Autotest macros.
[index ]
* Menu:
* AT_ARG_OPTION: Writing Testsuites. (line 50)
* AT_ARG_OPTION_ARG: Writing Testsuites. (line 79)
* AT_BANNER: Writing Testsuites. (line 124)
* AT_CAPTURE_FILE: Writing Testsuites. (line 154)
* AT_CHECK: Writing Testsuites. (line 209)
* AT_CHECK_EUNIT: Writing Testsuites. (line 299)
* AT_CHECK_UNQUOTED: Writing Testsuites. (line 209)
* AT_CLEANUP: Writing Testsuites. (line 195)
* AT_COLOR_TESTS: Writing Testsuites. (line 105)
* AT_COPYRIGHT: Writing Testsuites. (line 41)
* AT_DATA: Writing Testsuites. (line 199)
* AT_FAIL_IF: Writing Testsuites. (line 158)
* AT_INIT: Writing Testsuites. (line 31)
* AT_KEYWORDS: Writing Testsuites. (line 141)
* AT_PACKAGE_BUGREPORT: Making testsuite Scripts.
(line 12)
* AT_PACKAGE_NAME: Making testsuite Scripts.
(line 12)
* AT_PACKAGE_STRING: Making testsuite Scripts.
(line 12)
* AT_PACKAGE_TARNAME: Making testsuite Scripts.
(line 12)
* AT_PACKAGE_URL: Making testsuite Scripts.
(line 12)
* AT_PACKAGE_VERSION: Making testsuite Scripts.
(line 12)
* AT_SETUP: Writing Testsuites. (line 134)
* AT_SKIP_IF: Writing Testsuites. (line 172)
* AT_TESTED: Writing Testsuites. (line 109)
* AT_XFAIL_IF: Writing Testsuites. (line 187)
File: autoconf.info, Node: Program & Function Index, Next: Concept Index, Prev: Autotest Macro Index, Up: Indices
B.8 Program and Function Index
==============================
This is an alphabetical list of the programs and functions whose
portability is discussed in this document.
[index ]
* Menu:
* !: Limitations of Builtins.
(line 41)
* .: Limitations of Builtins.
(line 17)
* /usr/bin/ksh on Solaris: Shellology. (line 62)
* /usr/dt/bin/dtksh on Solaris: Shellology. (line 65)
* /usr/xpg4/bin/sh on Solaris: Shellology. (line 63)
* {...}: Limitations of Builtins.
(line 74)
* alloca: Particular Functions.
(line 10)
* alloca.h: Particular Functions.
(line 10)
* assert.h: Particular Headers. (line 20)
* awk: Limitations of Usual Tools.
(line 10)
* basename: Limitations of Usual Tools.
(line 141)
* break: Limitations of Builtins.
(line 107)
* case: Limitations of Builtins.
(line 110)
* cat: Limitations of Usual Tools.
(line 145)
* cc: Limitations of Usual Tools.
(line 148)
* cd: Limitations of Builtins.
(line 203)
* chgrp: Limitations of Usual Tools.
(line 178)
* chmod: Limitations of Usual Tools.
(line 182)
* chown: Particular Functions.
(line 63)
* chown <1>: Limitations of Usual Tools.
(line 178)
* closedir: Particular Functions.
(line 69)
* cmp: Limitations of Usual Tools.
(line 192)
* cp: Limitations of Usual Tools.
(line 199)
* ctype.h: Particular Headers. (line 135)
* date: Limitations of Usual Tools.
(line 258)
* diff: Limitations of Usual Tools.
(line 268)
* dirent.h: Particular Headers. (line 25)
* dirname: Limitations of Usual Tools.
(line 274)
* echo: Limitations of Builtins.
(line 233)
* egrep: Limitations of Usual Tools.
(line 281)
* error_at_line: Particular Functions.
(line 84)
* eval: Limitations of Builtins.
(line 270)
* exec: Limitations of Builtins.
(line 313)
* exit: Function Portability.
(line 17)
* exit <1>: Limitations of Builtins.
(line 353)
* export: Limitations of Builtins.
(line 378)
* expr: Limitations of Usual Tools.
(line 306)
* expr <1>: Limitations of Usual Tools.
(line 339)
* expr (|): Limitations of Usual Tools.
(line 320)
* false: Limitations of Builtins.
(line 425)
* fgrep: Limitations of Usual Tools.
(line 429)
* find: Limitations of Usual Tools.
(line 438)
* float.h: Particular Headers. (line 135)
* fnmatch: Particular Functions.
(line 94)
* fnmatch <1>: Particular Functions.
(line 109)
* fnmatch <2>: Particular Functions.
(line 451)
* fnmatch.h: Particular Functions.
(line 451)
* for: Limitations of Builtins.
(line 429)
* fork: Particular Functions.
(line 120)
* free: Function Portability.
(line 27)
* fseeko: Particular Functions.
(line 147)
* ftello: Particular Functions.
(line 147)
* getgroups: Particular Functions.
(line 155)
* getloadavg: Particular Functions.
(line 161)
* getmntent: Particular Functions.
(line 195)
* getpgid: Particular Functions.
(line 205)
* getpgrp: Particular Functions.
(line 205)
* grep: Limitations of Usual Tools.
(line 452)
* if: Limitations of Builtins.
(line 474)
* inttypes.h: Header Portability. (line 20)
* inttypes.h <1>: Particular Types. (line 6)
* isinf: Function Portability.
(line 32)
* isnan: Function Portability.
(line 32)
* join: Limitations of Usual Tools.
(line 519)
* ksh: Shellology. (line 56)
* ksh88: Shellology. (line 56)
* ksh93: Shellology. (line 56)
* linux/irda.h: Header Portability. (line 27)
* linux/random.h: Header Portability. (line 30)
* ln: Limitations of Usual Tools.
(line 536)
* ls: Limitations of Usual Tools.
(line 548)
* lstat: Particular Functions.
(line 228)
* lstat <1>: Particular Functions.
(line 363)
* make: Portable Make. (line 6)
* malloc: Function Portability.
(line 82)
* malloc <1>: Particular Functions.
(line 247)
* mbrtowc: Particular Functions.
(line 279)
* memcmp: Particular Functions.
(line 286)
* mkdir: Limitations of Usual Tools.
(line 570)
* mkfifo: Limitations of Usual Tools.
(line 604)
* mknod: Limitations of Usual Tools.
(line 604)
* mktemp: Limitations of Usual Tools.
(line 614)
* mktime: Particular Functions.
(line 299)
* mmap: Particular Functions.
(line 311)
* mv: Limitations of Usual Tools.
(line 639)
* ndir.h: Particular Headers. (line 25)
* net/if.h: Header Portability. (line 33)
* netinet/if_ether.h: Header Portability. (line 53)
* nlist.h: Particular Functions.
(line 178)
* od: Limitations of Usual Tools.
(line 671)
* pdksh: Shellology. (line 76)
* printf: Limitations of Builtins.
(line 513)
* putenv: Function Portability.
(line 89)
* pwd: Limitations of Builtins.
(line 540)
* read: Limitations of Builtins.
(line 569)
* realloc: Function Portability.
(line 105)
* realloc <1>: Particular Functions.
(line 326)
* resolv.h: Particular Headers. (line 73)
* rm: Limitations of Usual Tools.
(line 681)
* rmdir: Limitations of Usual Tools.
(line 700)
* sed: Limitations of Usual Tools.
(line 704)
* sed (t): Limitations of Usual Tools.
(line 899)
* select: Particular Functions.
(line 337)
* set: Limitations of Builtins.
(line 575)
* setpgrp: Particular Functions.
(line 348)
* setvbuf: Obsolete Macros. (line 208)
* shift: Limitations of Builtins.
(line 726)
* sigaction: Function Portability.
(line 110)
* signal: Function Portability.
(line 110)
* signal.h: Obsolete Macros. (line 662)
* sleep: Limitations of Usual Tools.
(line 959)
* snprintf: Function Portability.
(line 124)
* sort: Limitations of Usual Tools.
(line 965)
* source: Limitations of Builtins.
(line 734)
* sprintf: Function Portability.
(line 135)
* sscanf: Function Portability.
(line 141)
* stat: Particular Functions.
(line 363)
* stdarg.h: Particular Headers. (line 135)
* stdbool.h: Particular Headers. (line 10)
* stdbool.h <1>: Particular Headers. (line 101)
* stdint.h: Header Portability. (line 20)
* stdint.h <1>: Particular Types. (line 6)
* stdlib.h: Header Portability. (line 76)
* stdlib.h <1>: Particular Headers. (line 135)
* stdlib.h <2>: Particular Types. (line 6)
* strcoll: Particular Functions.
(line 379)
* strerror_r: Function Portability.
(line 149)
* strerror_r <1>: Particular Functions.
(line 388)
* strftime: Particular Functions.
(line 400)
* string.h: Particular Headers. (line 135)
* string.h <1>: Particular Headers. (line 154)
* strings.h: Particular Headers. (line 154)
* strnlen: Function Portability.
(line 155)
* strnlen <1>: Particular Functions.
(line 425)
* strtod: Particular Functions.
(line 407)
* strtold: Particular Functions.
(line 419)
* sys/dir.h: Particular Headers. (line 25)
* sys/ioctl.h: Particular Headers. (line 269)
* sys/mkdev.h: Particular Headers. (line 68)
* sys/mount.h: Header Portability. (line 79)
* sys/ndir.h: Particular Headers. (line 25)
* sys/ptem.h: Header Portability. (line 83)
* sys/socket.h: Header Portability. (line 86)
* sys/stat.h: Particular Headers. (line 92)
* sys/sysmacros.h: Particular Headers. (line 68)
* sys/time.h: Particular Headers. (line 243)
* sys/time.h <1>: Particular Structures.
(line 35)
* sys/types.h: Particular Types. (line 6)
* sys/ucred.h: Header Portability. (line 89)
* sys/wait.h: Particular Headers. (line 203)
* sysconf: Function Portability.
(line 170)
* tar: Limitations of Usual Tools.
(line 970)
* termios.h: Particular Headers. (line 269)
* test: Limitations of Builtins.
(line 738)
* time.h: Particular Headers. (line 243)
* time.h <1>: Particular Structures.
(line 35)
* touch: Limitations of Usual Tools.
(line 975)
* tr: Limitations of Usual Tools.
(line 988)
* trap: Limitations of Builtins.
(line 849)
* true: Limitations of Builtins.
(line 923)
* unistd.h: Particular Headers. (line 227)
* unlink: Function Portability.
(line 174)
* unset: Limitations of Builtins.
(line 939)
* unsetenv: Function Portability.
(line 180)
* utime: Particular Functions.
(line 432)
* va_copy: Function Portability.
(line 185)
* va_list: Function Portability.
(line 192)
* vfork: Particular Functions.
(line 120)
* vfork.h: Particular Functions.
(line 120)
* vprintf: Particular Functions.
(line 442)
* vsnprintf: Function Portability.
(line 124)
* vsprintf: Function Portability.
(line 135)
* vsprintf <1>: Particular Functions.
(line 442)
* wait: Limitations of Builtins.
(line 966)
* wait3: Obsolete Macros. (line 216)
* wchar.h: Particular Types. (line 88)
* X11/extensions/scrnsaver.h: Header Portability. (line 92)
File: autoconf.info, Node: Concept Index, Prev: Program & Function Index, Up: Indices
B.9 Concept Index
=================
This is an alphabetical list of the files, tools, and concepts
introduced in this document.
[index ]
* Menu:
* "$@": Shell Substitutions. (line 70)
* $((EXPRESSION)): Shell Substitutions. (line 454)
* $(COMMANDS): Shell Substitutions. (line 421)
* $<, explicit rules, and VPATH: $< in Explicit Rules.
(line 6)
* ${#VAR}: Shell Substitutions. (line 367)
* ${VAR##WORD}: Shell Substitutions. (line 367)
* ${VAR#WORD}: Shell Substitutions. (line 367)
* ${VAR%%WORD}: Shell Substitutions. (line 367)
* ${VAR%WORD}: Shell Substitutions. (line 367)
* ${VAR+VALUE}: Shell Substitutions. (line 147)
* ${VAR-VALUE}: Shell Substitutions. (line 139)
* ${VAR=EXPANDED-VALUE}: Shell Substitutions. (line 318)
* ${VAR=LITERAL}: Shell Substitutions. (line 294)
* ${VAR=VALUE}: Shell Substitutions. (line 214)
* 64-bit libraries: Site Defaults. (line 96)
* @&t@: Quadrigraphs. (line 6)
* @S|@: Quadrigraphs. (line 6)
* ^ quoting: Shell Substitutions. (line 493)
* _m4_divert_diversion: New Macros. (line 6)
* `COMMANDS`: Shell Substitutions. (line 375)
* absolute file names, detect: File System Conventions.
(line 51)
* abs_builddir: Preset Output Variables.
(line 175)
* abs_srcdir: Preset Output Variables.
(line 197)
* abs_top_builddir: Preset Output Variables.
(line 190)
* abs_top_srcdir: Preset Output Variables.
(line 204)
* acconfig.h: acconfig Header. (line 6)
* aclocal.m4: Making configure Scripts.
(line 6)
* ac_objext: Generic Functions. (line 59)
* ac_path_VARIABLE: Generic Programs. (line 123)
* ac_path_VARIABLE_found: Generic Programs. (line 123)
* ac_srcdir: Configuration Actions.
(line 85)
* ac_top_build_prefix: Configuration Actions.
(line 80)
* ac_top_srcdir: Configuration Actions.
(line 76)
* Ash: Shellology. (line 16)
* at_arg_OPTION: Writing Testsuites. (line 50)
* at_arg_OPTION <1>: Writing Testsuites. (line 79)
* at_optarg: Writing Testsuites. (line 62)
* at_optarg <1>: Writing Testsuites. (line 90)
* at_optarg_OPTION: Writing Testsuites. (line 62)
* at_status: Writing Testsuites. (line 209)
* autoconf: autoconf Invocation. (line 6)
* Autoconf upgrading: Autoconf 1. (line 6)
* Autoconf upgrading <1>: Autoconf 2.13. (line 6)
* Autoconf version: Versioning. (line 6)
* autoheader: autoheader Invocation.
(line 6)
* Autoheader macros: Autoheader Macros. (line 6)
* autom4te debugging tips: Debugging via autom4te.
(line 6)
* Autom4te Library: autom4te Invocation. (line 224)
* autom4te.cache: autom4te Invocation. (line 130)
* autom4te.cfg: autom4te Invocation. (line 256)
* Automake: Automake. (line 19)
* Automatic remaking: Automatic Remaking. (line 6)
* automatic rule rewriting and VPATH: Automatic Rule Rewriting.
(line 6)
* autopoint: autoreconf Invocation.
(line 30)
* autoreconf: autoreconf Invocation.
(line 6)
* autoscan: autoscan Invocation. (line 6)
* Autotest: Using Autotest. (line 6)
* AUTOTEST_PATH: testsuite Invocation.
(line 59)
* autoupdate: autoupdate Invocation.
(line 6)
* Back trace: autoconf Invocation. (line 86)
* Back trace <1>: autom4te Invocation. (line 86)
* balancing parentheses: Balancing Parentheses.
(line 6)
* Bash: Shellology. (line 43)
* Bash 2.05 and later: Shellology. (line 48)
* bindir: Installation Directory Variables.
(line 14)
* Bootstrap: Bootstrapping. (line 6)
* BSD make and obj/: obj/ and Make. (line 6)
* buffer overruns: Buffer Overruns. (line 6)
* Build directories: Build Directories. (line 6)
* builddir: Preset Output Variables.
(line 172)
* C function portability: Function Portability.
(line 6)
* C types: Types. (line 6)
* Cache: Caching Results. (line 6)
* Cache variable: Cache Variable Names.
(line 6)
* Cache, enabling: configure Invocation.
(line 25)
* Canonical system type: Canonicalizing. (line 6)
* carriage return, deleting: Limitations of Usual Tools.
(line 988)
* CFLAGS: Preset Output Variables.
(line 22)
* changequote: Changequote is Evil. (line 6)
* Coding style: Coding Style. (line 6)
* Command Substitution: Shell Substitutions. (line 375)
* command-line, macros set on: Command-line Macros and whitespace.
(line 6)
* Commands for configuration: Configuration Commands.
(line 6)
* Comments in Makefile macros: Comments in Make Macros.
(line 6)
* Comments in Makefile rules: Comments in Make Rules.
(line 6)
* Common autoconf behavior: Common Behavior. (line 6)
* Compilers: Compilers and Preprocessors.
(line 6)
* composing variable names: Polymorphic Variables.
(line 128)
* config.h: Configuration Headers.
(line 6)
* config.h.bot: acconfig Header. (line 6)
* config.h.in: Header Templates. (line 6)
* config.h.top: acconfig Header. (line 6)
* config.site: Site Defaults. (line 6)
* config.status: config.status Invocation.
(line 6)
* config.sub: Specifying Target Triplets.
(line 59)
* Configuration actions: Configuration Actions.
(line 6)
* Configuration commands: Configuration Commands.
(line 6)
* Configuration file creation: Configuration Files. (line 6)
* Configuration Header: Configuration Headers.
(line 6)
* Configuration Header Template: Header Templates. (line 6)
* Configuration links: Configuration Links. (line 6)
* configure: Making configure Scripts.
(line 6)
* configure <1>: Running configure Scripts.
(line 6)
* Configure subdirectories: Subdirectories. (line 6)
* configure.ac: Making configure Scripts.
(line 27)
* configure.in: Making configure Scripts.
(line 27)
* configure_input: Preset Output Variables.
(line 56)
* CONFIG_COMMANDS: Obsolete config.status Use.
(line 10)
* CONFIG_FILES: Obsolete config.status Use.
(line 14)
* CONFIG_HEADERS: Obsolete config.status Use.
(line 19)
* CONFIG_LINKS: Obsolete config.status Use.
(line 24)
* CONFIG_SHELL: config.status Invocation.
(line 100)
* CONFIG_STATUS: config.status Invocation.
(line 106)
* Copyright Notice: Notices. (line 10)
* Copyright Notice <1>: Writing Testsuites. (line 41)
* CPPFLAGS: Preset Output Variables.
(line 70)
* Creating configuration files: Configuration Files. (line 6)
* Creating temporary files: Limitations of Usual Tools.
(line 614)
* Cross compilation: Hosts and Cross-Compilation.
(line 6)
* CXXFLAGS: Preset Output Variables.
(line 92)
* Darwin: Systemology. (line 22)
* Data structure, set: Set manipulation Macros.
(line 6)
* datadir: Installation Directory Variables.
(line 17)
* datarootdir: Installation Directory Variables.
(line 21)
* datarootdir <1>: Changed Directory Variables.
(line 6)
* debugging tips: Debugging via autom4te.
(line 6)
* Declaration, checking: Declarations. (line 6)
* Default includes: Default Includes. (line 6)
* DEFS: Preset Output Variables.
(line 96)
* deleting carriage return: Limitations of Usual Tools.
(line 988)
* Dependencies between macros: Dependencies Between Macros.
(line 6)
* descriptors: File Descriptor Macros.
(line 6)
* Descriptors: File Descriptors. (line 6)
* Directories, build: Build Directories. (line 6)
* Directories, installation: Installation Directory Variables.
(line 6)
* division, integer: Signed Integer Division.
(line 6)
* dnl: Macro Definitions. (line 50)
* dnl <1>: Coding Style. (line 42)
* docdir: Installation Directory Variables.
(line 25)
* double-colon rules and VPATH: VPATH and Double-colon.
(line 6)
* dvidir: Installation Directory Variables.
(line 29)
* ECHO_C: Preset Output Variables.
(line 104)
* ECHO_N: Preset Output Variables.
(line 105)
* ECHO_T: Preset Output Variables.
(line 106)
* Endianness: C Compiler. (line 184)
* environment, macros set from: Command-line Macros and whitespace.
(line 6)
* Erlang: Erlang Compiler and Interpreter.
(line 6)
* Erlang, Library, checking: Erlang Libraries. (line 6)
* ERLANG_INSTALL_LIB_DIR: Installation Directory Variables.
(line 200)
* ERLANG_INSTALL_LIB_DIR_LIBRARY: Installation Directory Variables.
(line 205)
* ERLCFLAGS: Preset Output Variables.
(line 118)
* exec_prefix: Installation Directory Variables.
(line 32)
* exiting portably: Exiting Portably. (line 6)
* expanded before required: Expanded Before Required.
(line 6)
* explicit rules, $<, and VPATH: $< in Explicit Rules.
(line 6)
* External software: External Software. (line 6)
* F77: Fortran Compiler. (line 6)
* FCFLAGS: Preset Output Variables.
(line 124)
* FFLAGS: Preset Output Variables.
(line 131)
* FHS: Site Defaults. (line 82)
* file descriptors: File Descriptor Macros.
(line 6)
* File descriptors: File Descriptors. (line 6)
* File system conventions: File System Conventions.
(line 6)
* File, checking: Files. (line 6)
* Filesystem Hierarchy Standard: Site Defaults. (line 82)
* floating point: Floating Point Portability.
(line 6)
* Forbidden patterns: Forbidden Patterns. (line 6)
* Fortran: Fortran Compiler. (line 6)
* Function, checking: Particular Functions.
(line 6)
* Gettext: autoreconf Invocation.
(line 30)
* GNU build system: The GNU Build System.
(line 6)
* Gnulib: Gnulib. (line 11)
* Go: Go Compiler. (line 6)
* GOFLAGS: Preset Output Variables.
(line 168)
* Header portability: Header Portability. (line 6)
* Header templates: Header Templates. (line 6)
* Header, checking: Header Files. (line 6)
* Help strings: Pretty Help Strings. (line 6)
* Here-documents: Here-Documents. (line 6)
* History of autoconf: History. (line 6)
* htmldir: Installation Directory Variables.
(line 39)
* ifnames: ifnames Invocation. (line 6)
* Imake: Why Not Imake. (line 6)
* includedir: Installation Directory Variables.
(line 42)
* Includes, default: Default Includes. (line 6)
* indirection, variable name: Polymorphic Variables.
(line 6)
* infodir: Installation Directory Variables.
(line 45)
* input: File Descriptor Macros.
(line 6)
* Install prefix: Default Prefix. (line 6)
* Installation directories: Installation Directory Variables.
(line 6)
* Instantiation: Output. (line 13)
* integer overflow: Integer Overflow. (line 6)
* integer overflow <1>: Integer Overflow Basics.
(line 6)
* integer overflow <2>: Signed Overflow Examples.
(line 6)
* integer overflow <3>: Signed Overflow Advice.
(line 6)
* Introduction: Introduction. (line 6)
* invoking the shell: Invoking the Shell. (line 6)
* Korn shell: Shellology. (line 56)
* Ksh: Shellology. (line 56)
* Language: Language Choice. (line 6)
* Large file support: System Services. (line 48)
* LDFLAGS: Preset Output Variables.
(line 138)
* LFS: System Services. (line 48)
* lib64: Site Defaults. (line 96)
* libdir: Installation Directory Variables.
(line 48)
* libexecdir: Installation Directory Variables.
(line 51)
* Library, checking: Libraries. (line 6)
* LIBS: Preset Output Variables.
(line 152)
* Libtool: Libtool. (line 13)
* License: Distributing. (line 6)
* Limitations of make: Portable Make. (line 6)
* Limitations of shell builtins: Limitations of Builtins.
(line 6)
* Limitations of usual tools: Limitations of Usual Tools.
(line 6)
* Links: Configuration Links. (line 12)
* Links for configuration: Configuration Links. (line 6)
* Listing directories: Limitations of Usual Tools.
(line 548)
* localedir: Installation Directory Variables.
(line 54)
* localstatedir: Installation Directory Variables.
(line 59)
* loop induction: Optimization and Wraparound.
(line 6)
* low-level output: File Descriptor Macros.
(line 6)
* M4: Programming in M4. (line 6)
* M4 quotation: M4 Quotation. (line 6)
* M4sugar: Programming in M4sugar.
(line 6)
* m4sugar debugging tips: Debugging via autom4te.
(line 6)
* Macro invocation stack: autoconf Invocation. (line 86)
* Macro invocation stack <1>: autom4te Invocation. (line 86)
* Macros, called once: One-Shot Macros. (line 6)
* Macros, obsoleting: Obsoleting Macros. (line 6)
* Macros, ordering: Suggested Ordering. (line 6)
* Macros, prerequisites: Prerequisite Macros. (line 6)
* make -k: make -k Status. (line 6)
* make and MAKEFLAGS: The Make Macro MAKEFLAGS.
(line 6)
* make and SHELL: The Make Macro SHELL.
(line 6)
* Makefile macros and comments: Comments in Make Macros.
(line 6)
* Makefile macros and whitespace: Trailing whitespace in Make Macros.
(line 6)
* Makefile rules and comments: Comments in Make Rules.
(line 6)
* Makefile rules and newlines: Newlines in Make Rules.
(line 6)
* Makefile substitutions: Makefile Substitutions.
(line 6)
* MAKEFLAGS and make: The Make Macro MAKEFLAGS.
(line 6)
* Making directories: Limitations of Usual Tools.
(line 570)
* mandir: Installation Directory Variables.
(line 62)
* Messages, from autoconf: Reporting Messages. (line 6)
* Messages, from configure: Printing Messages. (line 6)
* Messages, from M4sugar: Diagnostic Macros. (line 6)
* Moving open files: Limitations of Usual Tools.
(line 639)
* newline, deleting: Limitations of Usual Tools.
(line 988)
* Newlines in Makefile rules: Newlines in Make Rules.
(line 6)
* Notices in configure: Notices. (line 6)
* null pointers: Null Pointers. (line 6)
* obj/, subdirectory: obj/ and Make. (line 6)
* OBJCFLAGS: Preset Output Variables.
(line 160)
* OBJCXXFLAGS: Preset Output Variables.
(line 164)
* Obsolete constructs: Obsolete Constructs. (line 6)
* Obsoleting macros: Obsoleting Macros. (line 6)
* obstack: Particular Functions.
(line 319)
* oldincludedir: Installation Directory Variables.
(line 65)
* One-shot macros: One-Shot Macros. (line 6)
* Options, package: Package Options. (line 6)
* Options, Package: Option Checking. (line 6)
* Ordering macros: Suggested Ordering. (line 6)
* Output variables: Preset Output Variables.
(line 6)
* Output variables <1>: Setting Output Variables.
(line 6)
* Output variables, special characters in: Special Chars in Variables.
(line 6)
* output, low-level: File Descriptor Macros.
(line 6)
* Outputting files: Output. (line 6)
* overflow, signed integer: Integer Overflow. (line 6)
* overflow, signed integer <1>: Integer Overflow Basics.
(line 6)
* overflow, signed integer <2>: Signed Overflow Examples.
(line 6)
* overflow, signed integer <3>: Signed Overflow Advice.
(line 6)
* Package options: Package Options. (line 6)
* package.m4: Making testsuite Scripts.
(line 12)
* Parallel make: Parallel Make. (line 6)
* parentheses, balancing: Balancing Parentheses.
(line 6)
* Patterns, forbidden: Forbidden Patterns. (line 6)
* pdfdir: Installation Directory Variables.
(line 68)
* polymorphic variable name: Polymorphic Variables.
(line 6)
* portability: Varieties of Unportability.
(line 6)
* Portability of C functions: Function Portability.
(line 6)
* Portability of headers: Header Portability. (line 6)
* Portable C and C++ programming: Portable C and C++. (line 6)
* Portable shell programming: Portable Shell. (line 6)
* positional parameters: Shell Substitutions. (line 120)
* Posix termios headers: System Services. (line 74)
* Precious Variable: Setting Output Variables.
(line 65)
* prefix: Installation Directory Variables.
(line 71)
* Prefix for install: Default Prefix. (line 6)
* preprocessor arithmetic: Preprocessor Arithmetic.
(line 6)
* Preprocessors: Compilers and Preprocessors.
(line 6)
* prerequisite directories and VPATH: Tru64 Directory Magic.
(line 6)
* Prerequisite macros: Prerequisite Macros. (line 6)
* Program names, transforming: Transforming Names. (line 6)
* Programs, checking: Alternative Programs.
(line 6)
* psdir: Installation Directory Variables.
(line 76)
* QNX 4.25: Systemology. (line 36)
* quadrigraphs: Quadrigraphs. (line 6)
* quotation: Autoconf Language. (line 6)
* quotation <1>: M4 Quotation. (line 6)
* Remaking automatically: Automatic Remaking. (line 6)
* Revision: Notices. (line 18)
* Rule, Single Suffix Inference: Single Suffix Rules. (line 6)
* sbindir: Installation Directory Variables.
(line 79)
* Separated Dependencies: Single Suffix Rules. (line 9)
* set -b: Limitations of Builtins.
(line 683)
* set -e: Limitations of Builtins.
(line 600)
* set -m: Limitations of Builtins.
(line 683)
* set -n: Limitations of Builtins.
(line 707)
* Set manipulation: Set manipulation Macros.
(line 6)
* sharedstatedir: Installation Directory Variables.
(line 83)
* SHELL and make: The Make Macro SHELL.
(line 6)
* Shell assignments: Assignments. (line 6)
* Shell builtins: Limitations of Builtins.
(line 6)
* Shell file descriptors: File Descriptors. (line 6)
* Shell Functions: Shell Functions. (line 6)
* Shell here-documents: Here-Documents. (line 6)
* shell invocation: Invoking the Shell. (line 6)
* Shell parentheses: Parentheses. (line 6)
* Shell pattern matching: Shell Pattern Matching.
(line 6)
* Shell slashes: Slashes. (line 6)
* Shell substitutions: Shell Substitutions. (line 6)
* Shell variables: Special Shell Variables.
(line 6)
* Shellology: Shellology. (line 6)
* Signal handling in the shell: Signal Handling. (line 6)
* Signals, shells and: Signal Handling. (line 6)
* signed integer overflow: Integer Overflow. (line 6)
* signed integer overflow <1>: Integer Overflow Basics.
(line 6)
* signed integer overflow <2>: Signed Overflow Examples.
(line 6)
* signed integer overflow <3>: Signed Overflow Advice.
(line 6)
* Single Suffix Inference Rule: Single Suffix Rules. (line 6)
* Site defaults: Site Defaults. (line 6)
* Site details: Site Details. (line 6)
* Special shell variables: Special Shell Variables.
(line 6)
* srcdir: Configuration Actions.
(line 71)
* srcdir <1>: Preset Output Variables.
(line 193)
* standard input: File Descriptor Macros.
(line 6)
* Standard symbols: Standard Symbols. (line 6)
* Structure, checking: Structures. (line 6)
* Subdirectory configure: Subdirectories. (line 6)
* Substitutions in makefiles: Makefile Substitutions.
(line 6)
* Symbolic links: Limitations of Usual Tools.
(line 536)
* sysconfdir: Installation Directory Variables.
(line 87)
* System type: Specifying Target Triplets.
(line 6)
* System type <1>: Canonicalizing. (line 6)
* Systemology: Systemology. (line 6)
* Target triplet: Specifying Target Triplets.
(line 6)
* termios Posix headers: System Services. (line 74)
* test group: testsuite Scripts. (line 12)
* testsuite: testsuite Scripts. (line 6)
* testsuite <1>: testsuite Invocation.
(line 6)
* timestamp resolution: Limitations of Usual Tools.
(line 221)
* timestamp resolution <1>: Limitations of Usual Tools.
(line 975)
* timestamp resolution <2>: Timestamps and Make. (line 6)
* tmp: Configuration Actions.
(line 89)
* top_builddir: Preset Output Variables.
(line 178)
* top_build_prefix: Preset Output Variables.
(line 182)
* top_srcdir: Preset Output Variables.
(line 200)
* Transforming program names: Transforming Names. (line 6)
* Tru64: Systemology. (line 43)
* Types: Types. (line 6)
* unbalanced parentheses, managing: Balancing Parentheses.
(line 6)
* undefined macro: New Macros. (line 6)
* Unix version 7: Systemology. (line 48)
* Unordered set manipulation: Set manipulation Macros.
(line 6)
* Upgrading autoconf: Autoconf 1. (line 6)
* Upgrading autoconf <1>: Autoconf 2.13. (line 6)
* V7: Systemology. (line 48)
* variable name indirection: Polymorphic Variables.
(line 6)
* variable names, composing: Polymorphic Variables.
(line 128)
* Variable, Precious: Setting Output Variables.
(line 65)
* variables and VPATH: Variables listed in VPATH.
(line 6)
* Version: Versioning. (line 11)
* version, Autoconf: Versioning. (line 6)
* volatile objects: Volatile Objects. (line 6)
* VPATH: VPATH and Make. (line 6)
* VPATH and automatic rule rewriting: Automatic Rule Rewriting.
(line 6)
* VPATH and double-colon rules: VPATH and Double-colon.
(line 6)
* VPATH and prerequisite directories: Tru64 Directory Magic.
(line 6)
* VPATH and variables: Variables listed in VPATH.
(line 6)
* VPATH, explicit rules, and $<: $< in Explicit Rules.
(line 6)
* VPATH, resolving target pathnames: Make Target Lookup. (line 6)
* whitespace in command-line macros: Command-line Macros and whitespace.
(line 6)
* whitespace in Makefile macros: Trailing whitespace in Make Macros.
(line 6)
* wraparound arithmetic: Integer Overflow. (line 6)
* wraparound arithmetic <1>: Integer Overflow Basics.
(line 6)
* wraparound arithmetic <2>: Signed Overflow Examples.
(line 6)
* wraparound arithmetic <3>: Signed Overflow Advice.
(line 6)
* X Window System: System Services. (line 10)
* Zsh: Shellology. (line 86)
Tag Table:
Node: Top883
Node: Introduction20301
Node: The GNU Build System26853
Node: Automake27832
Node: Gnulib29780
Node: Libtool31089
Node: Pointers32510
Ref: Pointers-Footnote-133810
Node: Making configure Scripts33970
Node: Writing Autoconf Input37321
Node: Shell Script Compiler38784
Node: Autoconf Language41145
Node: Autoconf Input Layout48314
Node: autoscan Invocation49722
Node: ifnames Invocation52278
Node: autoconf Invocation53478
Node: autoreconf Invocation58762
Node: Setup63531
Node: Initializing configure64853
Ref: AC_INIT65358
Node: Versioning68248
Node: Notices70109
Node: Input71285
Ref: AC_CONFIG_SRCDIR71426
Node: Output74368
Ref: AC_OUTPUT74803
Ref: AC_PROG_MAKE_SET76422
Node: Configuration Actions76847
Node: Configuration Files82139
Ref: AC_CONFIG_FILES82400
Node: Makefile Substitutions83619
Node: Preset Output Variables85359
Node: Installation Directory Variables94844
Node: Changed Directory Variables102692
Node: Build Directories105286
Node: Automatic Remaking107141
Node: Configuration Headers109309
Node: Header Templates112605
Node: autoheader Invocation115339
Node: Autoheader Macros118984
Node: Configuration Commands121248
Ref: AC_CONFIG_COMMANDS121760
Node: Configuration Links123045
Ref: AC_CONFIG_LINKS123496
Node: Subdirectories124469
Node: Default Prefix126949
Ref: AC_PREFIX_PROGRAM127840
Node: Existing Tests128371
Node: Common Behavior130173
Node: Standard Symbols130812
Node: Default Includes131393
Node: Alternative Programs133647
Node: Particular Programs134333
Ref: AC_PROG_LEX140081
Ref: AC_PROG_LN_S142687
Node: Generic Programs144314
Ref: AC_CHECK_PROG145286
Ref: AC_CHECK_PROGS146010
Ref: AC_PATH_PROG150000
Ref: AC_PATH_PROGS150372
Node: Files153443
Node: Libraries154643
Ref: AC_CHECK_LIB154884
Ref: AC_SEARCH_LIBS157143
Node: Library Functions158327
Node: Function Portability158950
Node: Particular Functions168461
Ref: AC_FUNC_ALLOCA168792
Ref: AC_FUNC_CLOSEDIR_VOID171182
Ref: AC_FUNC_FORK173171
Ref: AC_FUNC_GETLOADAVG175213
Ref: AC_FUNC_GETMNTENT176778
Ref: AC_FUNC_MMAP181040
Ref: AC_FUNC_STRCOLL183895
Ref: AC_FUNC_STRFTIME184865
Ref: AC_FUNC_UTIME_NULL186147
Ref: AC_FUNC_VPRINTF186495
Node: Generic Functions187711
Ref: AC_CHECK_FUNC188237
Ref: AC_CHECK_FUNCS188866
Node: Header Files193492
Node: Header Portability194125
Node: Particular Headers197220
Ref: AC_HEADER_DIRENT198259
Ref: AC_HEADER_MAJOR199789
Ref: AC_HEADER_STAT200574
Ref: AC_HEADER_STDC202082
Ref: AC_HEADER_TIME206816
Node: Generic Headers208203
Ref: AC_CHECK_HEADER208603
Ref: AC_CHECK_HEADERS210476
Node: Declarations213041
Node: Particular Declarations213637
Node: Generic Declarations213861
Ref: AC_CHECK_DECLS215244
Node: Structures217768
Node: Particular Structures218383
Ref: AC_STRUCT_ST_BLOCKS219452
Ref: AC_STRUCT_TIMEZONE220148
Node: Generic Structures220477
Ref: AC_CHECK_MEMBERS221466
Node: Types222297
Node: Particular Types222817
Ref: AC_TYPE_GETGROUPS223260
Ref: AC_TYPE_MODE_T226296
Ref: AC_TYPE_OFF_T226479
Ref: AC_TYPE_PID_T226659
Ref: AC_TYPE_SIZE_T226839
Ref: AC_TYPE_UID_T227208
Node: Generic Types228853
Node: Compilers and Preprocessors230997
Node: Specific Compiler Characteristics232271
Node: Generic Compiler Characteristics233376
Ref: AC_CHECK_SIZEOF233616
Node: C Compiler238402
Ref: AC_PROG_CC_C_O242854
Ref: AC_C_BIGENDIAN246662
Ref: AC_C_CONST248504
Ref: AC_C_INLINE251822
Ref: AC_C_CHAR_UNSIGNED252045
Ref: AC_PROG_GCC_TRADITIONAL254668
Node: C++ Compiler255079
Node: Objective C Compiler257475
Node: Objective C++ Compiler258848
Node: Erlang Compiler and Interpreter260298
Node: Fortran Compiler262335
Node: Go Compiler287629
Node: System Services288674
Ref: AC_PATH_X288919
Ref: AC_PATH_XTRA289913
Ref: AC_SYS_INTERPRETER290489
Ref: AC_SYS_LONG_FILE_NAMES291901
Node: Posix Variants292278
Ref: AC_USE_SYSTEM_EXTENSIONS292578
Node: Erlang Libraries293655
Node: Writing Tests298596
Node: Language Choice300620
Ref: AC_LANG301117
Ref: AC_LANG_PUSH302924
Ref: Language Choice-Footnote-1304797
Node: Writing Test Programs304953
Node: Guidelines305531
Node: Test Functions307791
Node: Generating Sources309189
Node: Running the Preprocessor315221
Ref: AC_PREPROC_IFELSE315953
Ref: AC_EGREP_HEADER317883
Ref: AC_EGREP_CPP318212
Node: Running the Compiler318638
Node: Running the Linker320393
Ref: AC_LINK_IFELSE321533
Node: Runtime322408
Ref: AC_RUN_IFELSE323183
Node: Systemology328030
Node: Multiple Cases330379
Node: Results332080
Node: Defining Symbols332899
Node: Setting Output Variables337791
Node: Special Chars in Variables343683
Node: Caching Results344943
Node: Cache Variable Names348661
Node: Cache Files350311
Node: Cache Checkpointing352636
Node: Printing Messages354010
Ref: AC_MSG_RESULT355524
Ref: AC_MSG_NOTICE356026
Ref: AC_MSG_ERROR356390
Ref: AC_MSG_WARN357221
Node: Programming in M4357644
Node: M4 Quotation358449
Node: Active Characters359418
Ref: Active Characters-Footnote-1360808
Ref: Active Characters-Footnote-2360922
Node: One Macro Call360944
Node: Quoting and Parameters362499
Node: Quotation and Nested Macros364835
Node: Changequote is Evil367845
Node: Quadrigraphs370374
Node: Balancing Parentheses373050
Node: Quotation Rule Of Thumb377145
Node: Using autom4te380043
Ref: Using autom4te-Footnote-1380694
Node: autom4te Invocation380743
Node: Customizing autom4te389261
Node: Programming in M4sugar390542
Node: Redefined M4 Macros391723
Node: Diagnostic Macros400024
Ref: m4_fatal400775
Ref: m4_warn401014
Node: Diversion support401785
Node: Conditional constructs409562
Node: Looping constructs416414
Ref: m4_foreach_w420025
Node: Evaluation Macros427371
Node: Text processing Macros436060
Node: Number processing Macros445755
Ref: m4_version_compare447706
Node: Set manipulation Macros450010
Node: Forbidden Patterns459117
Node: Debugging via autom4te460608
Node: Programming in M4sh462425
Node: Common Shell Constructs463799
Node: Polymorphic Variables471759
Node: Initialization Macros481329
Node: File Descriptor Macros486916
Ref: AS_MESSAGE_LOG_FD488067
Node: Writing Autoconf Macros489569
Node: Macro Definitions490374
Node: Macro Names494035
Node: Reporting Messages497786
Node: Dependencies Between Macros499630
Node: Prerequisite Macros500325
Node: Suggested Ordering506400
Node: One-Shot Macros507943
Node: Obsoleting Macros509296
Ref: AU_DEFUN510049
Node: Coding Style511078
Node: Portable Shell518871
Node: Shellology523178
Node: Invoking the Shell527345
Node: Here-Documents528527
Node: File Descriptors532148
Node: Signal Handling538587
Node: File System Conventions543795
Node: Shell Pattern Matching549606
Node: Shell Substitutions550170
Node: Assignments568030
Node: Parentheses569921
Node: Slashes570877
Node: Special Shell Variables571731
Node: Shell Functions585061
Node: Limitations of Builtins588468
Ref: case592490
Ref: echo597646
Ref: export604610
Ref: if608025
Ref: set611837
Ref: trap623551
Ref: unset627362
Node: Limitations of Usual Tools628457
Ref: awk628756
Ref: grep646845
Ref: mkdir652472
Ref: sed658292
Ref: touch669421
Node: Portable Make672695
Node: $< in Ordinary Make Rules674357
Node: Failure in Make Rules674823
Node: Special Chars in Names675851
Node: Backslash-Newline-Empty676823
Node: Backslash-Newline Comments677855
Node: Long Lines in Makefiles678744
Node: Macros and Submakes679119
Node: The Make Macro MAKEFLAGS681806
Node: The Make Macro SHELL682691
Node: Parallel Make685192
Node: Comments in Make Rules688876
Node: Newlines in Make Rules690046
Node: Comments in Make Macros691091
Node: Trailing whitespace in Make Macros692301
Node: Command-line Macros and whitespace693052
Node: obj/ and Make693722
Node: make -k Status694373
Node: VPATH and Make694995
Node: Variables listed in VPATH696319
Node: VPATH and Double-colon696858
Node: $< in Explicit Rules697264
Node: Automatic Rule Rewriting697731
Node: Tru64 Directory Magic704413
Node: Make Target Lookup705239
Node: Single Suffix Rules709681
Node: Timestamps and Make711027
Node: Portable C and C++712710
Node: Varieties of Unportability714351
Node: Integer Overflow716448
Node: Integer Overflow Basics717461
Node: Signed Overflow Examples719209
Node: Optimization and Wraparound722711
Node: Signed Overflow Advice725673
Node: Signed Integer Division728347
Node: Preprocessor Arithmetic728958
Node: Null Pointers729707
Node: Buffer Overruns730341
Node: Volatile Objects733132
Node: Floating Point Portability738809
Node: Exiting Portably739316
Node: Manual Configuration740792
Node: Specifying Target Triplets741625
Ref: Specifying Names741798
Node: Canonicalizing744673
Node: Using System Type746936
Node: Site Configuration749737
Node: Help Formatting750709
Node: External Software751653
Ref: AC_ARG_WITH753199
Node: Package Options757524
Ref: AC_ARG_ENABLE758979
Node: Pretty Help Strings760140
Ref: AS_HELP_STRING760726
Node: Option Checking763064
Node: Site Details764793
Node: Transforming Names766022
Node: Transformation Options767104
Node: Transformation Examples767581
Node: Transformation Rules769303
Node: Site Defaults770849
Node: Running configure Scripts776190
Node: Basic Installation777255
Node: Compilers and Options781352
Node: Multiple Architectures782006
Node: Installation Names783586
Node: Optional Features786482
Node: Particular Systems787836
Node: System Type789260
Node: Sharing Defaults790588
Node: Defining Variables791227
Node: configure Invocation792125
Node: config.status Invocation793831
Ref: CONFIG_SHELL797573
Node: Obsolete Constructs798739
Node: Obsolete config.status Use799702
Node: acconfig Header801480
Node: autoupdate Invocation803503
Node: Obsolete Macros805369
Ref: AC_FUNC_SETVBUF_REVERSED813011
Ref: AC_TYPE_SIGNAL829555
Node: Autoconf 1832531
Node: Changed File Names833597
Node: Changed Makefiles834347
Node: Changed Macros835435
Node: Changed Results836688
Node: Changed Macro Writing838811
Node: Autoconf 2.13840091
Node: Changed Quotation841299
Node: New Macros843217
Node: Hosts and Cross-Compilation845012
Node: AC_LIBOBJ vs LIBOBJS849166
Node: AC_ACT_IFELSE vs AC_TRY_ACT850781
Ref: AC_FOO_IFELSE vs AC_TRY_FOO850970
Node: Using Autotest852783
Node: Using an Autotest Test Suite855187
Node: testsuite Scripts855478
Node: Autotest Logs859960
Node: Writing Testsuites862301
Node: testsuite Invocation879328
Node: Making testsuite Scripts884672
Node: FAQ889808
Node: Distributing890668
Node: Why GNU M4891715
Node: Bootstrapping892584
Node: Why Not Imake893194
Node: Defining Directories897940
Node: Autom4te Cache900081
Node: Present But Cannot Be Compiled901919
Node: Expanded Before Required905636
Node: Debugging910534
Node: History915537
Node: Genesis916406
Node: Exodus917584
Node: Leviticus920630
Node: Numbers922158
Node: Deuteronomy924073
Node: GNU Free Documentation License926743
Node: Indices951888
Node: Environment Variable Index952607
Node: Output Variable Index963947
Node: Preprocessor Symbol Index981464
Node: Cache Variable Index1000234
Node: Autoconf Macro Index1011705
Node: M4 Macro Index1046034
Node: Autotest Macro Index1066784
Node: Program & Function Index1069187
Node: Concept Index1090597
End Tag Table
Local Variables:
coding: utf-8
End: